Estimating the Thumb Rotation Angle by Using a Tablet Device With a Posture Estimation Artificial Intelligence Model.

MediaPipe Hand (MediaPipe) is an artificial intelligence (AI)-based pose estimation library. In this study, MediaPipe was combined with four machine learning (ML) models to estimate the rotation angle of the thumb. Videos of the right hands of 15 healthy volunteers were recorded and processed into 9000 images. The rotation angle of the thumb (defined as angle θ from the palmar plane, which is defined as 0°) was measured using an angle measuring device, expressed in a radian system. Angle θ was then estimated by the ML model by using parameters calculated from the hand coordinates detected by MediaPipe. The linear regression model showed a root mean square error (RMSE) of 12.23, a mean absolute error (MAE) of 9.9, and a correlation coefficient of 0.91. The ElasticNet model showed an RMSE of 12.23, an MAE of 9.95, and a correlation coefficient of 0.91; the support vector machine (SVM) model showed an RMSE of 4.7, an MAE of 2.5, and a correlation coefficient of 0.99. The LightGBM model achieved high values: an RMSE of 4.58, an MAE of 2.62, and a correlation coefficient of 0.99. Based on these findings, we concluded that the thumb rotation angle can be estimated with high accuracy by combining MediaPipe and ML.

Estimation of Shoulder Joint Rotation Angle Using Tablet Device and Pose Estimation Artificial Intelligence Model.

Traditionally, angle measurements have been performed using a goniometer, but the complex motion of shoulder movement has made these measurements intricate. The angle of rotation of the shoulder is particularly difficult to measure from an upright position because of the complicated base and moving axes. In this study, we attempted to estimate the shoulder joint internal/external rotation angle using the combination of pose estimation artificial intelligence (AI) and a machine learning model. Videos of the right shoulder of 10 healthy volunteers (10 males, mean age 37.7 years, mean height 168.3 cm, mean weight 72.7 kg, mean BMI 25.6) were recorded and processed into 10,608 images. Parameters were created using the coordinates measured from the posture estimation AI, and these were used to train the machine learning model. The measured values from the smartphone's angle device were used as the true values to create a machine learning model. When measuring the parameters at each angle, we compared the performance of the machine learning model using both linear regression and Light GBM. When the pose estimation AI was trained using linear regression, a correlation coefficient of 0.971 was achieved, with a mean absolute error (MAE) of 5.778. When trained with Light GBM, the correlation coefficient was 0.999 and the MAE was 0.945. This method enables the estimation of internal and external rotation angles from a direct-facing position. This approach is considered to be valuable for analyzing motor movements during sports and rehabilitation.

Re-tear after arthroscopic rotator cuff tear surgery: risk analysis using machine learning.

BACKGROUND: Postoperative rotator cuff retear after arthroscopic rotator cuff repair (ARCR) is still a major problem. Various risk factors such as age, gender, and tear size have been reported. Recently, magnetic resonance imaging-based stump classification was reported as an index of rotator cuff fragility. Although stump type 3 is reported to have a high retear rate, there are few reports on the risk of postoperative retear based on this classification. Machine learning (ML), an artificial intelligence technique, allows for more flexible predictive models than conventional statistical methods and has been applied to predict clinical outcomes. In this study, we used ML to predict postoperative retear risk after ARCR. METHODS: The retrospective case-control study included 353 patients who underwent surgical treatment for complete rotator cuff tear using the suture-bridge technique. Patients who initially presented with retears and traumatic tears were excluded. In study participants, after the initial tear repair, rotator cuff retears were diagnosed by magnetic resonance imaging; Sugaya classification types IV and V were defined as re-tears. Age, gender, stump classification, tear size, Goutallier classification, presence of diabetes, and hyperlipidemia were used for ML parameters to predict the risk of retear. Using Python's Scikit-learn as an ML library, five different AI models (logistic regression, random forest, AdaBoost, CatBoost, LightGBM) were trained on the existing data, and the prediction models were applied to the test dataset. The performance of these ML models was measured by the area under the receiver operating characteristic curve. Additionally, key features affecting retear were evaluated. RESULTS: The area under the receiver operating characteristic curve for logistic regression was 0.78, random forest 0.82, AdaBoost 0.78, CatBoost 0.83, and LightGBM 0.87, respectively for each model. LightGBM showed the highest score. The important factors for model prediction were age, stump classification, and tear size. CONCLUSIONS: The ML classifier model predicted retears after ARCR with high accuracy, and the AI model showed that the most important characteristics affecting retears were age and imaging findings, including stump classification. This model may be able to predict postoperative rotator cuff retears based on clinical features.

Intra-articular site-specific distribution of advanced glycation end products in the shoulder of patients with diabetes mellitus having rotator cuff tears.

