Visualization and Comprehension of Electronic and Topographic Contrasts on Cooperatively Switched Diarylethene-Bridged Ditopic Ligand.

Diarylethene is a prototypical molecular switch that can be reversibly photoisomerized between its open and closed forms. Ligands bpy-DAE-bpy, consisting of a phenyl-diarylethene-phenyl (DAE) central core and bipyridine (bpy) terminal substituents, are able to self-organize. They are investigated by scanning tunneling microscopy at the solid-liquid interface. Upon light irradiation, cooperative photochromic switching of the ligands is recognized down to the submolecular level. The closed isomers show different electron density of states (DOS) contrasts, attributed to the HOMO or LUMO molecular orbitals observed. More importantly, the LUMO images show remarkable differences between the open and closed isomers, attributed to combined topographic and electronic contrasts mainly on the DAE moieties. The electronic contrasts from multiple HOMO or LUMO distributions, combined with topographic distortion of the open or closed DAE, are interpreted by density functional theory (DFT) calculations.

New Insights into the Redox Properties of Pyridinium Appended 1,2-Dithienylcyclopentenes.

The optical and redox properties of a methyl pyridinium appended 1,2-dithienylethene photochromic derivative have been thoroughly investigated. A complex multi-step photo/redox mechanism is proposed for the closed isomer on the ground of spectro-electrochemical and theoretical data. The generated compounds are not stable over the time because of chemical reactions associated to the redox processes and a new dithienylethene derivative incorporating a seven-membered ring has been isolated and characterized.

Unprecedented ON/OFF Ratios in Photoactive Diarylethene-Bisthienylbenzene Molecular Junctions.

Photoactive molecular junctions, based on 4 nm thick diarylethene (DAE) and 5 nm thick bisthienylbenzene (BTB) layers, were fabricated by electrochemical deposition. Total thickness was around 9 nm, that is, above the direct tunneling limit and in the hopping regime. The DAE units were switched between their open and closed forms. The DAE/BTB bilayer structure exhibits new electronic functions combining photoswitching and photorectification. The open form of DAE/BTB shows low conductance and asymmetric I-V curves while the closed form shows symmetric I-V curves and high conductance. More importantly, unprecedented ON/OFF current ratios of over 10 000 at 1 V were reproducibly measured.

Long-Range Charge Transport in Diazonium-Based Single-Molecule Junctions.

Thin layers of cobalt and ruthenium polypyridyl-oligomers with thicknesses between 2 and 8 nm were deposited on gold by electrochemical reduction of diazonium salts. A scanning tunneling microscope was used to create single-molecule junctions (SMJs). The charge transport properties of the Au-[Co(tpy)2]n-Au (n = 1-4) SMJs do not depend markedly on the oligomer length, have an extremely low attenuation factor (ß âˆ¼ 0.19 nm-1), and do not show a thickness-dependent transition between two mechanisms. Resonant charge transport is proposed as the main transport mechanism. The SMJ conductance decreases by 1 order of magnitude upon changing the metal from Co to Ru. In Au-[Ru(tpy)2]n-Au and Au-[Ru(bpy)3]n-Au SMJs, a charge transport transition from direct tunneling to hopping is evidenced by a break in the length-dependent ß-plot. The three different mechanisms observed are a clear molecular signature on transport in SMJs. Most importantly, these results are in good agreement with those obtained on large-area molecular junctions.

Highly Efficient Photoswitch in Diarylethene-Based Molecular Junctions.

Thin layers of diarylethene oligomers (oligo(DAE)) were deposited by electrochemical reduction of a diazonium salt on glassy carbon and gold electrodes. The layers were fully characterized using electrochemistry, XPS, and AFM, and switching between open and closed forms using light was evidenced. Solid-state molecular junctions (MJs), in which a C-AFM tip is used as the top contact, were fabricated with total layer thicknesses fixed at 2-3 nm and 8-9 nm, i.e. below and above the direct tunneling limit. DAE was then photoswitched between its open and closed forms. Oligo(DAE) MJs using the open form of DAE are highly resistive while those with DAE in the closed form are more conductive. ON/OFF ratios of 2-3 and 200-400 were obtained for 3-nm- and 9-nm-thick DAE MJs, respectively.

