Impact of adipose-derived stem cells on aortic tensile strength in a model of abdominal aortic aneurysm.

Introduction: Abdominal Aortic Aneurysm (AAA) is a highly morbid condition and is the 11th leading cause of death in the United States. Treatment options are limited to operative interventions, with minimal non-operative options. Prior literature has demonstrated a benefit to the use of mesenchymal stem cells (MSCs) in attenuating AAA formation. We demonstrate the utility of MSCs in treating AAA in swine, focusing on the mechanical and structural characteristics of aortic tissue after treatment. Methods: 16 Yorkshire pigs underwent retroperitoneal exposure of the infrarenal aorta, with subsequent induction of AAA with peri-adventitial elastase and collagenase. A 1 × 4 cm piece of Gelfoam, an absorbable gelatin-based hemostatic agent, was soaked in media or human MSCs and placed directly on the vessel for control and experimental animals. At postoperative day 21, animals were sacrificed and the infrarenal aorta at this location was harvested for analysis. Tensile strength was measured using a tensiometer, from which Young's modulus and maximum strain were calculated. Results: All animals survived the surgery and post-operative course. Young's elastic modulus for the aneurysm control group was 15.83 ± 1.61 compared to 22.13 ± 2.34 for the stem cell treated segment, p = 0.0316. There was no significant difference in the peak stress between groups. Conclusions: This is the first study to demonstrate the mechanical effects of stem cell therapy on a model of AAA in swine. Young's modulus, which characterizes the intrinsic capacity of a tissue to withstand stress, was greater in the animals treated with MSCs compared to control animals with aneurysms. This methodology can be utilized in future large animal models to develop cell and drug-based therapies for AAA.

Development of a Model for Abdominal Aortic Aneurysms in Swine.

INTRODUCTION: Producing a reliable large-animal model of AAA has proven challenging. We sought to create a reproducible swine model of AAA using enzymatic degradation of the aortic wall. METHODS: Twelve male Yorkshire swine received periadventitial injections of type 1 collagenase and porcine pancreatic elastase into a 4 cm segment of infrarenal aorta. Nine survived until postoperative day (POD) 21. Aortic growth was monitored at 7 and 14 days using ultrasound. The animals were euthanized on POD 21, and the suprarenal (control) and infrarenal aorta were harvested for analysis, after gross measurement of aortic diameter (AD). Tensile strength was measured and additional segments were collected for histopathological analysis. PCR of matrix metalloproteinases (MMP9) was conducted. Groups were compared with paired t-tests, or ANOVA, where appropriate. RESULTS: Average percent growth of AD at POD 21 for treated segments was 27% versus 4.5% for control tissue. The average difference in AD by subject, was 26.7% (P<0.001). Aortic medial thickness was decreased in treated tissue; 235 µm versus 645 µm (P<0.0001). Quantities of both medial elastin fibers, and smooth muscles cells were decreased in treated tissue; 1.8% compared to 9.9% (P<0.0001), and 24% versus 37.4%, respectively. Tensile strength was also decreased in treated tissue; 16.7 MPa versus 29.5 MPa (P=0.0002). A 12-fold increase in expression of MMP9 mRNA was also demonstrated in aneurysmal tissue (P=0.002) CONCLUSION: A reproducible, large-animal model of AAA, with anatomical, histopathological, and biomechanical properties that are clinically translatable, can be achieved with extraluminal enzymatic degradation.

Synthesized biocompatible and conductive ink for 3D printing of flexible electronics.

Three-dimensional (3D) printing is an efficient technique for the fabrication of electronic devices. It also enables the use conductive of biomaterials in various applications, such as implants and flexible devices. Designing a new bioink is extremely challenging. For bioelectronics devices, bioink materials should be printable, flexible, conductive, harmless to cells, and sufficiently strong to maintain their shape when immersed in nutrients or under pressure. Over the past few years, several flexible conductive bioinks have been developed that are based on composite pastes containing a biopolymer and conductive micro- and nanoscale materials in the form of metallic particles, conducting polymers, or a mixture of them. Herein, we report a new strategy for the fabrication of a bioink for a commercial 3D printer with the desired conductivity, mechanical properties, and biocompatibility, using a poly(glycerol-co-sebacate) (PGS)-based polymer and zinc. The PGS-based polymer and lithium phenyl-2,4,6-trimethylbenzoylphosphinate (as a photoinitiator) were added to the zinc, and then, the prepared bioink was polymerized during 3D printing under visible light. According to a microstructural investigation using scanning electron microscopy, the zinc particles were homogeneously distributed in the PGSA matrix. The conductivity of bioink increases with chemical sintering and with an increase in the amount of zinc particles. Based on rheology tests, the appropriate printable composition is 60% zinc and 40% PGS-based polymer. This bioink exhibited remarkable mechanical and adhesive properties in comparison with the PGS-based polymer without zinc, according to tensile, compression, lap shear, wound closure, and burst pressure modules. In vitro and in vivo results indicated that the bioink was not toxic to the cells or the animal over a period of culturing.

