Efficient carbene transfer reactivity mediated by Fe(II) complexes supported by bulky alkoxides.

Herein we describe the stoichiometric and catalytic carbene-transfer reactivity of iron(II) alkoxide complexes with iodonium ylide precursors. Treatment of PhIC(CO2Me)2 with styrene in the presence of catalytic amounts of several different Fe(OR)2(THF)2 precursors results in efficient cyclopropanation for a variety of styrenes. Computational and reactivity studies suggest a novel remote metallocarbene/vinyl radical intermediate, Fe(OR)2(κ2-(OC(OMe))2C), which could be responsible for the reactive nature of the catalyst.

Aziridination Reactivity of a Manganese(II) Complex with a Bulky Chelating Bis(Alkoxide) Ligand.

Treatment of Mn(N(SiMe3)2)2(THF)2 with bulky chelating bis(alkoxide) ligand [1,1':4',1''-terphenyl]-2,2''-diylbis(diphenylmethanol) (H2[O-terphenyl-O]Ph) formed a seesaw manganese(II) complex Mn[O-terphenyl-O]Ph(THF)2, characterized by structural, spectroscopic, magnetic, and analytical methods. The reactivity of Mn[O-terphenyl-O]Ph(THF)2 with various nitrene precursors was investigated. No reaction was observed between Mn[O-terphenyl-O]Ph(THF)2 and aryl azides. In contrast, the treatment of Mn[O-terphenyl-O]Ph(THF)2 with iminoiodinane PhINTs (Ts = p-toluenesulfonyl) was consistent with the formation of a metal-nitrene complex. In the presence of styrene, the reaction led to the formation of aziridine. Combining varying ratios of styrene and PhINTs in different solvents with 10 mol% of Mn[O-terphenyl-O]Ph(THF)2 at room temperature produced 2-phenylaziridine in up to a 79% yield. Exploration of the reactivity of Mn[O-terphenyl-O]Ph(THF)2 with various olefins revealed (1) moderate aziridination yields for p-substituted styrenes, irrespective of the electronic nature of the substituent; (2) moderate yield for 1,1'-disubstituted α-methylstyrene; (3) no aziridination for aliphatic α-olefins; (4) complex product mixtures for the ß-substituted styrenes. DFT calculations suggest that iminoiodinane is oxidatively added upon binding to Mn, and the resulting formal imido intermediate has a high-spin Mn(III) center antiferromagnetically coupled to an imidyl radical. This imidyl radical reacts with styrene to form a sextet intermediate that readily reductively eliminates the formation of a sextet Mn(II) aziridine complex.

Catalytic synthesis of azoarenes via metal-mediated nitrene coupling.

Various valuable properties of azoarenes ("azo dyes"), including their vivid colors and their facile cis-trans photoisomerization, lead to their wide use in the chemical industry. As a result, ∼700 000 metric tons of azo dyes are produced each year. Most currently utilized synthetic methods towards azoarenes involve harsh reaction conditions and/or toxic reagents in stoichiometric amounts, which may affect selectivity and produce significant amounts of waste. An efficient alternative method towards this functional group includes transition metal catalyzed nitrene coupling. This method is generally more sustainable compared with most stoichiometric methods as it uses only catalytic amounts of co-reactants (metal catalysts), requires easily synthesizable organoazide precursors, and forms only dinitrogen as a by-product of catalysis. During the last decade, several catalytic systems were reported, and their reactivity was investigated. This perspective article will review these systems, focusing on various nitrene coupling mechanisms, and the substrate scope for each system. Particular attention will be devoted to the iron-alkoxide catalytic systems investigated in the PI's laboratory. The design and structural features of several generations of iron bis(alkoxide) complexes will be discussed, followed by the structure-activity studies of these catalysts in nitrene homo- and heterocoupling.

Synthesis, electronic structures, and reactivity of mononuclear and dinuclear low-valent molybdenum complexes in iminopyridine and bis(imino)pyridine ligand environments.

