Towards an Action Recognition Framework for Endovascular Surgery.

Objective knowledge about instrument manoeuvres in endovascular surgery is essential for evaluating surgical skills and developing advanced technologies for cathlab routines. To the recent day, endovascular navigation has been exclusively assessed in laboratory scenarios. By contrast, information contained in available fluoroscopy data from clinical cases has been disregarded. In this work, we pioneer a learning-based framework for motion activity recognition in fluoroscopy sequences. The architecture is composed of two networks for instrument segmentation and action recognition. In this preliminary study, we demonstrate feasibility of recognising instrument manoeuvres automatically in our ex vivo datasets.Clinical relevance-The proposed framework contributes to image-based and automated assessment of endovascular tasks. This facilitates robotic control development, surgical education, and smart clinical documentation.

In-Vivo Validation of a Novel Robotic Platform for Endovascular Intervention.

OBJECTIVE: In-vivo validation on animal setting of a pneumatically propelled robot for endovascular intervention, to determine safety and clinical advantage of robotic cannulations compared to manual operation. METHODS: Robotic assistance and image-guided intervention are increasingly used for improving endovascular procedures with enhanced navigation dexterity and accuracy. However, most platforms developed in the past decade still present inherent limitations in terms of altered clinical workflow, counterintuitive human-robot interaction, and a lack of versatility. We have created a versatile, highly integrated platform for robot-assisted endovascular intervention aimed at addressing such limitations, and here we demonstrate its clinical usability through in-vivo animal trials. A detailed in-vivo study on four porcine models conducted with our robotic platform is reported, involving cannulation and balloon angioplasty of five target arteries. RESULTS: The trials showed a 100% success rate, and post-mortem histopathological assessment demonstrated a reduction in the incidence and severity of vessel trauma with robotic navigation versus manual manipulation. CONCLUSION: In-vivo experiments demonstrated that the applicability of our robotic system within the context of this study was well tolerated, with good feasibility, and low risk profile. Comparable results were observed with robotics and manual cannulation, with clinical outcome potentially in favor of robotics. SIGNIFICANCE: This study showed that the proposed robotic platform can potentially improve the execution of endovascular procedures, paving the way for clinical translation.

µRALP and Beyond: Micro-Technologies and Systems for Robot-Assisted Endoscopic Laser Microsurgery.

Laser microsurgery is the current gold standard surgical technique for the treatment of selected diseases in delicate organs such as the larynx. However, the operations require large surgical expertise and dexterity, and face significant limitations imposed by available technology, such as the requirement for direct line of sight to the surgical field, restricted access, and direct manual control of the surgical instruments. To change this status quo, the European project µRALP pioneered research towards a complete redesign of current laser microsurgery systems, focusing on the development of robotic micro-technologies to enable endoscopic operations. This has fostered awareness and interest in this field, which presents a unique set of needs, requirements and constraints, leading to research and technological developments beyond µRALP and its research consortium. This paper reviews the achievements and key contributions of such research, providing an overview of the current state of the art in robot-assisted endoscopic laser microsurgery. The primary target application considered is phonomicrosurgery, which is a representative use case involving highly challenging microsurgical techniques for the treatment of glottic diseases. The paper starts by presenting the motivations and rationale for endoscopic laser microsurgery, which leads to the introduction of robotics as an enabling technology for improved surgical field accessibility, visualization and management. Then, research goals, achievements, and current state of different technologies that can build-up to an effective robotic system for endoscopic laser microsurgery are presented. This includes research in micro-robotic laser steering, flexible robotic endoscopes, augmented imaging, assistive surgeon-robot interfaces, and cognitive surgical systems. Innovations in each of these areas are shown to provide sizable progress towards more precise, safer and higher quality endoscopic laser microsurgeries. Yet, major impact is really expected from the full integration of such individual contributions into a complete clinical surgical robotic system, as illustrated in the end of this paper with a description of preliminary cadaver trials conducted with the integrated µRALP system. Overall, the contribution of this paper lays in outlining the current state of the art and open challenges in the area of robot-assisted endoscopic laser microsurgery, which has important clinical applications even beyond laryngology.

