Excitonic Effects in Energy-Loss Spectra of Freestanding Graphene.

In this work, we perform electron energy-loss spectroscopy (EELS) of freestanding graphene with high energy and momentum resolution to disentangle the quasielastic scattering from the excitation gap of Dirac electrons close to the optical limit. We show the importance of many-body effects on electronic excitations at finite transferred momentum by comparing measured EELS to ab initio calculations at increasing levels of theory. Quasi-particle corrections and excitonic effects are addressed within the GW approximation and the Bethe-Salpeter equation, respectively. Both effects are essential in the description of the EEL spectra to obtain a quantitative agreement with experiments, with the position, dispersion, and shape of both the excitation gap and the π plasmon being significantly affected by excitonic effects.

Progress in Carbon Nanostructures: From Synthesis to Applications.

Significant progress in carbon nanostructures has been achieved in the past 20 years; however, there is plenty of room for further study [...].

Cytotoxicity of Carbon Nanotubes, Graphene, Fullerenes, and Dots.

The cytotoxicity of carbon nanomaterials is a very important issue for microorganisms, animals, and humans. Here, we discuss the issues of cytotoxicity of carbon nanomaterials, carbon nanotubes, graphene, fullerene, and dots. Cytotoxicity issues, such as cell viability and drug release, are considered. The main part of the review is dedicated to important cell viability issues. They are presented for A549 human melanoma, E. coli, osteosarcoma, U2-OS, SAOS-2, MG63, U87, and U118 cell lines. Then, important drug release issues are discussed. Bioimaging results are shown here to illustrate the use of carbon derivatives as markers in any type of imaging used in vivo/in vitro. Finally, perspectives of the field are presented. The important issue is single-cell viability. It can allow a correlation of the functionality of organelles of single cells with the development of cancer. Such organelles are mitochondria, nuclei, vacuoles, and reticulum. It allows for finding biochemical evidence of cancer prevention in single cells. The development of investigation methods for single-cell level detection of viability stimulates the cytotoxicity investigative field. The development of single-cell microscopy is needed to improve the resolution and accuracy of investigations. The importance of cytotoxicity is drug release. It is important to control the amount of drug that is released. This is performed with pH, temperature, and electric stimulation. Further development of drug loading and bioimaging is important to decrease the cytotoxicity of carbon nanomaterials. We hope that this review is useful for researchers from all disciplines across the world.

Advanced Carbon Nanostructures: Synthesis, Properties, and Applications.

Carbon nanomaterials are a class of materials that include allotropic modifications of carbon [...].

Electrochemistry of Carbon Materials: Progress in Raman Spectroscopy, Optical Absorption Spectroscopy, and Applications.

This paper is dedicated to the discussion of applications of carbon material in electrochemistry. The paper starts with a general discussion on electrochemical doping. Then, investigations by spectroelectrochemistry are discussed. The Raman spectroscopy experiments in different electrolyte solutions are considered. This includes aqueous solutions and acetonitrile and ionic fluids. The investigation of carbon nanotubes on different substrates is considered. The optical absorption experiments in different electrolyte solutions and substrate materials are discussed. The chemical functionalization of carbon nanotubes is considered. Finally, the application of carbon materials and chemically functionalized carbon nanotubes in batteries, supercapacitors, sensors, and nanoelectronic devices is presented.

Metallocene-Filled Single-Walled Carbon Nanotube Hybrids.

In this paper, the growth mechanism, structure, growth processes, growth kinetics, and optical, vibronic and electronic properties of metallocene-filled single-walled carbon nanotubes (SWCNTs) are considered. A description of the procedures used to fill the nanotubes is provided. An investigation of doping effects on metallicity-mixed SWCNTs filled with metallocenes by Raman spectroscopy, near edge X-ray absorption fine structure spectroscopy, photoemission spectroscopy, and optical absorption spectroscopy is described. The studies of doping effects on metallicity-sorted SWCNTs filled with metallocenes are discussed. Doping effects in metallicity-mixed and sorted SWCNTs upon the chemical transformation of encapsulated molecules are analyzed. A discussion of the modification of the electronic properties of filled SWCNTs is presented. Applications of metallocene-filled SWCNTs in electrochemistry, thermoelectric power generation, chemical sensors, and magnetic recording are discussed.

Functionalized Fullerenes and Their Applications in Electrochemistry, Solar Cells, and Nanoelectronics.