All Visible Light Switch Based on the Dimethyldihydropyrene Photochromic Core.

Two photoswitchable compounds that can operate under visible light irradiation are prepared and investigated using spectroscopic and computational studies. These all-visible systems are based on the dimethyldihydropyrene (DHP)/cyclophanediene (CPD) photochromic couple connected either to a bipyridine (bpy) unit or to a (tris(bpy)ruthenium(II)) complex through a pyridinium bridge. In these compounds, the DHP to CPD isomerization and the reverse CPD to DHP conversion can be triggered by illumination with red (>630 nm) and blue (460 nm) lights, respectively. The unambiguous and reversible response of these systems triggered by visible light make them potential candidates for biological purposes and electronic devices.

Catalytic Light-Triggered Reduction Promoted by a Dithienylethene Derivative.

A pyridinium substituted dithienylethene derivative was used for the first time as an efficient photoreducing agent of two different substrates. This reaction exhibits high catalytic yields due to the continuous regeneration of the initial state of the photochromic molecule.

Correction: Multi-functional switches of ditopic ligands with azobenzene central bridges at a molecular scale.

Correction for 'Multi-functional switches of ditopic ligands with azobenzene central bridges at a molecular scale' by Imen Hnid et al., Nanoscale, 2019, 11, 23042-23048.

One-Dimensional Double Wires and Two-Dimensional Mobile Grids: Cobalt/Bipyridine Coordination Networks at the Solid/Liquid Interface.

Various architectures have been generated and observed by STM at a solid/liquid interface resulting from an in situ chemical reaction between the bipyridine terminal groups of a ditopic ligand and Co(II) ions. Large monodomains of one-dimensional (1D) double wires are formed by Co(II)/ligand coordination, with polymer lengths as long as 150 nm. The polymers are organized as parallel wires 8 nm apart, and the voids between wires are occupied by solvent molecules. Two-dimensional (2D) grids, showing high surface mobility, coexist with the wires. The wires are formed from linear chain motifs where each cobalt center is bonded to two bipyridines. 2D grids are generated from a bifurcation node where one cobalt bonds to three bipyridines. Surface reconstruction of the grids and of the 1D wires was observed under the STM tip. As an exciting result, analysis of these movements strongly indicates surface reactions at the solid/liquid interface.

Highly Efficient Long-Range Electron Transport in a Viologen-Based Molecular Junction.

Thin layers of viologen-based oligomers with thicknesses between 3 and 14 nm were deposited on gold electrodes by electrochemical reduction of a diazonium salt, and then a Ti/Au top contact was applied to complete a solid-state molecular junction (MJ). MJs show symmetric J- V curves and highly efficient long-range transport, with an attenuation factor as small as 0.25 nm-1. This is attributed both to the fact that the viologen LUMO energy lies between the energies of the Fermi levels of the two contacts and to strong electronic coupling between molecules and contacts. As a consequence, resonant tunneling is likely to be the dominant transport mechanism within these MJs, but the temperature dependence of the transport properties suggests that activated redox hopping plays a role at high temperature.

Electrografted monolayer based on a naphthalene diimide-ruthenium terpyridine complex dyad: efficient creation of large-area molecular junctions with high current densities.

An electron donor-acceptor dyad has been designed for the creation of large-area molecular junctions (MJ). Diazonium cation electrografting was used to form well controlled monolayers. The robustness of the monolayer enabled the creation of MJs using direct top-coat evaporation with a high yield of operating devices.

Control of Rectification in Molecular Junctions: Contact Effects and Molecular Signature.

