Assessment of chemical asphyxia caused by toxic gases generated from rigid polyurethane foam (RPUF) fires.

Rigid polyurethane foam (RPUF) is widely used for thermal and sound insulation owing to their low thermal conductivity and light weight. However, they have serious disadvantages, including flammability and toxic gas generation, which can cause chemical asphyxia during a fire. Carbon monoxide (CO) and hydrogen cyanide (HCN) are representative toxic gases formed by incomplete combustion and HCN, in particular, is closely related to polyurethane product fires. In this study, the risk of inhalation of toxic gases such as CO, HCN and NO2 during RPUF fires was demonstrated convincingly through the analysis of carboxyhemoglobin (COHb), cyanide (CN-) and methemoglobin (MetHb) in the postmortem blood samples of 38 victims of RPUF fires. To better understand the toxic gas poisoning and chemical asphyxia, we classified all cases into two groups based on the extent of injuries and location where the victim was found. Mean concentrations of COHb and cyanide in group 1 without injuries were approximately two times higher than in group 2 with severe injuries, while concentrations of free MetHb showing possibility of NO2 inhalation were approximately six times lower than in group 2. Furthermore, we presumed concentrations of cyanide at the time of death and five cases showed the possibility of cyanide poisoning.

Analysis of ethyl glucuronide and ethyl sulfate in blood to determine the absorption or elimination phase of alcohol for Korean.

This study was conducted to understand alcohol kinetics for Koreans and to determine whether an individual is in absorption phase or elimination phase at the time of blood collection by analyzing of ethyl glucuronide and ethyl sulfate in blood. A total of 50 healthy adults was selected and assigned to drink 1g of ethanol per kg body weight of individual within 1h. Blood samples were then collected every 15min for the first 3h, 30min next 3h, and 1h last 9h. Urine samples were also collected from the individual, but not under the controlled environment. All samples were then analyzed by gas chromatography with a flame ionization detector (GC-FID) for alcohol and liquid chromatography-mass/mass spectrometry (LC-MS/MS) for EtG and EtS. The maximum BAC (Cmax) was 0.138% (g/100mL) in average under the controlled experimental condition. Alcohol elimination rates (ß) in average were 0.020% for male and 0.024% for female, respectively. It was found that the ratio of UAC and BAC was less than 1 in the absorption phase and the average ratio of UAC and BAC was 1.47 in the elimination phase. The comparison of BAC (g/L) and EtG (mg/L) absorption and elimination curves showed that the intersection time was 3.9h in average. It is shown that the ratio of EtG (mg/L)/BAC (g/L) is higher than 1, the individual would be in elimination phase of BAC. At the time of Cmax, the ratio of EtG (mg/L)/BAC (g/L) was 0.255±0.132 (SD) in average.