Photoresponse of new azo pyridine functionalized poly(2-hydroxyethyl methacrylate-co-methyl methacrylate).

A new azo polymer containing photoisomerizable azo pyridine functionalities was synthesized via Mitsunobu reaction of 4-(4-hydroxyphenylazo)pyridine with poly(2-hydroxyethyl methacrylate-co-methyl methacrylate) (p(HEMA-co-MMA)) for creating new photochromic materials. The resulting polymer with azo pyridine side groups was characterized for structural, thermal, and optical properties. UV-vis, 1H NMR and IR spectroscopies confirmed that all hydroxyl groups in p(HEMA-co-MMA) were substituted with azo dye. The obtained azo copolymer exhibited high thermal stability (around 240 °C) and a glass transition temperature (113 °C), promising for applications. The trans-to-cis isomerization upon UV irradiation and the thermal back reaction of the azo chromophore in the copolymer in the solid state was studied. A photostationary state with 50% content of cis-isomers upon 6 min of UV irradiation was reached, and during 48 h dark relaxation at ambient temperature, all cis-isomers converted to the trans form. Additionally, the possibility of efficient photogeneration of surface relief gratings with high amplitude of azo copolymer surface modulation was demonstrated.

Effect of N-phenyl substituent on thermal, optical, electrochemical and luminescence properties of 3-aminophthalimide derivatives.

The seven N-phthalimide derivatives substituted with the amine group at the 3-C position in the phenylene ring were synthesized. The effect of N-substituent chemical structure was investigated. The thermal, electrochemical and optical studies were performed and supported by the density functional theory calculations (DFT). The electrochemical investigations of the synthesized low-molecular phthalimides revealed the one oxidation and reduction process with the HOMO energy level under - 5.81 eV and energy-band gap below 3 eV. The N-phthalimide derivatives were emitted light in a blue spectral region in solutions (in polar and non-polar) with the quantum yield between 2 and 68%, dependent on the substituent at the nitrogen atom, solvent and concentration. The N-phthalimide derivatives were emissive also in a solid state as a thin film and powder. They were tested as a component of the active layer with PVK:PBD matrix and as an independent active layer in the organic light-emitting diodes. The registered electroluminescence spectra exhibited the maximum emission band in the 469-505 nm range, confirming the possibility of using N-phthalimides with PVK:PBD matrix as the blue emitters.

Spectroscopic and Biological Properties of the 3-Imino-1,8-naphthalimide Derivatives as Fluorophores for Cellular Imaging.

This paper presents the photophysical and biological properties of eight 3-imino-1,8-naphthalimides. The optical properties of the compounds were investigated in the solvents that differed in their polarity (dichloromethane, acetonitrile, and methanol), including three methods of sample preparation using different pre-dissolving solvents such as dimethyl sulfoxide or chloroform. In the course of the research, it was found that there are strong interactions between the tested compounds and DMSO, which was visible as a change in the maximum emission band (λem) of the neat 3-imino-1,8-naphthalimides (λem = 470-480 nm) and between the compounds and DMSO (λem = 504-514 nm). The shift of the emission maximum that was associated with the presence of a small amount of DMSO in the sample was as much as 41 nm. In addition, the susceptibility of imines to hydrolysis in the methanol/water mixture with increasing water content and in the methanol/water mixture (v/v; 1:1) in the pH range from 1 to 12 was discussed. The studies showed that the compounds are hydrolysed in the CH3OH/H2O system in an acidic environment (pH in the range of 1 to 4). In addition, it was found that partial hydrolysis occurs in systems with an increased amount of water, and its degree may depend on the type of substituent on the imine bond. The compounds tended to quench the emission (ACQ) in the aggregated state and increase the emission related to the protonation of the imine bond. Moreover, it was found that the substituent in the imine bonds influenced a compound's individual photophysical properties. Biological tests, including cytotoxicity studies and cellular localisation, were also performed for all of the molecules. All of the tested compounds exhibited green fluorescence in the MCF-7 cells and showed co-localisation in the mitochondria, endoplasmic reticulum, and lysosome. The obtained photophysical and biological results indicate the promising potential use of the tested compounds as cellular dyes.

