RESUMO
Mice are commonly used to study mandibular dynamics due to their similarity in chewing cycle patterns with humans. Adult mice treated unilaterally with botulinum toxin type A (BoNTA) in the masseter exhibit atrophy of this muscle characterized by an increase in the gene expression of atrophy-related molecular markers, and a reduction in both muscle fiber diameter and muscle mass at 14d. However, the impact of this muscle imbalance on the non-treated masticatory muscles remains unexplored. Here, we hypothesize that the unilateral masseter hypofunction leads to molecular and 3D morphometric signs of atrophy of the masseter and its agonist masticatory muscles in adult mice. Twenty-three 8-week-old male BALB/c mice received a single injection of BoNTA in the right masseter, whereas the left masseter received the same volume of saline solution (control side). Animals were euthanized at 2d, 7d, and 14d, and the masticatory muscles were analyzed for mRNA expression. Five heads were harvested at 14d, fixed, stained with a contrast-enhanced agent, and scanned using X-ray microtomography. The three-dimensional morphometric parameters (the volume and thickness) from muscles in situ were obtained. Atrogin-1/MAFbx, MuRF-1, and Myogenin mRNA gene expression were significantly increased at 2 and 7d for both the masseter and temporalis from the BoNTA side. For medial pterygoid, increased mRNA gene expression was found at 7d for Atrogin-1/MAFbx and at 2d-7d for Myogenin. Both the volume and thickness of the masseter, temporalis, and medial pterygoid muscles from the BoNTA side were significantly reduced at 14d. In contrast, the lateral pterygoid from the BoNTA side showed a significant increase in volume at 14d. Therefore, the unilateral hypofunction of the masseter leads to molecular and morphological signs of atrophy in both the BoNTA-injected muscle and its agonistic non-injected masticatory muscles. The generalized effect on the mouse masticatory apparatus when one of its components is intervened suggests the need for more clinical studies to determine the safety of BoNTA usage in clinical dentistry.
Assuntos
Toxinas Botulínicas Tipo A , Músculos da Mastigação , Adulto , Humanos , Camundongos , Masculino , Animais , Miogenina , Músculo Masseter/patologia , Músculo Masseter/fisiologia , Atrofia Muscular/patologia , RNA MensageiroRESUMO
The Miocene was a key time in the evolution of African ecosystems witnessing the origin of the African apes and the isolation of eastern coastal forests through an expanding arid corridor. Until recently, however, Miocene sites from the southeastern regions of the continent were unknown. Here, we report the first Miocene fossil teeth from the shoulders of the Urema Rift in Gorongosa National Park, Mozambique. We provide the first 1) radiometric ages of the Mazamba Formation, 2) reconstructions of paleovegetation in the region based on pedogenic carbonates and fossil wood, and 3) descriptions of fossil teeth. Gorongosa is unique in the East African Rift in combining marine invertebrates, marine vertebrates, reptiles, terrestrial mammals, and fossil woods in coastal paleoenvironments. The Gorongosa fossil sites offer the first evidence of woodlands and forests on the coastal margins of southeastern Africa during the Miocene, and an exceptional assemblage of fossils including new species.
RESUMO
OBJECTIVES: Chimpanzees (Pan troglodytes) possess a relatively generalized molar morphology allowing them to access a wide range of foods. Comparisons of crown and cusp morphology among the four subspecies have suggested relatively large intraspecific variability. Here, we compare molar crown traits and cusp wear of two geographically close populations of Western chimpanzees, P. t. verus, to provide further information on intraspecific dental variability. MATERIALS AND METHODS: Micro-CT reconstructions of high-resolution replicas of first and second molars of two Western chimpanzee populations from Ivory Coast (Taï National Park) and Liberia, respectively were used for this study. First, we analyzed projected tooth and cusp 2D areas as well as the occurrence of cusp six (C6) on lower molars. Second, we quantified the molar cusp wear three-dimensionally to infer how the individual cusps alter with advancing wear. RESULTS: Both populations are similar in their molar crown morphology, except for a higher appearance rate of a C6 in Taï chimpanzees. In Taï chimpanzees, lingual cusps of upper molars and buccal cusps of lower molars possess an advanced wear pattern compared to the remaining cusps, while in Liberian chimpanzees this wear gradient is less pronounced. DISCUSSION: The similar crown morphology between both populations fits with previous descriptions for Western chimpanzees and provides additional data on dental variation within this subspecies. The wear pattern of the Taï chimpanzees are in concordance with their observed tool rather than tooth use to open nuts/seeds, while the Liberian chimpanzees may have consumed hard food items crushed between their molars.