BACKGROUND: Advanced glycation end products (AGEs) are compounds formed due to aging and diabetes mellitus (DM). They activate NADPH oxidase (NOX) by binding to their receptors, thereby increasing the production of reactive oxygen species (ROS), which cause oxidative stress. In this study, we investigated the effects of AGEs on the tissues of the shoulder joint (such as rotator cuff synovium, and capsule) in patients with DM having rotator cuff tears. METHODS: This study included eight patients with DM who underwent surgical treatment for rotator cuff tears with contracture. The rotator cuff, synovium, and joint capsule were harvested at the time of surgery and evaluated by hematoxylin-eosin staining. Furthermore, immunostaining was used for evaluating AGEs and receptor for AGEs (RAGE), cell activity, ROS, and apoptosis. Quantitative real-time polymerase chain reaction (qPCR) was employed for the cellular evaluation of NOX, interleukins, RAGE, and collagen. RESULTS: The AGEs and RAGE staining as well as the ratio of ROS and apoptosis were in the following order: rotator cuff > joint capsule > synovium. In contrast, the cellular activity was significantly higher in the synovium than in the other regions. The type I collagen expression (as shown by qPCR) as well as the RAGE and NOX expressions were as follows: rotator cuff > joint capsule > synovium. Conversely, the expression of inflammatory cytokines (i.e., IL-6 and IL-1ß) was higher in the synovium than in the other regions. CONCLUSIONS: Our study is among the first to evaluate the effects of AGEs on each tissue of the shoulder joint in patients with DM having rotator cuff tears and contractures. The accumulation of AGEs in each tissue of the shoulder joint could reveal the locations affected by DM, which can lead to a better understanding of the pathophysiology of DM-related shoulder diseases.

Measurement of Shoulder Abduction Angle with Posture Estimation Artificial Intelligence Model.

Substantial advancements in markerless motion capture accuracy exist, but discrepancies persist when measuring joint angles compared to those taken with a goniometer. This study integrates machine learning techniques with markerless motion capture, with an aim to enhance this accuracy. Two artificial intelligence-based libraries-MediaPipe and LightGBM-were employed in executing markerless motion capture and shoulder abduction angle estimation. The motion of ten healthy volunteers was captured using smartphone cameras with right shoulder abduction angles ranging from 10° to 160°. The cameras were set diagonally at 45°, 30°, 15°, 0°, -15°, or -30° relative to the participant situated at a distance of 3 m. To estimate the abduction angle, machine learning models were developed considering the angle data from the goniometer as the ground truth. The model performance was evaluated using the coefficient of determination R2 and mean absolute percentage error, which were 0.988 and 1.539%, respectively, for the trained model. This approach could estimate the shoulder abduction angle, even if the camera was positioned diagonally with respect to the object. Thus, the proposed models can be utilized for the real-time estimation of shoulder motion during rehabilitation or sports motion.

Elicitation of Inhibitory Effects for AGE-Induced Oxidative Stress in Rotator Cuff-Derived Cells by Apocynin.

Advanced glycation end-products (AGEs) play a critical supportive role during musculoskeletal disorders via glycosylation and oxidative stress. Though apocynin, identified as a potent and selective inhibitor of NADPH oxidase, has been reported to be involved in pathogen-induced reactive oxygen species (ROS), its role in age-related rotator cuff degeneration has not been well clarified. Therefore, this study aims to evaluate the in vitro effects of apocynin on human rotator cuff-derived cells. Twelve patients with rotator cuff tears (RCTs) participated in the study. Supraspinatus tendons from patients with RCTs were collected and cultured. After the preparation of RC-derived cells, they were divided into four groups (control group, control + apocynin group, AGEs group, AGEs + apocynin group), and gene marker expression, cell viability, and intracellular ROS production were evaluated. The gene expression of NOX, IL-6, and the receptor for AGEs (RAGE) was significantly decreased by apocynin. We also examined the effect of apocynin in vitro. The results showed that ROS induction and increasing apoptotic cells after treatment of AGEs were significantly decreased, and cell viability increased considerably. These results suggest that apocynin can effectively reduce AGE-induced oxidative stress by inhibiting NOX activation. Thus, apocynin is a potential prodrug in preventing degenerative changes of the rotor cuff.

Dynamic Analysis of the Coracohumeral Ligament Using Ultra-Sonography in Shoulder Contracture.

The coracohumeral ligament (CHL) is related to the range of motion of the shoulder joint. The evaluation of the CHL using ultrasonography (US) has been reported on the elastic modulus and thickness of the CHL, but no dynamic evaluation method has been established. We aimed to quantify the movement of the CHL by applying Particle Image Velocimetry (PIV), a technique used in the field of fluid engineering, to cases of shoulder contracture using the US. The subjects were eight patients, with 16 shoulders. The coracoid process was identified from the body surface, and a long-axis US image of the CHL parallel to the subscapularis tendon was drawn. The shoulder joint was moved from 0 degrees of internal/external rotation to 60 degrees of internal rotation at a rhythm of one reciprocation every 2 s. The velocity of the CHL movement was quantified by the PIV method. The mean magnitude velocity of CHL was significantly faster on the healthy side. The maximum magnitude velocity was significantly faster on the healthy side. The results suggest that the PIV method is helpful as a dynamic evaluation method, and in patients with shoulder contracture, the CHL velocity was significantly decreased.

