Natural clinoptilolite composite membranes on tubular stainless steel supports for water softening.

Disk membranes generated from high-purity natural clinoptilolite mineral rock have shown promising water desalination and de-oiling performance. In order to scale up production of these types of membranes for industrial wastewater treatment applications, a coating strategy was devised. A composite mixture of natural clinoptilolite from St. Cloud (Winston, NM, USA) and aluminum phosphate was deposited on the inner surface of porous stainless steel tubes by the slip casting technique. The commercial porous stainless steel tubes were pre-coated with a TiO2 layer of about 10 µm. Phase composition and morphology of the coating materials were investigated using X-ray diffraction and scanning electron microscopy. Water softening performance of the fabricated membranes was evaluated using Edmonton (Alberta, Canada) municipal tap water as feed source. Preliminary experimental results show a high water flux of 7.7 kg/(m(2) h) and 75% reduction of hardness and conductivity in a once-through membrane process at 95 °C and feed pressure of 780 kPa. These results show that natural zeolite coated, stainless steel tubular membranes have high potential for large-scale purification of oil sands steam-assisted gravity drainage water at high temperature and pressure requirements.

Stability and disintegration of ultrathin heptane films in water: molecular dynamics simulations.

Molecular dynamics simulations of ultrathin heptane films (less than 5 nm in thickness) in water were conducted to study their stability and disintegration behavior. The density distributions of heptane and water molecules across the film were determined for different equilibrium film thicknesses ranging from 1.5 to 4 nm. The potential energy of the system was computed as a function of the heptane number fraction, and the results were employed to determine the excess energy of mixing of heptane in water. The diffusion coefficients of heptane and water obtained from the MD simulations were also compared with experimental data. A good agreement was found between the heptane self-diffusivity obtained from the MD simulations and its literature reported value. Following an analysis of the equilibrium properties of the heptane films and associated structures, we performed simulations where the shapes of the heptane films were initially perturbed. Different perturbations of these ultrathin films led to formation of various associated structures, including cylindrical rodlike heptane droplets, films with holes, and intact films. The different shapes are formed in systems with the same heptane/water composition. An analysis of this behavior is presented showing the possibility of multiple associated structures with similar total energy in these highly confined systems.