XANES/EXAFS and quantum chemical study of the speciation of arsenic in the condensate formed in landfill gas processing: Evidence of the dominance of As-S species.

The XANES/EXAFS data and quantum chemical simulations presented in this study demonstrate several features of the chemistry of arsenic compounds found in the condensates and solids generated in landfill gas (LFG) processing carried out for renewable natural gas (RNG) production. The XANES data show the decrease in the position of the absorption edge of As atoms, similar to that characteristic for sulfur-containing As solutes and solids. The EXAFS data show that the As-O and As-S distances in these matrixes are similar to those in thioarsenates. Quantum-chemical calculations demonstrated the close agreement between the experimental and modeled As-S and As-O distances determined for a range of methylated and thiolated arsenic solutes. These calculations also showed that the increase of the number of the As-S bonds in the coordination shell of arsenic is accompanied by a consistent decrease of the charges of As atoms. This decrease is correlated with the number of the As-S bonds, in agreement with the trend observed in the XANES data. These results provide insight into the intrinsic chemistry and reactivity of As species present in LFG matrixes; they may be helpful for the development of treatment methods to control arsenic in these systems.

DFT and ONIOM Simulation of 1,3-Butadiene Polymerization Catalyzed by Neodymium-Based Ziegler-Natta System.

Using modern methods of quantum chemistry, a theoretical substantiation of the high cis-stereospecificity of 1,3-butadiene polymerization catalyzed by the neodymium-based Ziegler-Natta system was carried out. For DFT and ONIOM simulation, the most cis-stereospecific active site of the catalytic system was used. By analyzing the total energy, as well as the enthalpy and Gibbs free energy of the simulated catalytically active centers, it was found that the coordination of 1,3-butadiene in the trans-form was more favorable than in the cis-form by 11 kJ/mol. However, as a result of π-allylic insertion mechanism modeling, it was found that the activation energy of cis-1,3-butadiene insertion into the π-allylic neodymium-carbon bond of the terminal group on the reactive growing chain was 10-15 kJ/mol lower than the activation energy of trans-1,3-butadiene insertion. The activation energies did not change when both trans-1,4-butadiene and cis-1,4-butadiene were used for modeling. That is, 1,4-cis-regulation was due not to the primary coordination of 1,3-butadiene in its cis-configuration, but to its lower energy of attachment to the active site. The obtained results allowed us to clarify the mechanism of the high cis-stereospecificity of 1,3-butadiene polymerization by the neodymium-based Ziegler-Natta system.

Modulating the Inclusive and Coordinating Ability of Thiacalix[4]arene and Its Antenna Effect on Yb3-Luminescence via Upper-Rim Substitution.

The present work introduces the series of thiacalix[4]arenes (H4L) bearing different upper-rim substituents (R = H, Br, NO2) for rational design of ligands providing an antenna-effect on the NIR Yb3+-centered luminescence of their Yb3+ complexes. The unusual inclusive self-assembly of H3L- (Br) through Brπ interactions is revealed through single-crystal XRD analysis. Thermodynamically favorable formation of dimeric complexes [2Yb3+:2HL3-] leads to efficient sensitizing of the Yb3+ luminescence for H4L (Br, NO2), while poor sensitizing is observed for ligand H4L (H). X-ray analysis of the single crystal separated from the basified DMF solutions of YbCl3 and H4L(NO2) has revealed the transformation of the dimeric complexes into [4Yb3+:2L4-] ones with a cubane-like cluster structure. The luminescence characteristics of the complexes in the solutions reveal the peculiar antenna effect of H4L(R = NO2), where the triplet level at 567 nm (17,637 cm-1) arisen from ILCT provides efficient sensitizing of the Yb3+ luminescence.

Role of PSS-based assemblies in stabilization of Eu and Sm luminescent complexes and their thermoresponsive luminescence.

