[Focal dermal hypoplasia associated with pathogenic PORCN gene variant in postzygotic, unilateral mosaic form]. / Fokale dermale Hypoplasie durch pathogene Variante im PORCN-Gen in postzygotischer, unilateraler Mosaik-Konstellation.

We report a case of a 29-year-old woman with subtle partial erythematous, partial hyperpigmented streaks along the Blaschko's lines on the right side of the body since early childhood. Primary DNA results of the skin and blood assay diagnosed focal dermal hypoplasia in mosaic form. The postzygotic mutation in the PORCN gene was only detectable in the affected skin and not in the blood assay. This article illustrates that clinically very discrete hypopigmentation and poikiloderma along Blaschko lines should raise awareness for robust diagnostic analysis in order to recognize this variable multisystem disease and to ensure an appropriate search for extracutaneous abnormalities and human genetic counseling, ideally before pregnancy. Careful correlation of clinical, histological, and genetic features along with close multidisciplinary cooperation of specialists from the fields of human genetics, dermatology, pediatrics, orthopedics and ophthalmology is crucial for final diagnosis, assessment of the prognosis and targeted genetic counseling of affected individuals.

A novel rice hull - microalgal biorefinery for the production of natural phenolic compounds comprising of rice hull acid pretreatment and a two-stage Botryococcus braunii cultivation process.

Recently, the rising demand of the industry for natural phenolic antioxidant compounds has turned to the study of microalgae as potential sources. Yet, more economic substrates for microalgal cultivation are sought to lower production costs. To this end, the present work deals with the utilization of rice hull hydrolysate (RHH) as substrate for microalgae Botryococcus braunii through a novel two-stage cultivation system. Initially, RHH was optimized to maximize the contained nutrients while minimizing its inhibitors content. The optimum point was reached under 121 °C, 60 min, 2% (v/v) H2SO4, 30% (w/v) loading. Next, B. braunii was successfully grown first heterotrophically in RHH (25%, v/v), obtaining high biomass production (6.67 g L-1) and then autotrophically to enhance phenolics accumulation. At the end, a high phenolic content of 7.44 ± 0.60 mg Gallic Acid Equivalents g-1 DW was achieved from the produced biomass, thus highlighting the potential of this novel biotechnological method.

Total Phenolic Content, Biomass Composition, and Antioxidant Activity of Selected Marine Microalgal Species with Potential as Aquaculture Feed.

There has been growing interest in microalgal biomolecules for health and cosmetics, as well as in the use of microalgae as aquaculture feed due to the need to replace fishmeal and fish oil with sustainable yet equally nutritious alternatives. Aim of this study is to evaluate the potential of five marine microalgal species, namely Chlorella minutissima, Dunaliella salina, Isochrysis galbana, Nannochloropsis oculata and Tisochrysis lutea, for the co-production of antioxidants and aquaculture feed. Batch cultivation was performed under saturating light intensity and continuous aeration. Freeze-dried biomass was extracted sequentially with water and methanol and evaluated for phenolic content and antioxidant activity, as well as proximate composition and fatty acid profile. Methanolic extracts of C. minutissima presented the highest phenolic content, measured with the Folin-Ciocalteu assay, and antioxidant activity. However, HPLC and LC-MS showed the presence of non-pigment compounds only in T. lutea. Total phenolic content and antioxidant activity were correlated to chlorophyll content. N. oculata and T. lutea were rich in eicosapentaenoic acid and docosahexaenoic acid, respectively, as well as in protein. In conclusion, N. oculata and T. lutea are suitable candidates for further optimization, while the data presented suggest that pigment effects on the Folin-Ciocalteu method require reconsideration.

Comparative Assessment of Nitrogen Concentration Effect on Microalgal Growth and Biochemical Characteristics of Two Chlorella Strains Cultivated in Digestate.