Molybdenum in redox non-innocent ligand environments features prominently in biological inorganic systems. While Holm and coworkers, along with many other researchers, have thoroughly investigated formally high-oxidation-state molybdenum (Mo(IV)-Mo(VI)) ligated by dithiolenes, less is known about molybdenum in other formal oxidation states and/or different redox-active ligand environments. This work focuses on the investigation of low-valent molybdenum in four different redox non-innocent nitrogen ligand type environments (mononucleating and dinucleating iminopyridine, mononucleating and dinucleating bis(imino)pyridine). The reaction of iminopyridine N-(2,6-diisopropylphenyl)-1-(pyridin-2-yl)methanimine (L1) with Mo(CO)3(NCMe)3 produced Mo(L1)(CO)3(NCMe). Mo(L1)(CO)3(NCMe) undergoes transformation to Mo(L1)(CO)4 upon treatment with CS2 or prolonged stirring in dichloromethane. The reaction of the open-chain dinucleating bis(iminopyridine) ligand N,N'-(2,7-di-tert-butyl-9,9-dimethyl-9H-xanthene-4,5-diyl)bis(1-(pyridin-2-yl)methanimine) (L2) similarly produced an hexacarbonyl complex Mo2(L2)(CO)6(NCMe)2 which also underwent transformation to the octacarbonyl Mo2(L2)(CO)8. Both complexes featured anti-parallel geometry of the chelating units. The oxidation of Mo(L1)(CO)3(NCMe) with I2 resulted in Mo(L1)(CO)3I2. The reaction of mononucleating potentially tridentate bis(imino)pyridine ligand (L3) (N-mesityl-1-(6-((E)-(mesitylimino)methyl)pyridin-2-yl)methanimine) with both Mo(CO)3(NCMe)3 and Mo(CO)4(NCMe)2 produced complexes Mo(L3)(CO)3(NCMe) and Mo(L3)(CO)4 in which L3 was coordinated in a bidentate fashion, with one imino sidearm unbound. The reaction of dinucleating macrocyclic di(bis(imino)pyridine) analogue (L4) led to the similar chemistry of Mo2(L4)(CO)6(NCMe)2 and Mo2(L4)(CO)8 complexes. Treatment of Mo(L3)(CO)3(NCMe) with I2 formed a mono(carbonyl) complex Mo(L3)(CO)I2 in which molybdenum was formally oxidized and L3 underwent coordination mode change to tridentate. The electronic structures of formally Mo(0) complexes in iminopyridine and bis(imino)pyridine ligand environments were investigated by density functional theory calculations.

Synthesis and structure of a new bulky bis-(alkoxide) ligand on a terphenyl platform.

A new sterically bulky chelating bis-(alkoxide) ligand 3,3'-([1,1':4',1''-terphen-yl]-2,2''-di-yl)bis-(2,2,4,4-tetra-methyl-pentan-3-ol), (H2[OO]tBu), was prepared in a two-step process as the di-chloro-methane monosolvate, C36H50O2·CH2Cl2. The first step is a Suzuki-Miyaura coupling reaction between 2-bromo-phenyl-boronic acid and 1,4-di-iodo-benzene. The resulting 2,2''-di-bromo-1,1':4',1''-terphenyl was reacted with t BuLi and hexa-methyl-acetone to obtain the desired product. The crystal structure of H2[OO]tBu revealed an anti conformation of the [CPh2(OH)] fragments relative to the central phenyl. Furthermore, the hydroxyl groups point away from each other. Likely because of this anti-anti conformation, the attempts to synthesize first-row transition-metal complexes with H2[OO]tBu were not successful.

Synthesis and Cu(I)/Mo(VI) Reactivity of a Bifunctional Heterodinucleating Ligand on a Xanthene Platform.

In an effort to probe the feasibility of a model of Mo-Cu CODH (CODH = carbon monoxide dehydrogenase) lacking a bridging sulfido group, the new heterodinucleating ligand LH2 was designed and its Cu(I)/Mo(VI) reactivity was investigated. LH2 ((E)-3-(((5-(bis(pyridin-2-ylmethyl)amino)-2,7-di-tert-butyl-9,9-dimethyl-9H-xanthen-4-yl)imino)methyl)benzene-1,2-diol) features two different chelating positions bridged by a xanthene linker: bis(pyridyl)amine for Cu(I) and catecholate for Mo(VI). LH2 was synthesized via the initial protection of one of the amine positions, followed by two consecutive alkylations of the second position, deprotection, and condensation to attach the catechol functionality. LH2 was found to exhibit dynamic cooperativity between two reactive sites mediated by H-bonding of the catechol protons. In the free ligand, catechol protons exhibit H-bonding with imine (intramolecular) and with pyridine (intermolecular in the solid state). The reaction of LH2 with [Cu(NCMe)4]+ led to the tetradentate coordination of Cu(I) via all nitrogen donors of the ligand, including the imine. Cu(I) complexes were characterized by multinuclear NMR spectroscopy, high-resolution mass spectrometry (HRMS), X-ray crystallography, and DFT calculations. Cu(I) coordination to the imine disrupted H-bonding and caused rotation away from the catechol arm. The reaction of the Cu(I) complex [Cu(LH2)]+ with a variety of monodentate ligands X (PPh3, Cl-, SCN-, CN-) released the metal from coordination to the imine, thereby restoring imine H-bonding with the catechol proton. The second catechol proton engages in H-bonding with Cu-X (X = Cl, CN, SCN), which can be intermolecular (XRD) or intramolecular (DFT). The reaction of LH2 with molybdate [MoO4]2- led to incorporation of [MoVIO3] at the catecholate position, producing [MoO3(L)]2-. Similarly, the reaction of [Cu(LH2)]+ with [MoO4]2- formed the heterodinuclear complex [CuMoO3(L)]-. Both complexes were characterized by multinuclear NMR, UV-vis, and HRMS. HRMS in both cases confirmed the constitution of the complexes, containing molecular ions with the expected isotopic distribution.

