Soluble Frizzled-related proteins promote exosome-mediated Wnt re-secretion.

Wnt proteins are thought to be transported in several ways in the extracellular space. For instance, they are known to be carried by exosomes and by Wnt-carrier proteins, such as sFRP proteins. However, little is known about whether and/or how these two transport systems are related. Here, we show that adding sFRP1 or sFRP2, but not sFRP3 or sFRP4, to culture medium containing Wnt3a or Wnt5a increases re-secretion of exosome-loaded Wnt proteins from cells. This effect of sFRP2 is counteracted by heparinase, which removes sugar chains on heparan sulfate proteoglycans (HSPGs), but is independent of LRP5/6, Wnt co-receptors essential for Wnt signaling. Wnt3a and Wnt5a specifically dimerize with sFRP2 in culture supernatant. Furthermore, a Wnt3a mutant defective in heterodimerization with sFRP2 impairs the ability to increase exosome-mediated Wnt3a re-secretion. Based on these results, we propose that Wnt heterodimerization with its carrier protein, sFRP2, enhances Wnt accumulation at sugar chains on HSPGs on the cell surface, leading to increased endocytosis and exosome-mediated Wnt re-secretion. Our results suggest that the range of action of Wnt ligands is controlled by coordination of different transport systems.

Amyloid conformation-dependent disaggregation in a reconstituted yeast prion system.

Disaggregation of amyloid fibrils is a fundamental biological process required for amyloid propagation. However, due to the lack of experimental systems, the molecular mechanism of how amyloid is disaggregated by cellular factors remains poorly understood. Here, we established a robust in vitro reconstituted system of yeast prion propagation and found that heat-shock protein 104 (Hsp104), Ssa1 and Sis1 chaperones are essential for efficient disaggregation of Sup35 amyloid. Real-time imaging of single-molecule fluorescence coupled with the reconstitution system revealed that amyloid disaggregation is achieved by ordered, timely binding of the chaperones to amyloid. Remarkably, we uncovered two distinct prion strain conformation-dependent modes of disaggregation, fragmentation and dissolution. We characterized distinct chaperone dynamics in each mode and found that transient, repeated binding of Hsp104 to the same site of amyloid results in fragmentation. These findings provide a physical foundation for otherwise puzzling in vivo observations and for therapeutic development for amyloid-associated neurodegenerative diseases.

Automatic Identification of the Stress Sources of Protein Aggregates Using Flow Imaging Microscopy Images.

A novel approach to identify 5 types of simulated stresses that induce protein aggregation in prefilled syringe-type biopharmaceuticals was developed. Principal components analyses of texture metrics extracted from flow imaging microscopy images were used to define subgroups of particles. Supervised machine learning methods, including convolutional neural networks, were used to train classifiers to identify subgroup membership of constituent particles to generate distribution profiles. The applicability of the stress-specific signatures for distinguishing stress source types was verified. The high classification efficiencies (100%) precipitated the collection of data from more than 20 independent experiments to train support vector machines, k-nearest neighbors, and ensemble classifiers. The performances of the trained classifiers were validated. High classification efficiencies for friability (80%-100%) and heating at 90°C (85%-100%) are indicative of high reliability of these methods for stress-stability assays while extreme variations in freeze-thawing (2%-100%) and heating at 60°C (2.25%-98.25%) indicate the unpredictability of particle composition profiles for these forced degradation conditions. We also developed subvisible particle classifiers using convolutional neural network to automatically identify silicone oil droplets, air bubbles, and protein aggregates. The developed classifiers will contribute to mitigating aggregation in biopharmaceuticals via the identification of stress sources.

Assessment of the Injection Performance of a Tapered Needle for Use in Prefilled Biopharmaceutical Products.