Assuntos
Hominidae , Dente , Animais , Pan troglodytes/anatomia & histologia , Coroa do Dente/diagnóstico por imagem , CoroasRESUMO
Feces are a treasure trove in the study of animal behavior and ecology. Stable carbon and nitrogen isotope analysis allows to assess the dietary niches of elusive primate species and primate breastfeeding behavior. However, some fecal isotope data may unwillingly be biased toward the isotope ratios of undigested plant matter, requiring more consistent sample preparation protocols. We assess the impact of this potential data skew in 114 fecal samples of wild bonobos (Pan paniscus) by measuring the isotope differences (Δ13 C, Δ15 N) between bulk fecal samples containing larger particles (>1 mm) and filtered samples containing only small particles (<1 mm). We assess the influence of fecal carbon and nitrogen content (ΔC:N) and sample donor age (subadult, adult) on the resulting Δ13 C, Δ15 N values (n = 228). Additionally, we measure the isotope ratios in three systematically sieved fecal samples of chimpanzees (Pan troglodytes verus), with particle sizes ranging from 20 µm to 8 mm (n = 30). We found differences in fecal carbon and nitrogen content, with the smaller fecal fraction containing more nitrogen on average. While the Δ13 C values were small and not affected by age or ΔC:N, the Δ15 N values were significantly influenced by fecal ΔC:N, possibly resulting from the differing proportions of undigested plant macroparticles. Significant relationships between carbon stable isotope ratios (δ13 C) values and %C in large fecal fractions of both age groups corroborated this assessment. Δ15 N values were significantly larger in adults than subadults, which should be of concern in isotope studies comparing adult females with infants to assess breastfeeding. We found a random variation of up to 3.0 in δ13 C and 2.0 in nitrogen stable isotope ratios within the chimpanzee fecal samples separated by particle sizes. We show that particle size influences isotope ratios and propose a simple, cost-effective filtration method for primate feces to exclude larger undigested food particles from the analysis, which can easily be adopted by labs worldwide.
Assuntos
Hominidae , Nitrogênio , Feminino , Animais , Isótopos de Nitrogênio/análise , Isótopos de Carbono/análise , Carbono , Pan troglodytes , Pan paniscus , Fezes/química , ViésRESUMO
Any change in the energetic cost of mammalian mastication will affect the net energy gain from foods. Although the energetic efficiency of masticatory effort is fundamental in understanding the evolution of the human masticatory system, nothing is known currently about the associated metabolic costs of chewing different items. Here, using respirometry and electromyography of the masseter muscle, we demonstrate that chewing by human subjects represents a measurable energy sink. Chewing a tasteless odorless gum elevates metabolic rate by 10 to 15% above basal levels. Energy expenditure increases with gum stiffness and is paid for by greater muscle recruitment. For modern humans, it is likely that mastication represents a small part of the daily energy budget. However, for our ancestors, before the onset of cooking and sophisticated food processing methods, the costs must have been relatively high, adding a previously unexplored energetic dimension to the interpretation of hominin dentofacial fossils.
