Elucidating Individual Magnetic Contributions in Bi-Magnetic Fe3 O4 /Mn3 O4 Core/Shell Nanoparticles by Polarized Powder Neutron Diffraction.

Heterogeneous bi-magnetic nanostructured systems have had a sustained interest during the last decades owing to their unique magnetic properties and the wide range of derived potential applications. However, elucidating the details of their magnetic properties can be rather complex. Here, a comprehensive study of Fe3 O4 /Mn3 O4 core/shell nanoparticles using polarized neutron powder diffraction, which allows disentangling the magnetic contributions of each of the components, is presented. The results show that while at low fields the Fe3 O4 and Mn3 O4 magnetic moments averaged over the unit cell are antiferromagnetically coupled, at high fields, they orient parallel to each other. This magnetic reorientation of the Mn3 O4 shell moments is associated with a gradual evolution with the applied field of the local magnetic susceptibility from anisotropic to isotropic. Additionally, the magnetic coherence length of the Fe3 O4 cores shows some unusual field dependence due to the competition between the antiferromagnetic interface interaction and the Zeeman energies. The results demonstrate the great potential of the quantitative analysis of polarized neutron powder diffraction for the study of complex multiphase magnetic materials.

Multifunctional TiO2 coatings developed by plasma electrolytic oxidation technique on a Ti20Nb20Zr4Ta alloy for dental applications.

A newly developed ß-Ti alloy based on the Ti-Nb-Zr-Ta system (Ti20Nb20Zr4Ta) has been subjected to Plasma Electrolytic Oxidation (PEO) treatment to obtain a multifunctional ceramic-like (TiO2) coating with superior tribocorrosion (wear and corrosion) resistance and improved biocompatibility. For this aim, elements such as Ca, P, and Ag NPs have been incorporated into the oxide film to obtain bioactive and biocide properties. The chemical composition and morphology of the TiO2-PEO coating was characterized, and its multifunctionality was addressed by several means, including antibacterial activity assessment, formation of bone-like apatite, metallic ion release evaluation, in vitro cellular response analysis, and corrosion and tribocorrosion tests in artificial saliva. The developed coatings enhanced the corrosion and tribocorrosion resistance of the bare alloy and exhibited antibacterial ability with low cytotoxicity and negligible ion release. Furthermore, they were able to sustain MC3T3-E1 preosteoblast viability/proliferation and osteogenic differentiation. Altogether, the results obtained demonstrate the potential of the TiO2 coating incorporating Ca, P, and Ag NPs to be used for dental applications.

Electron energy-loss spectroscopic tomography of FexCo(3-x)O4 impregnated Co3O4 mesoporous particles: unraveling the chemical information in three dimensions.

Electron energy-loss spectroscopy-spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FexCo(3-x)O4/Co3O4 ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal.

Numerical simulations of the Richtmyer-Meshkov instability in solid-vacuum interfaces using calibrated plasticity laws.

The Richtmyer-Meshkov instability of interfaces separating elastic-plastic materials from vacuum (heavy-light configuration) is studied by means of computational techniques. A fully Eulerian multimaterial algorithm that solves consistently the Euler equations and the time evolution of the deformations in the material is applied to three distinct materials (copper, aluminum, and stainless steel). If a perfectly plastic constitutive relation is considered, an empirical law is computed that relates the long-term perturbation amplitude of the interface, its maximum growth rate, the initial density, and the yield stress of the material. It is shown that this linear relation can be extended to materials that follow more complex plastic behavior which can account for rate dependency, hardening, and thermal softening, and to situations in which small-perturbation theory is no longer valid. In effect, the yield stress computed from measurements of the long-term amplitude and maximum growth rate closely matches the von Mises stress found at the interface of solid materials for a wide range of cases with different initial parameters.

Robust antiferromagnetic coupling in hard-soft bi-magnetic core/shell nanoparticles.

The growing miniaturization demand of magnetic devices is fuelling the recent interest in bi-magnetic nanoparticles as ultimate small components. One of the main goals has been to reproduce practical magnetic properties observed so far in layered systems. In this context, although useful effects such as exchange bias or spring magnets have been demonstrated in core/shell nanoparticles, other interesting key properties for devices remain elusive. Here we show a robust antiferromagnetic (AFM) coupling in core/shell nanoparticles which, in turn, leads to the foremost elucidation of positive exchange bias in bi-magnetic hard-soft systems and the remarkable regulation of the resonance field and amplitude. The AFM coupling in iron oxide-manganese oxide based, soft/hard and hard/soft, core/shell nanoparticles is demonstrated by magnetometry, ferromagnetic resonance and X-ray magnetic circular dichroism. Monte Carlo simulations prove the consistency of the AFM coupling. This unique coupling could give rise to more advanced applications of bi-magnetic core/shell nanoparticles.

Strongly exchange coupled inverse ferrimagnetic soft/hard, Mn(x)Fe(3-x)O4/Fe(x)Mn(3-x)O4, core/shell heterostructured nanoparticles.

Inverted soft/hard, in contrast to conventional hard/soft, bi-magnetic core/shell nanoparticles of Mn(x)Fe(3-x)O(4)/Fe(x)Mn(3-x)O(4) with two different core sizes (7.5 and 11.5 nm) and fixed shell thickness (∼0.6 nm) have been synthesized. The structural characterization suggests that the particles have an interface with a graded composition. The magnetic characterization confirms the inverted soft/hard structure and evidences a strong exchange coupling between the core and the shell. Moreover, larger soft core sizes exhibit smaller coercivities and loop shifts, but larger blocking temperatures, as expected from spring-magnet or graded anisotropy structures. The results indicate that, similar to thin film systems, the magnetic properties of soft/hard core/shell nanoparticles can be fine tuned to match specific applications.