The design of injection devices, including prefilled syringes (PFSs) and autoinjectors, requires an understanding of the optimization of injection conditions. The injection of highly concentrated biopharmaceuticals can lead to exceptionally high injection forces, due to their high viscosity. To overcome this challenge, a tapered needle has been recently developed by Terumo Corporation. In the present study, we measured the injection forces in PFSs equipped with 24G-29G tapered needle (29G TNN), 27G thin-wall needle (27G TW), and 29G TW using several model and pharmaceutical protein solutions. The injection forces measured in the 29G TNN PFSs were lower than those in 29G TW for all solutions, similar to those in 27G TW PFSs for Newtonian solutions, and were lower than those in the 27G TW PFSs for non-Newtonian solutions which demonstrated shear-thinning behavior. No significant changes in aggregates or micron-size particle concentrations were observed upon injection, regardless of the needle type. Mathematical modeling supported the experimental findings that under similar flow rate conditions injection pressure in a tapered needle is lower than that in a cylindrical needle. Our results indicate that there are advantages of using tapered needles for the injection of biopharmaceutical formulations particularly those showing shear-thinning behavior.

An Assessment of the Ability of Submicron- and Micron-Size Silicone Oil Droplets in Dropped Prefillable Syringes to Invoke Early- and Late-Stage Immune Responses.

A number of biopharmaceuticals are available as lyophilized formulations along with a prefilled syringe (PFS) containing water for injection (WFI). Submicron- and micron-size droplets of lubricating silicone oil (SO) applied to the inner surface of the PFS barrel might migrate into the WFI, to which protein pharmaceuticals can adsorb, potentially inducing an immune response. In the present study, we subjected siliconized cyclo-olefin polymer PFSs filled with WFI to dropping stress to simulate actual shipping conditions as well as evaluated the risk associated with the released SO droplets. The results confirmed the undesirable effects of SO on therapeutic proteins, including adsorption to SO droplets and increased secretion of several innate cytokines from human peripheral blood mononuclear cells of a small donor panel. Assessment of immunogenicity in vivo using BALB/c mice revealed a slight increase in the plasma concentrations of antidrug antibodies over 21 days in response to SO-containing antibody samples compared to the absence of SO. These results indicate that SO droplets form complexes with pharmaceutical proteins that can potentially invoke early- and late-stage immune responses. Therefore, the use of SO-free cyclo-olefin polymer PFSs as primary containers for WFI could contribute to the enhanced safety of reconstituted biopharmaceuticals.

Quantitative Laser Diffraction for Quantification of Protein Aggregates: Comparison With Resonant Mass Measurement, Nanoparticle Tracking Analysis, Flow Imaging, and Light Obscuration.

In the past, analysis of micron-sized (>1.0 µm) aggregates of therapeutic proteins has been limited to light obscuration (LO), and appropriate quantitative methods of evaluating protein aggregates need to be developed. Recently, novel methods with enhanced reliability and sensitivity, such as nanoparticle tracking analysis (NTA), resonant mass measurement (RMM), and flow imaging (FI), have emerged. We have found that quantitative laser diffraction (qLD) is also effective for quantitative evaluation of protein aggregates over a wide size range. However, the different detection principles of the methods potentially lead to inconsistencies in results. This study aimed to compare particle size distributions and concentrations of protein aggregates using the orthogonal methods. Protein aggregates were generated by stirring an immunoglobulin solution. Serial dilutions of the aggregates stock were analyzed by RMM, FI, and qLD to obtain the particle size distribution and concentration using each method. In addition, size distribution of a protein aggregates solution was compared by RMM, NTA, FI, LO, and qLD. Both particle size distribution and concentration were in good agreement between RMM and qLD (0.3-2 µm) and between FI and qLD (2-20 µm). Thus, we concluded that qLD enables covering of the overlapping particle size range between RMM and FI.

Assembly of protein complexes restricts diffusion of Wnt3a proteins.

Members of the Wnt protein family play roles in many aspects of embryogenesis and homeostasis. Despite their biological significance, characteristics of Wnt proteins still remain unclear, mainly due to their insolubility after the removal of serum. Here we examine Wnt proteins in serum-containing media by using analytical ultracentrifugation with a fluorescence detection system. This analysis reveals that Wnt3a assembles into high-molecular-weight complexes that become dissociable by interaction with the extracellular domain of the Frizzled8 receptor or secreted Wnt-binding protein sFRP2. Cross-linking and single-particle analyses of Wnt3a fractionated by gel filtration chromatography show the homo-trimer to be the smallest form of the assembled Wnt3a complexes. Fluorescence correlation spectroscopy and immunohistochemistry reveal that the assembly of Wnt3a complexes restricted their diffusion and signaling range in Xenopus laevis embryos. Thus, we propose that the Wnt diffusion range can be controlled by a balance between the assembly of Wnt complexes and their dissociation.

