Phytic Acid: A Novel Dentine Conditioning Agent for Glass Ionomer Cement Restorations: An In Vitro Scanning Electron Microscopic Study.

Background: Various dentin conditioners have been recommended to enhance the bond strength of glass ionomer cement (GIC) to dentin. The purpose of the in vitro study was to determine the efficacy of three dentin conditioners on the microshear bond strength of GIC and the failure patterns of the restoration, as well as the efficacy of removing the smear layer using a scanning electron microscope (SEM). Materials and Methods: Eighty healthy mandibular premolars were cleaned, isolated, and divided into four groups (n = 20). Flat coronal dentinal surfaces were accomplished by removing the occlusal surface of the crowns. Each group received the following treatment: group 1 with 10% polyacrylic acid; group 2 with 10% ethylenediaminetetraacetic acid (EDTA); group 3 with 1% phytic acid; and group 4 with no conditioning (control). High-strength Fuji IX GIC was applied to the dentin, and samples were thermocycled and de-bonded with a crosshead speed of 0.5 mm/min employing a shear force. A stereomicroscope and a SEM were used to examine the dentin surface at magnifications of 2000× and 5000×. One-way analysis of variance (ANOVA), Tukey's post hoc test, and Chi-squared test were used to assess data on microshear bond strength, smear layer removal, and failure modes. Results: The bond strength of group 4 was statistically highly significant (P ≤ 0.001) compared to the other groups. However, the differences between groups 2 and 3 were insignificant. Mixed pattern of failure was the least in group 3 (IP6). In group 3, the SEM photomicrograph revealed open dentinal tubules with complete removal of the smear layer. Conclusion: The results of the present study affirm that phytic acid enhances the bond strength of GIC restorations and removal of smear layer to a level comparable to EDTA as a dentin conditioner.

Is odontogenic keratocyst an endodontic enigma? A rare case report of management of odontogenic keratocyst in anterior mandible.

Odontogenic keratocyst (OKC), a rare, locally aggressive developmental cyst, is found incidentally on dental radiographs, most commonly in the posterior mandible. When it occurs in the periapical region in association with nonresponding teeth to pulp sensibility tests, it is often misdiagnosed as other endodontic lesions such as radicular cyst, lateral periodontal cyst and dentigerous cyst. This case report describes the rare occurrence of OKC in the anterior mandibular region managed successfully with endodontic treatment and re-interventional surgery in a conservative approach. This case report also emphasizes on the importance of histopathological examination of the surgically excised tissue specimens as the clinical, radiographic and histopathological correlations are essential for successful treatment.

Effect of conventional irrigation and photoactivated disinfection on Enterococcus faecalis in root canals: An in vitro study.

AIMS: A study was done to evaluate the antimicrobial efficacy of sodium hypochlorite (NaOCl) and photoactivated disinfection (PAD) on Enterococcus faecalis. SETTINGS AND DESIGN: Random sampling, in-vitro study. SUBJECTS AND METHODS: Access opening and biomechanical preparation were performed on fifty freshly extracted mandibular second premolars. The specimens were sterilized; 15 µm of E. faecalis was inoculated into each canal and incubated at 36°C for 24 h. Later, specimens were randomly divided into two groups of fifty each and following procedures was carried out: (i) conventional irrigation with 2.25% NaOCl (ii) PAD using diode laser, and toluidine blue photosensitizer. Samples were collected from each canal using sterile paper points which were deposited in brain heart infusion broth, and microbiological evaluation was carried out. STATISTICAL ANALYSIS USED: Student's t-test was used to find the significant difference in the reduction of colony forming unit (CFU) between the groups. RESULTS: The mean CFUs of the two groups showed statistically significant difference (P = 0.001). Improved antibacterial efficacy was seen with PAD group compared to conventional NAOCL irrigation. CONCLUSIONS: NaOCl alone was not effective in eliminating E. faecalis completely from the root canals. PAD compared to conventional irrigation showed the best results in removing E. faecalis from root canals.

Nonsurgical management of large periapical lesion in mature and immature teeth using different calcium hydroxide formulations: case series.

This case series evaluates the effectiveness of different calcium hydroxide formulations with various vehicles in management of large periapical lesion in mature and immature teeth. This will help clinicians to make informed judgments about which formulations of calcium hydroxide should be used for specific endodontic procedures.

Comparative evaluation of self-etching primers and phosphoric acid effectiveness on composite to enamel bond: an in vitro study.

AIM: The aim of the present study was to investigate the effectiveness of the one total-etch self-priming adhesive, one two-step self-etching primer adhesive, and one 'all-in-one' self-etching adhesive system on the adhesion of a resin composite to enamel. MATERIALS AND METHODS: Thirty-six freshly extracted human mandibular molars were selected for this study. A fat area about 5 mm in diameter was created on the exposed mesial surface of enamel of each tooth by moist grinding with 320, 420 and 600 grit silicon carbide paper. Twelve teeth were randomly assigned into three groups. In group 1, Adper Easy One (3M ESPE), a one step self-etching primer adhesive was applied and light curing unit for 10 seconds. In group 2, Adper SE Plus, a two-step self-etching primer with bottle A containing the aqueous primer and bottle B containing the acidic adhesive was applied and light cured for 10 seconds. Group 3 (control)-etchant 37% phosphoric acid is applied to the surface for 15 seconds and rinsed with water and air dried and adhesive (single bond 2) is applied to the surface and tube is placed and light cured for 20 seconds. Composite material (Z350) was placed in the tube and light cured for 40 seconds in all the groups. Bond strength testing was done using universal testing machine at the enamel-composite interface. The debonded enamel surface was evaluated in stereomicroscope to assess the cohesive, adhesive or mixed fracture. Data was statistically analyzed by one way analysis of variance (ANOVA). RESULTS: Group 1 performed least among all groups with a mean score of 19.46 MPa. Group 2 had a mean score of 25.67 MPa. Group 3 had a mean score of 27.16 MPa. CONCLUSION: Under the conditions of this in vitro study, the bond strength values of the two-step self-etching primer systems tested were similar to the total-etch. And, one step self-etching primers have lower bond strength compared to the total-etch.

Endodontic treatment of mandibular canine with two roots and two canals.

In majority of cases, mandibular canines have one root and one root canal, although 15% may have two canals. Literature report shows incidence of two-rooted canine as low as 1.7%. This article reports a clinical case of endodontic treatment of mandibular canine with two roots and two canals.

A comparative study of inter-abutment distance of dies made from full arch dual-arch impression trays with those made from full arch stock trays: an in vitro study.

OBJECTIVES: The dual-arch impression technique is convenient in that it makes the required maxillary and mandibular impressions, as well as the inter-occlusal record in one procedure. The accuracy of inter-abutment distance in dies fabricated from dual-arch impression technique remains in question because there is little information available in the literature. MATERIALS AND METHODS: This study was conducted to evaluate the accuracy of inter-abutment distance in dies obtained from full arch dual-arch trays with those obtained from full arch stock metal trays. RESULTS AND CONCLUSION: The metal dual-arch trays showed better accuracy followed by the plastic dual-arch and stock dentulous trays, respectively, though statistically insignificant. The pouring sequence did not have any effect on the inter-abutment distance statistically, though pouring the non-working side of the dual-arch impression first showed better accuracy.