Transfer semi-hydrogenation of terminal alkynes with a well-defined iron complex.

The synthesis and characterization of a bis-iron(II) complex was accomplished upon treatment of a phosphine free NNN-pincer ligand (L) with FeCl2·4H2O under ambient conditions. The deep greenish colored iron(II) complex (Fe-1) was characterized by a single-crystal X-ray diffraction study along with IR spectroscopy, UV-Vis spectroscopy, mass spectrometry, and elemental analysis. The Fe-1 complex was tested for the transfer semi-hydrogenation of terminal alkynes to the corresponding alkenes through the dehydrogenation of dimethyl amine-borane. This procedure enables the conversion of various structurally different terminal alkynes to alkenes under mild conditions. Control experiments were performed to shed light on the possible intermediates generated during the present protocol.

Organocatalyzed [4 + 2] cycloaddition of α,ß-unsaturated ketones and isatylidene malononitrile: accessing spiro[3-arylcyclohexanone]oxindole derivatives.

Herein, we developed a series of compounds featuring spiro[3-arylcyclohexanone]oxindoles through Barbas [4 + 2] cycloaddition reactions between isatylidene malononitrile and α,ß-unsaturated ketones using l-proline as an organocatalyst. The reported methodology offers many advantages such as mild reaction conditions, diverse substrate scope with high yields, easy reaction setup, and use of easily synthesizable starting materials.

Divergent access to polycyclic spiro- and fused-N,O-ketals through Bi(OTf)3-catalyzed [4+2]-annulation of cyclic N-sulfonyl ketimines and alkynols.

Bismuth(III) triflate-catalyzed [4+2]-annulation of cyclic N-sulfonyl ketimines (derived from saccharin) and alkynyl alcohols (4-pentyn-1-ols and 5-hexyn-1-ols) has been reported. This cascade annulation provides a diverse array of polycyclic spiro-and-fused N,O-ketals with excellent substrate scope, good isolated yields, and diastereoselectivities under mild reaction conditions.

Origin of Optoelectronic Contradictions in 3,4-Cycloalkyl[c]-chalcogenophenes: A Computational Study.

The planar morphology of the backbone significantly contributes to the subtle optoelectronic features of π-conjugated polymers. On the other hand, the atomistic tuning of an otherwise identical π-backbone could also impact optoelectronic properties systematically. In this manuscript, we compare a series of 3,4-cycloalkylchalcogenophenes by tuning them atomistically using group-16 elements. Additionally, the effect of systematically extending these building blocks in the form of oligomers and polymers is studied. The size of the 3,4-substitution affected the morphology of the oligomers. In addition, the heteroatoms contributed to a further alteration in their geometry and resultant optoelectronic properties. The chalcogenophenes, containing smaller 3,4-cycloalkanes, resulted in lower bandgap oligomers or polymers compared to those with larger 3,4-cycloalkanes. Natural bonding orbital (NBO) calculations were performed to understand the disparity alongside the contour maps of frontier molecular orbitals (FMO).

Carbamate-Protected (BOC and O-NB) 2-Aminopyrimidinedione-Based Janus G-C Nucleobase Motifs as Building Blocks for Supramolecular Assembly and Smart Polymers.

In this paper, we report "carbamate protected" 2-aminopyrimidinedione-based Janus G-C nucleobases (2-APD Janus G-C nucleobases) featuring polymerizable groups and self-complementary triple H-bonding motifs DDA and AAD as building blocks for developing smart polymers and self-healing materials. The carbamate-masked H-bonding motif, cleavable under acidic (BOC group) or photocleavable (O-nitrobenzyl group) conditions, would facilitate the synthesis of smart polymers by alleviating aggregation during polymerization which in turn would exclude self-assembly-assisted solubility issues. Ready accessibility in excellent yields coupled with the possibility for facile introduction of polymerizable groups would make these building blocks excellent candidates for diverse polymerization applications.

Pd(II)-Catalyzed Tandem Cycloannulative-Alkenylation of o-Alkynyl-Phenols/Anilines with (E)-ß-Iodovinyl Sulfones: A Direct Strategy To Construct 3-(Vinyl sulfonyl)benzoheterole Derivatives.