Sedimentation velocity analytical ultracentrifugation for characterization of therapeutic antibodies.

Sedimentation velocity analytical ultracentrifugation (SV-AUC) coupled with direct computational fitting of the observed concentration profiles (sedimentating boundary) have been developed and widely used for the characterization of macromolecules and nanoparticles in solution. In particular, size distribution analysis by SV-AUC has become a reliable and essential approach for the characterization of biopharmaceuticals including therapeutic antibodies. In this review, we describe the importance and advantages of SV-AUC for studying biopharmaceuticals, with an emphasis on strategies for sample preparation, data acquisition, and data analysis. Recent discoveries enabled by AUC with a fluorescence detection system and potential future applications are also discussed.

Analytical ultracentrifugation with fluorescence detection system reveals differences in complex formation between recombinant human TNF and different biological TNF antagonists in various environments.

A number of studies have attempted to elucidate the binding mechanism between tumor necrosis factor (TNF) and clinically relevant antagonists. None of these studies, however, have been conducted as close as possible to physiologic conditions, and so the relationship between the size distribution of TNF-antagonist complexes and the antagonists' biological activity or adverse effects remains elusive. Here, we characterized the binding stoichiometry and sizes of soluble TNF-antagonist complexes for adalimumab, infliximab, and etanercept that were formed in human serum and in phosphate-buffered saline (PBS). Fluorescence-detected sedimentation velocity analytical ultracentrifugation analyses revealed that adalimumab and infliximab formed a range of complexes with TNF, with the major complexes consisting of 3 molcules of the respective antagonist and one or 2 molcules of TNF. Considerably greater amounts of high-molecular-weight complexes were detected for infliximab in human serum. The emergence of peaks with higher sedimentation coefficients than the adalimumab monomer as a function of added human serum albumin (HSA) concentration in PBS suggested weak reversible interactions between HSA and immunoglobulins. Etanerept exclusively formed 1:1 complexes with TNF in PBS, and a small amount of complexes with higher stoichiometry was detected in human serum. Consistent with these biophysical characterizations, a reporter assay showed that adalimumab and infliximab, but not etanercept, exerted FcγRIIa- and FcγRIIIa-mediated cell signaling in the presence of TNF and that infliximab exhibited higher potency than adalimumab. This study shows that assessing distribution profiles in serum will contribute to a more comprehensive understanding of the in vivo behavior of therapeutic proteins.

Structural Analysis Reveals that Toll-like Receptor 7 Is a Dual Receptor for Guanosine and Single-Stranded RNA.

Toll-like receptor 7 (TLR7) is a single-stranded RNA (ssRNA) sensor in innate immunity and also responds to guanosine and chemical ligands, such as imidazoquinoline compounds. However, TLR7 activation mechanism by these ligands remain largely unknown. Here, we generated crystal structures of three TLR7 complexes, and found that all formed an activated m-shaped dimer with two ligand-binding sites. The first site conserved in TLR7 and TLR8 was used for small ligand-binding essential for its activation. The second site spatially distinct from that of TLR8 was used for a ssRNA-binding that enhanced the affinity of the first-site ligands. The first site preferentially recognized guanosine and the second site specifically bound to uridine moieties in ssRNA. Our structural, biochemical, and mutagenesis studies indicated that TLR7 is a dual receptor for guanosine and uridine-containing ssRNA. Our findings have important implications for understanding of TLR7 function, as well as for therapeutic manipulation of TLR7 activation.

Structural and binding properties of laminarin revealed by analytical ultracentrifugation and calorimetric analyses.

