Suppressing the rhamnogalacturonan lyase gene FaRGLyase1 preserves RGI pectin degradation and enhances strawberry fruit firmness.

Plant rhamnogalacturonan lyases (RGLyases) cleave the backbone of rhamnogalacturonan I (RGI), the "hairy" pectin and polymer of the disaccharide rhamnose (Rha)-galacturonic acid (GalA) with arabinan, galactan or arabinogalactan side chains. It has been suggested that RGLyases could participate in remodeling cell walls during fruit softening, but clear evidence has not been reported. To investigate the role of RGLyases in strawberry softening, a genome-wide analysis of RGLyase genes in the genus Fragaria was performed. Seventeen genes encoding RGLyases with functional domains were identified in Fragaria × ananassa. FaRGLyase1 was the most expressed in the ripe receptacle of cv. Chandler. Transgenic strawberry plants expressing an RNAi sequence of FaRGLyase1 were obtained. Three transgenic lines yielded ripe fruits firmer than controls without other fruit quality parameters being significantly affected. The highest increase in firmness achieved was close to 32%. Cell walls were isolated from ripe fruits of two selected lines. The amount of water-soluble and chelated pectins was higher in transgenic lines than in the control. A carbohydrate microarray study showed a higher abundance of RGI epitopes in pectin fractions and in the cellulose-enriched fraction obtained from transgenic lines. Sixty-seven genes were differentially expressed in transgenic ripe fruits when compared with controls. These genes were involved in various physiological processes, including cell wall remodeling, ion homeostasis, lipid metabolism, protein degradation, stress response, and defense. The transcriptomic changes observed in FaRGLyase1 plants suggest that senescence was delayed in transgenic fruits.

CRISPR/Cas9 editing of the polygalacturonase FaPG1 gene improves strawberry fruit firmness.

Firmness is one of the most important fruit quality traits in strawberries. The postharvest shelf life of this soft fruit is highly limited by the loss of firmness, where cell wall disassembly plays an important role. Previous studies demonstrated that the polygalacturonase FaPG1 has a key role in remodelling pectins during strawberry softening. In this study, FaPG1 knockout strawberry plants have been generated using the CRISPR/Cas9 system delivered via Agrobacterium tumefaciens. Ten independent lines, cv. "Chandler", were obtained, and all of them were successfully edited as determined by PCR amplification and T7 endonuclease assay. The targeted mutagenesis insertion and deletion rates were analyzed using targeted deep sequencing. The percentage of edited sequences varied from 47% up to almost 100%, being higher than 95% for seven of the selected lines. Phenotypic analyses showed that 7 out of the eight lines analyzed produced fruits significantly firmer than the control, ranging from 33 to 70% increase in firmness. There was a positive relationship between the degree of FaPG1 editing and the rise in fruit firmness. Minor changes were observed in other fruit quality traits, such as colour, soluble solids, titratable acidity or anthocyanin content. Edited fruits showed a reduced softening rate during postharvest, displayed a reduced transpirational water loss, and were less damaged by Botrytis cinerea inoculation. The analysis of four potential off-target sites revealed no mutation events. In conclusion, editing the FaPG1 gene using the CRISPR/Cas9 system is an efficient method for improving strawberry fruit firmness and shelf life.

Elucidating the role of polygalacturonase genes in strawberry fruit softening.

To disentangle the role of polygalacturonase (PG) genes in strawberry softening, the two PG genes most expressed in ripe receptacles, FaPG1 and FaPG2, were down-regulated. Transgenic ripe fruits were firmer than those of the wild type when PG genes were silenced individually. Simultaneous silencing of both PG genes by transgene stacking did not result in an additional increase in firmness. Cell walls from ripe fruits were characterized by a carbohydrate microarray. Higher signals of homogalacturonan and rhamnogalacturonan I pectin epitopes in polysaccharide fractions tightly bound to the cell wall were observed in the transgenic genotypes, suggesting a lower pectin solubilization. At the transcriptomic level, the suppression of FaPG1 or FaPG2 alone induced few transcriptomic changes in the ripe receptacle, but the amount of differentially expressed genes increased notably when both genes were silenced. Many genes encoding cell wall-modifying enzymes were down-regulated. The expression of a putative high affinity potassium transporter was induced in all transgenic genotypes, indicating that cell wall weakening and loss of cell turgor could be linked. These results suggest that, besides the disassembly of pectins tightly linked to the cell wall, PGs could play other roles in strawberry softening, such as the release of oligogalacturonides exerting a positive feedback in softening.