RESUMO
OBJECTIVES: This study aims to examine primate postcanine tooth root surface area (TRSA) in the context of two ecological variables (diet and bite force). We also assess scaling relationships within distinct taxonomic groups and across the order as a whole. MATERIALS AND METHODS: Mandibular postcanine TRSA was measured using a three-dimensional computed tomography (CT) method for catarrhine (N = 27), platyrrhine (N = 21), and strepsirrhine (N = 24) taxa; this represents the first sample of strepsirrhines. Two different body size proxies were used: cranial geometric mean (GM) using nine linear measurements, and literature-derived body mass (BM). RESULTS: TRSA correlated strongly with body size, scaling with positive allometry or isometry across the order as a whole; however, scaling differed significantly between taxa for some teeth. Among Strepsirrhini, molar TRSA relative to GM differed significantly between folivores and pliant-object feeders. Additionally, P4 TRSA relative to BM differentiated folivores from both hard- and pliant-object feeders. Among Cercopithecoidea, P4 TRSA adjusted by GM differed between hard- and pliant-object feeders. DISCUSSION: Dietary signals in TRSA appear primarily driven by high frequency loading experienced by folivores. Stronger and more frequent dietary signals were observed within Strepsirrhini relative to Haplorhini. This may reflect the constraints of orthognathism within the latter, constraining the adaptability of their postcanine teeth. Finally, because of the strong correlation between TRSA and BM for each tooth locus (mean r2 = 0.82), TRSA can be used to predict BM in fossil primates using provided equations.
Assuntos
Strepsirhini , Dente , Animais , Primatas , Raiz Dentária/diagnóstico por imagem , DietaRESUMO
Diet is a driving force in human evolution. Two species of Plio-Pleistocene hominins, Paranthropus robustus and Australopithecus africanus, have derived craniomandibular and dental morphologies which are often interpreted as P. robustus having a more biomechanically challenging diet. While dietary reconstructions based on dental microwear generally support this, they show extensive dietary overlap between species, and craniomandibular and dental biomechanical analyses can yield contradictory results. Using methods from anthropology and engineering (i.e. anthroengineering), we quantified the molar biomechanical performance of these hominins to investigate possible dietary differences between them. Thirty-one lower second molars were 3D printed and used to fracture gelatine blocks, and Bayesian generalized linear models were used to investigate the relationship between species and tooth wear, size and shape, and biomechanical performance. Our results demonstrate that P. robustus required more force and energy to fracture blocks but had a higher force transmission rate. Considering previous dietary reconstructions, we propose three evolutionary scenarios concerning the dietary ecologies of these hominins. These evolutionary scenarios cannot be reached by investigating morphological differences in isolation, but require combining several lines of evidence. This highlights the need for a holistic approach to reconstructing hominin dietary ecology.
RESUMO
Facial orientation (projection and degree of prognathism) and form in hominins is highly variable, likely related to evolutionary modifications of the microscopic process of bone modeling (the simultaneous cellular activities of bone formation and resorption) during ontogeny. However, in anteriorly projected faces such as those of early hominins, little is known about the link between bone modeling and facial developmental patterns. Similarly, these aspects have been infrequently investigated in extant great apes. In this study, quantitative methods were applied to a cross-sectional ontogenetic sample of 33 chimpanzees (Pan troglodytes verus) and 59 modern humans (Homo sapiens) to compare the development of maxillary prognathism to orthognathism at both microscopic and macroscopic (or morphological) scales using surface histology and geometric morphometric techniques. Chimpanzees express on average lower amounts of bone resorption than humans on the maxillary periosteum throughout ontogeny; however, the premaxilla is consistently resorbed from early stages on. The presence of bone resorption in the chimpanzee premaxilla, such as that seen in some early hominins, suggests a more ape-like pattern of maxillary bone modeling in these specimens. However, this shows that similarities in bone modeling patterns can lead to variations in shape, suggesting that other aspects of facial growth (such as modifications of rates and timings of development, as well as sutural growth) also played a crucial role in facial evolution.
