Surface properties and biocompatibility of sandblasted and acid-etched titanium-zirconium binary alloys with various compositions.

Ti-Zr alloys have been investigated as an alternative to commercially pure Ti (c.p.Ti). According to our previous studies on the mechanical properties of Ti-Zr alloys, a Zr proportion in the range of 30-50 mol% has competitive advantages over Ti-10Zr and c.p.Ti. The aim of this study is to evaluate the biological response to Ti-Zr alloys with different compositions and their surface characteristics. Alloy surfaces are modified by sandblasting and sulfuric acid etching. As a result, similar surface structures are observed for c.p.Ti, Ti-10Zr, and Ti-30Zr, whereas Ti-50Zr does not form a micro-rough structure by the same treatment process. No significant difference is found in the viability of cells on c.p.Ti, Ti-10Zr, and Ti-30Zr, whereas lower cell attachment levels are detected on Ti-50Zr. In summary, Ti-30Zr reliably forms a micro-rough structure, which provides one evidence for its application in a new dental implant material.

Liquid/solution-based microfluidic quantum dots light-emitting diodes for high-colour-purity light emission.

Organic light-emitting diodes (OLEDs) using a liquid organic semiconductor (LOS) are expected to provide extremely flexible displays. Recently, microfluidic OLEDs were developed to integrate and control a LOS in a device combined with microfluidic technology. However, LOS-based OLEDs show poor-colour-purity light emissions owing to their wide full width at half maximum (FWHM). Here we report liquid/solution-based microfluidic quantum dots light-emitting diodes (QLEDs) for high-colour-purity light emission. Microfluidic QLEDs contain liquid materials of LOS for a backlight and QDs solutions as luminophores. The microfluidic QLED exhibits red, green, and blue light emissions and achieves the highest light colour purity ever reported among LOS-based devices for green and red lights with narrow FWHMs of 26.2 nm and 25.0 nm, respectively. Additionally, the effect of the channel depth for the luminophore on the peak wavelength and FWHM is revealed. The developed device extends the capabilities of flexible microfluidic OLEDs-based and QDs-based displays.

Biological reaction control using topography regulation of nanostructured titanium.

The micro- and nanosize surface topography of dental implants has been shown to affect the growth of surrounding cells. In this study, standardized and controlled periodic nanopatterns were fabricated with nanosized surface roughness on titanium substrates, and their influence on bone marrow stromal cells investigated. Cell proliferation assays revealed that the bare substrate with a 1.7 nm surface roughness has lower hydrophilicity but higher proliferation ability than that with a 0.6 nm surface roughness. Further, with the latter substrate, directional cell growth was observed for line and groove patterns with a width of 100 nm and a height of 50 or 100 nm, but not for those with a height of 10 or 25 nm. With the smooth substrate, time-lapse microscopic analyses showed that more than 80% of the bone marrow cells on the line and groove pattern with a height of 100 nm grew and divided along the lines. As the nanosized grain structure controls the cell proliferation rate and the nanosized line and groove structure (50-100 nm) controls cell migration, division, and growth orientation, these standardized nanosized titanium structures can be used to elucidate the mechanisms by which surface topography regulates tissue responses to biomaterials.

Development of microstructured fish scale collagen scaffolds to manufacture a tissue-engineered oral mucosa equivalent.

The present study aimed to develop a more biomimetic tissue-engineered oral mucosa equivalent comprising 1% type I tilapia scale collagen scaffold having microstructures mimicking the dermal-epidermal junction of oral mucosa and oral keratinocytes as graft materials for human use. We designed four micropattern prototypes mimicking the dermal-epidermal junction. Using a semiconductor process and soft lithography, negative molds were fabricated to develop microstructures using both polydimethylsiloxane and silicon substrates. Micropattern configurations of dermal-epidermal junctions manufactured from fish collagen consisting of a fibril network using our micropatterning system were well preserved, although the internal fibril network of the pillar pattern was sparse. Mixing 1% chondroitin sulfate with the collagen matrix minimized tissue-engineered oral mucosa equivalent contraction. Histologic examinations showed a flattening of the vertical dimensions of all microstructures and expansion of their pitches, indicating changes in the originally designed configurations. Nonetheless, histologic examinations revealed that a fully differentiated and stratified epithelial layer was developed on all scaffolds, suggesting that the microstructured fish scale collagen scaffolds have potential in the manufacturing of tissue-engineered oral mucosa equivalents for clinical use; however, enhancement of the mechanical properties of micropatterns is required. Our micropatterning technology can also apply to the development of oral mucosa in vitro models.

Highly flexible transparent electrodes based on mesh-patterned rigid indium tin oxide.

We developed highly bendable transparent indium tin oxide (ITO) electrodes with a mesh pattern for use in flexible electronic devices. The mesh patterns lowered tensile stress and hindered propagation of cracks. Simulations using the finite element method confirmed that the mesh patterns decreased tensile stress by over 10% because of the escaped strain to the flexible film when the electrodes were bent. The proposed patterned ITO electrodes were simply fabricated by photolithography and wet etching. The resistance increase ratio of a mesh-patterned ITO electrode after bending 1000 times was at least two orders of magnitude lower than that of a planar ITO electrode. In addition, crack propagation was stopped by the mesh pattern of the patterned ITO electrode. A mesh-patterned ITO electrode was used in a liquid-based organic light-emitting diode (OLED). The OLED displayed the same current density-voltage-luminance (J-V-L) curves before and after bending 100 times. These results indicate that the developed mesh-patterned ITO electrodes are attractive for use in flexible electronic devices.

In-Plane Anisotropic Molecular Orientation of Pentafluorene and Its Application to Linearly Polarized Electroluminescence.

By preparing parallelly aligned 1.9-µm-high SiO2 microfluidic channels on an indium tin oxide substrate surface, the solution flow direction during spin-coating was controlled to be parallel to the grating. Using this technique, a pentafluorene-4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP) binary solution in chloroform was spin-coated to embed a 40-50 nm-thick 10 wt %-pentafluorene:CBP thin film in the channels. In-plane polarized photoluminescence measurements revealed that the pentafluorene molecules tended to orient along the grating, demonstrating that one-dimensional fluid flow can control the in-plane molecular orientation. Furthermore, the dependences of the photoluminescence anisotropy on the spin speed and substrate material suggest that the velocity of the solution flow and/or its gradient in the vertical direction greatly affects the resulting orientation. This indicates that the mechanism behind the molecular orientation is related to stress such as the shear force. The effect of the solution flow on the molecular orientation was demonstrated even in organic light-emitting diodes (OLEDs). Linearly polarized electroluminescence was obtained by applying the in-plane orientation to OLEDs, and it was found that the dichroic ratio of the electroluminescence orthogonal (x) and parallel (y) to the grating is x/y = 0.75.