Effect of substituent structure in fluorene based compounds: Experimental and theoretical study.

Fluorene-based low molar weight derivatives were synthesized in Suzuki reactions by using key starting materials 9-benzylidene-2,7-dibromofluorene or 3-(2,7-dibromofluoren-9-ylmethylen)-9-ethylcarbazole and various aryl boronic acids. Photophysical properties of the compounds were investigated in different solutions as well as in solid state. The thermal investigations showed that the obtained compounds are highly thermally stable with temperatures of 5% mass loss (T5%) in the range of 311-432 °C. Some of the compounds also exhibited very high glass transition temperatures exceeding 125 °C. The presented molecules were electrochemically active and showed the energy band gap below 2.97 eV. The investigations were supported by DFT calculations and the photovoltaic ability of the presented compounds was tested in the organic-inorganic solar cells.

Six New Unsymmetrical Imino-1,8-naphthalimide Derivatives Substituted at 3-C Position-Photophysical Investigations.

In this research, six novel unsymmetrical imino-1,8-naphthalimides (AzNI) were synthesized. Comprehensive thermal (thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), optical (UV-Vis, photoluminescence), and electrochemical (CV, DPV) studies were carried out to characterize these new compounds. The molecules showed the onset of thermal decomposition in the temperature range 283-372 °C and molecular glass behavior. Imino-1,8-naphthalimides underwent reduction and oxidation processes with the electrochemical energy band gap (Eg) below 2.41 eV. The optical properties were evaluated in solvents with different polarities and in the solid-state as a thin films and binary blends with poly(N-vinylcarbazole): (2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole) (PVK:PBD). Presented compounds emitted blue light in the solutions and in the green or violet spectral range in the solid-state. Their ability to emit light under external voltage was examined. The devices with guest-host structure emitted light with the maximum located in the blue to red spectral range of the electroluminescence band (EL) depending on the content of the AzNI in the PVK:PBD matrix (guest-host structure).

Spectroscopic and Physicochemical Investigations of Azomethines with Triphenylamine Core towards Optoelectronics.

Three new azomethines based on triphenylamine with two or three substituents were obtained. Chemical structure and purity were confirmed by 1H NMR, FTIR elemental analysis and mass spectroscopy. The investigations were focused on the relationship between chemical structure and properties important for optoelectronic materials. Thus, the studies of thermal, optical and electrochemical properties were carried out based on differential scanning calorimetry, thermogravimetric analysis, electronic absorption, photoluminescence and cyclic voltammetry measurements. The ongoing consideration of experimental results was complemented by theoretical calculations using the density functional theory method. The donor activity of obtained compounds was tested in bulk-heterojuntion photovoltaic cells with structure ITO/PEDOT:PSS/imine:PCBM/Al and ITO/PEDOT:PSS/imine:P3HT:PCBM/Al). The effect of the presence of the amino-thiophene-3,4-dicarboxylic acid diethyl ester groups and various number of hexyloxyphenyl units on imines properties was demonstrated.

Synthesis and Characterization of New Conjugated Azomethines End-Capped with Amino-thiophene-3,4-dicarboxylic Acid Diethyl Ester.