The present work introduces self-assembled polystyrenesulfonate (PSS) molecules as soft nanocapsules for incorporation of Eu3+-Sm3+ complexes by the solvent exchange procedure. The high levels of Eu3+- and Sm3+-luminescence of the complexes derives from the ligand-to-metal energy transfer, in turn, resulted from the complex formation of Eu3+and Sm3+ ions with the three recently synthesized cyclophanic 1,3-diketones. The structural features of the ligands are optimized for the high thermal sensitivity of Eu3+- luminescence in DMF solutions. The PSS-nanocapsules (∼100 nm) provide both colloid and chemical stabilization of the ultrasmall (3-5 nm) nanoprecipitates of the complexes, although their luminescence spectra patterns and excited state lifetimes differ from the values measured for the complexes in DMF solutions. The specific concentration ratio of the Eu3+-Sm3+ complexes in the DMF solutions allows to tune the intensity ratio of the luminescence bands at 612 and 650 nm in the heterometallic Eu3+-Sm3+ colloids. The thermal sensitivity of the Eu3+- and Sm3+-luminescence of the complexes derives from the static quenching both in PSS-colloids and in DMF solutions, while the thermo-induced dynamic quenching of the luminescence is significant only in DMF solutions. The reversibility of thermo-induced luminescence changes of the Eu3+-Sm3+ colloids is demonstrated by six heating-cooling cycles. The DLS measurements before and after the six cycles reveal the invariance of the PSS-based capsule as the prerequisite for the recyclability of the temperature monitoring through the ratio of Eu3+-to- Sm3+ luminescence.

Removal of dimethylarsinic acid (DMA) in the Fe/C system: roles of Fe(II) release, DMA/Fe(II) and DMA/Fe(III) complexation.

Methylated arsenic species are ubiquitous in the environment and resistant to removal by conventional treatment technologies. This study addressed this challenge based on the examination of the removal of dimethylarsinic acid (DMA) in a system that combines zerovalent iron (ZVI) and powdered activated carbon (PAC). The removal of DMA in the ZVI/PAC system was compared to that by coagulation, adsorption, electrochemical and Fenton oxidations, and other conventional methods. While only the electrochemical oxidation using a PbO2/Sb-SnO2/Ti anode allowed removing up to 60% DMA at several hours-long treatment times, the removal of DMA in the ZVI/PAC system containing 10 g/L ZVI and 2.5 g/L PAC with an initial pH of 2.0 was 95% for a 30 min reaction time. Specific roles of PAC, ZVI and its oxidation products in DMA removal were examined based on the spectroscopic data and quantum chemical modeling for the DMA/Fe(II) and DMA/Fe(III) systems. These methods demonstrated the formation of moderately strong DMA/Fe(II) and DMA/Fe(III) complexation. These results and relevant kinetic data were interpreted to indicate that the removal of DMA is governed by the rapid generation of Fe2+ ions released as a result of accelerated ZVI corrosion in the galvanic ZVI/PAC microcells and ensuing formation of DMA/ Fe2+ complexes that are readily adsorbed by PAC.

Interpretation of the differential UV-visible absorbance spectra of metal-NOM complexes based on the quantum chemical simulations for the model compound esculetin.

In this study, the model compound esculetin that has functional groups typical for natural organic matter (NOM) was used to ascertain the nature of the characteristic bands in the differential UV-visible absorbance spectra (DAS) associated with the formation of metal-NOM complexes. The binding of ten different metal ions (Cu(II), Ni(II), Co(II), Fe(III), Cr(III), Al(III), Zn(II), Ca(II), Mg(II) and Pb(II)) with esculetin generate four bands in the DAS. These bands are similar to those present in the DAS of metal-NOM complexes. The UV-visible absorbance spectra of the metal-esculetin systems were calculated using time-dependent density functional theory (TD-DFT). The TD-DFT results demonstrate that the prominent features of the DAS of esculetin are primarily associated with the electron transitions between the molecular orbitals near the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) in the metal-esculetin complex. Charge decomposition analysis (CDA) results demonstrated that these electron transitions originate from the esculetin fragment to the Zn(II) fragment in the complex. Covalent indexes [(χm)2rc] of the metal ions were found to be correlated with the metal-specific features of the DAS of metal-esculetin systems. The strength of the linear correlations between the quantitative parameters of the electron density of the bond critical points (BCP) is indicative of the strength of the metal-esculetin interactions.