Microalgae have been recently recognized as a promising alternative for the effective treatment of anaerobic digestion effluents. However, to date, a widely applied microalgae-based process is still absent, due to several constraints mainly attributed to high ammonia concentrations and turbidity, both hindering microalgal growth. Within this scope, the purpose of the present study was to investigate the performance of two Chlorella strains, SAG 211-11b and a local Algerian isolate, under different nitrogen levels, upon ammonia stripping. The experiments were performed on cylindrical photobioreactors under controlled pH (7.8 ± 0.2) and temperature (25 ± 2 °C). Cultures were monitored for biomass production and substrate consumption. After sampling at the beginning of the stationary phase of growth (12th day) and after the maturation of the cells (24th day), an analysis of the produced biomass was conducted, in terms of its biochemical components. The local isolate grew better than C. vulgaris 211-11b, resulting in 1.43 mg L-1 biomass compared to 1.02 mg L-1 under 25 mg NH4-N L-1, while organic carbon and nutrient consumption varied between the two strains and different conditions. Concerning biomass quality, a high initial NH4-N concentration led to high protein content, while low nitrogen levels favored fatty acid (FA) accumulation, though the production of pigments was inhibited. In particular, the protein content of the final biomass was determined close to 45% of the dry weight in all experimental scenarios with adequate nitrogen, while proteins decreased, and the fatty acids approached 20% in the case of the local isolate grown on the substrate with the lowest initial ammonium nitrogen (25 mg NH4-N L-1). The novelty of the present work lies in the comparison of a microalga with industrial applications against a local isolate of the same species, which may prove to be even more robust and profitable.

Ultrasound-Assisted Extraction of Nannochloropsis oculata with Ethanol and Betaine: 1,2-Propanediol Eutectic Solvent for Antioxidant Pigment-Rich Extracts Retaining Nutritious the Residual Biomass.

The aim of this study was the development of an efficient "green" extraction method of Nannochloropsis oculata to produce antioxidant extracts and nutritious residual biomass. Twenty-one extraction methods were evaluated by measuring the reactivity with the Folin-Ciocalteu reagent: ultrasonication or maceration at different temperatures with different organic solvents, extraction at different pH values, enzyme-assisted extraction, encapsulation with ß-cyclodextrin, and the use of natural deep eutectic solvents. Ultrasound-assisted extraction with ethanol or betaine: 1,2-propanediol in a molar ratio of 2:5 (BP) had optimal extractive capacity. Both extracts were evaluated with antioxidant assays and the ethanol extract exhibited significantly higher (at least twofold) values. The determination of carotenoids by LC-MS and HPLC-DAD revealed the dominance of violaxanthin and antheraxanthin and their fourfold higher concentrations in the ethanol extract. The 1H-NMR characterization of the ethanol extract confirmed the results of the colorimetric and chromatographic assays. The microalgal biomass was characterized before and after the extraction in terms of humidity, ash, carbohydrates, proteins, chlorophyll-a, carotenoids, and lipids; the identity and content of the latter were determined with gas chromatography. BP caused a smaller depletion of the lipids from the biomass compared to ethanol, but proteins, carbohydrates, and ash were at a higher content in the biomass obtained after ethanol extraction, whereas the biomass was dry and easy to handle. Although further optimization may take place for the scale-up of those procedures, our study paves the way for a green strategy for the valorization of microalgae in cosmetics without generating waste, since the remaining biomass can be used for aquafeed.

Utilization of the microalga Scenedesmus quadricauda for hexavalent chromium bioremediation and biodiesel production.

The purpose of this study was to evaluate the bioremediation potential of the microalga Scenedesmus quadricauda in removing hexavalent chromium (Cr (VI)) from synthetic wastewater, under autotrophic and heterotrophic conditions and different inoculum concentrations. In both cultivation modes, the highest inoculum density of 0.8 g L-1 led to the highest Cr (VI) removal efficiency. In addition, Cr (VI) stress was more severe in 10 ppm compared to 5 ppm, while heavy metal effects were alleviated under heterotrophic conditions. Concurrently, Cr (VI) stress affected biomass quality, resulting in an increase in lipid and carbohydrate production and decreased proteins. Furthermore, under higher Cr (VI) concentration more saturated and monounsaturated fatty acids were produced, while monounsaturated fatty acids content was also greater under heterotrophic conditions. In total, the findings of this study highlight the advantages of heterotrophic cultivation of microalgae for concomitant industrial wastewater treatment and biofuel production.