One of the ß-1,3-glucans, laminarin, has been widely used as a substrate for enzymes including endo-1,3-ß-glucanase. To obtain quantitative information about the molecular interaction between laminarin and endo-1,3-ß-glucanase, the structural properties of laminarin should be determined. The results from pioneering work using analytical ultracentrifugation for carbohydrate analysis showed that laminarin from Laminaria digitata predominantly exists as a single-chain species with approximately 5% of triple-helical species. Differential scanning calorimetry experiments did not show a peak assignable to the transition from triple-helix to single-chain, supporting the notion that a large proportion of laminarin is the single-chain species. The interaction of laminarin with an inactive variant of endo-1,3-ß-glucanase from Cellulosimicrobium cellulans, E119A, was quantitatively analyzed using isothermal titration calorimetry. The binding was enthalpically driven and the binding affinity was approximately 10(6) M(-1). The results from binding stoichiometric analysis indicated that on average, E119A binds to laminarin in a 2:1 ratio. This seems to be reasonable, because laminarin mainly exists as a monomer, the apparent molecular mass of laminarin is 3.6 kDa, and E119A would have substrate-binding subsites corresponding to 6 glucose units. The analytical ultracentrifugation experiments could detect different complex species of laminarin and endo-1,3-ß-glucanase.

Structure of IZUMO1-JUNO reveals sperm-oocyte recognition during mammalian fertilization.

Fertilization is a fundamental process in sexual reproduction, creating a new individual through the combination of male and female gametes. The IZUMO1 sperm membrane protein and its counterpart oocyte receptor JUNO have been identified as essential factors for sperm-oocyte interaction and fusion. However, the mechanism underlying their specific recognition remains poorly defined. Here, we show the crystal structures of human IZUMO1, JUNO and the IZUMO1-JUNO complex, establishing the structural basis for the IZUMO1-JUNO-mediated sperm-oocyte interaction. IZUMO1 exhibits an elongated rod-shaped structure comprised of a helical bundle IZUMO domain and an immunoglobulin-like domain that are each firmly anchored to an intervening ß-hairpin region through conserved disulfide bonds. The central ß-hairpin region of IZUMO1 provides the main platform for JUNO binding, while the surface located behind the putative JUNO ligand binding pocket is involved in IZUMO1 binding. Structure-based mutagenesis analysis confirms the biological importance of the IZUMO1-JUNO interaction. This structure provides a major step towards elucidating an essential phase of fertilization and it will contribute to the development of new therapeutic interventions for fertility, such as contraceptive agents.

Taste substance binding elicits conformational change of taste receptor T1r heterodimer extracellular domains.

Sweet and umami tastes are perceived by T1r taste receptors in oral cavity. T1rs are class C G-protein coupled receptors (GPCRs), and the extracellular ligand binding domains (LBDs) of T1r1/T1r3 and T1r2/T1r3 heterodimers are responsible for binding of chemical substances eliciting umami or sweet taste. However, molecular analyses of T1r have been hampered due to the difficulties in recombinant expression and protein purification, and thus little is known about mechanisms for taste perception. Here we show the first molecular view of reception of a taste substance by a taste receptor, where the binding of the taste substance elicits a different conformational state of T1r2/T1r3 LBD heterodimer. Electron microscopy has showed a characteristic dimeric structure. Förster resonance energy transfer and X-ray solution scattering have revealed the transition of the dimerization manner of the ligand binding domains, from a widely spread to compactly organized state upon taste substance binding, which may correspond to distinct receptor functional states.

Haem-dependent dimerization of PGRMC1/Sigma-2 receptor facilitates cancer proliferation and chemoresistance.