Correction: A simple synthetic approach to enhance the thermal luminescence sensitivity of Tb3+ complexes with thiacalix[4]arene derivatives through upper-rim bromination.

Correction for 'A simple synthetic approach to enhance the thermal luminescence sensitivity of Tb3+ complexes with thiacalix[4]arene derivatives through upper-rim bromination' by Sergey N. Podyachev, et al., Dalton Trans., 2020, 49, 8298-8313, DOI: 10.1039/D0DT00709A.

A simple synthetic approach to enhance the thermal luminescence sensitivity of Tb3+ complexes with thiacalix[4]arene derivatives through upper-rim bromination.

The present work for the first time reports an application of the thiacalix[4]arene scaffold for the preparation of Tb3+ complexes possessing high thermal luminescence sensitivity in the physiological temperature range of 20-50 °C. Non-substituted thiacalix[4]arenes form luminescent complexes with Tb3+ ions, but they do not reveal any meaningful thermal sensitivity. To solve this problem, an upper-rim bromination of thiacalix[4]arenes, as well as distal bromination along with the embedding of two 1,3-diketone substituents are proposed as new simple synthetic approaches to enhance the thermal luminescence sensitivity of the Tb3+ complexes. A combination of mass spectrometry, NMR, UV-Vis and luminescence spectroscopy with quantum chemical calculations reveals a dimeric structure of the complexes formed by thiacalix[4]arenes with Tb3+ ions in DMF solutions. The steady-state luminescence of the Tb3+ complexes has demonstrated more than one order higher thermal sensitivity for the complexes of bromo-substituted ligands in comparison with the non-substituted thiacalix[4]arenes. The reasons for such behavior are discussed. The results highlight new opportunities for the thiacalix[4]arene platform for controlling ligand-to-metal energy transfer in terbium complexes and tuning their thermo-responsive luminescence properties.

Comparison of the yields of mono-, Di- and tri-chlorinated HAAs and THMs in chlorination and chloramination based on experimental and quantum-chemical data.

Thermodynamic and kinetic aspects of the formation of trihalomethanes and haloacetic acids determined based on the quantum chemical (QC) simulations were compared in this study with the experimental data generated using the differential spectroscopy approach in chlorination and chloramination. The ratios of the slopes of the correlations between -DlnA350 values and individual DBPs concentrations (SNH2Cl/SHOCl) were observed to be linearly correlated with the ratios of the Gibbs free energies (ΔGNH2Cl/ΔGHOCl) of the corresponding reactions of chloramine and chlorine with acetaldehyde which was used as a model DBP precursor in QC simulations. Further QC examination of the kinetics of chlorination and chloramination of the model compound acetoacetic acid showed that the activation energy of reactions between monochloramine that directly participates in substitution reactions to form mono-, di and tri-halogenated intermediates are 2-3 times higher than those of HOCl formed via the hydrolysis monochloramine. This result confirms that the interactions of chloramine with NOM and ensuing DBP formation are primarily mediated by the free chlorine released as a result of the hydrolysis of monochloramine while direct halogenation of NOM by monochloramine is likely to provide a small contribution to DBP formation.

Experimental and quantum-chemical study of differential absorbance spectra of environmentally relevant species: A study of quercetin deprotonation and its interactions with copper (II) ions.