Carbon-based nanomaterials have rapidly advanced over the last few decades. Fullerenes, carbon nanotubes, graphene and its derivatives, graphene oxide, nanodiamonds, and carbon-based quantum dots have been developed and intensively studied. Among them, fullerenes have attracted increasing research attention due to their unique chemical and physical properties, which have great potential in a wide range of applications. In this article, we offer a comprehensive review of recent progress in the synthesis and the chemical and physical properties of fullerenes and related composites. The review begins with the introduction of various methods for the synthesis of functionalized fullerenes. A discussion then follows on their chemical and physical properties. Thereafter, various intriguing applications, such as using carbon nanotubes as nanoreactors for fullerene chemical reactions, are highlighted. Finally, this review concludes with a summary of future research, major challenges to be met, and possible solutions.

Phemenology of Filling, Investigation of Growth Kinetics and Electronic Properties for Applications of Filled Single-Walled Carbon Nanotubes.

This review discusses the phemenology of filling, the investigation of kinetics, and the electronic properties for applications of filled single-walled carbon nanotubes (SWCNTs), and summarizes five main achievements that were obtained in processing the spectroscopic data of SWCNTs filled with metal halogenide, metal chalcogenide, metal and metallocenes. First, the methods of processing kinetic data were developed to reveal precise trends in growth rates and activation energies of the growth of SWCNTs. Second, the metal-dependence of kinetics was revealed. Third, metallicity-sorted (metallic and semiconducting) SWCNTs were filled with a range of substances and the electronic properties were investigated. Fourth, new approaches to processing the data of spectroscopic investigations of filled SWCNTs were developed, which allowed more reliable and precise analysis of the experimental results. Fifth, the correlation between the physical and chemical properties of encapsulated substances and the electronic properties of SWCNTs were elucidated. These points are highlighted in the review.

Synthesis, Sorting, and Applications of Single-Chirality Single-Walled Carbon Nanotubes.

The synthesis of high-quality chirality-pure single-walled carbon nanotubes (SWCNTs) is vital for their applications. It is of high importance to modernize the synthesis processes to decrease the synthesis temperature and improve the quality and yield of SWCNTs. This review is dedicated to the chirality-selective synthesis, sorting of SWCNTs, and applications of chirality-pure SWCNTs. The review begins with a description of growth mechanisms of carbon nanotubes. Then, we discuss the synthesis methods of semiconducting and metallic conductivity-type and single-chirality SWCNTs, such as the epitaxial growth method of SWCNT ("cloning") using nanocarbon seeds, the growth method using nanocarbon segments obtained by organic synthesis, and the catalyst-mediated chemical vapor deposition synthesis. Then, we discuss the separation methods of SWCNTs by conductivity type, such as electrophoresis (dielectrophoresis), density gradient ultracentrifugation (DGC), low-speed DGC, ultrahigh DGC, chromatography, two-phase separation, selective solubilization, and selective reaction methods and techniques for single-chirality separation of SWCNTs, including density gradient centrifugation, two-phase separation, and chromatography methods. Finally, the applications of separated SWCNTs, such as field-effect transistors (FETs), sensors, light emitters and photodetectors, transparent electrodes, photovoltaics (solar cells), batteries, bioimaging, and other applications, are presented.

Metal and Metal Halogenide-Filled Single-Walled Carbon Nanotubes: Kinetics, Electronic Properties, Engineering the Fermi Level.

Here, we present a review of the major achievements in kinetics, electronic properties, and engineering in the Fermi level of single-walled carbon nanotubes (SWCNTs). Firstly, the kinetics of metal-filled SWCNTs were revealed with precision over several minutes. Secondly, the growth rates of nanotubes were calculated. Thirdly, the activation energies of nanotubes were measured. Fourthly, the methods of the quantitative analysis of the doping level were developed. Indeed, only qualitative analysis has been previously performed. The quantitative analysis allowed us to obtain quantitative data on charge transfer. Fifthly, the correlation between the physical properties, chemical properties, electronic properties of SWCNTs was elucidated.

Applications of Filled Single-Walled Carbon Nanotubes: Progress, Challenges, and Perspectives.