QTL mapping of fruit mineral contents provides new chances for molecular breeding of tomato nutritional traits.

KEY MESSAGE: Agronomical characterization of a RIL population for fruit mineral contents allowed for the identification of QTL controlling these fruit quality traits, flanked by co-dominant markers useful for marker-assisted breeding. Tomato quality is a multi-variant attribute directly depending on fruit chemical composition, which in turn determines the benefits of tomato consumption for human health. Commercially available tomato varieties possess limited variability in fruit quality traits. Wild species, such as Solanum pimpinellifolium, could provide different nutritional advantages and can be used for tomato breeding to improve overall fruit quality. Determining the genetic basis of the inheritance of all the traits that contribute to tomato fruit quality will increase the efficiency of the breeding program necessary to take advantage of the wild species variability. A high-density linkage map has been constructed from a recombinant inbred line (RIL) population derived from a cross between tomato Solanum lycopersicum and the wild-relative species S. pimpinellifolium. The RIL population was evaluated for fruit mineral contents during three consecutive growing seasons. The data obtained allowed for the identification of main QTL and novel epistatic interaction among QTL controlling fruit mineral contents on the basis of a multiple-environment analysis. Most of the QTL were flanked by candidate genes providing valuable information for both tomato breeding for new varieties with novel nutritional properties and the starting point to identify the genes underlying these QTL, which will help to reveal the genetic basis of tomato fruit nutritional properties.

Identification, introgression, and validation of fruit volatile QTLs from a red-fruited wild tomato species.

Volatile organic compounds (VOCs) are major determinants of fruit flavor, a primary objective in tomato breeding. A recombinant inbred line (RIL) population consisting of 169 lines derived from a cross between Solanum lycopersicum and a red-fruited wild tomato species Solanum pimpinellifolium accession (SP) was characterized for VOCs in three different seasons. Correlation and hierarchical cluster analyses were performed on the 52 VOCs identified, providing a tool for the putative assignation of individual compounds to metabolic pathways. Quantitative trait locus (QTL) analysis, based on a genetic linkage map comprising 297 single nucleotide polymorphisms (SNPs), revealed 102 QTLs (75% not described previously) corresponding to 39 different VOCs. The SP alleles exerted a positive effect on most of the underlying apocarotenoid volatile QTLs-regarded as desirable for liking tomato-indicating that alleles inherited from SP are a valuable resource for flavor breeding. An introgression line (IL) population developed from the same parental genotypes provided 12 ILs carrying a single SP introgression and covering 85 VOC QTLs, which were characterized at three locations. The results showed that almost half of the QTLs previously identified in the RILs maintained their effect in an IL form, reinforcing the value of these QTLs for flavor/aroma breeding in cultivated tomato.

Multi-environment QTL mapping reveals genetic architecture of fruit cracking in a tomato RIL Solanum lycopersicum × S. pimpinellifolium population.

KEY MESSAGE: QTL and codominant genetic markers for fruit cracking have been identified in a tomato genetic map derived from a RIL population, providing molecular tools for marker-assisted breeding of this trait. In tomato, as well as in other fleshy fruits, one of the main disorders that widely limit quality and production is fruit cracking or splitting of the epidermis that is observed on the fruit skin and flesh at any stage of fruit growth and maturation. To elucidate the genetic basis of fruit cracking, a quantitative trait loci (QTL) analysis was conducted in a recombinant inbred line (RIL) population derived from a cross between tomato (Solanum lycopersicum) and the wild-relative species S. pimpinellifolium. The RIL population was evaluated for fruit cracking during three consecutive growing seasons. Construction of a high-density linkage map based on codominant markers, covering more than 1000 cM of the whole genome, led to the identification of both main and epistatic QTL controlling fruit cracking on the basis of a single-environment as well as multiple-environment analysis. This information will enhance molecular breeding for novel cracking resistant varieties and simultaneously assist the identification of genes underlying these QTL, helping to reveal the genetic basis of fruit cracking in tomato.

Interspecific reproductive barriers between sympatric populations of wild tomato species (Solanum section Lycopersicon).