This study compared the experimental and theoretically calculated differential absorbance spectra (DAS) of quercetin, which is a typical model compound of natural organic matter (NOM) that is found in biochemical and environmental systems. Absorbance spectra of quercetin, which has five exchangeable protons, were generated at each state of deprotonation and its binding with Cu(II) ions. The spectra showed that the emergence of characteristic peaks in the experimental DAS was associated with the deprotonation of quercetin and its binding with Cu(II). Calculations of the theoretical DAS were conducted based on the time-dependent density functional theory (TD-DFT) methods and yielded results that were consistent with the experimental DAS data because the features in the absorbance spectra were primarily associated with the electron transitions from the highest occupied molecular orbital (HOMO) to the lowest unoccupied molecular orbital (LUMO) in the molecule. The appearance of the characteristic peaks in the DAS reflects the changes of the structure and electron distribution of the organic molecules that are induced by water treatment or environmental processes.

Structural and photophysical properties of Tb3+-tetra-1,3-diketonate complexes controlled by calix[4]arene-tetrathiacalix[4]arene scaffolds.

The present work highlights the key aspects of the influence of calix[4]arene and tetrathiacalix[4]arene scaffolds on the structural and photophysical properties of Tb3+ complexes with tetra-1,3-diketone derivatives of the macrocycles in DMF solutions. The equilibrium forms of Tb3+ complexes with unsubstituted and functionalized by acetylacetonyl groups at the upper rim of calix[4]arenes and thiacalix[4]arenes are revealed from UV-, NMR, MALDI TOF mass spectroscopy, quantum-chemical calculations at the DFT level and luminescence spectroscopy data. In alkaline DMF solutions, the ligands form predominantly 1 : 1 complexes with Tb3+ ions. However, the replacement of a calix[4]arene-scaffold by a thiacalix[4]arene-scaffold in the tetra-1,3-diketone derivatives shifts the equilibrium forms of Tb3+ complexes from monomeric to the dimeric ones. DFT calculations in combination with experimental data reveal the most reliable structures of complexes. The quantitative analysis of the photophysical parameters in correlation with the structural features of the complexes highlights the specific inner-sphere environment of Tb3+ ions in the dimeric complexes with the thiacalix[4]arene derivatives as a reason for greater sensitization of Tb3+-centered luminescence.

Quantum-chemical simulations of the hydration of Pb(II) ion: structure, hydration energies, and pKa1 value.

Thermodynamic and structural aspects of the hydration of Pb(II) ions were explored based on DFT calculations combined with the supermolecular/continuum solvent model. Hydration of Pb(II) was considered as the formation of Pb(H2O)n2+ aqua complexes (n=6-9) from the gas phase Pb(II) ion. Hexa- and hepta-aqua Pb(II) complexes were shown to exhibit the hemidirected symmetry, while those containing eight and nine water molecules are characterized by the holodirected symmetry. The calculations showed that because Pb(H2O)n2+ complexes with six to nine water molecules have comparable thermodynamic stabilities, such complexes are likely to coexist in aqueous solutions. The deprotonation of Pb(H2O)n2+ complexes was shown to result in the formation of the mono-hydroxo complex [Pb(H2O)4OH]+. The pKa1 value determined for this reaction (7.58 for Pb(H2O)62+) was close to the experimental value of 7.61 used in recent models of aquatic equilibria. The density functional method ω-B97X(PCM-UAO) in combination with the atomic basis set 6-311++G(d,p) for O and H and the small-core electron effective pseudopotential (ECP) with the aug-cc-pvdz-PP basis set for Pb can be recommended for such calculations. Graphical abstract Structures of Pb(II) ions with varying numbers of water molecules in the inner hydration shell.

Rotating Ring-Disk Electrode and Quantum-Chemical Study of the Electrochemical Reduction of Monoiodoacetic Acid and Iodoform.

