Lipopolysaccharide induced conversion of recombinant prion protein.

The conformational conversion of the cellular prion protein (PrP(C)) to the ß-rich infectious isoform PrP(Sc) is considered a critical and central feature in prion pathology. Although PrP(Sc) is the critical component of the infectious agent, as proposed in the "protein-only" prion hypothesis, cellular components have been identified as important cofactors in triggering and enhancing the conversion of PrP(C) to proteinase K resistant PrP(Sc). A number of in vitro systems using various chemical and/or physical agents such as guanidine hydrochloride, urea, SDS, high temperature, and low pH, have been developed that cause PrP(C) conversion, their amplification, and amyloid fibril formation often under non-physiological conditions. In our ongoing efforts to look for endogenous and exogenous chemical mediators that might initiate, influence, or result in the natural conversion of PrP(C) to PrP(Sc), we discovered that lipopolysaccharide (LPS), a component of gram-negative bacterial membranes interacts with recombinant prion proteins and induces conversion to an isoform richer in ß sheet at near physiological conditions as long as the LPS concentration remains above the critical micelle concentration (CMC). More significant was the LPS mediated conversion that was observed even at sub-molar ratios of LPS to recombinant ShPrP (90-232).

Excited state photoreaction between the indole side chain of tryptophan and halocompounds generates new fluorophores and unique modifications.

Photoreaction of indole containing compounds with chloroform and other trichlorocompounds generates products with redshifted fluorescence. In proteins, this reaction can be used for the fluorescent detection of proteins. Little characterization of products generated through the photochemical reaction of indoles with halocompounds has been done, yet is fundamental for the development of other fluorophores, protein labeling agents, and bioactive indole derivatives. Here, we have characterized which isomers form in the photoreaction between tryptophan and chloroform using (1)H-NMR of tryptophan and methylated derivatives to reveal that the two major products that are formed result from modification at the 4- and 6-carbon positions of the indole ring. Reaction at position 6 generates 6-formyl tryptophan and the reaction at position 4 generates an imine because the formyl derivative that is initially formed reacts further with the tryptophan amine group. The spectroscopic properties and product molecular weights of photoproducts formed from photoreaction of tryptophan with other trihalo and monohalocompounds are also determined. The indole ring of tryptophan can be modified with various additions from halocompounds, including the addition of labels to the indole ring via methylene groups. This opens possibilities for generating novel tryptophan based fluorophores and protein labeling strategies using this photochemistry.

Unique Photobleaching Phenomena of the Twin-Arginine Translocase Respiratory Enzyme Chaperone DmsD.

DmsD is a chaperone of the redox enzyme maturation protein family specifically required for biogenesis of DMSO reductase in Escherichia coli. It exists in multiple folding forms, all of which are capable of binding its known substrate, the twin-arginine leader sequence of the DmsA catalytic subunit. It is important for maturation of the reductase and targeting to the cytoplasmic membrane for translocation. Here, we demonstrate that DmsD exhibits an irreversible photobleaching phenomenon upon 280 nm excitation irradiation. The phenomenon is due to quenching of the tryptophan residues in DmsD and is dependent on its folding and conformation. We also show that a tryptophan residue involved in DmsA signal peptide binding (W87) is important for photobleaching of DmsD. Mutation of W87, or binding of the DmsA twin-arginine signal peptide to DmsD in the pocket that includes W72, W80, and W91 significantly affects the degree of photobleaching. This study highlights the advantage of a photobleaching phenomenon to study protein folding and conformation changes within a protein that was once considered unusable in fluorescence spectroscopy.

Resolution-enhanced native acidic gel electrophoresis: a method for resolving, sizing, and quantifying prion protein oligomers.