Single-walled carbon nanotubes (SWCNTs), which possess electrical and thermal conductivity, mechanical strength, and flexibility, and are ultra-light weight, are an outstanding material for applications in nanoelectronics, photovoltaics, thermoelectric power generation, light emission, electrochemical energy storage, catalysis, sensors, spintronics, magnetic recording, and biomedicine. Applications of SWCNTs require nanotube samples with precisely controlled and customized electronic properties. The filling of SWCNTs is a promising approach in the fine-tuning of their electronic properties because a large variety of substances with appropriate physical and chemical properties can be introduced inside SWCNTs. The encapsulation of electron donor or acceptor substances inside SWCNTs opens the way for the Fermi-level engineering of SWCNTs for specific applications. This paper reviews the recent progress in applications of filled SWCNTs and highlights challenges that exist in the field.

Temperature-Dependent Growth of 36 Inner Nanotubes inside Nickelocene, Cobaltocene and Ferrocene-Filled Single-Walled Carbon Nanotubes.

We have investigated the effects of temperature, diameter and metal catalyst type on the growth of inner nanotubes inside metallocene-filled single-walled carbon nanotubes (SWCNTs). The effects on the yield of different chiralities of inner nanotubes were scrutinized by multifrequency Raman spectroscopy. The investigated diameters range from ~0.7 to 1.3 nm and comprise 36 distinct chiralities. For all three investigated metals (Ni, Co, Fe), there is a linear correlation of growth temperature with nanotube diameter. The common slope for these metals is found to be 40.5 °C/Å. The temperature difference between the largest and the smallest diameter tubes amounts to ~230 °C for all three precursors. The growth temperatures are offset by 34 °C from Ni to Co and another 28 °C from Co to Fe. The quantified correlations of temperature, diameter and metal catalyst type provide the basis for engineering the diameter-specific growth of nanotubes.

Applications of Pristine and Functionalized Carbon Nanotubes, Graphene, and Graphene Nanoribbons in Biomedicine.

This review is dedicated to a comprehensive description of the latest achievements in the chemical functionalization routes and applications of carbon nanomaterials (CNMs), such as carbon nanotubes, graphene, and graphene nanoribbons. The review starts from the description of noncovalent and covalent exohedral modification approaches, as well as an endohedral functionalization method. After that, the methods to improve the functionalities of CNMs are highlighted. These methods include the functionalization for improving the hydrophilicity, biocompatibility, blood circulation time and tumor accumulation, and the cellular uptake and selectivity. The main part of this review includes the description of the applications of functionalized CNMs in bioimaging, drug delivery, and biosensors. Then, the toxicity studies of CNMs are highlighted. Finally, the further directions of the development of the field are presented.

Metal Cluster Size-Dependent Activation Energies of Growth of Single-Chirality Single-Walled Carbon Nanotubes inside Metallocene-Filled Single-Walled Carbon Nanotubes.

By combining in situ annealing and Raman spectroscopy measurements, the growth dynamics of nine individual-chirality inner tubes (8,8), (12,3), (13,1), (9,6), (10,4), (11,2), (11,1), (9,3) and (9,2) with diameters from ~0.8 to 1.1 nm are monitored using a time resolution of several minutes. The growth mechanism of inner tubes implies two successive stages of the growth on the carburized and purely metallic catalytic particles, respectively, which are formed as a result of the thermally induced decomposition of metallocenes inside the outer SWCNTs. The activation energies of the growth on carburized Ni and Co catalytic particles amount to 1.85-2.57 eV and 1.80-2.71 eV, respectively. They decrease monotonically as the tube diameter decreases, independent of the metal type. The activation energies of the growth on purely metallic Ni and Co particles equal 1.49-1.91 eV and 0.77-1.79 eV, respectively. They increase as the tube diameter decreases. The activation energies of the growth of large-diameter tubes (dt = ~0.95-1.10 nm) on Ni catalyst are significantly larger than on Co catalyst, whereas the values of small-diameter tubes (dt = ~0.80-0.95 nm) are similar. For both metals, no dependence of the activation energies on the chirality of inner tubes is observed.

Spectroscopy of Filled Single-Walled Carbon Nanotubes.

Many envisaged applications, such as nanoelectronics, photovoltaics, thermoelectric power generation, light-emission devices, energy storage and biomedicine, necessitate single-walled carbon nanotube (SWCNT) samples with specific uniform electronic properties. The precise investigation of the electronic properties of filled SWCNTs on a qualitative and quantitative level is conducted by optical absorption spectroscopy, Raman spectroscopy, photoemission spectroscopy and X-ray absorption spectroscopy. This review is dedicated to the description of the spectroscopic methods for the analysis of the electronic properties of filled SWCNTs. The basic principle and main features of SWCNTs as well as signatures of doping-induced modifications of the spectra of filled SWCNTs are discussed.