Benzoheteroles and vinyl sulfones are the most promising pharmaceutical relevance motifs, yet the hybrid analogues of these scaffolds still need to be explored. We report herein a general and highly efficient Pd(OAc)2-catalyzed intramolecular cyclization and vinylation of o-alkynylphenols/o-alkynylanilines with (E)-ß-iodovinyl sulfones under mild reaction conditions. A direct C(sp2)-C(sp2) cross-coupling is enabled for the diversity-oriented synthesis of vinyl sulfone-tethered benzofurans and indoles in good to high yields with excellent stereoselectivity. Notably, this tandem process was consistent at the gram scale, and in situ, generation of 2-(phenylethynyl)phenol has also been utilized in a scalable synthesis. Late-stage synthetic transformations were also further explored, including isomerization and desulfonylative-sulfenylation. Moreover, several control experiments were accomplished, and we proposed a plausible mechanism based on existing experimental results.

Total Synthesis and Absolute Configuration Determination of the α-Glycosidase Inhibitor (3S,4R)-6-Acetyl-3-hydroxy-2,2-dimethylchroman-4-yl (Z)-2-Methylbut-2-enoate from Ageratina grandifolia.

Herein, we report the first total synthesis of α-glycosidase inhibitor (3R, 4S)-6-acetyl-3-hydroxy-2,2-dimethylchroman-4-yl (Z)-2-methylbut-2-enoate as well as its enantiomer. Our synthesis confirms the chromane structure separately proposed by Navarro-Vazquez and Mata, on the basis of DFT computations. Furthermore, our synthesis allowed us to determine the absolute configuration of the natural compound as (3S, 4R) and not (3R, 4S).

Unified Radical Sulfonylative-Annulation of 1,6-Enynols with Sodium Sulfinates: A Modular Synthesis of 2,3-Disubstituted Benzoheteroles.

Benzoheteroles are valuable scaffolds in medicinal chemistry, but the direct synthesis of 3-vinyl benzoheterole analogues remains unexplored. A rationally designed new class of 1,6-enyne-containing propargylic alcohols has been prepared for the modular synthesis of 3-alkenyl benzoheteroles. Ag-catalyzed cascade radical sulfonylative-cycloannulation of 1,6-enynols with sodium sulfinates is realized to access a wide variety of 2,3-disubstituted benzoheteroles in good to high yields. Moreover, a three-component coupling of 1,6-enynols, aryldiazonium salts, and Na2S2O5 (as an SO2 surrogate) has been achieved to deliver benzoheterole derivatives in moderate to good yields. Of note, a scalable reaction and late-stage synthetic transformations were successfully demonstrated. A plausible mechanism is also presented based on the existing experimental results and control experiments.

Solvent-Driven Mono- and Bis-sulfenylation of (E)-ß-Iodovinyl Sulfones with Thiols for Flexible Synthesis of 1,2-Thiosulfonylalkenes and 1,2-Dithioalkenes.

The nature of solvent is a key factor for stereoselective mono- and bis-thiolation of (E)-ß-iodovinyl sulfones with thiols under basic conditions. A novel and unprecedented vicinal bisthiolation of (E)-ß-iodovinyl sulfones with thiols under the influence of K2CO3/DMSO at room temperature for quick assembly of (E)-1,2-dithio-1-alkenes is presented. Solvent-induced stereoselective monosulfenylation of (E)-ß-iodovinyl sulfones with thiols has also been established for the synthesis of both (E)- and (Z)-1,2-thiosulfonylethenes in MeCN and MeOH, respectively. Moreover, K2CO3-mediated desulfonylative-sulfenylation of (Z)-1,2-thiosulfonylethenes with thiols in DMSO furnished unsymmetrical (Z)-1,2-dithio-1-alkenes for the first time. The solvent-dependent versatile reactivity of (E)-ß-iodovinyl sulfones has been successfully explored to provide a set of (E)-/(Z)-1,2-dithio-1-alkenes and (E)-/(Z)-1,2-thiosulfonyl-1-alkenes in good to high yields with excellent stereoselectivities. Notably, this operationally simple process utilizes a broad substrate scope with good functional group tolerance and compatibility. The efficacy of the process has been proven for gram-scale reactions, and plausible mechanistic models are outlined on the basis of experimental results and control experiments.

