Controlling aggregation-induced emission by supramolecular interactions and colloidal stability in ionic emitters for light-emitting electrochemical cells.

Chromophores face applicability limitations due to their natural tendency to aggregate, with a subsequent deactivation of their emission features. Hence, there has been a fast development of aggregation induced emission (AIE) emitters, in which non-radiative motional deactivation is inhibited. However, a fine control of their colloidal properties governing the emitting performance is fundamental for their application in thin film optoelectronics. In addition, ion-based lighting devices, such as light emitting electrochemical cells (LECs), requires the design of ionic AIE emitters, whose structure allows (i) an easy ion polarizability to assist charge injection and (ii) a reversible electrochemical behavior. To date, these fundamental questions have not been addressed. Herein, the hydrophilic/hydrophobic balance of a family of cationic tetraphenyl ethene (TPE) derivatives is finely tuned by chemical design. The hydrophilic yet repulsive effect of pyridinium-based cationic moieties is balanced with hydrophobic variables (long alkyl chains or counterion chemistry), leading to (i) a control between monomeric/aggregate state ruling photoluminescence, (ii) redox behavior, and (iii) enhanced ion conductivity in thin films. This resulted in a LEC enhancement with the first ionic AIE emitters, reaching values of 0.19 lm W-1 at ca. 50 cd m-2. Overall, this design rule will be key to advance ionic active species for optoelectronics.

Hierarchical peroxiredoxin assembly through orthogonal pH-response and electrostatic interactions.

Morpheeins are proteins that adapt their morphology and function to the environment. Therefore, their use in nanotechnology opens up the bottom-up preparation of anisotropic metamaterials, based on the sequential use of different stimuli. A prominent member of this family of proteins is peroxiredoxins (Prx), with dual peroxidase and chaperone function, depending on the pH of the media. At high pH, they show a toroidal morphology that turns into tubular stacks upon acidification. While the toroidal conformers have been explored as building blocks to yield 1D and 2D structures, the obtention of higher ordered materials remain unexplored. In this research, the morpheein behaviour of Prx is exploited to yield columnar aggregates, that are subsequently self-assembled into 3D anisotropic bundles. This is achieved by electrostatic recognition between the negatively charged protein rim and a positively charged porphyrin acting as molecular glue. The subsequent and orthogonal input lead to the alignment of the monodimensional stacks side-by-side, leading to the precise assembly of this anisotropic materials.

Assembly and optically triggered disassembly of lipid-DNA origami fibers.

The co-assembly of lipids and other compounds has recently gained increasing interest. Here, we report the formation of stimuli-responsive lipid-DNA origami fibers through the electrostatic co-assembly of cationic lipids and 6-helix bundle (6HB) DNA origami. The photosensitive lipid degrades when exposed to UV-A light, which allows a photoinduced, controlled release of the 6HBs from the fibers. The presented complexation strategy may find uses in developing responsive nanomaterials e.g. for therapeutics.

Supercharged Fluorescent Protein-Apoferritin Cocrystals for Lighting Applications.

The application of fluorescent proteins (FPs) in optoelectronics is hindered by the need for effective protocols to stabilize them under device preparation and operational conditions. Factors such as high temperatures, irradiation, and organic solvent exposure contribute to the denaturation of FPs, resulting in a low device performance. Herein, we focus on addressing the photoinduced heat generation associated with FP motion and rapid heat transfer. This leads to device temperatures of approximately 65 °C, causing FP-denaturation and a subsequent loss of device functionality. We present a FP stabilization strategy involving the integration of electrostatically self-assembled FP-apoferritin cocrystals within a silicone-based color down-converting filter. Three key achievements characterize this approach: (i) an engineering strategy to design positively supercharged FPs (+22) without compromising photoluminescence and thermal stability compared to their native form, (ii) a carefully developed crystallization protocol resulting in highly emissive cocrystals that retain the essential photoluminescence features of the FPs, and (iii) a strong reduction of the device's working temperature to 40 °C, leading to a 40-fold increase in Bio-HLEDs stability compared to reference devices.

Stable glycosylamines at the reducing ends of cellulose nanocrystals.

The reaction of reducing end groups in cellulose nanocrystals with dodecylamine was examined. Using a direct-dissolution solution-state NMR protocol, the regioselective formation of glucosylamines was shown. This provides an elegant approach to sustainably functionalize these bio-based nanomaterials, that may not require further reduction to more stable secondary amines.