Characterizing the maximum number of layers in chemically exfoliated graphene.

An efficient route to synthesize macroscopic amounts of graphene is highly desired and bulk characterization of such samples, in terms of the number of layers, is equally important. We present a Raman spectroscopy-based method to determine the typical upper limit of the number of graphene layers in chemically exfoliated graphene. We utilize a controlled vapour-phase potassium intercalation technique and identify a lightly doped stage, where the Raman modes of undoped and doped few-layer graphene flakes coexist. The spectra can be unambiguously distinguished from alkali doped graphite, and modeling with the typical upper limit of the layers yields an upper limit of flake thickness of five layers with a significant single-layer graphene content. Complementary statistical AFM measurements on individual few-layer graphene flakes find a consistent distribution of the layer numbers.

Feedstock-dependent nitrogen configurations of nitrogen-doped single-walled carbon nanotubes in a CVD process.

The modification of nitrogen configurations is a viable way to control the electronic properties of nitrogen-doped single-walled carbon nanotubes (N-doped SWCNTs). N-doped SWCNTs were synthesized by a conventional chemical vapor deposition process with a mixed carbon/nitrogen (C/N) feedstock. While higher feedstock flow rates promote the formation of encapsulated N2 molecules, lower flow rates show a predominance of pyridinic and graphitic nitrogen structures as revealed by X-ray photoemission spectroscopy. Therefore, the nitrogen doping in the sp2 carbon network can be controlled by the flow rate of the C/N feedstock.

Insights into radiation damage from atomic resolution scanning transmission electron microscopy imaging of mono-layer CuPcCl16 films on graphene.

Atomically resolved images of monolayer organic crystals have only been obtained with scanning probe methods so far. On the one hand, they are usually prepared on surfaces of bulk materials, which are not accessible by (scanning) transmission electron microscopy. On the other hand, the critical electron dose of a monolayer organic crystal is orders of magnitudes lower than the one for bulk crystals, making (scanning) transmission electron microscopy characterization very challenging. In this work we present an atomically resolved study on the dynamics of a monolayer CuPcCl16 crystal under the electron beam as well as an image of the undamaged molecules obtained by low-dose electron microscopy. The results show the dynamics and the radiation damage mechanisms in the 2D layer of this material, complementing what has been found for bulk crystals in earlier studies. Furthermore, being able to image the undamaged molecular crystal allows the characterization of new composites consisting of 2D materials and organic molecules.

Software electron counting for low-dose scanning transmission electron microscopy.

The performance of the detector is of key importance for low-dose imaging in transmission electron microscopy, and counting every single electron can be considered as the ultimate goal. In scanning transmission electron microscopy, low-dose imaging can be realized by very fast scanning, however, this also introduces artifacts and a loss of resolution in the scan direction. We have developed a software approach to correct for artifacts introduced by fast scans, making use of a scintillator and photomultiplier response that extends over several pixels. The parameters for this correction can be directly extracted from the raw image. Finally, the images can be converted into electron counts. This approach enables low-dose imaging in the scanning transmission electron microscope via high scan speeds while retaining the image quality of artifact-free slower scans.

Chirality-dependent growth of single-wall carbon nanotubes as revealed inside nano-test tubes.

Growth dynamics of single-wall carbon nanotubes (SWCNTs) have been studied with nickelocene as a precursor encapsulated in the interior of template SWCNTs. By means of multi-laser Raman spectroscopy, growth curves of nine different SWCNTs, (8,8), (12,3), (13,1), (9,6), (10,4), (11,2), (11,1), (9,3) and (9,2), have been determined upon in situ annealing at various temperatures. The data reveal that the nanotubes grow through fast and slow reaction pathways with high and low activation energies, respectively. While the activation energy of the slow growth is independent of the nanotube's chiral vector, that of the fast growth exhibits a monotonic increase as the tube diameter reduces from ∼1.1 down to 0.8 nm and no dependency on the chiral angle, which can be attributed to the size-dependent properties of catalyst clusters. The chirality dependent catalytic growth properties exploited in this study provide the basis for a large-scale synthesis of single-chiral vector SWCNTs.