Effect of Condensed Water at an Alumina/Epoxy Resin Interface on Curing Reaction.

The adhesion of epoxy adhesives to aluminum materials is an important issue in assembling parts for lightweight mobility. Aluminum surfaces typically possess an oxide layer, which readily adsorbs water. In this study, the aggregation states of water and its effect on the curing reaction were examined by placing a water layer between an amorphous alumina surface and a mixture of epoxy and amine components. This study used molecular dynamics simulations and density functional theory calculations. Before the reaction, water molecules strongly adsorbed onto the alumina surface, aggregating excess water. Some water diffused into the epoxy/amine mixture, accelerating the diffusion of unreacted substances. This led to faster reaction kinetics, particularly in proximity to the alumina surface. The adsorption of water molecules onto the alumina surface and the aggregation of excess water were similarly observed even after the curing process. Subsequently, the interaction between the alumina surface and various functional groups of the epoxy/amine mixture was evaluated before and after the reaction. Epoxy monomers had little interaction with the alumina surface before the reaction, whereas hydroxy groups formed by the ring-opening reaction of epoxy groups exhibited notable interaction. Conversely, sulfonyl and amino groups in amine compounds formed hydrogen bonds with OH groups on the alumina surface before the reaction. However, after the reaction, amino groups weakened their interaction with the alumina OH groups as they transformed from primary to tertiary during the curing reaction. Both epoxy and amine monomers/fragments similarly interacted with water molecules, both before and after the reaction. The insights gained from this study are expected to contribute to a better understanding of the impact of moisture absorption on the application of epoxy resins.

Exploring the Impact of Molecular Structure on Curing Kinetics: A Comparative Study of Diglycidyl Ether of Bisphenol A and F Epoxy Resins.

Epoxy resins are essential for various applications, and their properties depend on the curing reactions during which epoxy and amine compounds form the network structure. We here focus on how the presence or absence of two methyl groups in common epoxy bases, diglycidyl ether of bisphenol A and F (4,4'-DGEBA and 4,4'-DGEBF), affects the curing kinetics. The chemical reactions of both 4,4'-DGEBA and 4,4'-DGEBF, when cured with the same amine, were monitored by Fourier-transform infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC). Despite no difference in the reactivity of epoxy groups between 4,4'-DGEBA and 4,4'-DGEBF, the initial curing reaction was slower for the latter. This delay for the 4,4'-DGEBF system was attributed to intermolecular stacking, which hindered the approach of unreacted epoxy groups to amino groups and vice versa. This conclusion was drawn from the results obtained through ultraviolet (UV) spectroscopy, wide-angle X-ray scattering (WAXS), density functional theory (DFT) calculation, and all-atom molecular dynamics (MD) simulation.

All-proportional solid solution versus two-phase coexistence in the Ti-V alloy by first-principles phase field and SQS methods.

The microstructures of the Ti-V alloy are studied by purely first-principles calculations without relying on any empirical or experimental parameter. The special quasirandom structure model is employed to treat the all-proportional solid solution [Formula: see text] phase, while the first-principles phase field method or its variant is employed to treat the coexistence phases. The linearity of the calculated local free energy against the integer Ti[Formula: see text]V[Formula: see text] composition in the cluster expansion method manifests a clear evidence of the solid solution behavior. From a detailed energy comparison, our results are consistent with the experimental fact that the Ti-V alloy is an all-proportional solid solution of the [Formula: see text] phase at high temperatures and exhibits an [Formula: see text] coexistence at low temperatures. Moreover, it is found that mosaic-type microstructures may appear as a metastable phase, as observed by many experiments. The first-principles criterion for the all-proportional solid solution behavior presented in this paper is very general and can be applied to any other binary or multi-component alloys.

Dynamic behaviour of water molecules in heterogeneous free space formed in an epoxy resin.

Although an epoxy resin is a stable material, it absorbs moisture over a long period of time, causing deterioration of its material properties. We here applied a full-atomistic molecular dynamics (MD) simulation to study where water molecules exist in an epoxy resin and how they dynamically behave. First, the curing reaction was simulated to obtain a network structure so that the time course of the density, and thereby the free space, in the resin were obtained. The results made it possible to discuss the formation and size distribution of the free spaces which were not connected to each other. Then, a few percent of water were inserted into the free space of the cured epoxy resin to examine the location and dynamics of their molecules. We found that several water molecules were clustered at a preferred site, where hydrogen bonds can be formed with hydroxy, ether and amino groups of the network, in the free space, and they heterogeneously moved from there to other sites.

Mass production of low-boiling point solvent- and water-soluble graphene by simple salt-assisted ball milling.

Developing a mass production method for graphene is essential for practical usage of this remarkable material. Direct exfoliation of graphite in a liquid is a promising approach for production of high quality graphene. However, this technique has three huge obstacles to be solved; limitation of solvent, low yield and low quality (i.e., multilayer graphene with a small size). Here, we found that soluble graphite produced by mechanochemical reaction with salts overcomes the above three drawbacks. Soluble graphite was exfoliated into monolayer graphene with more than 10% yield in five minutes of sonication. The modified graphite was easily exfoliated in a low-boiling point solvent such as acetone, alcohol and water without the aid of a surfactant. Molecular simulation revealed that the salt is adsorbed to the active carbon at the graphite edge. In the case of weak acid salts, the original bonding nature between the alkali ion and the base molecule is retained after the reaction. Thus, alkali metals are easily dissociated in a polar solvent, leading to negative charge of graphene, enabling the exfoliation of graphite in low boiling point solvents. The approach proposed here opens up a new door to practical usage of the attractive 2D material.

First-principles study on the atomistic corrosion processes of iron.