DNA-origami-directed virus capsid polymorphism.

Viral capsids can adopt various geometries, most iconically characterized by icosahedral or helical symmetries. Importantly, precise control over the size and shape of virus capsids would have advantages in the development of new vaccines and delivery systems. However, current tools to direct the assembly process in a programmable manner are exceedingly elusive. Here we introduce a modular approach by demonstrating DNA-origami-directed polymorphism of single-protein subunit capsids. We achieve control over the capsid shape, size and topology by employing user-defined DNA origami nanostructures as binding and assembly platforms, which are efficiently encapsulated within the capsid. Furthermore, the obtained viral capsid coatings can shield the encapsulated DNA origami from degradation. Our approach is, moreover, not limited to a single type of capsomers and can also be applied to RNA-DNA origami structures to pave way for next-generation cargo protection and targeting strategies.

Protein Coating of DNA Origami.

DNA origami has emerged as a common technique to create custom two- (2D) and three-dimensional (3D) structures at the nanoscale. These DNA nanostructures have already proven useful in development of many biotechnological tools; however, there are still challenges that cast a shadow over the otherwise bright future of biomedical uses of these DNA objects. The rather obvious obstacles in harnessing DNA origami as drug-delivery vehicles and/or smart biodevices are related to their debatable stability in biologically relevant media, especially in physiological low-cation and endonuclease-rich conditions, relatively poor transfection rates, and, although biocompatible by nature, their unpredictable compatibility with the immune system. Here we demonstrate a technique for coating DNA origami with albumin proteins for enhancing their pharmacokinetic properties. To facilitate protective coating, a synthesized positively charged dendron was linked to bovine serum albumin (BSA) through a covalent maleimide-cysteine bonding, and then the purified dendron-protein conjugates were let to assemble on the negatively charged surface of DNA origami via electrostatic interaction. The resulted BSA-dendron conjugate-coated DNA origami showed improved transfection, high resistance against endonuclease digestion, and significantly enhanced immunocompatibility compared to bare DNA origami. Furthermore, our proposed coating strategy can be considered highly versatile as a maleimide-modified dendron serving as a synthetic DNA-binding domain can be linked to any protein with an available cysteine site.

Reconfigurable pH-Responsive DNA Origami Lattices.

DNA nanotechnology enables straightforward fabrication of user-defined and nanometer-precise templates for a cornucopia of different uses. To date, most of these DNA assemblies have been static, but dynamic structures are increasingly coming into view. The programmability of DNA not only allows for encoding of the DNA object shape but also it may be equally used in defining the mechanism of action and the type of stimuli-responsiveness of the dynamic structures. However, these "robotic" features of DNA nanostructures are usually demonstrated for only small, discrete, and device-like objects rather than for collectively behaving higher-order systems. Here, we show how a large-scale, two-dimensional (2D) and pH-responsive DNA origami-based lattice can be assembled into two different configurations ("open" and "closed" states) on a mica substrate and further switched from one to the other distinct state upon a pH change of the surrounding solution. The control over these two configurations is achieved by equipping the arms of the lattice-forming DNA origami units with "pH-latches" that form Hoogsteen-type triplexes at low pH. In short, we demonstrate how the electrostatic control over the adhesion and mobility of the DNA origami units on the surface can be used both in the large lattice formation (with the help of directed polymerization) and in the conformational switching of the whole lattice. To further emphasize the feasibility of the method, we also demonstrate the formation of pH-responsive 2D gold nanoparticle lattices. We believe this work can bridge the nanometer-precise DNA origami templates and higher-order large-scale systems with the stimuli-induced dynamicity.

Repurposing host-guest chemistry to sequester virulence and eradicate biofilms in multidrug resistant Pseudomonas aeruginosa and Acinetobacter baumannii.