Nanobiotechnological advancements in agriculture and food industry: Applications, nanotoxicity, and future perspectives.

The high demand for sufficient and safe food, and continuous damage of environment by conventional agriculture are major challenges facing the globe. The necessity of smart alternatives and more sustainable practices in food production is crucial to confront the steady increase in human population and careless depletion of global resources. Nanotechnology implementation in agriculture offers smart delivery systems of nutrients, pesticides, and genetic materials for enhanced soil fertility and protection, along with improved traits for better stress tolerance. Additionally, nano-based sensors are the ideal approach towards precision farming for monitoring all factors that impact on agricultural productivity. Furthermore, nanotechnology can play a significant role in post-harvest food processing and packaging to reduce food contamination and wastage. In this review, nanotechnology applications in the agriculture and food sector are reviewed. Implementations of nanotechnology in agriculture have included nano- remediation of wastewater for land irrigation, nanofertilizers, nanopesticides, and nanosensors, while the beneficial effects of nanomaterials (NMs) in promoting genetic traits, germination, and stress tolerance of plants are discussed. Furthermore, the article highlights the efficiency of nanoparticles (NPs) and nanozymes in food processing and packaging. To this end, the potential risks and impacts of NMs on soil, plants, and human tissues and organs are emphasized in order to unravel the complex bio-nano interactions. Finally, the strengths, weaknesses, opportunities, and threats of nanotechnology are evaluated and discussed to provide a broad and clear view of the nanotechnology potentials, as well as future directions for nano-based agri-food applications towards sustainability.

Construction of a novel microbial consortium valued for the effective degradation and detoxification of creosote-treated sawdust along with enhanced methane production.

Lignocellulosic biomass represents an unlimited and ubiquitous energy source, which can effectively address current global challenges, including climate change, greenhouse gas emissions, and increased energy demand. However, lignocellulose recalcitrance hinders microbial degradation, especially in case of contaminated materials such as creosote (CRO)-treated wood, which necessitates appropriate processing in order to eliminate pollution. This study might be the first to explore a novel bacterial consortium SST-4, for decomposing birchwood sawdust, capable of concurrently degrading lignocellulose and CRO compounds. Afterwards, SST-4 which stands for molecularly identified bacterial strains Acinetobacter calcoaceticus BSW-11, Shewanella putrefaciens BSW-18, Bacillus cereus BSW-23, and Novosphingobium taihuense BSW-25 was evaluated in terms of biological sawdust pre-treatment, resulting in effective lignocellulose degradation and 100% removal of phenol and naphthalene. Subsequently, the maximum biogas production observed was 18.7 L/kg VS, while cumulative methane production was 162.8 L/kg VS, compared to 88.5 without microbial pre-treatment. The cumulative energy production from AD-I and AD-II through biomethanation was calculated as 3177.1 and 5843.6 KJ/kg, respectively. The pretreatment process exhibited a significant increase in the energy yield by 83.9%. Lastly, effective CRO detoxification was achieved with EC50 values exceeding 90%, showing the potential for an integrated process of effective contaminated wood management and bioenergy production.

Plastic wastes biodegradation: Mechanisms, challenges and future prospects.