The corrosion of iron presents an important scientific problem and a serious economic issue. It is also one of the most important subjects in materials science because it is basically an electrochemical process and closely related to other topics such as the electrocatalysis of the oxygen reduction reaction. So far, many studies have been conducted to address the corrosion of iron, a very complicated process that occurs when iron is exposed to oxygen and water. An important question is, at which site of the iron surface the corrosion starts and how it results in the final stage of the corrosion. In the present study, as an example of superficial defects, Fe dimers sticking out of Fe(100) surfaces are considered in order to understand the iron corrosion process from first-principles using density functional theory. We found that the Fe dimers spontaneously react with O2 and H2O to form Fe2(OH)4 + 4OH-. Here, it is interesting to note that the Fe dimer plays the role of a water splitting catalyst, because the space above it is always vacant and can accept oxygen molecules many times for reacting with the surrounding water molecules. Then, if the Fe2(OH)4 molecules are detached from the surface, they react with O2 to form Fe2O(OH)4 without an activation barrier, and, in turn, the Fe2O(OH)4 and H2O molecules react to form Fe2(OH)6 complexes with an activation energy of 0.653 eV. If these complexes further dissociate into Fe(OH)3 molecules, they react with each other to form Fe2O3·2H2O with an activation energy of 0.377 eV. This work may provide useful information on possible iron corrosion processes by water in the air.

A self-consistent GW approach to the van der Waals potential for a helium dimer.

van der Waals interaction between two helium (He) atoms is studied by calculating the total energy as a function of the He-He distance within the self-consistent GW approximation, which is expected to behave correctly in the long wavelength limit. In the Born-Oppenheimer (BO) approximation, the pair potential curve has its minimum value at 2.87 Å, which is somewhat larger than the local density approximation result, 2.40 Å, and is closer to previous quantum chemistry results. The expectation value for the interatomic distance, calculated by solving the Schrödinger equation for the two nuclei problem using the BO potential energy curve, is 30 Å, which is smaller but of the same order as previous experimental and theoretical results.

Relationship between cap structure and energy gap in capped carbon nanotubes.

Revealing a universal relation between geometrical structures and electronic properties of capped carbon nanotubes (CNTs) is one of the current objectives in nanocarbon community. Here, we investigate the local curvature of capped CNTs and define the cap region by a crossover behavior of the curvature energy versus the number of carbon atoms integrated from the tip to the tube region. Clear correlations among the energy gap of the cap localized states, the curvature energy, the number of carbon atoms in the cap region, and the number of specific carbon clusters are observed. The present analysis opens the way to understand the cap states.

Validity of virial theorem in all-electron mixed basis density functional, Hartree-Fock, and GW calculations.

In this paper, we calculate kinetic and potential energy contributions to the electronic ground-state total energy of several isolated atoms (He, Be, Ne, Mg, Ar, and Ca) by using the local density approximation (LDA) in density functional theory, the Hartree-Fock approximation (HFA), and the self-consistent GW approximation (GWA). To this end, we have implemented self-consistent HFA and GWA routines in our all-electron mixed basis code, TOMBO. We confirm that virial theorem is fairly well satisfied in all of these approximations, although the resulting eigenvalue of the highest occupied molecular orbital level, i.e., the negative of the ionization potential, is in excellent agreement only in the case of the GWA. We find that the wave function of the lowest unoccupied molecular orbital level of noble gas atoms is a resonating virtual bound state, and that of the GWA spreads wider than that of the LDA and thinner than that of the HFA.

Encapsulation of carbon chain molecules in single-walled carbon nanotubes.

The vacuum space inside carbon nanotubes offers interesting possibilities for the inclusion, transportation, and functionalization of foreign molecules. Using first-principles density functional calculations, we show that linear carbon-based chain molecules, namely, polyynes (C(m)H(2), m = 4, 6, 10) and the dehydrogenated forms C(10)H and C(10), as well as hexane (C(6)H(14)), can be spontaneously encapsulated in open-ended single-walled carbon nanotubes (SWNTs) with edges that have dangling bonds or that are terminated with hydrogen atoms, as if they were drawn into a vacuum cleaner. The energy gains when C(10)H(2), C(10)H, C(10), C(6)H(2), C(4)H(2), and C(6)H(14) are encapsulated inside a (10,0) zigzag-shaped SWNT are 1.48, 2.04, 2.18, 1.05, 0.55, and 1.48 eV, respectively. When these molecules come inside a much wider (10,10) armchair SWNT along the tube axis, they experience neither an energy gain nor an energy barrier. They experience an energy gain when they approach the tube walls inside. Three hexane molecules can be encapsulated parallel to each other (i.e., nested) inside a (10,10) SWNT, and their energy gain is 1.98 eV. Three hexane molecules can exhibit a rotary motion. One reason for the stability of carbon chain molecules inside SWNTs is the large area of weak wave function overlap. Another reason concerns molecular dependence, that is, the quadrupole-quadrupole interaction in the case of the polyynes and electron charge transfer from the SWNT in the case of the dehydrogenated forms. The very flat potential surface inside an SWNT suggests that friction is quite low, and the space inside SWNTs serves as an ideal environment for the molecular transport of carbon chain molecules. The present theoretical results are certainly consistent with recent experimental results. Moreover, the encapsulation of C(10) makes an SWNT a (purely carbon-made) p-type acceptor. Another interesting possibility associated with the present system is the direction-controlled transport of C(10)H inside an SWNT under an external field. Because C(10)H has an electric dipole moment, it is expected to move under a gradient electric field. Finally, we derive the entropies of linear chain molecules inside and outside an open-ended SWNT to discuss the stability of including linear chain molecules inside an SWNT at finite temperatures.