Assuntos
Maxila/anatomia & histologia , Pan troglodytes/anatomia & histologia , Prognatismo , Adulto , Envelhecimento , Animais , Criança , Estudos Transversais , Feminino , Humanos , MasculinoRESUMO
Dental wear analyses have been widely used to interpret the dietary ecology in primates. However, it remains unclear to what extent a combination of wear analyses acting at distinct temporal scales can be beneficial in interpreting the tooth use of primates with a high variation in their intraspecific dietary ecology. Here, we combine macroscopic tooth wear (occlusal fingerprint analysis, long-term signals) with microscopic 3D surface textures (short-term signals) exploring the tooth use of a historical western chimpanzee population from northeastern Liberia with no detailed dietary records. We compare our results to previously published tooth wear and feeding data of the extant and continually monitored chimpanzees of TaÑ National Park in Ivory Coast. Macroscopic tooth wear results from molar wear facets of the Liberian population indicate only slightly less wear when compared to the TaÑ population. This suggests similar long-term feeding behavior between both populations. In contrast, 3D surface texture results show that Liberian chimpanzees have many and small microscopic wear facet features that group them with those TaÑ chimpanzees that knowingly died during dry periods. This coincides with historical accounts, which indicate that local tribes poached and butchered the Liberian specimens during dust-rich dry periods. In addition, Liberian females and males differ somewhat in their 3D surface textures, with females having more microscopic peaks, smaller hill and dale areas and slightly rougher wear facet surfaces than males. This suggests a higher consumption of insects in Liberian females compared to males, based on similar 3D surface texture patterns previously reported for TaÑ chimpanzees. Our study opens new options for uncovering details of feeding behaviors of chimpanzees and other living and fossil primates, with macroscopic tooth wear tracing the long-term dietary and environmental history of a single population and microscopic tooth wear addressing short-term changes (e.g. seasonality).
Assuntos
Comportamento Alimentar/fisiologia , Dente Molar/patologia , Pan troglodytes/fisiologia , Desgaste dos Dentes/patologia , Animais , Côte d'Ivoire , Morte , Dieta , Fenômenos Ecológicos e Ambientais , Feminino , Libéria , Masculino , Dente Molar/anatomia & histologia , Reconhecimento Automatizado de Padrão/métodos , Estações do AnoRESUMO
OBJECTIVES: One role of dental pulp is in the upkeep and maintenance of dentine. Under wear, odontoblasts in the pulp deposit tertiary dentine to ensure the sensitive internal dental tissues are not exposed and vulnerable to infection. It follows that there may be an adaptive advantage for increasing molar pulp volume in anthropoid primate taxa that are prone to high levels of wear. The relative volume of dental pulp is therefore predicted to covary with dietary abrasiveness (in the sense of including foods that cause high degrees of wear). MATERIALS AND METHODS: We examined relatively unworn lower second molars in pairs of species of extant hominoids, cebids, and pitheciids that vary in the abrasiveness of their diet (n = 36). Using micro-CT scans, we measured the percent of tooth that is pulp (PTP) as the ratio of pulp volume to that of the total volume of the tooth. RESULTS: We found that in each pair of species, the taxa that consume a more abrasive diet had a significantly higher PTP than the closely related taxa that consume a softer diet. CONCLUSIONS: Our results point to an adaptive mechanism in the molars of taxa that consume abrasive diets and are thus subject to higher levels of wear. Our results provide additional understanding of the relationship between dental pulp and diet and may offer insight into the diet of extinct taxa such as Paranthropus boisei or into the adaptive context of the taurodont molars of Neanderthals.
Assuntos
Polpa Dentária , Dieta/veterinária , Hominidae , Desgaste dos Dentes/patologia , Animais , Antropologia Física , Polpa Dentária/anatomia & histologia , Polpa Dentária/fisiologia , Hominidae/anatomia & histologia , Hominidae/fisiologia , Dente Molar/anatomia & histologia , Dente Molar/fisiologiaRESUMO
Mammalian teeth have to sustain repetitive and high chewing loads without failure. Key to this capability is the periodontal ligament (PDL), a connective tissue containing a collagenous fibre network which connects the tooth roots to the alveolar bone socket and which allows the teeth to move when loaded. It has been suggested that rodent molars under load experience a screw-like downward motion but it remains unclear whether this movement also occurs in primates. Here we use synchroton micro-computed tomography paired with an axial loading setup to investigate the form-function relationship between tooth movement and the morphology of the PDL space in a non-human primate, the mouse lemur (Microcebus murinus). The loading behavior of both mandibular and maxillary molars showed a three-dimensional movement with translational and rotational components, which pushes the tooth into the alveolar socket. Moreover, we found a non-uniform PDL thickness distribution and a gradual increase in volumetric proportion of the periodontal vasculature from cervical to apical. Our results suggest that the PDL morphology may optimize the three-dimensional tooth movement to avoid high stresses under loading.