The growing accumulation of plastic wastes is one of the main environmental challenges currently faced by modern societies. These wastes are considered a serious global problem because of their effects on all forms of life. There is thus an urgent need to demonstrate effective eco-environmental techniques to overcome the hazardous environmental impacts of traditional disposal paths. However, our current knowledge on the prevailing mechanisms and the efficacy of synthetic plastics' biodegradation still appears limited. Under this scope, our review aims to comprehensively highlight the role of microbes, with special emphasis on algae, on the entire plastic biodegradation process focusing on the depolarization of various synthetic plastic types. Moreover, our review emphasizes on the ability of insects' gut microbial consortium to degrade synthetic plastic wastes. In this view, we discuss the schematic pathway of the biodegradation process of six types of synthetic plastics. These findings may contribute to establishing bio-upcycling processes of plastic wastes towards biosynthesis of valuable metabolic products. Finally, we discuss the challenges and opportunities for microbial valorization of degraded plastic wastes.

Coupling azo dye degradation and biodiesel production by manganese-dependent peroxidase producing oleaginous yeasts isolated from wood-feeding termite gut symbionts.

BACKGROUND: Textile industry represents one prevalent activity worldwide, generating large amounts of highly contaminated and rich in azo dyes wastewater, with severe effects on natural ecosystems and public health. However, an effective and environmentally friendly treatment method has not yet been implemented, while concurrently, the increasing demand of modern societies for adequate and sustainable energy supply still remains a global challenge. Under this scope, the purpose of the present study was to isolate promising species of yeasts inhabiting wood-feeding termite guts, for combined azo dyes and textile wastewater bioremediation, along with biodiesel production. RESULTS: Thirty-eight yeast strains were isolated, molecularly identified and subsequently tested for desired enzymatic activity, lipid accumulation, and tolerance to lignin-derived metabolites. The most promising species were then used for construction of a novel yeast consortium, which was further evaluated for azo dyes degradation, under various culture conditions, dye levels, as well as upon the addition of heavy metals, different carbon and nitrogen sources, and lastly agro-waste as an inexpensive and environmentally friendly substrate alternative. The novel yeast consortium, NYC-1, which was constructed included the manganese-dependent peroxidase producing oleaginous strains Meyerozyma caribbica, Meyerozyma guilliermondii, Debaryomyces hansenii, and Vanrija humicola, and showed efficient azo dyes decolorization, which was further enhanced depending on the incubation conditions. Furthermore, enzymatic activity, fatty acid profile and biodiesel properties were thoroughly investigated. Lastly, a dye degradation pathway coupled to biodiesel production was proposed, including the formation of phenol-based products, instead of toxic aromatic amines. CONCLUSION: In total, this study might be the first to explore the application of MnP and lipid-accumulating yeasts for coupling dye degradation and biodiesel production.

Degradation of conventional plastic wastes in the environment: A review on current status of knowledge and future perspectives of disposal.

Accumulation of plastic wastes has been recently recognized as one of the most critical environmental challenges, affecting all life forms, natural ecosystems and economy, worldwide. Under this threat, finding alternative environmentally-friendly solutions, such as biodegradation instead of traditional disposal, is of utmost importance. However, up to date, there is limited knowledge on plastic biodegradation mechanisms and efficiency. From this point of view, the purpose of this review is to highlight the negative effects of the accumulation of the most conventional plastic waste (polyethylene, polypropylene, polystyrene, polyvinylchloride, polyethylene terephthalate and polyurethane) on the environment and to present their degradability potential through abiotic and biotic processes. Furthermore, the ability of different microbial species for degradation of these polymers is thoroughly discussed. The present review also addresses the contribution of invertebrates, such as insects, in plastic degradation process, highlighting the vital role that they could play in the future. In total, a schematic pathway of an innovative approach to improve the disposal of plastic wastes is proposed, with view to establishing an effective and sustainable practice for plastic waste management.

Valorizing lignin-like dyes and textile dyeing wastewater by a newly constructed lipid-producing and lignin modifying oleaginous yeast consortium valued for biodiesel and bioremediation.