PREMISE OF THE STUDY: Interspecific reproductive barriers (IRBs) often prevent hybridization between closely related species in sympatry. In the tomato clade (Solanum section Lycopersicon), interspecific interactions between natural sympatric populations have not been evaluated previously. In this study, we assessed IRBs between members of the tomato clade from nine sympatric sites in Peru. METHODS: Coflowering was assessed at sympatric sites in Peru. Using previously collected seeds from sympatric sites in Peru, we evaluated premating prezygotic (floral morphology), postmating prezygotic (pollen-tube growth), and postzygotic barriers (fruit and seed development) between sympatric species in common gardens. Pollen-tube growth and seed development were examined in reciprocal crosses between sympatric species. KEY RESULTS: We confirmed coflowering of sympatric species at five sites in Peru. We found three types of postmating prezygotic IRBs during pollen-pistil interactions: (1) unilateral pollen-tube rejection between pistils of self-incompatible species and pollen of self-compatible species; (2) potential conspecific pollen precedence in a cross between two self-incompatible species; and (3) failure of pollen tubes to target ovules. In addition, we found strong postzygotic IRBs that prevented normal seed development in 11 interspecific crosses, resulting in seed-like structures containing globular embryos and aborted endosperm and, in some cases, overgrown endothelium. Viable seed and F1 hybrid plants were recovered from three of 19 interspecific crosses. CONCLUSIONS: We have identified diverse prezygotic and postzygotic IRBs that would prevent hybridization between sympatric wild tomato species, but interspecific hybridization is possible in a few cases.

Exploring New Alleles Involved in Tomato Fruit Quality in an Introgression Line Library of Solanum pimpinellifolium.

We have studied a genomic library of introgression lines from the Solanum pimpinellifolium accession TO-937 into the genetic background of the "Moneymaker" cultivar in order to evaluate the accession's breeding potential. Overall, no deleterious phenotypes were observed, and the plants and fruits were phenotypically very similar to those of "Moneymaker," which confirms the feasibility of translating the current results into elite breeding programs. We identified chromosomal regions associated with traits that were both vegetative (plant vigor, trichome density) and fruit-related (morphology, organoleptic quality, color). A trichome-density locus was mapped on chromosome 10 that had not previously been associated with insect resistance, which indicates that the increment of trichomes by itself does not confer resistance. A large number of quantitative trait loci (QTLs) have been identified for fruit weight. Interestingly, fruit weight QTLs on chromosomes 1 and 10 showed a magnitude effect similar to that of QTLs previously defined as important in domestication and diversification. Low variability was observed for fruit-shape-related traits. We were, however, able to identify a QTL for shoulder height, although the effects were quite low, thus demonstrating the suitability of the current population for QTL detection. Regarding organoleptic traits, consistent QTLs were detected for soluble solid content (SSC). Interestingly, QTLs on chromosomes 2 and 9 increased SSC but did not affect fruit weight, making them quite promising for introduction in modern cultivars. Three ILs with introgressions on chromosomes 1, 2, and 10 increased the internal fruit color, making them candidates for increasing the color of modern cultivars. Comparing the QTL detection between this IL population and a recombinant inbred line population from the same cross, we found that QTL stability across generations depended on the trait, as it was very high for fruit weight but low for organoleptic traits. This difference in QTL stability may be due to a predominant additive gene action for QTLs involved in fruit weight, whereas epistatic and genetic background interactions are most likely important for the other traits.

Developmental onset of reproductive barriers and associated proteome changes in stigma/styles of Solanum pennellii.

Although self-incompatibility (SI) in plants has been studied extensively, far less is known about interspecific reproductive barriers. One interspecific barrier, known as unilateral incongruity or incompatibility (UI), occurs when species display unidirectional compatibility in interspecific crosses. In the wild tomato species Solanum pennellii, both SI and self-compatible (SC) populations express UI when crossed with domesticated tomato, offering a useful model system to dissect the molecular mechanisms involved in reproductive barriers. In this study, the timing of reproductive barrier establishment during pistil development was determined in SI and SC accessions of S. pennellii using a semi-in vivo system to track pollen-tube growth in developing styles. Both SI and UI barriers were absent in styles 5 days prior to flower opening, but were established by 2 days before flower opening, with partial barriers detected during a transition period 3-4 days before flower opening. The developmental expression dynamics of known SI factors, S-RNases and HT proteins, was also examined. The accumulation of HT-A protein coincided temporally and spatially with UI barriers in developing pistils. Proteomic analysis of stigma/styles from key developmental stages showed a switch in protein profiles from cell-division-associated proteins in immature stigma/styles to a set of proteins in mature stigma/styles that included S-RNases, HT-A protein and proteins associated with cell-wall loosening and defense responses, which could be involved in pollen-pistil interactions. Other prominent proteins in mature stigma/styles were those involved in lipid metabolism, consistent with the accumulation of lipid-rich material during pistil maturation.