The limited diversity in targets of available antibiotic therapies has put tremendous pressure on the treatment of bacterial pathogens, where numerous resistance mechanisms that counteract their function are becoming increasingly prevalent. Here, we utilize an unconventional anti-virulence screen of host-guest interacting macrocycles, and identify a water-soluble synthetic macrocycle, Pillar[5]arene, that is non-bactericidal/bacteriostatic and has a mechanism of action that involves binding to both homoserine lactones and lipopolysaccharides, key virulence factors in Gram-negative pathogens. Pillar[5]arene is active against Top Priority carbapenem- and third/fourth-generation cephalosporin-resistant Pseudomonas aeruginosa and Acinetobacter baumannii, suppressing toxins and biofilms and increasing the penetration and efficacy of standard-of-care antibiotics in combined administrations. The binding of homoserine lactones and lipopolysaccharides also sequesters their direct effects as toxins on eukaryotic membranes, neutralizing key tools that promote bacterial colonization and impede immune defenses, both in vitro and in vivo. Pillar[5]arene evades both existing antibiotic resistance mechanisms, as well as the build-up of rapid tolerance/resistance. The versatility of macrocyclic host-guest chemistry provides ample strategies for tailored targeting of virulence in a wide range of Gram-negative infectious diseases.

Reply to "Where is the Macrocycle?" Correspondence on "Simultaneous Organic and Inorganic Host-guest Chemistry within Pillararene-Protein Cage Frameworks".

Our recent publication in Chem. Eur. J. 2022, 28, e202104341 has inspired Prof. Peter B. Crowley (P.C.) to write a Correspondence questioning the presented concept of electrostatic self-assembly. The offered criticism is twofold: 1) the role of the cationic pillar[5]arene macrocycle to act as molecular glue in the formation of electrostatically driven protein assemblies is questioned by arguing that the pillararene is not incorporated into the frameworks. 2) Later, P.C. speculates that when the frameworks form, the role of electrostatic interactions is not firmly established and cation-pi bonding is the more plausible interaction. In this response, the raised comments are addressed. We present direct experimental NMR evidence showing that the pillar[5]arene is incorporated into the frameworks. Furthermore, we discuss the electrostatic self-assembly and our ferritin-related research line more broadly and clarify the role of key experiments.

Core-Shell Structured Fluorescent Protein Nanoparticles: New Paradigm Toward Zero-Thermal-Quenching in High-Power Biohybrid Light-Emitting Diodes.

Stable and efficient high-power biohybrid light-emitting diodes (Bio-HLEDs) using fluorescent proteins (FPs) in photon downconverting filters have not been achieved yet, reaching best efficiencies of 130 lm W-1 stable for >5 h. This is related to the rise of the device temperature (70-80 °C) caused by FP-motion and quick heat-transmission in water-based filters, they lead to a strong thermal emission quenching followed by the quick chromophore deactivation via photoinduced H-transfer. To tackle both issues at once, this work shows an elegant concept of a new FP-based nanoparticle, in which the FP core is shielded by a SiO2 -shell (FP@SiO2 ) with no loss of the photoluminescence figures-of-merit over years in foreign environments: dry powder at 25 °C (ambient) or constant 50 °C, as well as suspensions in organic solvents. This enables the preparation of water-free photon downconverting coatings with FP@SiO2 , realizing on-chip high-power Bio-HLEDs with 100 lm W-1 stable for >120 h. Both thermal emission quenching and H-transfer deactivation are suppressed, since the device temperature holds <40 °C and remote high-power Bio-HLEDs exhibit final stabilities of 130 days compared to reference devices with water-based FP@SiO2 (83 days) and FP-polymer coatings (>100 h). Hence, FP@SiO2 is a new paradigm toward water-free zero-thermal-quenching biophosphors for first-class high-power Bio-HLEDs.

Optically Controlled Construction of Three-Dimensional Protein Arrays.

Protein crystallization is an important tool for structural biology and nanostructure preparation. Here, we report on kinetic pathway-dependent protein crystals that are controlled by light. Photo-responsive crystallites are obtained by complexing the model proteins with cationic azobenzene dyes. The crystalline state is readily switched to a dispersed phase under ultraviolet light and restored by subsequent visible-light illumination. The switching can be reversibly repeated for multiple cycles without noticeable structure deterioration. Importantly, the photo-treatment not only significantly increases the crystallinity, but creates crystallites at conditions where no ordered lattices are observed upon directly mixing the components. Further control over the azobenzene isomerization kinetics produces protein single crystals of up to ≈50 µm. This approach offers an intriguing method to fabricate metamaterials and study optically controlled crystallization.

Engineered Protein Copolymers for Heparin Neutralization and Detection.