Construction of a multipurpose yeast consortium suitable for lipid production, textile dye/effluent removal and lignin valorization is critical for both biorefinery and bioremediation. Therefore, a novel oleaginous consortium, designated as OYC-Y.BC.SH has been developed using three yeast cultures viz. Yarrowia sp. SSA1642, Barnettozyma californica SSA1518 and Sterigmatomyces halophilus SSA1511. The OYC-Y.BC.SH was able to grow on different carbon sources and accumulate lipids, with its highest lipid productivity (1.56 g/L/day) and lipase activity (170.3 U/mL) exhibited in xylose. The total saturated fatty acid content was 36.09 %, while the mono-unsaturated and poly-unsaturated fatty acids were 45.44 and 18.30 %, respectively, making OYC-Y.BC.SH valuable for biodiesel production. The OYC-Y.BC.SH showed its highest decolorization efficiency of Red HE3B dye (above 82 %) in presence of sorghum husk as agricultural co-substrate, suggesting its feasibility for simultaneous lignin valorization. The significant higher performance of OYC-Y.BC.SH on decolorizing the real dyeing effluent sample at pH 8.0 suggests its potential and suitability for degrading most of the wastewater textile effluents. Clearly, toxicological studies underline the additional advantage of using OYC-Y.BC.SH for bioremediation of industrial dyeing effluents in terms of decolorization and detoxification. A possible mechanism of Red HE3B biodegradation and ATP synthesis was also proposed.

Is it always Wilms' tumor? Localized cystic disease of the kidney in an infant: An extremely rare case report and review of the literature.

Localized Cystic Disease of the Kidney (LCDK) is an extremely rare benign disease in pediatric population. Although its management is conservative and generally requires no treatment, the unfamiliarity with the disease can expose such patients to misdiagnosis as renal malignancies or uncertainty for proper treatment. We report such a case in an infant and review the current literature.

Polymeric Nanoparticles of Pistacia lentiscus var. chia Essential Oil for Cutaneous Applications.

Polymeric nanoparticles (NPs) encapsulating Pistacia lentiscus L. var. chia essential oil (EO) were prepared by a solvent evaporation method, in order to obtain a novel carrier for administration on the skin. The specific EO exhibits antimicrobial and anti-inflammatory properties thus stimulating considerable interest as a novel agent for the treatment of minor skin inflammations. The incorporation into nanoparticles could overcome the administration limitations that inserts the nature of the EO. Nanoparticles were prepared, utilizing poly(lactic acid) (PLA) as shell material, due to its biocompatibility and biodegradability, while the influence of surfactant type on NPs properties was examined. Two surfactants were selected, namely poly(vinyl alcohol) (PVA) and lecithin (LEC) and NPs' physicochemical characteristics i.e. size, polydispersity index (PdI) and ζ-potential were determined, not indicating significant differences (p > 0.05) between PLA/PVA-NPs (239.9 nm, 0.081, -29.1 mV) and PLA/LEC-NPs (286.1 nm, 0.167, -34.5 mV). However, encapsulation efficiency (%EE) measured by GC-MS, was clearly higher for PLA/PVA-NPs than PLA/LEC-NPs (37.45% vs. 9.15%, respectively). Moreover PLA/PVA-NPs remained stable over a period of 60 days. The in vitro release study indicated gradual release of the EO from PLA/PVA-NPs and more immediate from PLA/LEC-NPs. The above findings, in addition to the SEM images of the particles propose a potential structure of nanocapsules for PLA/PVA-NPs, where shell material is mainly consisted of PLA, enclosing the EO in the core. However, this does not seem to be the case for PLA/LEC-NPs, as the results indicated low EO content, rapid release and a considerable percentage of humidity detected by SEM. Furthermore, the Minimum Inhibitory Concentration (MIC) of the EO was determined against Escherichia coli and Bacillus subtilis, while NPs, however did not exhibit considerable activity in the concentration range applied. In conclusion, the surfactant selection may modify the release of EO incorporated in NPs for topical application allowing its action without interfering to the physiological skin microbiota.