Progesterone-receptor membrane component 1 (PGRMC1/Sigma-2 receptor) is a haem-containing protein that interacts with epidermal growth factor receptor (EGFR) and cytochromes P450 to regulate cancer proliferation and chemoresistance; its structural basis remains unknown. Here crystallographic analyses of the PGRMC1 cytosolic domain at 1.95 Å resolution reveal that it forms a stable dimer through stacking interactions of two protruding haem molecules. The haem iron is five-coordinated by Tyr113, and the open surface of the haem mediates dimerization. Carbon monoxide (CO) interferes with PGRMC1 dimerization by binding to the sixth coordination site of the haem. Haem-mediated PGRMC1 dimerization is required for interactions with EGFR and cytochromes P450, cancer proliferation and chemoresistance against anti-cancer drugs; these events are attenuated by either CO or haem deprivation in cancer cells. This study demonstrates protein dimerization via haem-haem stacking, which has not been seen in eukaryotes, and provides insights into its functional significance in cancer.

Novel helical assembly in arginine methyltransferase 8.

Protein arginine methyltransferase 8 (PRMT8) is unique among PRMTs, as it is specifically expressed in brain and localized to the plasma membrane via N-terminal myristoylation. Here, we describe the crystal structure of human PRMT8 (hPRMT8) at 3.0-Å resolution. The crystal structure of hPRMT8 exhibited a novel helical assembly. Biochemical, biophysical and mutagenesis experiments demonstrated that hPRMT8 forms an octamer in solution. This octameric structure is necessary for proper localization to the plasma membrane and efficient methyltransferase activity. The helical assembly might be a relevant quaternary form for hPRMT1, which is the predominant PRMT in mammalian cells and most closely related to hPRMT8.

Crystal structure of extracellular domain of human lectin-like transcript 1 (LLT1), the ligand for natural killer receptor-P1A.

Emerging evidence has revealed the pivotal roles of C-type lectin-like receptors (CTLRs) in the regulation of a wide range of immune responses. Human natural killer cell receptor-P1A (NKRP1A) is one of the CTLRs and recognizes another CTLR, lectin-like transcript 1 (LLT1) on target cells to control NK, NKT and Th17 cells. The structural basis for the NKRP1A-LLT1 interaction was limitedly understood. Here, we report the crystal structure of the ectodomain of LLT1. The plausible receptor-binding face of the C-type lectin-like domain is flat, and forms an extended ß-sheet. The residues of this face are relatively conserved with another CTLR, keratinocyte-associated C-type lectin, which binds to the CTLR member, NKp65. A LLT1-NKRP1A complex model, prepared using the crystal structures of LLT1 and the keratinocyte-associated C-type lectin-NKp65 complex, reasonably satisfies the charge consistency and the conformational complementarity to explain a previous mutagenesis study. Furthermore, crystal packing and analytical ultracentrifugation revealed dimer formation, which supports a complex model. Our results provide structural insights for understanding the binding modes and signal transduction mechanisms, which are likely to be conserved in the CTLR family, and for further rational drug design towards regulating the LLT1 function.

Structural basis of CpG and inhibitory DNA recognition by Toll-like receptor 9.

Innate immunity serves as the first line of defence against invading pathogens such as bacteria and viruses. Toll-like receptors (TLRs) are examples of innate immune receptors, which sense specific molecular patterns from pathogens and activate immune responses. TLR9 recognizes bacterial and viral DNA containing the cytosine-phosphate-guanine (CpG) dideoxynucleotide motif. The molecular basis by which CpG-containing DNA (CpG-DNA) elicits immunostimulatory activity via TLR9 remains to be elucidated. Here we show the crystal structures of three forms of TLR9: unliganded, bound to agonistic CpG-DNA, and bound to inhibitory DNA (iDNA). Agonistic-CpG-DNA-bound TLR9 formed a symmetric TLR9-CpG-DNA complex with 2:2 stoichiometry, whereas iDNA-bound TLR9 was a monomer. CpG-DNA was recognized by both protomers in the dimer, in particular by the amino-terminal fragment (LRRNT-LRR10) from one protomer and the carboxy-terminal fragment (LRR20-LRR22) from the other. The iDNA, which formed a stem-loop structure suitable for binding by intramolecular base pairing, bound to the concave surface from LRR2-LRR10. This structure serves as an important basis for improving our understanding of the functional mechanisms of TLR9.

Effects of syringe material and silicone oil lubrication on the stability of pharmaceutical proteins.