Distinguishing the core from the shell in MnO(x)/MnO(y) and FeO(x)/MnO(x) core/shell nanoparticles through quantitative electron energy loss spectroscopy (EELS) analysis.

The structural and chemical characterization of inverted bi-magnetic MnO(x)(antiferromagnetic)/MnO(y)(ferrimagnetic) and FeO(x)(soft-ferrimagnetic)/MnO(x)(hard-ferrimagnetic) core/shell nanoparticles has been carried out by means of scanning transmission electron microscopy with electron energy loss spectroscopy analysis, (S)TEM-EELS. Quantitative EELS was applied to assess the local composition of the nanoparticles by evaluating the local Mn oxidation state based on the Mn L3/L2 peak intensity ratio and the Mn L3 peak onset. The analysis allows to unambiguously distinguish the core from the shell and to determine the nature of the involved manganese oxides in both cases. The results evidence that the structure of the nanoparticles is, in fact, more complex than the one designed by the synthesis parameters.

Linearized Richtmyer-Meshkov flow analysis for impulsively accelerated incompressible solids.

We present an analytical study of the linearized impulsive Richtmyer-Meshkov flow for incompressible elastic solids. Seminumerical prior investigations of a related shock-driven compressible elastic problem suggest that the interface amplitude remains bounded in time, in contrast to the unstable behavior found for gases. Our approach considers a base unperturbed flow and a linearization of the conservation equations around the base solution. The resulting initial and boundary value problem is solved using Laplace transform techniques. Analysis of the singularities of the resultant function in the Laplace domain allows us to perform a parametric study of the behavior of the interface in time. We identify two differentiated long-term patterns for the interface, which depends on the material properties: standing wave and oscillating decay. Finally, we present results for the vorticity distribution, which show that the shear stiffness of the solids is responsible both for the stabilization of the interface, and also for the period of the interface oscillations. Comparisons with previous results are discussed.

Magnetic proximity effect features in antiferromagnetic/ferrimagnetic core-shell nanoparticles.

A study of "inverted" core-shell, MnO/gamma-Mn(2)O(3), nanoparticles is presented. Crystal and magnetic structures and characteristic sizes have been determined by neutron diffraction for the antiferromagnetic core (MnO) and the ferrimagnetic shell (gamma-Mn(2)O(3)). Remarkably, while the MnO core is found to have a T_{N} not far from its bulk value, the magnetic order of the gamma-Mn(2)O(3) shell is stable far above T_{C}, exhibiting two characteristic temperatures, at T approximately 40 K [T_{C}(gamma-Mn(2)O(3))] and at T approximately 120 K [ approximately T_{N}(MnO)]. Magnetization measurements are consistent with these results. The stabilization of the shell moment up to T_{N} of the core can be tentatively attributed to core-shell exchange interactions, hinting at a possible magnetic proximity effect.

Fibrin glue as adjuvant treatment for gastrocutaneous fistula after gastrostomy tube removal.

Gastrocutaneous fistulas are infrequent after gastrostomy tube removal. However, if the fistulous tract remains permeable, even low-volume output can produce significant cutaneous burns. The use of biodegradable adhesives has been described, where fibrin glue is applied directly over the fistulous tract or under the guidance of procedures such as upper or lower gastrointestinal endoscopy or fistuloscopy. We studied the use of fibrin glue in five consecutive adult patients with gastrocutaneous fistulas after gastrostomy tube removal, with no complications that might impede spontaneous closure. A comparison group included seven patients treated during the preceding 2 years with conservative medical management, who were not treated with fibrin glue. There was no difference between the two groups with regard to age and gender, nor with regard to type of gastrostomy (surgical or endoscopic). The mean output volume from the fistulas was 151.4 +/- 146.1 ml/24 h in the study group and 115.0 +/- 42.7 ml/24 h in the control group, which was not significantly different ( P = 0.80). The duration of previous conservative treatment was 93.8 +/- 85.1 days for the study group and 95.8 +/- 80.7 days for the control group and this also did not differ significantly ( P = 0.93). The time to achieve total fistula closure was 7.0 +/- 3.1 days in the study group and 32.7 +/- 15.7 days in the control group. This difference was statistically significant ( P < 0.004). The time required before oral feeding could be recommenced after spontaneous or induced closure was similar in the two groups, at 2.8 +/- 1.3 days and 4.71 +/- 2.36 days, respectively. Endoscopic guidance allows direct instillation of fibrin glue via the external opening through the whole fistulous tract. This procedure reduces the time required for the closure of gastrocutaneous fistulas.

The growth of brown adipose tissue in cold-acclimatized rats after depletion of mast cell histamine by compound 48/80.

Cold acclimatization (4-5 degree C) is accompanied by 2-3 fold increase of brown adipose tissue (BAT). This rapid growth of interscapular BAT was studied after histamine depletion. In control rats maintained at room temperature (28 +/- 2 degree C) the BAT histamine content was 23.4 +/- 5.9 (mean +/- SD) microgram/g of tissue and cold acclimatization (5 +/- 1 degree C) produced a significant increase of BAT weight, but reduced the histamine content to 8.4 +/- 1.9 microgram/g. The total weight of BAT after 20 days of acclimatization was unaffected by depletion of histamine due to compound 48/80. The low level of histamine in BAT of cold acclimatized rats could be due to a fast rate of amine utilization; alternatively an altered synthesis or storage process may occur during acclimatization.