Fabrication and Characterization of Thin Metal Films Deposited by Electroless Plating with Organic Additives for Electrical Circuits Applications.

In our work, we studied thin nickel films deposited by electroless plating for use as a barrier and seed layer in the through-silicon vias (TSV) technology. El-Ni coatings were deposited on a copper substrate from the original electrolyte and with the use of various concentrations of organic additives in the composition of the electrolyte. The surface morphology, crystal state, and phase composition of the deposited coatings were studied by SEM, AFM, and XRD methods. The El-Ni coating deposited without the use of an organic additive has an irregular topography with rare phenocrysts of globular formations of hemispherical shape and a root mean square roughness value of 13.62 nm. The phosphorus concentration in the coating is 9.78 wt.%. According to the results of the X-ray diffraction studies of El-Ni, the coating deposited without the use of an organic additive has a nanocrystalline structure with an average nickel crystallite size of 2.76 nm. The influence of the organic additive is seen in the smoothening of the samples surface. The root mean square roughness values of the El-Ni sample coatings vary within 2.09-2.70 nm. According to microanalysis data the phosphorus concentration in the developed coatings is ~4.7-6.2 wt.%. The study of the crystalline state of the deposited coatings by X-ray diffraction made it possible to detect two arrays of nanocrystallites in their structure, with average sizes of 4.8-10.3 nm and 1.3-2.6 nm.

Phase Transformation during the Selective Dissolution of a Cu85Pd15 Alloy: Nucleation Kinetics and Contribution to Electrocatalytic Activity.

This study determined the critical parameters for the morphological development of the electrode surface (the critical potential and the critical charge) during anodic selective dissolution of a Cu-Pd alloy with a volume concentration of 15 at.% palladium. When the critical values were exceeded, a phase transition occurred with the formation of palladium's own phase. Chronoamperometry aided in the determination of the partial rates of copper ionization and phase transformation of palladium under overcritical selective dissolution conditions. The study determined that the formation of a new palladium phase is controlled by a surface diffusion of the ad-atom to the growing three-dimensional nucleus under instantaneous activation of the nucleation centres. We also identified the role of this process in the formation of the electrocatalytic activity of the anodically modified alloy during electro-oxidation of formic acid. This study demonstrated that HCOOH is only oxidated at a relatively high rate on the surface of the Cu85Pd15 alloy, which is subjected to selective dissolution under overcritical conditions. This can be explained by the fact that during selective dissolution of the alloy, a pure palladium phase is formed on its highly developed surface which has prominent catalytic activity towards the electro-oxidation of formic acid. The rate of electro-oxidation of HCOOH on the surface of the anodically modified alloy increased with the growth of the potential and the charge of selective dissolution, which can be used to obtain an electrode palladium electrocatalyst with a set level of electrocatalytic activity towards the anodic oxidation of formic acid.

Electromass Transfer in the System "Cation Exchange Membrane-Ammonium Nitrate Solution".

The paper describes an experimental study and the mathematical simulation of the electromembrane transfer of cations of weak electrolytes (namely, ammonium ions), hindered by hydrolysis reactions taking place in the surface layers of the cation exchange membrane. Using the finite element method, we found a solution to the corresponding diffusion-kinetic electrodialysis problem in potentiostatic mode. Based on the experimental data and the results of theoretical simulation, we analyzed the effect of hydrolysis on the concentration polarization of the electromembrane system and the transport characteristics of ions, and suggested a mechanism of transfer of the components of the ammonium nitrate solution through the cation exchange membrane.

Approaches for Modifying Oxide-Semiconductor Materials to Increase the Efficiency of Photocatalytic Water Splitting.

The constant increase in the amount of energy consumed and environmental problems associated with the use of fossil fuels determine the relevance of the search for alternative and renewable energy sources. One of these is hydrogen gas, which can be produced by sunlight-driven photocatalytic water splitting. The decisive role in the efficiency of the process is played by the properties of the photocatalyst. Oxide materials are widely used as photocatalysts due to their appropriate band structure, high-enough photochemical stability and corrosion resistance. However, the bandgap, crystallinity and the surface morphology of oxide materials are subject to improvement. Apart from the properties of the photocatalyst, the parameters of the process influence the hydrogen-production efficiency. This paper outlines the key ways to improve the characteristics of oxide-semiconductor photocatalysts with the optimum parameters of photocatalytic water splitting.

Analysis of the spectral-luminescence properties of imidazo[1,2-b]pyrido[4,3-e][1,2,4]triazin-6(7Н)-ones.

The article presents a method for the construction of a new tricyclic system of imidazo[1,2-b]pyrido[4,3-e][1,2,4]triazin-6(7Н)-ones based on subsequent reactions of the obtained 1,2-diamino-4-phenylimidazole ethyl ether of 3-methyl-6-phenylimidazo[1,2-b][1,2,4]triazin-2-carboxylic acid with dimethylformamide dimethyl acetal and primary amines. The structures of the obtained compounds were confirmed using the data obtained from 1 Н and 13 С NMR, HRMS, and XRD analyses. We analyzed the dependence of the absorption and photoluminescence spectra on the structure of the compounds obtained using quantum chemistry methods. The theoretical results were compared with the data from a real experiment. The article suggests a range of practical applications for imidazo[1,2-b]pyrido[4,3-e][1,2,4]triazin-6(7Н)-ones.

Progress in Sensors for Monitoring Reinforcement Corrosion in Reinforced Concrete Structures-A Review.

Non-destructive monitoring methods and continuous monitoring systems based on them are crucial elements of modern systems for the management and maintenance of assets which include reinforced concrete structures. The purpose of our study was to summarise the data on the most common sensors and systems for the non-destructive monitoring of reinforced concrete structures developed over the past 20 years. We considered systems based on electrochemical (potentiometry, methods related to polarisation) and physical (electromagnetic and ultrasonic waves, piezoelectric effect, thermography) examination methods. Special focus is devoted to the existing sensors and the results obtained using these sensors, as well as the advantages and disadvantages of their setups or other equipment used. The review considers earlier approaches and available commercial products, as well as relatively new sensors which are currently being tested.