Assuntos
Dente Molar/fisiologia , Primatas/fisiologia , Animais , Feminino , Humanos , Imageamento Tridimensional/métodos , Camundongos , Ligamento Periodontal/fisiologia , Estresse Mecânico , Síncrotrons , Técnicas de Movimentação Dentária/métodos , Microtomografia por Raio-X/métodosRESUMO
OBJECTIVES: This study compares the ontogenetic bone modeling patterns of the maxilla to the related morphological changes in three human populations to better understand how morphological variability within a species is established during ontogeny at both micro- and macroscopic levels. MATERIALS AND METHODS: The maxillary bones of an ontogenetic sample of 145 subadult and adult individuals from Greenland (Inuit), Western Europe (France, Germany, and Portugal), and South Africa (Khoekhoe and San) were analyzed. Bone formation and resorption were quantified using histological methods to visualize the bone modeling patterns. In parallel, semilandmark geometric morphometric techniques were used on 3D models of the same individuals to capture the morphological changes. Multivariate statistics were applied and shape differences between age groups were visualized through heat maps. RESULTS: The three populations show differences in the degree of shape change acquired during ontogeny, leading to divergences in the developmental trajectories. Only subtle population differences in the bone modeling patterns were found, which were maintained throughout ontogeny. Bone resorption in adults mirrors the pattern found in subadults, but is expressed at lower intensities. DISCUSSION: Our data demonstrate that maxillary morphological differences observed in three geographically distinct human populations are also reflected at the microscopic scale. However, we suggest that these differences are mostly driven by changes in rates and timings of the cellular activities, as only slight discrepancies in the location of bone resorption could be observed. The shared general bone modeling pattern is likely characteristic of all Homo sapiens, and can be observed throughout ontogeny.
Assuntos
Remodelação Óssea/fisiologia , Maxila/anatomia & histologia , Grupos Raciais/estatística & dados numéricos , Adulto , Antropologia Física , Humanos , Maxila/crescimento & desenvolvimentoRESUMO
Although Neandertals are the best-known fossil hominins, the tempo and evolutionary processes in their lineage are strongly debated. This is in part due to the scarcity of the fossil record, in particular before the marine isotopic stage (MIS) 5. In 2010, a partial hominin mandible was discovered at the Middle Paleolithic site of Payre (France) in a layer that is dated to the end of MIS 8/beginning of MIS 7, a time period for which very few fossils are known in Europe. The Payre 15 mandible retains the complete symphyseal region and right lateral corpus with heavily worn P4, M1, and M2 in situ. Taphonomic modifications in the form of three notches suggest that this individual was chewed by a carnivore. We provide here the first detailed description of this specimen and a comparative analysis that includes morphological features, linear mandibular dimensions, an elliptic Fourier analysis of the symphysis, and a morphometric analysis of the M1 roots (based on segmented CT scan data). Our comparative sample encompasses European Middle and Upper Pleistocene specimens attributed to Homo heidelbergensis and Homo neanderthalensis, Upper Pleistocene Homo sapiens, and Holocene Homo sapiens. The Payre 15 mandible shows a combination of primitive and Neandertal-like features, with a receding symphyseal profile without any element of the mentum osseum, a posterior location of the mental foramen and lateral prominence. Its mandibular body is tall and thick anteriorly. Payre 15 has mesotaurodont M1 roots and a three-rooted M2. By its dimensions and combination of features, Payre 15 aligns better with Middle Pleistocene European hominins than with MIS 6-3 Neandertals. Noteworthy, it falls well within the range of variation of the Sima de los Huesos sample. Our results underscore that the total pattern of Neandertal-derived morphology was not achieved at the beginning of the MIS 7 and suggest a low level of mandibular diachronic changes for the period MIS 11-7.