Enabling proteomic studies with RNA-Seq: The proteome of tomato pollen as a test case.

Effective proteome profiling is generally considered to depend heavily on the availability of a high-quality DNA reference database. As such, proteomics has long been taxonomically restricted, with limited inroads being made into the proteomes of "non-model" organisms. However, next generation sequencing (NGS), and particularly RNA-Seq, now allows deep coverage detection of expressed genes at low cost, which in turn potentially facilitates the matching of peptide mass spectra with cognate gene sequence. To test this, we performed a quantitative analysis of the proteomes of pollen from domesticated tomato (Solanum lycopersicum) and two wild relatives that exhibit differences in mating systems and in interspecific reproductive barriers. Using a custom tomato RNA-Seq database created through 454 pyrosequencing, more than 1200 proteins were identified, with subsets showing expression differences between genotypes or in the accumulation of the corresponding transcripts. Importantly, no major qualitative or quantitative differences were observed in the characterized proteomes when mass spectra were used to interrogate either a highly curated community database of tomato sequences generated through traditional sequencing technologies, or the RNA-Seq database. We conclude that RNA-Seq provides a cost-effective and robust platform for protein identification and will be increasingly valuable to the field of proteomics.

Systems biology of tomato fruit development: combined transcript, protein, and metabolite analysis of tomato transcription factor (nor, rin) and ethylene receptor (Nr) mutants reveals novel regulatory interactions.

Tomato (Solanum lycopersicum) is an established model to study fleshy fruit development and ripening. Tomato ripening is regulated independently and cooperatively by ethylene and transcription factors, including nonripening (NOR) and ripening-inhibitor (RIN). Mutations of NOR, RIN, and the ethylene receptor Never-ripe (Nr), which block ethylene perception and inhibit ripening, have proven to be great tools for advancing our understanding of the developmental programs regulating ripening. In this study, we present systems analysis of nor, rin, and Nr at the transcriptomic, proteomic, and metabolomic levels during development and ripening. Metabolic profiling marked shifts in the abundance of metabolites of primary metabolism, which lead to decreases in metabolic activity during ripening. When combined with transcriptomic and proteomic data, several aspects of the regulation of metabolism during ripening were revealed. First, correlations between the expression levels of a transcript and the abundance of its corresponding protein were infrequently observed during early ripening, suggesting that posttranscriptional regulatory mechanisms play an important role in these stages; however, this correlation was much greater in later stages. Second, we observed very strong correlation between ripening-associated transcripts and specific metabolite groups, such as organic acids, sugars, and cell wall-related metabolites, underlining the importance of these metabolic pathways during fruit ripening. These results further revealed multiple ethylene-associated events during tomato ripening, providing new insights into the molecular biology of ethylene-mediated ripening regulatory networks.

Interspecific reproductive barriers in the tomato clade: opportunities to decipher mechanisms of reproductive isolation.

The tomato clade within the genus Solanum has numerous advantages for mechanistic studies of reproductive isolation. Its thirteen closely related species, along with four closely allied Solanum species, provide a defined group with diverse mating systems that display complex interspecific reproductive barriers. Several kinds of pre- and postzygotic barriers have already been identified within this clade. Well-developed genetic maps, introgression lines, interspecific bridging lines, and the newly available draft genome sequence of the domesticated tomato (Solanum lycopersicum) are valuable tools for the genetic analysis of interspecific reproductive barriers. The excellent chromosome morphology of these diploid species allows detailed cytological analysis of interspecific hybrids. Transgenic methodologies, well developed in the Solanaceae, allow the functional testing of candidate reproductive barrier genes as well as live imaging of pollen rejection events through the use of fluorescently tagged proteins. Proteomic and transcriptomics approaches are also providing new insights into the molecular nature of interspecific barriers. Recent progress toward understanding reproductive isolation mechanisms using these molecular and genetic tools is assessed in this review.