Effect of organic carbon and nutrient supplementation on the digestate-grown microalga, Parachlorella kessleri.

Digested effluents are usually deprived of the appropriate levels of organic carbon or macro- and micro-nutrients to effectively sustain microalgal growth. In this regard, Parachlorella kessleri was cultivated in an agro-waste digestate supplemented with different glucose concentrations, magnesium and trace metals and alternatively with cheese whey (CW), with view to enriching digestate with organic and inorganic constituents and decreasing freshwater demand. Between the conditions tested, CW addition resulted in the highest biomass concentration, 2.68 g L-1 within 18 days of cultivation. Chlorophyll content significantly decreased under 5 g L-1 glucose addition, in contrast to MgSO4 co-addition and CW supplementation. The latter also induced high photosynthetic activity and better-preserved vitality of the photosynthetic apparatus, compared to sole glucose addition. Concerning lipid accumulation, in the presence of high glucose concentration, % of total fatty acids decreased, and the saturated fraction increased over polyunsaturated fatty acids (PUFAs).

Sequential cultivation of microalgae in raw and recycled dairy wastewater: Microalgal growth, wastewater treatment and biochemical composition.

In this study, two cycles of mixotrophic and one cycle of heterotrophic cultivation of Scenedesmus quadricauda (freshwater) and Tetraselmis suecica (marine water) microalgae in dairy wastewater (DWW) were investigated. Dry weights of S. quadricauda and T. suecica were found to be 0.43 and 0.58 g/L after the first cycle and 0.36, and 0.65 g/L after the second cycle of mixotrophic cultivation, respectively. Chlorophyll a content of both microalgae in the first cycle was significantly higher than the second cycle. S. quadricauda removed 92.15% of total nitrogen, 100% of phosphate, 100% of sulfate and 76.77% of total organic carbon, after two cycles of cultivation. The dominant fatty acids during the first and second cycle of S. quadricauda and T. suecica cultivation were C18:1 and C18:3n-3, respectively. The results suggest that by reusing DWW in two consecutive cycles of microalgal cultivation, higher pollutants removal efficiency and microalgal biomass production can be achieved.

Bio-Based Products from Microalgae Cultivated in Digestates.

In recent years the increasing demand for food, energy, and valuable chemicals has necessitated research and development on renewable, novel, and sustainable sources. Microalgae represent a promising option to produce various products with environmentally friendly applications. However, several challenges must be overcome to reduce production cost. To this end, using effluents from biogas production units, called digestates, in cultivation systems can help to optimize bioprocesses, and several bioproducts including biofuels, biofertilizers, proteins and valuable chemicals can be obtained. Nevertheless, several parameters, including the productivity and quality of biomass and specific target products, downstream processes, and cost-effectiveness, must be improved. Further investigations will be necessary to take full advantage of the produced biomass and effectively upscale the process.

Investigation on the feasibility of Chlorella vulgaris cultivation in a mixture of pulp and aquaculture effluents: Treatment of wastewater and lipid extraction.

In this study, feasibility of Chlorella vulgaris cultivation in pulp wastewater (PWW) diluted with lake water (LW) and aquaculture wastewater (AWW) was investigated. The best ratios of PWW and AWW (PAWW) viz., 80% PWW:20% AWW and 60% PWW:40% AWW were selected as microalgal culture medium. Algal growth was investigated with and without addition of macro and micronutrients to the cultivation medium. The highest dry algal weight was observed as 1.31 g/L in 60% PWW:40% AWW without adding micronutrients. Nutrients and organic compounds removal efficiencies by microalga were studied in PAWW. Protein, carbohydrate and lipid percentage of harvested microalga from wastewater and Bold's Basal Medium (BBM) solution were analyzed. Fatty acids analysis revealed that C16 and C18 are the major fatty acids in C. vulgaris cultivated in BBM and PAWW. The results of this study revealed that C. vulgaris is a potential candidate for PAWW treatment and lipid and carbohydrate accumulation.