Assuntos
Hominidae/anatomia & histologia , Mandíbula/anatomia & histologia , Animais , Evolução Biológica , Fósseis , França , Homem de Neandertal/anatomia & histologiaRESUMO
The masticatory system is a complex and highly organized group of structures, including craniofacial bones (maxillae and mandible), muscles, teeth, joints, and neurovascular elements. While the musculoskeletal structures of the head and neck are known to have a different embryonic origin, morphology, biomechanical demands, and biochemical characteristics than the trunk and limbs, their particular molecular basis and cell biology have been much less explored. In the last decade, the concept of muscle-bone crosstalk has emerged, comprising both the loads generated during muscle contraction and a biochemical component through soluble molecules. Bone cells embedded in the mineralized tissue respond to the biomechanical input by releasing molecular factors that impact the homeostasis of the attaching skeletal muscle. In the same way, muscle-derived factors act as soluble signals that modulate the remodeling process of the underlying bones. This concept of muscle-bone crosstalk at a molecular level is particularly interesting in the mandible, due to its tight anatomical relationship with one of the biggest and strongest masticatory muscles, the masseter. However, despite the close physical and physiological interaction of both tissues for proper functioning, this topic has been poorly addressed. Here we present one of the most detailed reviews of the literature to date regarding the biomechanical and biochemical interaction between muscles and bones of the masticatory system, both during development and in physiological or pathological remodeling processes. Evidence related to how masticatory function shapes the craniofacial bones is discussed, and a proposal presented that the masticatory muscles and craniofacial bones serve as secretory tissues. We furthermore discuss our current findings of myokines-release from masseter muscle in physiological conditions, during functional adaptation or pathology, and their putative role as bone-modulators in the craniofacial system. Finally, we address the physiological implications of the crosstalk between muscles and bones in the masticatory system, analyzing pathologies or clinical procedures in which the alteration of one of them affects the homeostasis of the other. Unveiling the mechanisms of muscle-bone crosstalk in the masticatory system opens broad possibilities for understanding and treating temporomandibular disorders, which severely impair the quality of life, with a high cost for diagnosis and management.
Assuntos
Osso e Ossos/fisiologia , Músculos da Mastigação/fisiologia , Sistema Estomatognático/fisiologia , Animais , Fenômenos Biomecânicos , Humanos , Mandíbula/fisiologia , Maxila/fisiologiaAssuntos
Fósseis , Dente Molar/anatomia & histologia , Povo Asiático , Humanos , Mandíbula , FenótipoRESUMO
Extrinsic fibers (EFs) are a type of penetrating collagenous fiber, closely related to the periodontal ligament, which help anchor soft tissue into bone. These fibers are associated with muscle attachment sites (entheses). Their size and grouping patterns are thought to be indicative of the loading history of the muscle. EFs are of particular significance in anthropology as potential tools for the reconstruction of behavior from skeletal remains and, specifically, entheses. In this study, we used a mouse model to experimentally test how activity level alters the morphology of EF insertion sites on the bone surface of a fibrocartilaginous enthesis, the biceps brachii insertion. Further, we adapted surface metrological techniques from studies of dental wear to perform automated, quantitative and non-destructive analysis of bone surface histology. Our results show that experimentally increased activity had no significant effect on the quantity or density of EF insertions at the enthesis, nor on the size of those insertions. Although EF presence does indicate muscle attachment, activity did not have an observable effect on EF morphology.
Assuntos
Osso e Ossos/anatomia & histologia , Ligamentos/anatomia & histologia , Músculo Esquelético/anatomia & histologia , Animais , Osso e Ossos/fisiologia , Ligamentos/fisiologia , Camundongos , Músculo Esquelético/fisiologiaRESUMO
OBJECTIVES: Gorilla diets are characterized by large amounts of fruit and tough fibrous plant material. Hard-object feeding is not generally associated with this genus as the high crests on their molar teeth would be at risk of damage from the mechanically challenging woody endocarp. This study aims to demonstrate that at least one population of western lowland gorillas are seasonal hard-object feeders, orally processing the seeds of Coula edulis. MATERIALS AND METHODS: Feeding behavior of habituated western lowland gorillas and phenology of fruiting trees was observed over a 4-year period to determine the extent they exploited the seeds of C. edulis. Additionally, the endocarps of C. edulis were subjected to testing to determine their mechanical properties. RESULTS: Our results demonstrate that during the fruiting season (January, February, and December) gorillas consistently opened the seeds of C. edulis using their postcanine dentition. The protective endocarp is composed of a very stiff material, presenting a substantial mechanical challenge to a gorilla. However, the high ratio between elastic modulus and toughness will facilitate brittle, cataclysmic fracture of the seed shell given a high enough load. DISCUSSION: Although a rich energy source, C. edulis likely tax gorilla dentitions to their upper limit. The rarity of such behavior at sites where it could be observed may indicate a degree of social learning or culture driving its occurrence. This shows a greater breadth of gorilla diets than previously described and suggests gorillas may be a useful model for interpreting the dietary mechanics that necessitated robust craniodental morphology in australopiths.