The formation of ß-sheet-rich prion protein (PrP(ß)) oligomers from native or cellular PrP(c) is thought to be a key step in the development of prion diseases. To assist in this characterization process we have developed a rapid and remarkably high resolution gel electrophoresis technique called RENAGE (resolution-enhanced native acidic gel electrophoresis) for separating, sizing, and quantifying oligomeric PrP(ß) complexes. PrP(ß) oligomers formed via either urea/salt or acid conversion can be resolved by RENAGE into a clear set of oligomeric bands differing by just one subunit. Calibration of the size of the PrP(ß) oligomer bands was made possible with a cross-linked mouse PrP(90-232) ladder (1- to 11-mer) generated using ruthenium bipyridyl-based photoinduced cross-linking of unmodified proteins (PICUP). This PrP PICUP ladder allowed the size and abundance of PrP(ß) oligomers formed from urea/salt and acid conversion to be determined. This distribution consists of 7-, 8-, 9-, 10-, and 11-mers, with the most abundant species being the 8-mer. The high-resolution separation afforded by RENAGE has allowed us to investigate distinctive size and population changes in PrP(ß) oligomers formed under various conversion conditions, with various construct lengths, from various species or in the presence of anti-prion compounds.

Stacked sets of parallel, in-register beta-strands of beta2-microglobulin in amyloid fibrils revealed by site-directed spin labeling and chemical labeling.

beta(2)-microglobulin (beta(2)m) is a 99-residue protein with an immunoglobulin fold that forms beta-sheet-rich amyloid fibrils in dialysis-related amyloidosis. Here the environment and accessibility of side chains within amyloid fibrils formed in vitro from beta(2)m with a long straight morphology are probed by site-directed spin labeling and accessibility to modification with N-ethyl maleimide using 19 site-specific cysteine variants. Continuous wave electron paramagnetic resonance spectroscopy of these fibrils reveals a core predominantly organized in a parallel, in-register arrangement, by contrast with other beta(2)m aggregates. A continuous array of parallel, in-register beta-strands involving most of the polypeptide sequence is inconsistent with the cryoelectron microscopy structure, which reveals an architecture based on subunit repeats. To reconcile these data, the number of spins in close proximity required to give rise to spin exchange was determined. Systematic studies of a model protein system indicated that juxtaposition of four spin labels is sufficient to generate exchange narrowing. Combined with information about side-chain mobility and accessibility, we propose that the amyloid fibrils of beta(2)m consist of about six beta(2)m monomers organized in stacks with a parallel, in-register array. The results suggest an organization more complex than the accordion-like beta-sandwich structure commonly proposed for amyloid fibrils.

Development of indole chemistry to label tryptophan residues in protein for determination of tryptophan surface accessibility.

Solvent accessibility can be used to evaluate protein structural models, identify binding sites, and characterize protein conformational changes. The differential modification of amino acids at specific sites enables the accessible surface residues to be identified by mass spectrometry. Tryptophan residues within proteins can be differentially labeled with halocompounds by a photochemical reaction. In this study, tryptophan residues of carbonic anhydrase are reacted with chloroform, 2,2,2-trichloroethanol (TCE), 2,2,2-trichloroacetate (TCA), or 3-bromo-1-propanol (BP) under UV irradiation at 280 nm. The light-driven reactions with chloroform, TCE, TCA, and BP attach a formyl, hydroxyethanone, carboxylic acid, and propanol group, respectively, onto the indole ring of tryptophan. Trypsin and chymotrypsin digests of the modified carbonic anhydrase are used to map accessible tryptophan residues using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Tryptophan reactivity is determined by identifying peptides with tryptophan residues modified with the appropriate label. The reactivity is calculated from the frequency that the modification is identified and a semiquantitative measure of the amount of products formed. Both of these measures of tryptophan reactivity correlate significantly with the accessible surface area of tryptophan residues in carbonic anhydrase determined from the X-ray crystal structure. Therefore the photochemical reaction of halocompounds with tryptophan residues in carbonic anhydrase indicates the degree of solvent accessibility of these residues.

Identification of trichloroethanol visualized proteins from two-dimensional polyacrylamide gels by mass spectrometry.

