Ligand-directed immobilization of proteins through an esterase 2 fusion tag studied by atomic force microscopy.

Atomically flat mica surfaces were chemically modified with an alkyl trifluoromethyl ketone, a covalent inhibitor of esterase 2 from Alicyclobacillus acidocaldarius, which served as a tag for ligand-directed immobilization of esterase-linked proteins. Purified NADH oxidase from Thermus thermophilus and human exportin-t from cell lysates were anchored on the modified surfaces. The immobilization effectiveness of the proteins was studied by atomic force microscopy (AFM). It was shown that ligand-esterase interaction allowed specific attachment of exportin-t and resulted in high-resolution images and coverage patterns that were comparable with immobilized purified protein. Moreover, the biological functionality of immobilized human exportin-t in forming a quaternary complex with tRNA and the GTPase Ran-GTP, and the dimension changes before and after complex formation were also determined by AFM.

Reversible tuning of a block-copolymer nanostructure via electric fields.

Block copolymers consisting of incompatible components self-assemble into microphase-separated domains yielding highly regular structures with characteristic length scales of the order of several tens of nanometres. Therefore, in the past decades, block copolymers have gained considerable potential for nanotechnological applications, such as in nanostructured networks and membranes, nanoparticle templates and high-density data storage media. However, the characteristic size of the resulting structures is usually determined by molecular parameters of the constituent polymer molecules and cannot easily be adjusted on demand. Here, we show that electric d.c. fields can be used to tune the characteristic spacing of a block-copolymer nanostructure with high accuracy by as much as 6% in a fully reversible way on a timescale in the range of several milliseconds. We discuss the influence of various physical parameters on the tuning process and study the time response of the nanostructure to the applied field. A tentative explanation of the observed effect is given on the basis of anisotropic polarizabilities and permanent dipole moments of the monomeric constituents. This electric-field-induced effect further enhances the high technological potential of block-copolymer-based soft-lithography applications.

Direct observation of single molecule mobility in semidilute polymer solutions.

We determine the mobility of dye-labeled polystyrene molecules in solution by fluorescence correlation spectroscopy (FCS) over a wide range of concentrations and molecular weights (ranging from 3.9 x 10{3} to 1550 x 10{3} g/mol ). In order to obtain absolute values of the diffusion coefficient, which can be compared to diffusion coefficients determined by other methods, the size of the focal volume has been determined by independent experiments and theoretical calculations. All data demonstrate that FCS is uniquely suited to explore polymer dynamics in solution. The mobility of the chains as expressed through the self-diffusion coefficient is significantly slowed down above the overlap concentration c{*}. The dependence of c{*} on molecular weight is well described by the power law c{*} proportional, variant M{w};{1-3nu} ( nu: Flory exponent). A comparison with the data taken from the literature demonstrates that the overlap concentration presents a robust concept that holds for a wide range of molecular weights.

Combinatorial preparation and characterization of thin-film multilayer electro-optical devices.

In this article we present a setup for the combinatorial vapor deposition of thin-film multilayer devices as well as methods for the fast and efficient analytic screening of the libraries obtained. The preparation setup is based on a commercially available evaporation chamber equipped with various evaporation sources for both organic and metallic materials. The combinatorial approach is realized by the combination of a rotation stage for the substrate, a five-mask sampler, and an additional mask whose position can be deliberately varied along one axis during the evaporation process. The latter is used to evaporate linear as well as step gradients by continuous or stepwise movement of a shutter mask. The mask sampler allows to define the sectors of the library and to evaporate more complex structures, e.g., an electrode layout. Finally, the simultaneous evaporation of two or more materials enables us to produce layers of varying composition ratio in general and doped materials, in particular. For the control of the evaporation process we have developed an automation software, which is particularly helpful for complex library designs and which grants excellent repeatability of experiments. Efficient and fast characterization of the obtained libraries is realized by (i) a purely optical setup and (ii) an electro-optical setup. (i) The UV/vis reader FLASHScan 530 permits to map out the UV/vis absorbance or fluorescence of the whole library. The UV/vis absorbance is primarily used to determine layer thicknesses and to confirm thickness uniformity across larger regions. The fluorescence measurements are used to determine the composition of layers containing fluorescent dyes. (ii) For a detailed short- and long-term electro-optical analysis we have developed an automated measurement system, which allows the characterization of 8x8 optoelectronic devices and to study their degradation behavior. Both solar cells and organic light-emitting diodes can be tested. Finally, we have developed a data analysis software to extract characteristic values from the huge amount of data and with this facilitate the finding of systematic dependencies.