Multiple features that distinguish unilateral incongruity and self-incompatibility in the tomato clade.

Wild tomato species in Solanum Section Lycopersicon often exhibit two types of reproductive barriers: self-incompatibility (SI) and unilateral incompatibility or incongruity (UI), wherein the success of an inter-specific cross depends on the direction of the cross. UI pollen rejection often follows the 'SI × SC' rule, i.e. pistils of SI species reject the pollen of SC (self-compatible) species but not vice versa, suggesting that the SI and UI pollen rejection mechanisms may overlap. In order to address this question, pollen tube growth was measured after inter-specific crosses using wild tomato species as the female parents and pollen from cultivated tomato (Solanum lycopersicum). Two modes of UI pollen rejection, early and late, were observed, and both differed from SI pollen rejection. The structure and expression of known stylar SI genes were evaluated. We found that S-RNase expression is not required for either the early or late mode of UI pollen rejection. However, two HT family genes, HT-A and HT-B, map to a UI QTL. Surprisingly, we found that a gene previously implicated in SI, HT-B, is mutated in both SI and SC S. habrochaites accessions, and no HT-B protein could be detected. HT-A genes were detected and expressed in all species examined, and may therefore function in both SI and UI. We conclude that there are significant differences between SI and UI in the tomato clade, in that pollen tube growth differs between these two rejection systems, and some stylar SI factors, including S-RNase and HT-B, are not required for UI.

Viscoelastic nature of isolated tomato (Solanum lycopersicum) fruit cuticles: a mathematical model.

Viscoelastic behaviour of isolated tomato fruit cuticle (CM) is well known and extensively described. Temperature and hydration conditions modify the mechanical properties of CM. Mechanical data from previous transient-creep analysis developed in tomato fruit cuticle under different temperature and hydration conditions have been used to propose a rheological model that describes the viscoelastic nature of CM. As a composite material, the biomechanical behaviour of the plant cuticle will depend not only on the mechanical characteristics of the individual components by themselves but also on the sum of them. Based on this previous information, we proposed a two-element model to describe the experimental behaviour: an elastic hookean element connected in parallel to a viscous element or Voigt element that will describe the mechanical behaviour of the isolated CM and cutin under the studied conditions. The main parameters of the model, E(1) and E(2) will reflect the elastic and viscoelastic behaviour of the cuticle. Relationship between these physical parameters and the change in CM properties were discussed in order to elucidate the rheological processes taking place in CM. This model describes both the influence of temperature and hydration and the behaviour of the isolated cutin and the inferred contribution of the cuticle fraction of polysaccharides when the whole cuticle is tested.

Biomechanics of isolated tomato (Solanum lycopersicum) fruit cuticles during ripening: the role of flavonoids.

Flavonoids accumulate in tomato (Solanum lycopersicum L.) fruit cuticles during ripening. Their quantitative contribution to the biomechanical properties of the cuticle is studied in six tomato genotypes which show presence or absence of these compounds at the red ripe stage of fruit development. Tomato cuticles with flavonoids at red ripe showed a dramatic increase of these compounds between mature green and red ripe stages together with a significant increase in the elastic modulus. On the other hand, cuticles without flavonoids displayed a similar biomechanical behaviour at mature green and red ripe stages. The absence of flavonoids could also be related with a predominance of the viscoelastic performance of the cuticle. Thus, the increase of phenolics in tomato fruit cuticles during ripening is correlated with a more rigid cutin network that reinforces the mechanical function of polysaccharides which tend to diminish at this stage due to cell wall disassembly. A role of phenolics as biomechanical modulators of the cuticle behaviour is proposed.

Plant glycosyl hydrolases and biofuels: a natural marriage.

Much of what is currently known about the structure, properties and biochemical activities of glycosyl hydrolases (GHs) has resulted from detailed studies of microbial enzymes. Conversely, such information is sparse in the plant GH literature, where the focus has traditionally been on studying expression and biological function. However, the current resurgence of interest in lignocellulosic biofuels is catalyzing new interest in this field, and recent reports suggest that some plant GH families have more in common with their microbial counterparts than was previously suspected. The repertoires of plant GHs, with their associated catalytic activities and polysaccharide binding affinities, may have valuable applications in modifying plant cell wall architecture and in the development and characterization of new bioenergy feedstocks.