Heparin is a widely applied anticoagulant agent. However, in clinical practice, it is of vital importance to reverse its anticoagulant effect to restore the blood-clotting cascade and circumvent side effects. Inspired by protein cages that can encapsulate and protect their cargo from surroundings, we utilize three designed protein copolymers to sequester heparin into inert nanoparticles. In our design, a silk-like sequence provides cooperativity between proteins, generating a multivalency effect that enhances the heparin-binding ability. Protein copolymers complex heparin into well-defined nanoparticles with diameters below 200 nm. We also develop a competitive fluorescent switch-on assay for heparin detection, with a detection limit of 0.01 IU mL-1 in plasma that is significantly below the therapeutic range (0.2-8 IU mL-1). Moreover, moderate cytocompatibility is demonstrated by in vitro cell studies. Therefore, such engineered protein copolymers present a promising alternative for neutralizing and sensing heparin, but further optimization is required for in vivo applications.

Potato virus A particles - A versatile material for self-assembled nanopatterned surfaces.

Potato virus A (PVA) is a plant-infecting RNA virus that produces flexible particles with a high aspect ratio. PVA has been investigated extensively for its infection biology, however, its potential to serve as a nanopatterning platform remains unexplored. Here, we study the liquid crystal and interfacial self-assembly behavior of PVA particles. Furthermore, we generate nanopatterned surfaces using self-assembled PVA particles through three different coating techniques: drop-casting, drop-top deposition and flow-coating. The liquid crystal phase of PVA solution visualized by polarized optical microscopy revealed a chiral nematic phase in water, while in pH 8 buffer it produced a nematic phase. This allowed us to produce thin films with either randomly or anisotropically oriented cylindrical nanopatterns using drop-top and flow-coating methods. Overall, this study explores the self-assembly process of PVA in different conditions, establishing a starting point for PVA self-assembly research and contributing a virus-assisted fabrication technique for nanopatterned surfaces.

A Synthetic Protocell-Based Heparin Scavenger.

Heparin is a commonly applied blood anticoagulant agent in clinical use. After treatment, excess heparin needs to be removed to circumvent side effects and recover the blood-clotting cascade. Most existing heparin antidotes rely on direct heparin binding and complexation, yet selective compartmentalization and sequestration of heparin would be beneficial for safety and efficiency. However, such systems have remained elusive. Herein, a semipermeable protein-based microcompartment (proteinosome) is loaded with a highly positively charged chitosan derivative, which can induce electrostatics-driven internalization of anionic guest molecules inside the compartment. Chitosan-loaded proteinosomes are subsequently employed to capture heparin, and an excellent heparin-scavenging performance is demonstrated under physiologically relevant conditions. Both the highly positive scavenger and the polyelectrolyte complex are confined and shielded by the protein compartment in a time-dependent manner. Moreover, selective heparin-scavenging behavior over serum albumin is realized through adjusting the localized scavenger or surrounding salt concentrations at application-relevant circumstances. In vitro studies reveal that the cytotoxicity of the cationic scavenger and the produced polyelectrolyte complex is reduced by protocell shielding. Therefore, the proteinosome-based systems may present a novel polyelectrolyte-scavenging method for biomedical applications.

Optically Responsive Protein Coating of DNA Origami for Triggered Antigen Targeting.

DNA nanostructures have emerged as modular building blocks in several research fields including biomedicine and nanofabrication. Their proneness to degradation in various environments has led to the development of a variety of nature-inspired protection strategies. Coating of DNA origami nanostructures with proteins can circumvent degradation and alter their properties. Here, we have used a single-chain variable antibody fragment and serum albumin to construct positively charged and stimuli-responsive protein-dendron conjugates, which were complexed with DNA origami through electrostatic interactions. Using a stepwise assembly approach, the coated nanostructures were studied for their interaction with the corresponding antigen in fluorescence-based immunoassays. The results suggest that the antibody-antigen interaction can be disturbed by the addition of the bulky serum albumin. However, this effect is fully reversible upon irradiation of the structures with an optical stimulus. This leads to a selective dissociation of the serum albumin from the nanostructure due to cleavage of a photolabile group integrated in the dendron structure, exposing the antibody fragment and enabling triggered binding to the antigen, demonstrating that serum albumin can be considered as an externally controlled "camouflaging" agent. The presented stimuli-responsive complexation approach is highly versatile regarding the choice of protein components and could, therefore, find use in DNA origami protection, targeting, and delivery as well as their spatiotemporal control.

A Greener Route to Blue: Solid-State Synthesis of Phthalocyanines.