Progress in robotics for combating infectious diseases.

The world was unprepared for the COVID-19 pandemic, and recovery is likely to be a long process. Robots have long been heralded to take on dangerous, dull, and dirty jobs, often in environments that are unsuitable for humans. Could robots be used to fight future pandemics? We review the fundamental requirements for robotics for infectious disease management and outline how robotic technologies can be used in different scenarios, including disease prevention and monitoring, clinical care, laboratory automation, logistics, and maintenance of socioeconomic activities. We also address some of the open challenges for developing advanced robots that are application oriented, reliable, safe, and rapidly deployable when needed. Last, we look at the ethical use of robots and call for globally sustained efforts in order for robots to be ready for future outbreaks.

An MR-Safe Endovascular Robotic Platform: Design, Control, and Ex-Vivo Evaluation.

OBJECTIVE: Cardiovascular diseases are the most common cause of global death. Endovascular interventions, in combination with advanced imaging technologies, are promising approaches for minimally invasive diagnosis and therapy. More recently, teleoperated robotic platforms target improved manipulation accuracy, stabilisation of instruments in the vasculature, and reduction of patient recovery times. However, benefits of recent platforms are undermined by a lack of haptics and residual patient exposure to ionising radiation. The purpose of this research was to design, implement, and evaluate a novel endovascular robotic platform, which accommodates emerging non-ionising magnetic resonance imaging (MRI). METHODS: We proposed a pneumatically actuated MR-safe teleoperation platform to manipulate endovascular instrumentation remotely and to provide operators with haptic feedback for endovascular tasks. The platform task performance was evaluated in an ex vivo cannulation study with clinical experts ( N = 7) under fluoroscopic guidance and haptic assistance on abdominal and thoracic phantoms. RESULTS: The study demonstrated that the robotic dexterity involving pneumatic actuation concepts enabled successful remote cannulation of different vascular anatomies with success rates of 90%-100%. Compared to manual cannulation, slightly lower interaction forces between instrumentation and phantoms were measured for specific tasks. The maximum robotic interaction forces did not exceed 3N. CONCLUSION: This research demonstrates a promising versatile robotic technology for remote manipulation of endovascular instrumentation in MR environments. SIGNIFICANCE: The results pave the way for clinical translation with device deployment to endovascular interventions using non-ionising real-time 3D MR guidance.

Stereo vision-based tracking of soft tissue motion with application to online ablation control in laser microsurgery.

Recent research has revealed that image-based methods can enhance accuracy and safety in laser microsurgery. In this study, non-rigid tracking using surgical stereo imaging and its application to laser ablation is discussed. A recently developed motion estimation framework based on piecewise affine deformation modeling is extended by a mesh refinement step and considering texture information. This compensates for tracking inaccuracies potentially caused by inconsistent feature matches or drift. To facilitate online application of the method, computational load is reduced by concurrent processing and affine-invariant fusion of tracking and refinement results. The residual latency-dependent tracking error is further minimized by Kalman filter-based upsampling, considering a motion model in disparity space. Accuracy is assessed in laparoscopic, beating heart, and laryngeal sequences with challenging conditions, such as partial occlusions and significant deformation. Performance is compared with that of state-of-the-art methods. In addition, the online capability of the method is evaluated by tracking two motion patterns performed by a high-precision parallel-kinematic platform. Related experiments are discussed for tissue substitute and porcine soft tissue in order to compare performances in an ideal scenario and in a setup mimicking clinical conditions. Regarding the soft tissue trial, the tracking error can be significantly reduced from 0.72 mm to below 0.05 mm with mesh refinement. To demonstrate online laser path adaptation during ablation, the non-rigid tracking framework is integrated into a setup consisting of a surgical Er:YAG laser, a three-axis scanning unit, and a low-noise stereo camera. Regardless of the error source, such as laser-to-camera registration, camera calibration, image-based tracking, and scanning latency, the ablation root mean square error is kept below 0.21 mm when the sample moves according to the aforementioned patterns. Final experiments regarding motion-compensated laser ablation of structurally deforming tissue highlight the potential of the method for vision-guided laser surgery.