Towards nanoporous membranes based on ABC triblock terpolymers.

Block copolymers represent an exciting class of complex materials as they self-assemble into highly regular structures of nanoscopic dimensions. When prepared as thin films, such structures can be used for a variety of applications including lithographic masks or nanoporous membranes. Reported here are nanostructures in thin films of structurally analogous polybutadiene-block-poly(2-vinyl pyridine)-block-poly(tert-butyl methacrylate) (BVT) and polystyrene-block-poly(2-vinyl pyridine)-block-poly(tert-butyl methacrylate) (SVT) triblock terpolymers, which are synthesized via sequential living anionic polymerization. The morphological behavior of annealed SVT and BVT films is investigated by scanning force and electron microscopies. The difference in the terpolymer composition results in the formation of an ordered perforated lamella phase in SVT films and hexagonally packed core/shell cylinders in BVT films. Further, the BVT films show high potential for the fabrication of composite membranes using track-etched poly(ethylene terephthalate) macroporous filters as a support.

Nanoscaling of microdomain spacings in thin films of cylinder-forming block copolymers.

We present first quantitative measurements of the characteristic lateral dimensions in thin films of cylinder-forming block copolymers. Using a metrological scanning force microscope and tailor-made image analysis, we map out lateral distances with subnanometer accuracy. Microdomain spacings change in a systematic way as a function of the film thickness and as a function the lateral cylinder bending. We show that in very thin films the unit cell is stretched perpendicular to the plane of the film resulting in lateral distances smaller than those in bulk. The changes are distinct, although small, and can be rationalized within the framework of the strong segregation theory of block copolymers.

Defect evolution in block copolymer thin films via temporal phase transitions.

We study the details of the defect dynamics in thin films of a cylinder-forming polystyrene-block-polybutadiene (SB) diblock copolymer melt. The high temporal resolution of in-situ scanning force microscopy (SFM) uncovers elementary dynamic processes of structural rearrangements on time scales not accessible so far. Short-term interfacial undulations and the formation of transient phases (spheres, perforated lamellae, and lamellae) are observed. We demonstrate that the well-known structural defects are annihilated by short-term phase transitions into what may be considered excited states. These temporary phase transitions are reproduced in simulations based on dynamic self-consistent field theory. We discuss the role of the observed structural evolution in the context of the equilibrium phase behavior in SB thin films.

Janus particles at liquid-liquid interfaces.

Following recent theoretical predictions, we report on the first experiments on the interfacial activity of so-called Janus nanoparticles (i.e., bifacial particles consisting of a gold and an iron oxide moiety). Using pendant drop tensiometry, we show that the amphiphilicity derived from the Janus character of the particles leads to a significantly higher interfacial activity compared to that of the respective homogeneous particles of the same size. The self-assembly of Janus particles at the hexane-water interface results in a significant decrease in the interfacial tension. Furthermore, we demonstrate control over the interfacial activity by tuning the particles' amphiphilicity via ligand-exchange reactions.

Large scale alignment of a lamellar block copolymer thin film via electric fields: a time-resolved SFM study.

We have devised a novel route towards a nanoscopically striped surface pattern with long range order the self-assembly of an ABC triblock terpolymer thin film exposed to an in-plane electric field. the interplay between surface interactions and the effect of the electric field the lamellae were oriented both perpendicular to the plane of the film and parallel to the electric field. Moreover, quasi scanning force microscopy measurements were used to follow the reorientation process as a function of time and to yield insight into the microscopic steps eventually leading to the ordered microdomain structure.

Influence of initial order on the microscopic mechanism of electric field induced alignment of block copolymer microdomains.

We investigate the mechanism of microdomain orientation in concentrated block copolymer solutions exposed to a dc electric field by in situ synchrotron small-angle X-ray scattering (SAXS). As a model system, we use concentrated solutions of a lamellar polystyrene-b-polyisoprene block copolymer in toluene. We find that both the microscopic mechanism of reorientation and the kinetics of the process strongly depend on the initial degree of order in the system. In a highly ordered lamellar system with the lamellae being aligned perpendicular to the electric field vector, only nucleation and growth of domains is possible as a pathway to reorientation and the process proceeds rather slowly. In less ordered samples, grain rotation becomes possible as an alternative pathway, and the process proceeds considerably faster. The interpretation of our finding is strongly corroborated by dynamic self-consistent field simulations.

Investigation of micelle formation by fluorescence correlation spectroscopy.