Phthalocyanines are important organic dyes with a broad applicability in optoelectronics, catalysis, sensing and nanomedicine. Currently, phthalocyanines are synthetized in high boiling organic solvents, like dimethylaminoethanol (DMAE), which is a flammable, corrosive, and bioactive substance, miscible with water and harmful to the environment. Here we show a new solid-state approach for the high-yielding synthesis of phthalocyanines, which reduces up to 100-fold the amount of DMAE. Through systematic screening of solid-state reaction parameters, carried out by ball-milling and aging, we reveal the influence of key variables-temperature, presence of a template, and the amount and role of DMAE in the conversion of tBu phthalonitrile to tetra-tBu phthalocyanine. These results set the foundations to synthesize these high-performance dyes through a greener approach, opening the field of solid-state synthesis to a wider family of phthalocyanines.

From Precision Colloidal Hybrid Materials to Advanced Functional Assemblies.

The concept of colloids encompasses a wide range of isotropic and anisotropic particles with diverse sizes, shapes, and functions from synthetic nanoparticles, nanorods, and nanosheets to functional biological units. They are addressed in materials science for various functions, while they are ubiquitous in the biological world for multiple functions. A large variety of synthetic colloids have been researched due to their scientific and technological importance; still they characteristically suffer from finite size distributions, imperfect shapes and interactions, and not fully engineered functions. This contrasts with biological colloids that offer precision in their size, shape, and functionality. Materials science has searched for inspiration from the biological world to allow structural control by self-assembly and hierarchy and to identify novel routes for combinations of functions in bio-inspiration.Herein, we first discuss different approaches for highly defined structural control of technically relevant synthetic colloids based on guided assemblies of biological motifs. First, we describe how polydisperse nanoparticles can be assembled within hollow protein cages to allow well-defined assemblies and hierarchical packings. Another approach relies on DNA nanotechnology-based assemblies, where engineered DNA structures allow programmed assembly. Then we will discuss synthetic colloids that have either particularly narrow size dispersity or even atomically precise structures for new assemblies and potential functions. Such colloids can have well-defined packings for membranes allowing high modulus. They can be switchable using light-responsive moieties, and they can initiate packing of larger assemblies of different geometrical shapes. The emphasis is on atomically defined nanoclusters that allow well-defined assemblies by supramolecular interactions, such as directional hydrogen bonding. Finally, we will discuss stimulus-responsive colloids for new functions, even toward complex responsive functions inspired by life. Therein, stimulus-responsive materials inspired by biological learning could allow the next generation of such materials. Classical conditioning is among the simplest biological learning concepts, requiring two stimuli and triggerable memory. Therein we use thermoresponsive hydrogels with plasmonic gold nanoparticles and a spiropyran photoacid as a model. Heating is the unconditioned stimulus leading to melting of the thermoresponsive gel, whereas light (at a specified wavelength) originally leads to reduced pH without plasmonic or structural changes because of steric gel stabilization. Under heat-induced gel melting, light results in pH-decrease and chain-like aggregation of the gold nanoparticles, allowing a new plasmonic response. Thus, simultaneous heating and light irradiation allow conditioning for a newly derived stimulus, where the logic diagram is analogous to Pavlovian conditioning. The shown assemblies demonstrate the different functionalities achievable using colloids when the sizes and the dispersity are controlled.

Environment-Dependent Stability and Mechanical Properties of DNA Origami Six-Helix Bundles with Different Crossover Spacings.

The internal design of DNA nanostructures defines how they behave in different environmental conditions, such as endonuclease-rich or low-Mg2+ solutions. Notably, the inter-helical crossovers that form the core of such DNA objects have a major impact on their mechanical properties and stability. Importantly, crossover design can be used to optimize DNA nanostructures for target applications, especially when developing them for biomedical environments. To elucidate this, two otherwise identical DNA origami designs are presented that have a different number of staple crossovers between neighboring helices, spaced at 42- and 21- basepair (bp) intervals, respectively. The behavior of these structures is then compared in various buffer conditions, as well as when they are exposed to enzymatic digestion by DNase I. The results show that an increased number of crossovers significantly improves the nuclease resistance of the DNA origami by making it less accessible to digestion enzymes but simultaneously lowers its stability under Mg2+ -free conditions by reducing the malleability of the structures. Therefore, these results represent an important step toward rational, application-specific DNA nanostructure design.