Comparative study on surface reconstruction accuracy of stereo imaging devices for microsurgery.

PURPOSE: Processing stereoscopic image data is an emerging field. Especially in microsurgery that requires sub-millimeter accuracy, application of stereo-based methods on endoscopic and microscopic scenarios is of major interest. In this context, direct comparison of stereo-based surface reconstruction applied to several camera settings is presented. METHODS: A method for stereo matching is proposed and validated on in-vitro data. Demonstrating suitability for surgical scenarios, this method is applied to two custom-made stereo cameras, a miniaturized, bendable surgical endoscope and an operating microscope. Reconstruction accuracy is assessed on a custom-made reference sample. Subsequent to its fabrication, a coordinate measuring arm is used to acquire ground truth. Next, the sample is positioned by a robot at varying distances to each camera. Surface estimation is performed, while the specimen is localized based on. markers. Finally, the error between estimated surface and ground truth is computed. RESULTS: Sample measurement with the coordinate measuring arm yields reliable ground truth data with a root-mean-square error of 11.2 µm. Overall surface reconstruction with analyzed cameras is quantified by a root-mean-square error of less than 0.18 mm. Microscope setting with the highest magnification yields the most accurate measurement, while the maximum deviation does not exceed 0.5 mm. Custom-made stereo cameras perform similar but with outliers of increased magnitude. Miniaturized, bendable surgical endoscope produces the maximum error of approximately 1.2 mm. CONCLUSIONS: Reconstruction results reveal that microscopic imaging outperforms investigated chip-on-the-tip solutions, i.e., at higher magnification. Nonetheless, custom-made cameras are suitable for application in microsurgery. Although reconstruction with the miniaturized endoscope is more inaccurate, it provides a good trade-off between accuracy, outer dimensions and accessibility to hard-to-reach surgical sites.

Tissue surface information for intraoperative incision planning and focus adjustment in laser surgery.

PURPOSE: Introducing computational methods to laser surgery are an emerging field. Focusing on endoscopic laser interventions, a novel approach is presented to enhance intraoperative incision planning and laser focusing by means of tissue surface information obtained by stereoscopic vision. METHODS: Tissue surface is estimated with stereo-based methods using nonparametric image transforms. Subsequently, laser-to-camera registration is obtained by ablating a pattern on tissue substitutes and performing a principle component analysis for precise laser axis estimation. Furthermore, a virtual laser view is computed utilizing trifocal transfer. Depth-based laser focus adaptation is integrated into a custom experimental laser setup in order to achieve optimal ablation morphology. Experimental validation is conducted on tissue substitutes and ex vivo animal tissue. RESULTS: Laser-to-camera registration gives an error between planning and ablation of less than 0.2 mm. As a result, the laser workspace can accurately be highlighted within the live views and incision planning can directly be performed. Experiments related to laser focus adaptation demonstrate that ablation geometry can be kept almost uniform within a depth range of 7.9 mm, whereas cutting quality significantly decreases when the laser is defocused. CONCLUSIONS: An automatic laser focus adjustment on tissue surfaces based on stereoscopic scene information is feasible and has the potential to become an effective methodology for optimal ablation. Laser-to-camera registration facilitates advanced surgical planning for prospective user interfaces and augmented reality extensions.

Towards intra-operative OCT guidance for automatic head surgery: first experimental results.

In recent years, optical coherence tomography (OCT) has gained increasing attention not only as an imaging device, but also as a guidance system for surgical interventions. In this contribution, we propose OCT as an external high-accuracy guidance system, and present an experimental setup of an OCT combined with a cutting laser. This setup enables not only in situ monitoring, but also automatic, high-accuracy, three-dimensional navigation and processing. Its applicability is evaluated simulating a robotic assisted surgical intervention, including planning, navigation, and processing. First results demonstrate that OCT is suitable as a guidance system, fulfilling accuracy demands of interventions such as the cochlear implant surgery.