Development of fruit cuticle in cherry tomato (Solanum lycopersicum).

The cuticle of a plant plays an important role in many physiological events of fruit development and ripening. Despite this, little is known about cuticle formation and development. We include a detailed morphological study at the microscopic level of cuticle during fruit growth and ripening using tomato as a fruit model. In addition, a study of the differences in cuticle thickness and composition during development is included. The four genotypes studied in this work showed a similar timing of the main morphological events: initiation of epidermal differentiation, changes in the distribution of the lipid, pectin and cellulose material within the cuticle, appearance of pegs, beginning of cuticle invaginations, maximum thickness and loss of polysaccharidic material. Fruit growth, measured by fruit diameter, showed a positive correlation with the increase of cuticle thickness and the amount of cuticle and their cutin and polysaccharide components per fruit unit during development. By contrast, cuticle waxes showed a different behaviour. Two important characteristics of cuticle growth were observed during tomato fruit development. First, the amount of cuticle per surface area reached its maximum in the first 15 days after anthesis and remained more or less constant until ripening. Second, there was a significant loss of polysaccharidic material from the beginning of ripening (breaker stage) to full red ripe.

Biomechanics of isolated tomato (Solanum lycopersicum L.) fruit cuticles: the role of the cutin matrix and polysaccharides.

The mechanical characteristics of the cuticular membrane (CM), a complex composite biopolymer basically composed of a cutin matrix, waxes, and hydrolysable polysaccharides, have been described previously. The biomechanical behaviour and quantitative contribution of cutin and polysaccharides have been investigated here using as experimental material mature green and red ripe tomato fruits. Treatment of isolated CM with anhydrous hydrogen fluoride in pyridine allowed the selective elimination of polysaccharides attached to or incrusted into the cutin matrix. Cutin samples showed a drastic decrease in elastic modulus and stiffness (up to 92%) compared with CM, which clearly indicates that polysaccharides incorporated into the cutin matrix are responsible for the elastic modulus, stiffness, and the linear elastic behaviour of the whole cuticle. Reciprocally, the viscoelastic behaviour of CM (low elastic modulus and high strain values) can be assigned to the cutin. These results applied both to mature green and red ripe CM. Cutin elastic modulus, independently of the degree of temperature and hydration, was always significantly higher for the ripe than for the green samples while strain was lower; the amount of phenolics in the cutin network are the main candidates to explain the increased rigidity from mature green to red ripe cutin. The polysaccharide families isolated from CM were pectin, hemicellulose, and cellulose, the main polymers associated with the plant cell wall. The three types of polysaccharides were present in similar amounts in CM from mature green and red ripe tomatoes. Physical techniques such as X-ray diffraction and Raman spectroscopy indicated that the polysaccharide fibres were mainly randomly oriented. A tomato fruit CM scenario at the supramolecular level that could explain the observed CM biomechanical properties is presented and discussed.

Relative humidity and temperature modify the mechanical properties of isolated tomato fruit cuticles.

The mechanical properties of enzymatically isolated cuticular membrane (CM) from ripe tomato fruits were investigated at 10 to 45°C and relative humidity (RH) of 40 to wet. CM samples were stressed by uniaxial tension loads to determine their tensile modulus, E, breaking stress (strength), σ(max), and maximum elongation, ε(max). The CM stress-strain curves revealed a biphasic behavior when tested at RH values below wet conditions. In the first phase, CM responded to the loads by instantaneous extension with no further extension recorded until a further load was added: defined as pure elastic strain (E(e)). In the second phase, CM responded by instantaneous extension and by some additional time-dependent extension, defined as viscoelastic strain (E(v)). When CMs were submerged in aqueous solution (wet), the stress-strain curves were monophasic, with both elastic and viscoelastic strain. E(e) depended on RH and was higher than E(v), which was independent of RH. Temperature decreased E(e) and σ(max) of tomato fruit CM. Temperature response was not linear but consisted of two temperature-independent phases separated by a transition temperature. This transition zone has been related previously to the presence of a secondary phase transition in the cutin matrix of the tomato fruit CM.