Environmental impacts of corn silage production: influence of wheat residues under contrasting tillage management types.

The intensification of specific land management operations (tillage, herbicide, etc.) is increasing land degradation and contributing to ecosystem pollution. Mulches can be a sustainable tool to counter these processes. This is particularly relevant for rural areas in low-income countries where agriculture is a vital sector. In this research, the environmental impact of different rates of wheat residues (no residues, 25, 50, 75, and 100%) in corn silage cultivation was evaluated using the life cycle assessment (LCA) method under conventional tillage (CT) and no-tillage (NT) systems in a semi-arid region in Karaj, Iran. Results showed that in both tillage systems, marine aquatic ecotoxicity (ME) and global warming potential (GWP) had the highest levels of pollution among the environmental impact indicators. In CT systems, the minimum (17,730.70 kg 1,4-dichlorobenzene (DB) eq.) and maximum (33,683.97 kg 1,4-DB eq.) amounts of ME were related to 0 and 100% wheat residue rates, respectively. Also, in the CT system, 0 and 100% wheat residue rates resulted in minimum (176.72 kg CO2 eq.) and maximum (324.95 kg CO2 eq.) amounts of GWP, respectively. However, in the NT system, the 100% wheat residue rate showed the minimum amounts of ME (11,442.39 kg 1,4-DB eq.) and GWP (120.21 kg CO2 eq.). Also, in the NT system, maximum amounts of ME (17,174 kg 1,4-DB eq.) and GWP (175.60 kg CO2 eq.) were observed with a zero wheat residue rate. On-farm emissions and nitrogen fertilizers were the two factors with the highest contribution to the degradation related to environmental parameters at all rates of wheat residues. Moreover, in the CT system, the number of environmental pollutants increased with the addition of a higher wheat residue rate, while in the NT system, increasing residue rates decreased the amount of environmental pollutants. In conclusion, this LCA demonstrates that the NT system with the full retention of wheat residues (100%) is a more environmentally sustainable practice for corn silage production. Therefore, it may be considered one of the most adequate management strategies in this region and similar semi-arid conditions. Further long-term research and considering more environmental impact categories are required to assess the real potential of crop residues and tillage management for sustainable corn silage production.

Environmental life cycle assessment of nano-cellulose and biogas production from manure.

Due to its unique properties, nano fibrillated cellulose (NFC) has been a popular topic of research in recent years. Nevertheless, literature assessing environmental impacts of NFC production is scarce, especially for using other starting materials than wood pulp. Hence, in this study, a new approach of cascaded use of manure to produce biogas and subsequently use the cellulose containing digestate for NFC production (manure scenario) is compared to the production from Kraft pulp from hardwood chips (wood chips scenario) via life cycle assessment (LCA). To produce comparable outputs (NFC and biogas) in both scenarios a typical Austrian biogas plant with maize silage and pig slurry as input material is included in the wood chips scenario. A proxy approach is used to upscale the manure scenario from laboratory to an industrial scale (except for the pulp to NFC step) to ensure comparability of both scenarios. The impact categories global warming potential (GWP), fossil resource scarcity, freshwater eutrophication, human toxicity, terrestrial acidification (TAP) and terrestrial ecotoxicity potential are analysed referring to the functional unit of 1 kg NFC. Results show that the manure scenario has at least 45% lower impacts in all assessed categories. GWP is 4.41 kg CO2 eq./kg NFC in the manure and 9.74 kg CO2 eq./kg NFC in the wood chips scenario. The transformation step from pulp to NFC is identified as environmental hotspot due to the high electricity demand in both scenarios. Results are additionally assessed only for the industrial scale part (includes biogas and pulp production). In the latter the main difference can be found in the substrate production. While it plays a subordinate role in the manure scenario (up to 8%) as manure is seen as a waste stream with no upstream environmental impacts attached, the production of maize silage is one of the hotspots in the industrial part in the wood chips scenario. This difference is especially prominent in TAP, where the substrate production is responsible for 91% of the 0.06 kg SO2 eq. impact, which is tenfold the impact of the manure scenario. This underlines the issue of using energy crops as substrate in biogas plants. It also highlights the importance of further research of using waste streams as inputs for the electricity production and subsequent use in the pulp and paper industry. This LCA demonstrates that NFC production from manure is a sustainable alternative to the production from hardwood Kraft pulp.

Corn stover for biogas production: Effect of steam explosion pretreatment on the gas yields and on the biodegradation kinetics of the primary structural compounds.

This study evaluated the effect of steam explosion on the chemical composition and biomethane potential of corn stover using temperatures ranging between 140 and 220°C and pretreatment times ranging between 2 and 15min. Biodegradation kinetics during the anaerobic digestion of untreated and corn stover, pretreated at two different intensities, 140°C for 5min and 180°C for 5min, were studied in tandem. Results showed that pretreatment at 160°C for 2min improved the methane yield by 22%. Harsher pretreatment conditions led to lower hemicellulose contents and methane yields, as well as higher lignin contents, which may be due to the formation of pseudo-lignin. The biodegradation kinetics trial demonstrated that steam explosion enhances the degradation of structural carbohydrates and acid insoluble lignin.