Currently, polymer-based prefillable syringes are being promoted to the pharmaceutical market because they provide an increased break resistance relative to traditionally used glass syringes. Despite this significant advantage, the possibility that barrel material can affect the oligomeric state of the protein drug exists. The present study was designed to compare the effect of different syringe materials and silicone oil lubrication on the protein aggregation. The stability of a recombinant fusion protein, abatacept (Orencia), and a fully human recombinant immunoglobulin G1, adalimumab (Humira), was assessed in silicone oil-free (SOF) and silicone oil-lubricated 1-mL glass syringes and polymer-based syringes in accelerated stress study. Samples were subjected to agitation stress, and soluble aggregate levels were evaluated by size-exclusion chromatography and verified with analytical ultracentrifugation. In accordance with current regulatory expectations, the amounts of subvisible particles resulting from agitation stress were estimated using resonant mass measurement and dynamic flow-imaging analyses. The amount of aggregated protein and particle counts were similar between unlubricated polymer-based and glass syringes. The most significant protein loss was observed for lubricated glass syringes. These results suggest that newly developed SOF polymer-based syringes are capable of providing biopharmaceuticals with enhanced physical stability upon shipping and handling.

Aggregation analysis of pharmaceutical human immunoglobulin preparations using size-exclusion chromatography and analytical ultracentrifugation sedimentation velocity.

In the pharmaceutical industry, analysis of soluble aggregates in pharmaceutical formulations is most commonly performed using size-exclusion chromatography (SEC). However, owing to concerns that aggregates can be overlooked by SEC analysis, it has been suggested that its results should be confirmed with orthogonal methods. One of the main alternative methods for SEC is analytical ultracentrifugation sedimentation velocity (AUC-SV), which has been indicated as an important tool for the measurement of protein aggregation. The present study aimed to show that AUC-SV can be effectively applied for the characterization of marketed immunoglobulin pharmaceutical preparations to support the results obtained by SEC. In addition, the present research aimed to assess the appropriateness of two integration approaches for the quantitative analysis of the SEC results. Thus, the aggregates were measured in seven different preparations of human immunoglobulins by AUC-SV and SEC, and the acquired chromatographic data were processed by using either the vertical drop method or the Gaussian skim approach, implemented in the Empower II chromatography data software (Waters, Tokyo, Japan). The results of aggregation measurements performed using AUC-SV were in good agreement with those obtained using SEC. As expected, the Gaussian skim integration approach inherently provided lower estimates of aggregation content than the results of the vertical drop method. The finding of this study confirmed the complementary nature of AUC-SV to SEC for aggregate composition analysis and underscored the important role that the different integration methods can play in the quantitative interpretation of chromatographic results.

Effects of rotational speed on the hydrodynamic properties of pharmaceutical antibodies measured by analytical ultracentrifugation sedimentation velocity.

Analytical ultracentrifugation sedimentation velocity (AUC-SV) has recently become one of the most important tools for the measurement of hydrodynamic properties of proteins. Although a number of studies using AUC-SV as applied to pharmaceutical antibodies have been conducted, the effect of rotational speed on molecular properties has not been systematically examined. The present study aimed to elucidate the influence of rotational speed on the hydrodynamic parameters of pharmaceutical antibodies. A monoclonal and a polyclonal antibody were studied by using AUC-SV at 5 different rotor speeds, and the acquired data were analyzed either by using the computer programs SEDFIT or UltraScan. The frictional ratio of the studied antibodies decreased at high rotor speeds, resulting in underestimation of molecular weight. The frictional ratio value of the monoclonal antibody measured at the low rotor speed was consistent with that of human immunoglobulin G1 computed from its three-dimensional structure. The best agreement between the measured molecular weight and the value calculated from the antibody sequence was achieved at the lower rotor speed. Similar to the results obtained using antibodies, AUC-SV analysis of human serum albumin revealed that the frictional ratio and apparent molecular weight behave in a speed-dependent manner. We deduced that the findings were mainly attributable to the hydrostatic pressure in the analytical ultracentrifuge. The current study implies that rotor speed should be carefully considered in antibody studies using AUC-SV.