This study examined the electrochemical (EC) reduction of monoiodoacetic acid (MIAA) and iodoform (CHI3), which are typical iodine-containing disinfection byproducts (I-DBPs). Experiments carried out using the method of a rotating ring-disk electrode (RRDE) with a gold working electrode showed that the reduction of CHI3 and MIAA is diffusion-controlled. The MIAA diffusion coefficient was determined to be (1.86 ± 0.24)·10(-5) cm(2) s(-1). The yield of the iodide ion formed as a result of MIAA or CHI3 reduction was affected by the presence of dissolved organic matter (DOM) and resorcinol. Increasing concentrations of DOM or resorcinol did not affect the EC reduction of the examined I-DBPs, but the formation of iodide was suppressed. This indicated that free iodine, ·I, was formed as a result of the first step in the EC reduction of MIAA and CHI3. This also indicated that the pathway of the EC reduction of MIAA and CHI3 was different from that typical for the reduction of Br- and Cl-containing DBPs, in which case Br(-) or Cl(-) tend to be formed as a result of the electron transfer. Quantum-chemical (QC) calculations confirmed the thermodynamic likelihood of and possible preference to the formation of free iodine species as a result of the EC reduction of MIAA, CHI3, and other I-DBPs.

Formation of Pb(III) intermediates in the electrochemically controlled Pb(II)/PbO2 system.

The formation of lead dioxide PbO(2), an important corrosion product in drinking water distribution systems with lead-bearing plumbing materials, has been hypothesized to involve Pb(III) intermediates, but their nature and formation mechanisms remain unexplored. This study employed the electrochemical (EC) method of rotating ring disk electrode (RRDE) and quantum chemical (QC) simulations to examine the generation of intermediates produced during the oxidation of Pb(II) to PbO(2). RRDE data demonstrate that PbO(2) deposition and reduction involves at least two intermediates. One of them is a soluble Pb(III) species that undergoes further transformations to yield immobilized PbO(2) nanoparticles. The formation of this intermediate in EC system is mediated by hydroxyl radicals (OH(•)), as was evidenced by the suppression of intermediates formation in the presence of the OH(•) scavenger para-chlorobenzoic acid. QC simulations confirmed that the oxidation of Pb(II) by OH(•) proceeds via Pb(III) species. These results show that Pb(III) intermediates play an important role in the reactions determining transitions between Pb(II) and Pb(IV) species and could impact lead release in drinking water.

Spin crossover in tetranuclear cyanide-bridged iron(II) square complexes: a theoretical study.

Spin crossover in a series of six cyanide-bridged iron(II) tetranuclear square complexes was analyzed using density functional theory (DFT) methods. As the spin crossover between the low-spin (LS) and high-spin (HS) states can occur only for two of four iron ions, we characterized energetically and structurally the [LS-LS], [HS-LS], and [HS-HS] spin-state isomers. For all studied complexes, the energy of the mixed [HS-LS] spin state does not deviate essentially from the halfway point between the energies of homogeneous spin states, thereby satisfying the conditions for an one-step transition between the [LS-LS] and [HS-HS]. This fact reflects the weak elastic coupling between the environments of transiting centers. The two-step spin transition observed in one complex can appear only due to the crystal packing effects. We also evaluated the strength of exchange coupling between the paramagnetic ions in the [HS-HS] state.

RF shimming for spectroscopic localization in the human brain at 7 T.

Spectroscopic imaging of the human head at short echo times (98% suppression of extracerebral lipids) without the use of gradients. This novel B1+ distribution is used in conjunction with a double inversion recovery method to provide suppression of extracerebral resonances with T1s greater than 400 ms, while having negligible effect on metabolite ratios of cerebral resonances with T1s>1000 ms. Despite the use of two adiabatic pulses, the high efficiency of the ring distribution allows radiofrequency power deposition to be limited to 3-4 W for a pulse repetition time of 1.5 sec. The short echo time enabled the acquisition of images of the human brain, displaying glutamate, glutamine, macromolecules, and other major cerebral metabolites.

Redox potential of the Rieske iron-sulfur protein quantum-chemical and electrostatic study.

