A biomimetic synthetic feeder layer supports the proliferation and self-renewal of mouse embryonic stem cells.

UNLABELLED: Successful realization of the enormous potential of pluripotent stem cells in regenerative medicine demands the development of well-defined culture conditions. Maintenance of embryonic stem cells (ESCs) typically requires co-culture with feeder layer cells, generally mouse embryonic fibroblasts (MEFs). Concerns about xenogeneic pathogen contamination and immune reaction to feeder cells underlie the need for ensuring the safety and efficacy of future stem cell-based products through the development of a controlled culture environment. To gain insight into the effectiveness of MEF layers, here we have developed a biomimetic synthetic feeder layer (BSFL) that is acellular and replicates the stiffness and topography of MEFs. The mechanical properties of MEFs were measured using atomic force microscopy. The average Young's modulus of the MEF monolayers was replicated using tunable polyacrylamide (PA) gels. BSFLs replicated topographical features of the MEFs, including cellular, subcellular, and cytoskeletal features. On BSFLs, mouse ESCs adhered and formed compact round colonies; similar to on MEF controls but not on Flat PA. ESCs on BSFLs maintained their pluripotency and self-renewal across passages, formed embryoid bodies and differentiated into progenitors of the three germ layers. This acellular biomimetic synthetic feeder layer supports stem cell culture without requiring co-culture of live xenogeneic feeder cells, and provides a versatile, tailorable platform for investigating stem cell growth. STATEMENT OF SIGNIFICANCE: Embryonic stem cells have enormous potential to aid therapeutics, because they can renew themselves and become different cell types. This study addresses a key challenge for ESC use - growing them safely for human patients. ESCs typically grow with a feeder layer of mouse fibroblasts. Since patients have a risk of immune response to feeder layer cells, we have developed a material to mimic the feeder layer and eliminate this risk. We investigated the influence of feeder layer topography and stiffness on mouse ESCs. While the biomimetic synthetic feeder layer contains no live cells, it replicates the stiffness and topography of feeder layer cells. Significantly, ESCs grown on BSFLs retain their abilities to grow and become multiple cell types.

Loss-of-Function of HtrA1 Abrogates All-Trans Retinoic Acid-Induced Osteogenic Differentiation of Mouse Adipose-Derived Stromal Cells Through Deficiencies in p70S6K Activation.

All-trans retinoic acid (ATRA) is a potent inducer of osteogenic differentiation in mouse adipose-derived stromal cells (mASCs), although the underlying mechanisms responsible for its mode of action have yet to be completely elucidated. High temperature requirement protease A1 (HtrA1) is a newly recognized modulator of human multipotent stromal cell (MSC) osteogenesis and as such, may play a role in regulating ATRA-dependent osteogenic differentiation of mASCs. In this study, we assessed the influence of small interfering RNA (siRNA)-induced repression of HtrA1 production on mASC osteogenesis and examined its effects on ATRA-mediated mammalian target of rapamycin (mTOR) signaling. Inhibition of HtrA1 production in osteogenic mASCs resulted in a significant reduction of alkaline phosphatase activity and mineralized matrix formation. Western blot analyses revealed the rapid activation of Akt (Ser473) and p70S6K (Thr389) in ATRA-treated mASCs, and that levels of phosphorylated p70S6K were noticeably reduced in HtrA1-deficient mASCs. Further studies using mTOR inhibitor rapamycin and siRNA specific for the p70S6K gene Rps6kb1 confirmed ATRA-mediated mASC osteogenesis as being dependent on p70S6K activation. Finally, transfection of cells with a constitutively active rapamycin-resistant p70S6K mutant could restore the mineralizing capacity of HtrA1-deficient mASCs. These findings therefore lend further support for HtrA1 as a positive mediator of MSC osteogenesis and provide new insights into the molecular mode of action of ATRA in regulating mASC lineage commitment.

Three-dimensional traction forces of Schwann cells on compliant substrates.

The mechanical interaction between Schwann cells (SCs) and their microenvironment is crucial for the development, maintenance and repair of the peripheral nervous system. In this paper, we present a detailed investigation on the mechanosensitivity of SCs across a physiologically relevant substrate stiffness range. Contrary to many other cell types, we find that the SC spreading area and cytoskeletal actin architecture were relatively insensitive to substrate stiffness with pronounced stress fibre formation across all moduli tested (0.24-4.80 kPa). Consistent with the presence of stress fibres, we found that SCs generated large surface tractions on stiff substrates and large, finite material deformations on soft substrates. When quantifying the three-dimensional characteristics of the SC traction profiles, we observed a significant contribution from the out-of-plane traction component, locally giving rise to rotational moments similar to those observed in mesenchymal embryonic fibroblasts. Taken together, these measurements provide the first set of quantitative biophysical metrics of how SCs interact with their physical microenvironment, which are anticipated to aid in the development of tissue engineering scaffolds designed to promote functional integration of SCs into post-injury in vivo environments.

High resolution, large deformation 3D traction force microscopy.