A new series of thiophene-based azomethines differing in the core structure was synthesized. The effect of the central core structure in azomethines on the thermal, optical and electrochemical properties was investigated. The obtained compounds exhibited the ability to form a stable amorphous phase with a high glass transition temperature above 100 °C. They were electrochemically active and undergo oxidation and reduction processes. The highest occupied (HOMO) and the lowest unoccupied molecular (LUMO) orbitals were in the range of -3.86--3.60 eV and -5.46--5.17 eV, respectively, resulting in a very low energy band gap below 1.7 eV. Optical investigations were performed in the solvents with various polarity and in the solid state as a thin film deposited on a glass substrate. The synthesized imines absorbed radiation from 350 to 600 nm, depending on its structure and showed weak emission with a photoluminescence quantum yield below 2.5%. The photophysical investigations were supported by theoretical calculations using the density functional theory. The synthesized imines doped with lithium bis-(trifluoromethanesulfonyl)imide were examined as hole transporting materials (HTM) in hybrid inorganic-organic perovskite solar cells. It was found that both a volume of lithium salt and core imine structure significantly impact device performance. The best power conversion efficiency (PCE), being about 35-63% higher compared to other devices, exhibited cells based on the imine containing a core tiphenylamine unit.

Luminescence and Electrochemical Activity of New Unsymmetrical 3-Imino-1,8-naphthalimide Derivatives.

A new series of 1,8-naphtalimides containing an imine bond at the 3-position of the naphthalene ring was synthesized using 1H, 13C NMR, FTIR, and elementary analysis. The impact of the substituent in the imine linkage on the selected properties and bioimaging of the synthesized compounds was studied. They showed a melting temperature in the range of 120-164 °C and underwent thermal decomposition above 280 °C. Based on cyclic and differential pulse voltammetry, the electrochemical behavior of 1,8-naphtalimide derivatives was evaluated. The electrochemical reduction and oxidation processes were observed. The compounds were characterized by a low energy band gap (below 2.60 eV). Their photoluminescence activities were investigated in solution considering the solvent effect, in the aggregated and thin film, and a mixture of poly(N-vinylcarbazole) (PVK) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt.%). They demonstrated low emissions due to photoinduced electron transport (PET) occurring in the solution and aggregation, which caused photoluminescence quenching. Some of them exhibited light emission as thin films. They emitted light in the range of 495 to 535 nm, with photoluminescence quantum yield at 4%. Despite the significant overlapping of its absorption range with emission of the PVK:PBD, incomplete Förster energy transfer from the matrix to the luminophore was found. Moreover, its luminescence ability induced by external voltage was tested in the diode with guest-host configuration. The possibility of compound hydrolysis due to the presence of the imine bond was also discussed, which could be of importance in biological studies that evaluate 3-imino-1,8-naphatalimides as imaging tools and fluorescent materials for diagnostic applications and molecular bioimaging.

Synthesis and Thermal, Photophysical, Electrochemical Properties of 3,3-di[3-Arylcarbazol-9-ylmethyl]oxetane Derivatives.

Novel oxetane-functionalized derivatives were synthesized to find the impact of carbazole substituents, such as 1-naphtyl, 9-ethylcarbazole and 4-(diphenylamino)phenyl, on their thermal, photophysical and electrochemical properties. Additionally, to obtain the optimized ground-state geometry and distribution of the frontier molecular orbital energy levels, density functional theory (DFT) calculations were used. Thermal investigations showed that the obtained compounds are highly thermally stable up to 360 °C, as molecular glasses with glass transition temperatures in the range of 142-165 °C. UV-Vis and photoluminescence studies were performed in solvents of differing in polarity, in the solid state as a thin film on glass substrate, and in powders, and were supported by DFT calculations. They emitted radiation both in solution and in film with photoluminescence quantum yield from 4% to 87%. Cyclic voltammetry measurements revealed that the materials undergo an oxidation process. Next, the synthesized molecules were tested as hole transporting materials (HTM) in perovskite solar cells with the structure FTO/b-TiO2/m-TiO2/perovskite/HTM/Au, and photovoltaic parameters were compared with the reference device without the oxetane derivatives.

New Acceptor-Donor-Acceptor Systems Based on Bis-(Imino-1,8-Naphthalimide).