Thin layers of oligomers with thickness between 7 and 9 nm were deposited on flat gold electrode surfaces by electrochemical reduction of diazonium reagents, then a Ti(2 nm)/Au top contact was applied to complete a solid-state molecular junction. The molecular layers investigated included donor molecules with relatively high energy HOMO, molecules with high HOMO-LUMO gaps and acceptor molecules with low energy LUMO and terminal alkyl chain. Using an oligo(bisthienylbenzene) based layer, a molecule whose HOMO energy level in a vacuum is close to the Fermi level of the gold bottom electrode, the devices exhibit robust and highly reproducible rectification ratios above 1000 at low voltage (2.7 V). Higher current is observed when the bottom gold electrode is biased positively. When the molecular layer is based on a molecule with a high HOMO-LUMO gap, i.e., tetrafluorobenzene, no rectification is observed, while the direction of rectification is reversed if the molecular layer consists of naphtalene diimides having low LUMO energy level. Rectification persisted at low temperature (7 K), and was activationless between 7 and 100 K. The results show that rectification is induced by the asymmetric contact but is also directly affected by orbital energies of the molecular layer. A "molecular signature" on transport through layers with thicknesses above those used when direct tunneling dominates is thus clearly observed, and the rectification mechanism is discussed in terms of Fermi level pinning and electronic coupling between molecules and contacts.

Robust Bipolar Light Emission and Charge Transport in Symmetric Molecular Junctions.

Molecular junctions consisting of a Ru(bpy)3 oligomer between conducting carbon contacts exhibit an exponential dependence of junction current on molecular layer thickness (d) similar to that observed for other aromatic devices when d < 4 nm. However, when d > 4 nm, a change in transport mechanism occurs which coincides with light emission in the range of 600-900 nm. Unlike light emission from electrochemical cells or solid-state films containing Ru(bpy)3, emission is bipolar, occurs in vacuum, has rapid rise time (<5 ms), and persists for >10 h. Light emission directly indicates simultaneous hole and electron injection and transport, possibly resonant due to the high electric field present (>3 MV/cm). Transport differs fundamentally from previous tunneling and hopping mechanisms and is a clear "molecular signature" relating molecular structure to electronic behavior.

Conductance in a bis-terpyridine based single molecular breadboard circuit.

Controlling charge flow in single molecule circuits with multiple electrical contacts and conductance pathways is a much sought after goal in molecular electronics. In this joint experimental and theoretical study, we advance the possibility of creating single molecule breadboard circuits through an analysis of the conductance of a bis-terpyridine based molecule (TP1). The TP1 molecule can adopt multiple conformations through relative rotations of 7 aromatic rings and can attach to electrodes in 61 possible single and multi-terminal configurations through 6 pyridyl groups. Despite this complexity, we show that it is possible to extract well defined conductance features for the TP1 breadboard and assign them rigorously to the underlying constituent circuits. Mechanically controllable break-junction (MCBJ) experiments on the TP1 molecular breadboard show an unprecedented 4 conductance states spanning a range 10 -2G0 to 10 -7G0. Quantitative theoretical examination of the conductance of TP1 reveals that combinations of 5 types of single terminal 2-5 ring subcircuits are accessed as a function of electrode separation to produce the distinct conductance steps observed in the MCBJ experiments. We estimate the absolute conductance for each single terminal subcircuit and its percentage contribution to the 4 experimentally observed conductance states. We also provide a detailed analysis of the role of quantum interference and thermal fluctuations in modulating conductance within the subcircuits of the TP1 molecular breadboard. Finally, we discuss the possible development of molecular circuit theory and experimental advances necessary for mapping conductance through complex single molecular breadboard circuits in terms of their constituent subcircuits.

Efficient Photoswitch System Combining a Dimethyldihydropyrene Pyridinium Core and Ruthenium(II) Bis-Terpyridine Entities.