Quantum-chemical study of structures, energies, and effective partial charge distribution for several models of the Rieske protein redox center is performed in terms of the B3LYP density functional method in combination with the broken symmetry approach using three different atomic basis sets. The structure of the redox complex optimized in vacuum differs markedly from that inside the protein. This means that the protein matrix imposes some stress on the active site resulting in distortion of its structure. The redox potentials calculated for the real active site structure are in a substantially better agreement with the experiment than those calculated for the idealized structure. This shows an important role of the active site distortion in tuning its redox potential. The reference absolute electrode potential of the standard hydrogen electrode is used that accounts for the correction caused by the water surface potential. Electrostatic calculations are performed in the framework of the polarizable solute model. Two dielectric permittivities of the protein are employed: the optical permittivity for calculation of the intraprotein electric field, and the static permittivity for calculation of the dielectric response energy. Only this approach results in a reasonable agreement of the calculated and experimental redox potentials.

7T head volume coils: improvements for rostral brain imaging.

PURPOSE: To improve the performance of 7T head coils over the rostral head regions. Due to radiofrequency (RF) field/tissue interactions, the RF magnetic field profile produced by 7T volume head coils is very inhomogeneous, with enhanced sensitivity near the center of the human brain and substantially reduced in the periphery. MATERIALS AND METHODS: Two head-sized quadrature volume coils of similar diameters but substantially different lengths (17 and 10 cm) were constructed and tested using a 7T Varian Inova system. RESULTS: Experimental data demonstrated that by using a shorter volume head-sized coil or simply by partially moving a head out of the coil, coil efficiency near the top of a head can be improved by 20%. The homogeneity also improved, largely resulting from an increase in peripheral B(1) values. This resulted in 10%-20% variation in axial slices located near the top of a head. CONCLUSION: We have demonstrated a less deeply positioned head or substantially shorter volume coil can significantly improve coil performance and homogeneity for the rostral head at ultrahigh magnetic fields (7T and above). For studies that target superior brain regions, this coil arrangement can be highly effective.

Formation thermodynamics of cucurbit[6]uril macrocycle molecules: a theory study.

Macrocyclical molecules are very important molecular cavitands for the supramolecular chemistry in view of host-guest complexation which is a basis for design of molecular devices. One striking example of macrocycles is the family of cucurbit[ n]uril molecules (CB[n]). For effective application of the cavitands of this family it is needed to elucidate the stabilization mechanism of different homologues CB[n]. In this study we have carried out a thermodynamical analysis of macromolecule cyclization from a monomer to a pentamer and CB6. It was found that water molecules, which are formed as one of the products of the reaction of glicoluril with formaldehyde, construct dimer and oligomer CB(m) so that an angle between adjacent building units corresponds to the stable homologue CB[6]. In the framework of the density functional theory (DFT), the structures of hydrated oligomers were optimized. Calculated thermodynamical functions were used for a description of cyclization mechanism of oligomers up to formation of CB[6]. It is assumed that the proposed model can be extended to the formation of higher homologues in diluted water-acid solutions.

High-field actively detuneable transverse electromagnetic (TEM) coil with low-bias voltage for high-power RF transmission.

The design and construction of a 4T (170 MHz) transverse electromagnetic (TEM) actively detuneable quadrature head coil is described. Conventional schemes for active detuning require high negative bias voltages (>300 V) to prevent leakage of RF pulses with amplitudes of 1-2 kW. To extend the power handling capacity and avoid the use of high DC bias voltages, we developed an alternate method of detuning the volume coil. In this method the PIN diodes in the detuning circuits are shorted when the RF volume coil is tuned, and negatively biased with -12 V when the coil is detuned. To preserve the high Q(U)/Q(L) ratio of the TEM coil, we modified the method of Nabetani and Watkins (Proceedings of the 13th Annual Meeting of ISMRM, Kyoto, Japan, 2004, abstract 1574) by utilizing a high-impedance (approximately 200 Omega), lumped-element, quarter-wavelength transformer. A Q(U) of 500 was achieved for the detuneable TEM, such that incorporation of the detuning network had minimal effect (<1 dB) on the performance of the coil in vivo.