In this paper, six novel symmetrical bis-(imino-1,8-naphthalimides) differing in core and N-substituent structure were synthesized, and their thermal (TGA, DSC), optical (UV-Vis, PL), electrochemical (DPV, CV) properties were evaluated. The compounds were stable to 280 °C and could be transferred into amorphous materials. Electrochemical investigations showed their ability to occur reductions and oxidations processes. They exhibited deep LUMO levels of about -3.22 eV and HOMO levels above -5.80 eV. The optical investigations were carried out in the solutions (polar and non-polar) and in films and blends with PVK:PBD. Bis-(imino-1,8-naphthalimides) absorbed electromagnetic radiation in the range of 243-415 nm and emitted light from blue to yellow. Their capacity for light emission under voltage was preliminarily tested in devices with an active layer consisting of a neat compound and a blend with PVK:PBD. The diodes emitted green or red light.

Towards better understanding of photophysical properties of rhenium(I) tricarbonyl complexes with terpy-like ligands.

Series of Re(I) carbonyls complexes were designed and synthesized to explore the impact of the triimine skeleton and number of methoxy groups attached to aryl substituents on their optoelectronic and thermal properties. The chemical structures of the prepared complexes were confirmed by 1H and 13C NMR spectroscopy, HR-MS, elemental anlsysis, and X-ray measurements. DSC measuremtns showed that they melted in the range of 198-325 °C. Some of them form stable molecular glasses with high glass transition temperatures (158-173 °C). Experimentally obtained optical properties were supported by DFT calculations. The UV-Vis spectra display a series of overlapping absorption bands in the range 200-350 nm, and much weaker broad band in the visible spectral region, due to intraligand and charge transfer transitions, respectively. All synthesized complexes were emissive in solution and in solid state as powder. Moreover, when applied in diodes, some of them exhibited ability for emission of light under external voltage with maximum of electroluminescence band located at 591-630 nm.

Thermal, spectroscopic, electrochemical, and electroluminescent characterization of malononitrile derivatives with triphenylamine structure.

Three push-pull molecules with linear, quadrupolar and tripodal arrangements, consisting of triphenylamine (electro-donor) substituted with malononitrile groups (electro-acceptor), were synthesized with high yield by a simple procedure. Impact of the number of malononitrile substituents on optoelectronic properties was investigated with cyclic voltammetry, absorption and emission spectroscopy, as well as density functional theory calculation. The derivatives formed amorphous materials and exhibited low energy band gaps ranging from 2.06 to 2.49 eV. UV-Vis absorption and photoluminescence emission spectra were investigated in solutions (CHCl3, NMP) and in solid-state as thin films and two kinds of blends (with PMMA and PVK:PBD). Quantum yield of photoluminescence was dependent on the molecule structure, solvent, and solid-state layer formulation. The compounds exhibited high photoluminescence quantum yield in the range of 15-42% and 12-59% in solid-state as film and blend with PMMA (1 wt%), respectively, being promising for applications in light emitting diodes. The diodes with active layer consisting of neat derivatives and compounds molecularly dispersed in PVK:PBD (50:50 wt%) matrix showed orange and green electroluminescence.

NCN-Coordinating Ligands based on Pyrene Structure with Potential Application in Organic Electronics.

Five novel derivatives of pyrene, substituted at positions 1,3,6,8 with 4-(2,2-dimethylpropyloxy)pyridine (P1), 4-decyloxypyridine (P2), 4-pentylpyridine (P3), 1-decyl-1,2,3-triazole (P4), and 1-benzyl-1,2,3-triazole (P5), are obtained through a Suzuki-Miyaura cross-coupling reaction or CuI -catalyzed 1,3-dipolar cycloaddition reaction, respectively, and characterized thoroughly. TGA measurements reveal the high thermal stability of the compounds. Pyrene derivatives P1-P5 all show photoluminescence (PL) quantum yields (Φ) of approximately 75 % in solution. Solid-state photo- and electroluminescence characteristics of selected compounds as organic light-emitting diodes are tested. In the guest-host configuration, two matrixes, that is, poly(N-vinylcarbazole) (PVK) and a binary matrix consisting of PVK and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt %), are applied. The diodes show red, green, or blue electroluminescence, depending on both the compound chemical structure and the actual device architecture. In addition, theoretical studies (DFT and TD-DFT) provide a deeper understanding of the experimental results.