Screening for Osteoporosis from Blood Test Data in Elderly Women Using a Machine Learning Approach.

The diagnosis of osteoporosis is made by measuring bone mineral density (BMD) using dual-energy X-ray absorptiometry (DXA). Machine learning, one of the artificial intelligence methods, was used to predict low BMD without using DXA in elderly women. Medical records from 2541 females who visited the osteoporosis clinic were used in this study. As hyperparameters for machine learning, patient age, body mass index (BMI), and blood test data were used. As machine learning models, logistic regression, decision tree, random forest, gradient boosting trees, and lightGBM were used. Each model was trained to classify and predict low-BMD patients. The model performance was compared using a confusion matrix. The accuracy of each trained model was 0.772 in logistic regression, 0.739 in the decision tree, 0.775 in the random forest, 0.800 in gradient boosting, and 0.834 in lightGBM. The area under the curve (AUC) was 0.595 in the decision tree, 0.673 in logistic regression, 0.699 in the random forest, 0.840 in gradient boosting, and 0.961, which was the highest, in the lightGBM model. Important features were BMI, age, and the number of platelets. Shapley additive explanation scores in the lightGBM model showed that BMI, age, and ALT were ranked as important features. Among several machine learning models, the lightGBM model showed the best performance in the present research.

Degree of Accuracy With Which Deep Learning for Ultrasound Images Identifies Osteochondritis Dissecans of the Humeral Capitellum.

BACKGROUND: Medical screening using ultrasonography (US) has been performed on young baseball players for early detection of osteochondritis dissecans (OCD) of the humeral capitellum. Deep learning (DL) and artificial intelligence (AI) techniques are widely adopted in the medical imaging research field. PURPOSE/HYPOTHESIS: The purpose of this study was to calculate the diagnostic accuracy using DL for US images of OCD. We hypothesized that using DL for US imaging would improve the prediction accuracy of OCD. STUDY DESIGN: Cohort study (Diagnosis); Level of evidence, 2. METHODS: A total of 40 elbows (mean age of patients, 12.1 years) that were suspected of having OCD at a medical checkup and later confirmed by radiographs and magnetic resonance imaging were included in the study. The affected elbows were used as the OCD group and the contralateral elbows as the control group. From US videos, 100 images per elbow were captured from different angles, and 4000 images of the elbows were prepared for both groups. Of these, 80% were randomly selected by DL models and used as training data; the remaining were used as test data. Transfer learning was conducted using 3 pretrained DL models. The confusion matrix and the area under the receiver operating characteristic curve (AUC) were used to evaluate the model, and the visualization of the areas deemed important by the DL models was also performed. Furthermore, OCD regions were detected using an automatic image recognition model based on DL. RESULTS: Classification of the OCD image by the DL model was performed; the best accuracy score was 0.87; the recall was 1.00. AUC was high for all DL models. Visualization of important features showed that AI predicted the presence of OCD by focusing on the irregularity or discontinuity of the surface of subchondral bone. In the detection of OCD task, the mean average precision was 0.83. CONCLUSION: The DL on US images identified OCD with high accuracy. The important features detected by the DL models correspond to the areas used by clinicians in screening the US images. The OCD was also detected with high accuracy using the object detection model. The AI model may be used in medical screening for OCD.

Motion Analysis of the Extensor Carpi Ulnaris in Triangular Fibrocartilage Complex Injury Using Ultrasonography Images.

The subsheath of the extensor carpi ulnaris (ECU) tendon, a component of the triangular fibrocartilage complex (TFCC), is particularly important as it dynamically stabilizes the distal radioulnar joint. However, the relationship between TFCC injury and ECU dynamics remains unclear. This study aimed to analyze ECU movement and morphology using ultrasonography (US) images. Twenty wrists of patients with TFCC injury, who underwent TFCC repair, were included in the injury group, and 20 wrists of healthy volunteers were in the control group. For static image analysis, curvature and linearity ratios of the ECU in US long-axis images captured during radioulnar deviation were analyzed. For dynamic analysis of the ECU, the wrist was moved from radial deviation to ulnar deviation at a constant speed, and the velocity of the tendon was analyzed using particle image velocimetry. The static analysis showed that the ECU tendon was more curved in ulnar deviation in the injury group than in the control group, and the dynamic analysis showed that only vertical velocity toward the deep side during ulnar deviation was higher in the injury group. These results suggest that TFCC injury caused ECU curvature during ulnar deviation and increased the vertical velocity of the ECU during wrist deviation.