Terpyridine ruthenium complexes linked to the dimethyldihydropyrene (DHP) photochromic unit have been synthesized and fully characterized by cyclic voltammetry and absorption and emission spectroscopy. The study of the photoisomerization reaction undergone by the DHP motif under visible light irradiation is reported. In comparison to previous work, the introduction of an electron-withdrawing pyridinium spacer between the chelating terpyridine unit and the DHP skeleton has considerably tuned the photochromic properties of the free ligands and their corresponding complexes in term of time response and photoreversibility. A rapid, reversible, and complete conversion between the closed and the open forms has been clearly evidenced under visible light irradiation. Only slight perturbations have been induced by the presence of ruthenium centers. Experimental findings and their interpretation have been supported by theoretical calculations.

Unprecedented Self-Organized Monolayer of a Ru(II) Complex by Diazonium Electroreduction.

A new heteroleptic polypyridyle Ru(II) complex was synthesized and deposited on surface by the diazonium electroreduction process. It yields to the covalent grafting of a monolayer. The functionalized surface was characterized by XPS, electrochemistry, AFM, and STM. A precise organization of the molecules within the monolayer is observed with parallel linear stripes separated by a distance of 3.8 nm corresponding to the lateral size of the molecule. Such organization suggests a strong cooperative process in the deposition process. This strategy is an original way to obtain well-controlled and stable functionalized surfaces for potential applications related to the photophysical properties of the grafted chromophore. As an exciting result, it is the first example of a self-organized monolayer (SOM) obtained using diazonium electroreduction.

Dimethyldihydropyrene-cyclophanediene photochromic couple functionalized with terpyridyl metal complexes as multi-addressable redox- and photo-switches.

A series of dimethyldihydropyrene-appended metal complexes has been synthesized and thoroughly characterized using electrochemical and spectroscopic methods. The ring-opening reaction undergone by the dimethyldihydropyrene core under visible light irradiation proceeds much more efficiently when the metal complexes and the photochromic moiety are connected through a pyridinium-bridge vs a phenyl bridge. The clean electrochemical and photochemical responses of these hybrid systems make them good candidates for the conception of new multi-addressable photo- and redox-switches.

Correction: Reactivity of a pyridinium-substituted dimethyldihydropyrene switch under aerobic conditions: self-sensitized photo-oxygenation and thermal release of singlet oxygen.

Correction for 'Reactivity of a pyridinium-substituted dimethyldihydropyrene switch under aerobic conditions: self-sensitized photo-oxygenation and thermal release of singlet oxygen' by Saioa Cobo et al., Chem. Commun., 2015, 51, 13886-13889.

Reactivity of a pyridinium-substituted dimethyldihydropyrene switch under aerobic conditions: self-sensitized photo-oxygenation and thermal release of singlet oxygen.

The behavior of a pyridinium-substituted dimethyldihydropyrene photo-switch under aerobic conditions was investigated. During irradiation with red light (λ ≥ 630 nm), this compound plays the role of oxygen sensitizer and is quantitatively converted into an endoperoxide derivative. The photo-produced endoperoxide then thermally releases singlet oxygen to regenerate the starting compound.

A multi-addressable switch based on the dimethyldihydropyrene photochrome with remarkable proton-triggered photo-opening efficiency.

A series of photochromic derivatives based on the trans-10b,10c-dimethyl-10b,10c-dihydropyrene (DHP, "closed form") skeleton has been synthesized and their photoisomerization leading to the corresponding cyclophanediene (CPD, "open form") isomers has been investigated by UV/Vis and (1) H NMR spectroscopies. Substitution of the DHP core with electron-withdrawing pyridinium groups was found to have major effects on the photoisomerization efficiency, the most remarkable examples being to enhance the quantum yield of the opening reaction and to allow fast and quantitative conversions at much lower radiant energies. This effect was rationalized by theoretical calculations. We also show that the reverse reaction, that is, going from the open form to the closed form, can be electrochemically triggered by oxidation of the CPD unit and that the photo-opening properties of pyridine-substituted DHPs can be efficiently tuned by protonation, the system behaving as a multi-addressable molecular switch. These multi-addressable photochromes show promise for the development of responsive materials.