Antimicrobial Peptide Assembly on Zwitterionic Polymer Films to Slow Down Biofilm Formation.

Formation of biofilms on equipment used in various fields, such as medicine, domestic sanitation, and marine transportation, can cause serious problems. The use of antibiofouling and bactericidal modifications is a promising strategy for inhibiting bacterial adhesion and biofilm formation. To further enhance the antibiofilm properties of a surface, various combinations of bactericidal modifications alongside antibiofouling modifications have been developed. Optimization of the arrangements of antimicrobial peptides on the antibiofouling surface would allow us to design longer-life antibiofilm surface modifications. In this study, a postmodification was conducted with different design using the antimicrobial peptide KR12 on an antibiofouling copolymer film consisting of 2-methacryloyloxyethyl phosphorylcholine, 3-methacryloxypropyl trimethoxysilane, and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane. The distance of KR12 from the film was adjusted by combining different lengths of poly(ethylene glycol) (PEG) spacers (molecular weights are 2000 and 5000). The density of KR12 was ranged from 0.06 to 0.22 nm-2. When these modified surfaces were exposed to a nutrient-rich TSB suspension, the bacterial area formed by E. coli covered 5-127% of the original copolymer film. We found that a significant distance between the bactericidal and antibiofouling modifications, along with a higher density of bactericidal modifications, slows down the biofilm formation.

Superior antibacterial surfaces using hydrophilic, poly(MPC) and poly(mOEGMA) free chains of amphiphilic block copolymer for sustainable use.

Surface modification of electrically neutral hydrophilic polymers is one of the most promising methods for preventing biofouling and biological contamination by proteins and bacteria. Surface modification of inorganic materials such as silica-based glass can render them more durable and thus help in achieving the sustainable development goals. This study reports a novel method for the simple and effective surface modification of glass surfaces with amphiphilic block copolymers possessing the silane coupling segment composed of 3-(methacryloyloxy)propyltris (trimethylsilyloxy) silane and 3-methacryloxypropyltrimethoxysilane. The ability of hydrophilic segments composed of either 2-methacryloyloxyethyl phosphorylcholine (MPC) or poly(ethylene glycol) methyl ether methacrylate (mOEGMA) to prevent bacterial adhesion was investigated. The target block copolymers were prepared by reversible addition-fragmentation chain transfer polymerization and the monomer units of the hydrophilic segments were controlled to be either 120 or 160. The polymers were modified on the substrate by dip-coating. Contact angle measurements indicated that the block copolymer with the PMPC hydrophilic segment formed a hydrophilic surface without pre-hydration, while those with the PmOEGMA hydrophilic segment-coated surface became hydrophilic upon immersion in water. The block copolymer-coated surfaces decreased S. aureus adhesion, and a significant reduction was observed with the MPC-type block copolymer. The following surface design guidelines were thus concluded: (1) the block copolymer is superior to the random copolymer and (2) increasing the hydrophilic segment length further decreases bacterial adhesion.

Bactericidal Ability of Well-Controlled Cationic Polymer Brush Surfaces and the Interaction Analysis by Quartz Crystal Microbalance with Dissipation.

In this study, cationic poly(2-(methacryloyloxy)ethyl) trimethylammonium chloride) (PMTAC) brush surfaces were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP), and their properties were systematically investigated to discuss the factors affecting their bactericidal properties and interactions with proteins. Model equations for the analysis of electrophoretic behaviors were considered for accurate parameter estimation to indicate the charge density at the interface. The zeta potential dependency of the PMTAC brushes was successfully analyzed using Smolchowski's equation and the Gouy-Chapman model, which describes the diffusive electric double layer. The analysis of the quartz crystal microbalance with dissipation (QCM-D) indicated that the electrostatic interaction promoted protein adsorption, with a large quantity of a negatively charged protein, bovine serum albumin (BSA), being adsorbed. The bactericidal efficiency of the high-graft-density polymer brush (0.45 chains nm-2) was higher than that of the low-graft-density polymer brush (0.06 chains nm-2). To investigate the mechanism of this phenomenon, we applied the dissipation change (ΔD) of QCM-D analysis. The BSA was likewise adsorbed when the brush structure was changed; however, the negative ΔD indicated that the BSA-adsorbed, high-graft-density PMTAC brush became a rigid state. In the bacteria culture media, the behaviors were the same as BSA adsorption, and the high-graft-density polymer brush was also estimated to be more rigid than the low-graft-density polymer brush. Moreover, for S. aureus adhesion after incubating in TSB, a small slope of ΔD/ΔF plots considered initial adsorption of bacteria on the high-graft-density polymer brush strongly interacted compared to that of the low-graft-density polymer brush. The scattered value of the slope of ΔD/ΔF on the high-graft-density polymer brush was considered to be due to the dead bacteria between the bacteria and the polymer brush interface. These investigations for a well-defined cationic polymer brush will contribute to the design of antibacterial surfaces.

Evaluation of bacterial adhesion strength on phospholipid copolymer films with antibacterial ability using microfluidic shear devices.

Biomimetic phospholipid copolymer films are known to possess antifouling properties against protein adsorption and biofilm formation. However, the interactions between bacterial cells and material surfaces are not fully understood. This work investigated the bacterial adhesion strength of phospholipid copolymer films using a shear stress-tunable microfluidic device. The copolymer, comprising 2-methacryloyloxyethyl phosphorylcholine (MPC), 3-methacryloxypropyl trimethoxysilane (MPTMSi), and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane (MPTSSi), formed crosslinked films on glass substrates; the thickness of the coating film was controlled by the polymer concentration during dip-coating. Polymer films with two typical thicknesses, 20 and 40 nm (denoted as C-20 and C-40, respectively), were prepared on the bottom wall of the microfluidic device. After seeding S. aureus in the microfluidic device, several shear stresses were applied to evaluate the adhesion strength of the polymer films. S. aureus was found to have weaker adhesion strength on the C-40 surface than on the C-20 surface; numerous bacterial cells detached from the C-40 surface on application of identical shear stress. To mimic the presence of plasma protein, fibrinogen (Fg) was introduced into the device before performing the bacterial adhesion assay. The results showed that the adsorption of Fg promoted S. aureus adhesion and strong interactions under shear stress. However, the adhesion strength of S. aureus did not affect the Fg adsorption for both the C-20 and C-40 surfaces. Using the shear stress-tunable microfluidic device, we found that the adhesion of S. aureus on the thicker and softer phospholipid copolymer was weak, and the cells easily detached under high shear stress.