Pure Curcumin Spherulites from Impure Solutions via Nonclassical Crystallization.

Crystallization experiments performed with highly supercooled solutions produced highly pure (>99 wt %) and highly crystalline mesocrystals of curcumin from impure solutions (∼22% of two structurally similar impurities) in one step. These mesocrystals exhibited a crystallographic hierarchy and were composed of perfectly or imperfectly aligned nanometer-thick crystallites. X-ray diffraction and spectroscopic analysis confirmed that the spherulites are a new solid form of curcumin. A theoretical hypothesis based on particle aggregation, double nucleation, and repeated secondary nucleation is proposed to explain the spherulite formation mechanism. The experimental results provide, for the first time, evidence for an organic molecule to naturally form spherulites without the presence of any stabilizing agents. Control experiments performed with highly supercooled pure solutions produced spherulites, confirming that the formation of spherulites is attributed to the high degree of supercooling and not due to the presence of impurities. Likewise, control experiments performed with a lower degree of supercooling produced impure crystals of curcumin via classical molecular addition mechanisms. Collectively, these experimental observations provide, for the first time, evidence for particle-mediated crystallization as an alternate and efficient method to purify organic compounds.

Mechanically Flexible Organic Crystals Achieved by Introducing Weak Interactions in Structure: Supramolecular Shape Synthons.

Controlling mechanical properties of ordered organic materials remains a formidable challenge, despite their great potential for high performance mechanical actuators, transistors, solar cells, photonics, and bioelectronics. Here we demonstrate a crystal engineering approach to design mechanically reconfigurable, plastically flexible single crystals (of about 10) of three unrelated types of compounds by introducing active slip planes in structures via different noninterfering supramolecular weak interactions, namely van der Waals (vdW), π-stacking, and hydrogen bonding groups. Spherical hydrophobic groups, which assemble via shape complementarity (shape synthons), reliably form low energy slip planes, thus facilitating an impressive mechanical flexibility, which allowed molding the crystals into alphabetical characters to spell out "o r g a n i c c r y s t a l". The study, which reports the preparation of a series of exotic plastic crystals by design for the first time, demonstrates the potential of soft interactions for tuning the mechanical behavior of ordered molecular materials, including those from π-conjugated systems.

Structure-mechanical property correlations in mechanochromic luminescent crystals of boron difluoride dibenzoylmethane derivatives.

The structure and mechanical properties of crystalline materials of three boron difluoride dibenzoylmethane (BF2dbm) derivatives were investigated to examine the correlation, if any, among mechanochromic luminescence (ML) behaviour, solid-state structure, and the mechanical behaviour of single crystals. Qualitative mechanical deformation tests show that the crystals of BF2dbm( (t) Bu)2 can be bent permanently, whereas those of BF2dbm(OMe)2 exhibit an inhomogeneous shearing mode of deformation, and finally BF2dbmOMe crystals are brittle. Quantitative mechanical analysis by nano-indentation on the major facets of the crystals shows that BF2dbm( (t) Bu)2 is soft and compliant with low values of elastic modulus, E, and hardness, H, confirming its superior suceptibility for plastic deformation, which is attributed to the presence of a multitude of slip systems in the crystal structure. In contrast, both BF2dbm(OMe)2 and BF2dbmOMe are considerably stiffer and harder with comparable E and H, which are rationalized through analysis of the structural attributes such as the intermolecular interactions, slip systems and their relative orientation with respect to the indentation direction. As expected from the qualitative mechanical behaviour, prominent ML was observed in BF2dbm( (t) Bu)2, whereas BF2dbm(OMe)2 exhibits only a moderate ML and BF2dbmOMe shows no detectable ML, all examined under identical conditions. These results confirm that the extent of ML in crystalline organic solid-state fluorophore materials can be correlated positively with the extent of plasticity (low recovery). In turn, they offer opportunities to design new and improved efficient ML materials using crystal engineering principles.