Synthesis of Chromium(II) Complexes with Chelating Bis(alkoxide) Ligand and Their Reactions with Organoazides and Diazoalkanes.

Synthesis of new chromium(II) complexes with chelating bis(alkoxide) ligand [OO]Ph (H2[OO]Ph = [1,1':4',1''-terphenyl]-2,2''-diylbis(diphenylmethanol)) and their subsequent reactivity in the context of catalytic production of carbodiimides from azides and isocyanides are described. Two different Cr(II) complexes are obtained, as a function of the crystallization solvent: mononuclear Cr[OO]Ph(THF)2 (in toluene/THF, THF = tetrahydrofuran) and dinuclear Cr2([OO]Ph)2 (in CH2Cl2/THF). The electronic structure and bonding in Cr[OO]Ph(THF)2 were probed by density functional theory calculations. Isolated Cr2([OO]Ph)2 undergoes facile reaction with 4-MeC6H4N3, 4-MeOC6H4N3, or 3,5-Me2C6H3N3 to yield diamagnetic Cr(VI) bis(imido) complexes; a structure of Cr[OO]Ph(N(4-MeC6H4))2 was confirmed by X-ray crystallography. The reaction of Cr2([OO]Ph)2 with bulkier azides N3R (MesN3, AdN3) forms paramagnetic products, formulated as Cr[OO]Ph(NR). The attempted formation of a Cr-alkylidene complex (using N2CPh2) instead forms chromium(VI) bis(diphenylmethylenehydrazido) complex Cr[OO]Ph(NNCPh2)2. Catalytic formation of carbodiimides was investigated for the azide/isocyanide mixtures containing various aryl azides and isocyanides. The formation of carbodiimides was found to depend on the nature of organoazide: whereas bulky mesitylazide led to the formation of carbodiimides with all isocyanides, no carbodiimide formation was observed for 3,5-dimethylphenylazide or 4-methylphenylazide. Treatment of Cr2([OO]Ph)2 or H2[OO]Ph with NO+ leads to the formation of [1,2-b]-dihydroindenofluorene, likely obtained via carbocation-mediated cyclization of the ligand.

Tying the alkoxides together: an iron complex of a new chelating bulky bis(alkoxide) demonstrates selectivity for coupling of non-bulky aryl nitrenes.

New chelating bis(alkoxide) ligand H2[OO]Ph and its iron(ii) complex Fe[OO]Ph(THF)2 are described. The coordination of the ligand to the metal center is reminiscent of the coordination of two monodentate alkoxides in previously reported Fe(OR)2(THF)2 species. Fe[OO]Ph(THF)2 catalyzes selective and efficient dimerization of non-bulky aryl nitrenes to yield the corresponding azoarenes.

PyGlobal: A toolkit for automated compilation of DFT-based descriptors.

Density Functional Theory (DFT)-based Global reactivity descriptor calculations have emerged as powerful tools for studying the reactivity, selectivity, and stability of chemical and biological systems. A Python-based module, PyGlobal has been developed for systematically parsing a typical Gaussian outfile and extracting the relevant energies of the HOMO and LUMO. Corresponding global reactivity descriptors are further calculated and the data is saved into a spreadsheet compatible with applications like Microsoft Excel and LibreOffice. The efficiency of the module has been accounted by measuring the time interval for randomly selected Gaussian outfiles for 1000 molecules. © 2016 Wiley Periodicals, Inc.

Exploring isoxazole and carboxamide derivatives as potential non-nucleoside reverse transcriptase inhibitors.

Nonnucleoside reverse transciptase inhibitors (NNRTI) are a class of drug molecules with a specific target of HIV-1 reverse transcriptase (RT). In the present work, we evaluated a set of selected oxazole and carboxamide derivatives to identify potential pharmacophoric features using molecular docking approach. The docking approach employed has been validated by enrichment factor calculation at top 1% (EF1%). It shows a considerable improvement in EF1%value compared to earlier reported study carried out on specific dataset of ligands and decoys for RT, in the directory of useful decoys (DUD). The carboxamide derivatives show better activity as NNRT inhibitors than oxazole derivatives. From this study, four pharmacophoric groups including a triazine ring, an aniline substituent, a benzyl amide moiety and a trimethylphenoxy substituent have been recognized and used for designing new NNRT inhibitors. Newly designed molecules show significant enhancement in docking scores over the native ligand, parent and other training set molecules. In addition, some functional groups have also been identified to assist in improving the activity of these pharmacophores. Thus a nitrile group, an amide and fluoro substitution turn out to be an important requisite for NNRT potential inhibitors.