Abnormally High Graphitic Crystallization of Cellulose Nanocrystals.

Cellulose nanocrystals (CNCs) are currently of great interest for many applications, such as energy storage and nanocomposites, because of their natural abundance. A number of carbonization studies have reported abnormal graphitization behavior of CNCs, although cellulose is generally known as a precursor for hard carbon (nongraphitizable carbon). Herein, we report a spray-freeze-drying (SFD) method for CNCs and a subsequent carbonization study to ascertain the difference in the structural development between the amorphous and crystalline phases. The morphological observation by high-resolution transmission electron microscopy of the carbonized SFD-CNC clearly shows that the amorphous and crystalline phases of CNC are attributed to the formation of hard and soft carbon, respectively. The results of a reactive molecular dynamics (RMD) study also show that the amorphous cellulose phase leads to the formation of fewer carbon ring structures, indicative of hard carbon. In contrast, the pristine crystalline cellulose phase has a higher density and thermal stability, resulting in limited molecular relaxation and the formation of a highly crystalline graphitic structure (soft carbon).

Electrolyte Design for High-Voltage Lithium-Metal Batteries with Synthetic Sulfonamide-Based Solvent and Electrochemically Active Additives.

Considering practical viability, Li-metal battery electrolytes should be formulated by tuning solvent composition similar to electrolyte systems for Li-ion batteries to enable the facile salt-dissociation, ion-conduction, and introduction of sacrificial additives for building stable electrode-electrolyte interfaces. Although 1,2-dimethoxyethane with a high-donor number enables the implementation of ionic compounds as effective interface modifiers, its ubiquitous usage is limited by its low-oxidation durability and high-volatility. Regulation of the solvation structure and construction of well-structured interfacial layers ensure the potential strength of electrolytes in both Li-metal and LiNi0.8 Co0.1 Mn0.1 O2 (NCM811). This study reports the build-up of multilayer solid-electrolyte interphase by utilizing different electron-accepting tendencies of lithium difluoro(bisoxalato) phosphate (LiDFBP), lithium nitrate, and synthetic 1-((trifluoromethyl)sulfonyl)piperidine. Furthermore, a well-structured cathode-electrolyte interface from LiDFBP effectively addresses the issues with NCM811. The developed electrolyte based on a framework of highly- and weakly-solvating solvents with interface modifiers enables the operation of Li|NCM811 cells with a high areal capacity cathode (4.3 mAh cm-2 ) at 4.4 V versus Li/Li+ .

Compositionally Sequenced Interfacial Layers for High-Energy Li-Metal Batteries.

Electrolyte additives with multiple functions enable the interfacial engineering of Li-metal batteries (LMBs). Owing to their unique reduction behavior, additives exhibit a high potential for electrode surface modification that increases the reversibility of Li-metal anodes by enabling the development of a hierarchical solid electrolyte interphase (SEI). This study confirms that an adequately designed SEI facilitates the homogeneous supply of Li+, nonlocalized Li deposition, and low electrolyte degradation in LMBs while enduring the volume fluctuation of Li-metal anodes on cycling. An in-depth analysis of interfacial engineering mechanisms reveals that multilayered SEI structures comprising mechanically robust LiF-rich species, electron-rich P-O species, and elastic polymeric species enabled the stable charge and discharge of LMBs. The polymeric outer SEI layer in the as-fabricated multilayered SEI could accommodate the volume fluctuation of Li-metal anodes, significantly enhancing the cycling stability Li||LiNi0.8Co0.1Mn0.1O2 full cells with an electrolyte amount of 3.6 g Ah-1 and an areal capacity of 3.2 mAh cm-2. Therefore, this study confirms the ability of interfacial layers formed by electrolyte additives and fluorinated solvents to advance the performance of LMBs and can open new frontiers in the fabrication of high-performance LMBs through electrolyte-formulation engineering.

Regulating electrostatic phenomena by cationic polymer binder for scalable high-areal-capacity Li battery electrodes.

Despite the enormous interest in high-areal-capacity Li battery electrodes, their structural instability and nonuniform charge transfer have plagued practical application. Herein, we present a cationic semi-interpenetrating polymer network (c-IPN) binder strategy, with a focus on the regulation of electrostatic phenomena in electrodes. Compared to conventional neutral linear binders, the c-IPN suppresses solvent-drying-induced crack evolution of electrodes and improves the dispersion state of electrode components owing to its surface charge-driven electrostatic repulsion and mechanical toughness. The c-IPN immobilizes anions of liquid electrolytes inside the electrodes via electrostatic attraction, thereby facilitating Li+ conduction and forming stable cathode-electrolyte interphases. Consequently, the c-IPN enables high-areal-capacity (up to 20 mAh cm-2) cathodes with decent cyclability (capacity retention after 100 cycles = 82%) using commercial slurry-cast electrode fabrication, while fully utilizing the theoretical specific capacity of LiNi0.8Co0.1Mn0.1O2. Further, coupling of the c-IPN cathodes with Li-metal anodes yields double-stacked pouch-type cells with high energy content at 25 °C (376 Wh kgcell-1/1043 Wh Lcell-1, estimated including packaging substances), demonstrating practical viability of the c-IPN binder for scalable high-areal-capacity electrodes.

Universal Solution Synthesis of Sulfide Solid Electrolytes Using Alkahest for All-Solid-State Batteries.

The wet-chemical processability of sulfide solid electrolytes (SEs) provides intriguing opportunities for all-solid-state batteries. Thus far, sulfide SEs are wet-prepared either from solid precursors suspended in solvents (suspension synthesis) or from homogeneous solutions using SEs (solution process) with restricted composition spaces. Here, a universal solution synthesis method for preparing sulfide SEs from precursors, not only Li2 S, P2 S5 , LiCl, and Na2 S, but also metal sulfides (e.g., GeS2 and SnS2 ), fully dissolved in an alkahest: a mixture solvent of 1,2-ethylenediamine (EDA) and 1,2-ethanedithiol (EDT) (or ethanethiol). Raman spectroscopy and theoretical calculations reveal that the exceptional dissolving power of EDA-EDT toward GeS2 is due to the nucleophilicity of the thiolate anions that is strong enough to dissociate the GeS bonds. Solution-synthesized Li10 GeP2 S12 , Li6 PS5 Cl, and Na11 Sn2 PS12 exhibit high ionic conductivities (0.74, 1.3, and 0.10 mS cm-1 at 30 °C, respectively), and their application for all-solid-state batteries is successfully demonstrated.