Proximal Tubule-Derived Amphiregulin Amplifies and Integrates Profibrotic EGF Receptor Signals in Kidney Fibrosis.

BACKGROUND: Sustained activation of EGF receptor (EGFR) in proximal tubule cells is a hallmark of progressive kidney fibrosis after AKI and in CKD. However, the molecular mechanisms and particular EGFR ligands involved are unknown. METHODS: We studied EGFR activation in proximal tubule cells and primary tubular cells isolated from injured kidneys in vitro. To determine in vivo the role of amphiregulin, a low-affinity EGFR ligand that is highly upregulated with injury, we used ischemia-reperfusion injury or unilateral ureteral obstruction in mice with proximal tubule cell-specific knockout of amphiregulin. We also injected soluble amphiregulin into knockout mice with proximal tubule cell-specific deletion of amphiregulin's releasing enzyme, the transmembrane cell-surface metalloprotease, a disintegrin and metalloprotease-17 (ADAM17), and into ADAM17 hypomorphic mice. RESULTS: Yes-associated protein 1 (YAP1)-dependent upregulation of amphiregulin transcript and protein amplifies amphiregulin signaling in a positive feedback loop. YAP1 also integrates signals of other moderately injury-upregulated, low-affinity EGFR ligands (epiregulin, epigen, TGFα), which also require soluble amphiregulin and YAP1 to induce sustained EGFR activation in proximal tubule cells in vitro. In vivo, soluble amphiregulin injection sufficed to reverse protection from fibrosis after ischemia-reperfusion injury in ADAM17 hypomorphic mice; injected soluble amphiregulin also reversed the corresponding protective proximal tubule cell phenotype in injured proximal tubule cell-specific ADAM17 knockout mice. Moreover, the finding that proximal tubule cell-specific amphiregulin knockout mice were protected from fibrosis after ischemia-reperfusion injury or unilateral ureteral obstruction demonstrates that amphiregulin was necessary for the development of fibrosis. CONCLUSIONS: Our results identify amphiregulin as a key player in injury-induced kidney fibrosis and suggest therapeutic or diagnostic applications of soluble amphiregulin in kidney disease.

Bioionic Liquid Conjugation as Universal Approach To Engineer Hemostatic Bioadhesives.

Adhesion to wet and dynamic surfaces is vital for many biomedical applications. However, the development of effective tissue adhesives has been challenged by the required combination of properties, which includes mechanical similarity to the native tissue, high adhesion to wet surfaces, hemostatic properties, biodegradability, high biocompatibility, and ease of use. In this study, we report a novel bioinspired design with bioionic liquid (BIL) conjugated polymers to engineer multifunctional highly sticky, biodegradable, biocompatible, and hemostatic adhesives. Choline-based BIL is a structural precursor of the phospholipid bilayer in the cell membrane. We show that the conjugation of choline molecules to naturally derived polymers (i.e., gelatin) and synthetic polymers (i.e., polyethylene glycol) significantly increases their adhesive strength and hemostatic properties. Synthetic or natural polymers and BILs were mixed at room temperature and cross-linked via visible light photopolymerization to make hydrogels with tunable mechanical, physical, adhesive, and hemostatic properties. The hydrogel adhesive exhibits a close to 50% decrease in the total blood volume loss in tail cut and liver laceration rat animal models compared to the control. This technology platform for adhesives is expected to have further reaching application vistas from tissue repair to wound dressings and the attachment of flexible electronics.

Hybrid Microscopy: Enabling Inexpensive High-Performance Imaging through Combined Physical and Optical Magnifications.

To date, much effort has been expended on making high-performance microscopes through better instrumentation. Recently, it was discovered that physical magnification of specimens was possible, through a technique called expansion microscopy (ExM), raising the question of whether physical magnification, coupled to inexpensive optics, could together match the performance of high-end optical equipment, at a tiny fraction of the price. Here we show that such "hybrid microscopy" methods--combining physical and optical magnifications--can indeed achieve high performance at low cost. By physically magnifying objects, then imaging them on cheap miniature fluorescence microscopes ("mini-microscopes"), it is possible to image at a resolution comparable to that previously attainable only with benchtop microscopes that present costs orders of magnitude higher. We believe that this unprecedented hybrid technology that combines expansion microscopy, based on physical magnification, and mini-microscopy, relying on conventional optics--a process we refer to as Expansion Mini-Microscopy (ExMM)--is a highly promising alternative method for performing cost-effective, high-resolution imaging of biological samples. With further advancement of the technology, we believe that ExMM will find widespread applications for high-resolution imaging particularly in research and healthcare scenarios in undeveloped countries or remote places.