Assuntos
Comportamento Alimentar , Gorilla gorilla/fisiologia , Mastigação , Olacaceae , Sementes , Animais , Dieta , Feminino , MasculinoRESUMO
Recently, ambient occlusion, quantified through portion de ciel visible (PCV) was introduced as a method for quantifying dental morphological wear resistance and reconstructing diet in mammals. Despite being used to reconstruct diet and investigate the relationship between dental form and function, no rigorous analysis has investigated the correlation between PCV and diet. Using a sample of platyrrhine and prosimians M2s, we show average PCV was significantly different between most dietary groups. In prosimian, insectivores had the lowest PCV, followed by folivores, omnivores, frugivores, and finally hard-object feeders. In platyrrhines, omnivores had the lowest average PCV, followed by folivores, frugivores, and finally hard-object feeders. PCV was correlated to two topographic variables (Dirichlet normal energy, DNE, and relief index, RFI) but uncorrelated to three others (orientation patch count rotated, OPCR, tooth surface area, and tooth size). The OPCR values here differed greatly from previously published values using the same sample, showing how differences in data acquisition (i.e., using 2.5D vs. 3D surfaces) can lead to drastic differences in results. Compared to other popular topographic variables, PCV performed as well or better at predicting diet in these groups, and when combined with a metric for size, the percent of successful dietary classifications reached 90%. Further, using an ontogenetic series of hominin (Paranthropus robustus) M2s, we show that PCV correlates well with probability of wear, with PCV values being higher on the portions of the occlusal surface that experience more wear (e.g., cusps and crest tips, wear facets) than the portions of the tooth that experience less. This relationship is strongest once wear facets have begun to form on the occlusal surface. These results highlight the usefulness of PCV in quantifying morphological wear resistance and predicting diet in mammals.
Assuntos
Resistência à Doença , Platirrinos/fisiologia , Strepsirhini/fisiologia , Dente/anatomia & histologia , Animais , Comportamento Animal , Oclusão Dentária , Dieta , Comportamento Alimentar , Platirrinos/anatomia & histologia , Strepsirhini/anatomia & histologia , Dente/fisiologia , Desgaste dos DentesRESUMO
Dental topography is a widely used method for quantifying dental morphology and inferring dietary ecology in animals. Differences in methodology have brought into question the comparability of different studies. Using primate mandibular second molars, we investigated the effects of mesh preparation parameters smoothing, cropping, and triangle count/mesh resolution (herein, resolution) on six topographic variables (Dirichlet normal energy, DNE; orientation patch count rotated, OPCR; relief index, RFI; ambient occlusion, portion de ciel visible, PCV; enamel surface area, SA; tooth size) to determine the effects of smoothing, cropping, and triangle count/resolution on topographic values and the relationship between these values and diet. All topographic metrics are sensitive to smoothing, cropping method, and triangle count/resolution. In general, smoothing decreased DNE, OPCR, RFI, and SA, increased PCV, and had no predictable effect on tooth size. Relative to the basin cut off (BCO) cropping method, the entire enamel cap (EEC) method increased RFI, SA, and size, and had no predictable effect on DNE and OPCR. Smoothing and cropping affected DNE/OPCR and surfaces with low triangle counts more than other metrics and surfaces with high triangle counts. There was a positive correlation between DNE/OPCR and triangle count/resolution, and the rate of increase was weakly correlated to diet. PCV tended to converge or decrease with increases in triangle count/resolution, and RFI, SA, and size converged. Finally, there appears to be no optimal triangle count or resolution for predicting diet from this sample, and constant triangle count appeared to perform better than constant resolution for predicting diet.