Traction Force Microscopy (TFM) is a powerful approach for quantifying cell-material interactions that over the last two decades has contributed significantly to our understanding of cellular mechanosensing and mechanotransduction. In addition, recent advances in three-dimensional (3D) imaging and traction force analysis (3D TFM) have highlighted the significance of the third dimension in influencing various cellular processes. Yet irrespective of dimensionality, almost all TFM approaches have relied on a linear elastic theory framework to calculate cell surface tractions. Here we present a new high resolution 3D TFM algorithm which utilizes a large deformation formulation to quantify cellular displacement fields with unprecedented resolution. The results feature some of the first experimental evidence that cells are indeed capable of exerting large material deformations, which require the formulation of a new theoretical TFM framework to accurately calculate the traction forces. Based on our previous 3D TFM technique, we reformulate our approach to accurately account for large material deformation and quantitatively contrast and compare both linear and large deformation frameworks as a function of the applied cell deformation. Particular attention is paid in estimating the accuracy penalty associated with utilizing a traditional linear elastic approach in the presence of large deformation gradients.

Navigating neurites utilize cellular topography of Schwann cell somas and processes for optimal guidance.

The path created by aligned Schwann cells (SCs) after nerve injury underlies peripheral nerve regeneration. We developed geometric bioinspired substrates to extract key information needed for axon guidance by deconstructing the topographical cues presented by SCs. We have previously reported materials that directly replicate SC topography with micro- and nanoscale resolution, but a detailed explanation of the means of directed axon extension on SC topography has not yet been described. Here, using neurite tracing and time-lapse microscopy, we analyzed the SC features that influence axon guidance. Novel poly(dimethylsiloxane) materials, fabricated via photolithography, incorporated bioinspired topographical components with the shapes and sizes of aligned SCs, namely somas and processes, where the lengths of the processes were varied but the soma geometry and dimensions were kept constant. Rat dorsal root ganglia neurites aligned to all materials presenting bioinspired topography after 5days in culture and aligned to bioinspired materials presenting soma and process features after only 17h in culture. The key findings of this study were: neurite response to underlying bioinspired topographical features was time dependent, with neurites aligned most strongly to materials presenting combinations of soma and process features at 5days, with higher than average density of either process or soma features, but at 17h they aligned more strongly to materials presenting average densities of soma and process features and to materials presenting process features only. These studies elucidate the influence of SC topography on axon guidance in a time-dependent setting and have implications for the optimization of nerve regeneration strategies.

Neurite outgrowth at the biomimetic interface.

Understanding the cues that guide axons and how we can optimize these cues to achieve directed neuronal growth is imperative for neural tissue engineering. Cells in the local environment influence neurons with a rich combination of cues. This study deconstructs the complex mixture of guidance cues by working at the biomimetic interface--isolating the topographical information presented by cells and determining its capacity to guide neurons. We generated replica materials presenting topographies of oriented astrocytes (ACs), endothelial cells (ECs), and Schwann cells (SCs) as well as computer-aided design materials inspired by the contours of these cells (bioinspired-CAD). These materials presented distinct topographies and anisotropies and in all cases were sufficient to guide neurons. Dorsal root ganglia (DRG) cells and neurites demonstrated the most directed response on bioinspired-CAD materials which presented anisotropic features with 90 degrees edges. DRG alignment was strongest on SC bioinspired-CAD materials followed by AC bioinspired-CAD materials, with more uniform orientation to EC bioinspired-CAD materials. Alignment on replicas was strongest on SC replica materials followed by AC and EC replicas. These results suggest that the topographies of anisotropic tissue structures are sufficient for neuronal guidance. This work is discussed in the context of feature dimensions, morphology, and guidepost hypotheses.

Asbestos exposure predicts cell cycle control gene promoter methylation in pleural mesothelioma.

Malignant pleural mesothelioma (MPM) is a rapidly fatal tumor with increasing incidence worldwide responsible for many thousands of deaths annually. Although there is a clear link between exposure to asbestos and mesothelioma, and asbestos is known to be both clastogenic and cytotoxic to mesothelial cells, the mechanisms of causation of MPM remain largely unknown. However, there is a rapidly emerging literature that describes inactivation of a diverse array of tumor suppressor genes (TSGs) via promoter DNA CpG methylation in MPM, although the etiology of these alterations remains unclear. We studied the relationships among promoter methylation silencing, asbestos exposure, patient demographics and tumor histology using a directed approach; examining six cell cycle control pathway TSGs in an incident case series of 70 MPMs. Promoter hypermethylation of APC, CCND2, CDKN2A, CDKN2B, HPPBP1 and RASSF1 were assessed. We observed significantly higher lung asbestos body burden if any of these cell cycle genes were methylated (P < 0.02), and there was a significant trend of increasing asbestos body counts as the number of methylated cell cycle pathway genes increased from 0 to 1 to >1 (P < 0.005). This trend of increasing asbestos body count and increasing number of methylated cell cycle pathway genes remained significant (P < 0.05) after controlling for age, gender and tumor histology. These data suggest a novel tumorigenic mechanism of action of asbestos and may contribute to the understanding of precisely how asbestos exposure influences the etiology and clinical course of malignant mesothelioma.