Synthesis, spectroscopic, electrochemical and computational studies of rhenium(i) tricarbonyl complexes based on bidentate-coordinated 2,6-di(thiazol-2-yl)pyridine derivatives.

Nine rhenium(i) complexes possessing three carbonyl groups together with a bidentate coordinated 2,6-di(thiazol-2-yl)pyridine derivative were synthesized to examine the impact of structure modification of the triimine ligand on the photophysical, thermal and electrochemical properties of [ReCl(CO)3(4-Rn-dtpy-κ2N)]. The Re(i) complexes were fully characterized using IR, 1H and 13C, HRMS-ESI and single crystal X-ray analysis. Their thermal properties were evaluated using DSC and TGA measurements. Photoluminescence spectra of [ReCl(CO)3(4-Rn-dtpy-κ2N)] were investigated in solution and in the solid state, at 298 and 77 K. Both emission wavelengths and quantum yields of [ReCl(CO)3(4-Rn-dtpy-κ2N)] were found to be structure-related, demonstrating a crucial role of the substituent attached to the 2,6-di(thiazol-2-yl)pyridine skeleton. In order to fully understand the photophysical properties of [ReCl(CO)3(4-Rn-dtpy-κ2N)], density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were performed. Furthermore, the complexes which showed appropriate solubility in chloroform were tested as an emissive active layer in OLED devices.

New anthracene-based Schiff bases: Theoretical and experimental investigations of photophysical and electrochemical properties.

The new Schiff bases bearing anthracene unit were synthesized from 2-aminoanthracene and various aldehydes such as: benzaldehyde, 4-(diphenylamino)benzaldehyde, 9-phenanthrenecarboxaldehyde, 9-anthracenecarboxaldehyde, and biphenyl-4-carboxaldehyde, 2-naphthaldehyde. Resulted azomethines were characterized by IR, NMR (1H and 13C), elemental analysis and UV-vis spectroscopy. The imine consists of anthracene and biphenyl moieties exhibited liquid crystal properties and their nematic phase showed Schlieren texture. The photoluminescence measurements carried out in solution and in solid state as blend with PMMA revealed the ability of the imines to emission of the blue light with quantum yield efficiency in the range of 2.18-6.03% in blend. Based on the electrochemical experiment they showed value of energy gap (Eg) in the range of 2.5-2.7eV. Additionally, density functional theory (DFT) was applied for calculations of both electronic structure and spectroscopic properties of synthesized Schiff bases. Moreover, the results obtained from preliminary tests of application of the azomethines in organic photovoltaic (OPV) devices confirmed their electron acceptor character.

Polycyclic aromatic hydrocarbons connected with Schiff base linkers: Experimental and theoretical photophysical characterization and electrochemical properties.

A series of polyaromatic hydrocarbons with anthracene, phenanthrene and pyrene units connected with Schiff base junctions were synthesized via condensation of p-phenylenediamine and hydrazine with selected aldehydes. The effect of both hydrocarbon structures and presence of N-N- or phenyl- linked diimines on properties of the prepared azines and azomethines was analyzed. The obtained compounds were soluble in common organic solvents and melted in the range of 226-317°C. Their photophysical and electrochemical properties were investigated by UV-vis, photoluminescence spectroscopies and cyclic voltammetry (CV), respectively. Moreover, a density functional theory (DFT) was applied for calculation of their electronic and geometric structures as well as absorption and emission spectra. Additionally, their electron acceptor activity was preliminary tested in photovoltaic experiment.