We show that noncovalently bound dye molecules can be used as labels in single-molecule fluorescence experiments for the determination of aggregate formation in standard surfactant systems. Aqueous solutions of sulfosuccinic acid bis(2-ethylhexyl) ester sodium salt, hexadecyltrimethylammonium chloride, and pentaethylene glycol monododecyl ether have been studied by fluorescence correlation spectroscopy using commercially available dyes. The translational diffusion coefficient and the critical micelle concentrations have been determined and compare well to values reported in the literature. The respective charges of the surfactant and of the dye molecule are crucial for the effectiveness of the presented method.

Phase behavior in thin films of cylinder-forming ABA block copolymers: experiments.

We experimentally establish a phase diagram of thin films of concentrated solutions of a cylinder forming polystyrene-block-polybutadiene-block-polystyrene triblock copolymer in chloroform. During annealing the film forms islands and holes with energetically favored values of film thickness. The thin film structure depends on the local thickness of the film and the polymer concentration. Typically, at a thickness close to a favored film thickness parallel orientation of cylinders is observed, while perpendicular orientation is formed at an intermediate film thickness. At high polymer concentration the cylindrical microdomains reconstruct to a perforated lamella structure. Deviations from the bulk structure, such as the perforated lamella and a wetting layer are stabilized in films thinner than approximately 1.5 domain spacings.

Self-assembly of functional nanostructures from ABC triblock copolymers.

The spontaneous formation of nanostructured materials by molecular self-assembly of block copolymers is an active area of research, driven both by its inherent beauty and by a wealth of potential technological applications. Thin films of block copolymers have attracted increasing interest, particularly in view of possible applications in nanotechnology. Although much of the work has concentrated on block copolymers consisting of two components, the insertion of a third block greatly enlarges the structural diversity and allows incorporation of additional chemical functionality. Here we describe a highly ordered hexagonally perforated lamella structure based on an ABC triblock copolymer thin film. By suitable choice of the three blocks a versatile structure is formed. The perforated lamella can serve as a lithographic mask, it can be chemically converted into an amphiphilic structure without losing its order, and after selective removal of one of its constituents it could be used as a responsive membrane. Intriguingly, the particular choice of the blocks ensures that the structure is formed irrespective of the chemical nature of the solid substrate. The experimental results are supported by mesoscale computer simulations.

Comparative thermodynamic analysis of DNA--protein interactions using surface plasmon resonance and fluorescence correlation spectroscopy.

We report a kinetic and thermodynamic analysis of interactions between ssDNA and replication protein A (RPA) using surface plasmon resonance (SPR) and fluorescence correlation spectroscopy (FCS) at variable temperature. The two methods yield different values for the Gibbs free energy but nearly the same value for the reaction enthalpy of ssDNA-RPA complex formation. The Gibbs free energy was determined by SPR and FCS to be -62.6 and -54.7 kJ/mol, respectively. The values for the reaction enthalpy are -64.4 and -66.5 kJ/mol. It is concluded that the difference in Gibbs free energy measured by the two methods is due to different reaction entropies. The entropic contribution to the free energy at 25 degrees C is -1.8 kJ/mol for SPR and -11.8 kJ/mol for FCS. In SPR, the reaction is restricted to two dimensions because of immobilization of the DNA molecules to the sensor surface. In contrast, FCS is able to follow complex formation without spatial restrictions. In consequence, the reaction entropy determined from SPR experiments is lower than for FCS experiments.

Amphiphilic Janus micelles with polystyrene and poly(methacrylic acid) hemispheres.

We describe the synthesis and the solution properties of Janus micelles containing a polybutadiene (PB) core and a compartmentalized corona consisting of a poly(methacrylic acid) (PMAA) and a polystyrene (PS) hemisphere. The Janus micelles were obtained via cross-linking the middle block of a microphase-separated PS-block-PB-block-PMMA triblock copolymer in the bulk state, followed by alkaline hydrolysis of the poly(methyl methacrylate) (PMMA) ester groups. Results of fluorescence correlation spectroscopy, field flow fractionation, light scattering, cryogenic transmission electron microscopy, scanning electron microscopy, and scanning force microscopy indicate that above a critical aggregation concentration of about 0.03 g/L spherical supermicelles are formed from about 30 PS-PMAA micelles in aqueous solution in the presence of NaCl. These supermicelles have radii of 40-60 nm, significantly increasing on ionization (pH >6). In addition, very large spherical objects are observed with radii of 100-250 nm.