Proteins visualized by 2,2,2-trichloroethanol (TCE) on two-dimensional electrophoresis gels are efficiently identified by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry (MS) and MS/MS. In a previous study, a method was developed that placed TCE in the polyacrylamide gel so that protein bands can be visualized without staining in less than 5 min. A visible fluorophore is generated by reaction of TCE with tryptophan that allows for protein visualization. In this study, MALDI-TOF MS and LC-MS/MS are used to identify randomly selected Escherichia coli proteins. The identification of TCE visualized proteins is compared to the identification of Coomassie brilliant blue (CBB) stained proteins from two-dimensional gel electrophoresis of E. coli proteins. This study demonstrated that TCE visualized proteins are compatible with protein identification by MALDI-TOF peptide mass fingerprinting. For 10 randomly selected spots, TCE visualization lead to statistically significant identification of 5 proteins and CBB visualization lead to identification of 6 proteins. TCE visualized proteins are also shown to be well suited for protein identification using LC-MS/MS. In 16 spots selected for MS/MS analysis, TCE samples lead to the identification of 79 peptides; while CBB samples lead to the identification of 65 peptides. TCE samples also supported the identification of more proteins. The low stoichiometry of labeling of tryptophan residues does not require inclusion of this modification for database searches. In addition to being a rapid visualization technique compatible with MS, TCE visualization utilizes rapid washing conditions for sample preparation of proteins spots excised from polyacrylamide gels.

Visible fluorescent detection of proteins in polyacrylamide gels without staining.

2,2,2-Trichloroethanol (TCE) incorporated into polyacrylamide gels before polymerization provides fluorescent visible detection of proteins in less than 5min of total processing time. The tryptophans in proteins undergo an ultraviolet light-induced reaction with trihalocompounds to produce fluorescence in the visible range so that the protein bands can be visualized on a 300-nm transilluminator. In a previous study trichloroacetic acid or chloroform was used to stain polyacrylamide gel electrophoresis (PAGE) gels for protein visualization. This study shows that placing TCE in the gel before electrophoresis can eliminate the staining step. The gel is removed from the electrophoresis apparatus and placed on a transilluminator and then the protein bands develop their fluorescence in less than 5min. In addition to being rapid this visualization method provides detection of 0.2microg of typical globular proteins, which for some proteins is slightly more sensitive than the standard Coomassie brilliant blue (CBB) method. Integral membrane proteins, which do not stain well with CBB, are visualized well with the TCE in-gel method. After TCE in-gel visualization the same gel can then be CBB stained, allowing for complementary detection of proteins. In addition, visualization with TCE in the gel is compatible with two-dimensional PAGE, native PAGE, Western blotting, and autoradiography.

The twin-arginine leader-binding protein, DmsD, interacts with the TatB and TatC subunits of the Escherichia coli twin-arginine translocase.

The twin-arginine translocase (Tat) pathway is involved in the targeting and translocation of fully folded proteins to the inner membrane and periplasm of bacteria. Proteins that use this pathway contain a characteristic twin-arginine signal sequence, which interacts with the receptor complex formed by the TatBC subunits. Recently, the DmsD protein was discovered, which binds to the twin-arginine signal sequences of the anaerobic respiratory enzymes dimethylsulfoxide reductase (DmsABC) and trimethylamine N-oxide (TMAO) reductase. In this work, the targeting of DmsD within Escherichia coli was investigated. Using cell fractionation and Western blot analysis, DmsD is found to be associated with the inner membrane of wild-type E. coli and a dmsABC mutant E. coli under anaerobic conditions. In contrast, DmsD is predominantly found in the cytoplasmic fraction of a Delta tatABCDE strain, which suggests that DmsD interacts with the membrane-associated Tat complex. Under aerobic conditions DmsD was also found primarily in the cytoplasmic fraction of wild-type E. coli, suggesting that physiological conditions have a significant effect upon the targeting of DmsD to the inner membrane. Size exclusion chromatography data and membrane washing studies indicate that DmsD is interacting tightly with an integral membrane protein and not with the lipid component of the E. coli inner membrane. Additional investigation into the nature of this interaction revealed that the TatB and TatC subunits of the translocase are important for the interaction of DmsD with the E. coli inner membrane.