The effect of capsaicin on expression patterns of CGRP in trigeminal ganglion and trigeminal nucleus caudalis following experimental tooth movement in rats

ABSTRACT Objectives The aim of this study was to explore the effect of capsaicin on expression patterns of calcitonin gene-related peptide (CGRP) in the trigeminal ganglion (TG) and trigeminal subnucleus caudalis (Vc) following experimental tooth movement. Material and Methods Male Sprague-Dawley rats were used in this study and divided into small-dose capsaicin+force group, large-dose capsaicin+force group, saline+force group, and no force group. Closed coil springs were used to mimic orthodontic forces in all groups except for the no force group, in which springs were inactivated. Capsaicin and saline were injected into periodontal tissues. Rats were euthanized at 0 h, 12 h, 1 d, 3 d, 5 d, and 7 d following experimental tooth movement. Then, TG and Vc were obtained for immunohistochemical staining and western blotting against CGRP. Results Immunohistochemical results indicated that CGRP positive neurons were located in the TG, and CGRP immunoreactive fibers were distributed in the Vc. Immunohistochemical semiquantitative analysis and western blotting analysis demonstrated that CGRP expression levels both in TG and Vc were elevated at 12 h, 1 d, 3 d, 5 d, and 7 d in the saline + force group. However, both small-dose and large-dose capsaicin could decrease CGRP expression in TG and Vc at 1 d and 3 d following experimental tooth movement, as compared with the saline + force group. Conclusions These results suggest that capsaicin could regulate CGRP expression in TG and Vc following experimental tooth movement in rats.

The effect of capsaicin on expression patterns of CGRP in trigeminal ganglion and trigeminal nucleus caudalis following experimental tooth movement in rats.

Objectives: The aim of this study was to explore the effect of capsaicin on expression patterns of calcitonin gene-related peptide (CGRP) in the trigeminal ganglion (TG) and trigeminal subnucleus caudalis (Vc) following experimental tooth movement. Material and Methods: Male Sprague-Dawley rats were used in this study and divided into small-dose capsaicin+force group, large-dose capsaicin+force group, saline+force group, and no force group. Closed coil springs were used to mimic orthodontic forces in all groups except for the no force group, in which springs were inactivated. Capsaicin and saline were injected into periodontal tissues. Rats were euthanized at 0 h, 12 h, 1 d, 3 d, 5 d, and 7 d following experimental tooth movement. Then, TG and Vc were obtained for immunohistochemical staining and western blotting against CGRP. Results: Immunohistochemical results indicated that CGRP positive neurons were located in the TG, and CGRP immunoreactive fibers were distributed in the Vc. Immunohistochemical semiquantitative analysis and western blotting analysis demonstrated that CGRP expression levels both in TG and Vc were elevated at 12 h, 1 d, 3 d, 5 d, and 7 d in the saline + force group. However, both small-dose and large-dose capsaicin could decrease CGRP expression in TG and Vc at 1 d and 3 d following experimental tooth movement, as compared with the saline + force group. Conclusions: These results suggest that capsaicin could regulate CGRP expression in TG and Vc following experimental tooth movement in rats.

Finite element analysis of rapid canine retraction through reducing resistance and distraction.

OBJECTIVE: The aims of this study were to compare different surgical approaches to rapid canine retraction by designing and selecting the most effective method of reducing resistance by a three-dimensional finite element analysis. MATERIAL AND METHODS: Three-dimensional finite element models of different approaches to rapid canine retraction by reducing resistance and distraction were established, including maxillary teeth, periodontal ligament, and alveolar. The models were designed to dissect the periodontal ligament, root, and alveolar separately. A 1.5 N force vector was loaded bilaterally to the center of the crown between first molar and canine, to retract the canine distally. The value of total deformation was used to assess the initial displacement of the canine and molar at the beginning of force loading. Stress intensity and force distribution were analyzed and evaluated by Ansys 13.0 through comparison of equivalent (von Mises) stress and maximum shear stress. RESULTS: The maximum value of total deformation with the three kinds of models occurred in the distal part of the canine crown and gradually reduced from the crown to the apex of the canine; compared with the canines in model 3 and model 1, the canine in model 2 had the maximum value of displacement, up to 1.9812 mm. The lowest equivalent (von Mises) stress and the lowest maximum shear stress were concentrated mainly on the distal side of the canine root in model 2. The distribution of equivalent (von Mises) stress and maximum shear stress on the PDL of the canine in the three models was highly concentrated on the distal edge of the canine cervix. . CONCLUSIONS: Removal of the bone in the pathway of canine retraction results in low stress intensity for canine movement. Periodontal distraction aided by surgical undermining of the interseptal bone would reduce resistance and effectively accelerate the speed of canine retraction.

Finite element analysis of rapid canine retraction through reducing resistance and distraction

Objective: The aims of this study were to compare different surgical approaches to rapid canine retraction by designing and selecting the most effective method of reducing resistance by a three-dimensional finite element analysis. Material and Methods: Three-dimensional finite element models of different approaches to rapid canine retraction by reducing resistance and distraction were established, including maxillary teeth, periodontal ligament, and alveolar. The models were designed to dissect the periodontal ligament, root, and alveolar separately. A 1.5 N force vector was loaded bilaterally to the center of the crown between first molar and canine, to retract the canine distally. The value of total deformation was used to assess the initial displacement of the canine and molar at the beginning of force loading. Stress intensity and force distribution were analyzed and evaluated by Ansys 13.0 through comparison of equivalent (von Mises) stress and maximum shear stress. Results: The maximum value of total deformation with the three kinds of models occurred in the distal part of the canine crown and gradually reduced from the crown to the apex of the canine; compared with the canines in model 3 and model 1, the canine in model 2 had the maximum value of displacement, up to 1.9812 mm. The lowest equivalent (von Mises) stress and the lowest maximum shear stress were concentrated mainly on the distal side of the canine root in model 2. The distribution of equivalent (von Mises) stress and maximum shear stress on the PDL of the canine in the three models was highly concentrated on the distal edge of the canine cervix. . Conclusions: Removal of the bone in the pathway of canine retraction results in low stress intensity for canine movement. Periodontal distraction aided by surgical undermining of the interseptal bone would reduce resistance and effectively accelerate the speed of canine retraction. .

PAX9 polymorphism and susceptibility to sporadic non-syndromic severe anodontia: a case-control study in southwest China.

UNLABELLED: Our research aimed to look into the clinical traits and genetic mutations in sporadic non-syndromic anodontia and to gain insight into the role of mutations of PAX9, MSX1, AXIN2 and EDA in anodontia phenotypes, especially for the PAX9. MATERIAL AND METHODS: The female proband and her family members from the ethnic Han families underwent complete oral examinations and received a retrospective review. Venous blood samples were obtained to screen variants in the PAX9, MSX1, AXIN2, and EDA genes. A case-control study was performed on 50 subjects with sporadic tooth agenesis (cases) and 100 healthy controls, which genotyped a PAX9 gene polymorphism (rs4904210). RESULTS: Intra-oral and panoramic radiographs revealed that the female proband had anodontia denoted by the complete absence of teeth in both the primary and secondary dentitions, while all her family members maintained normal dentitions. Detected in the female proband were variants of the PAX9 and AXIN2 including A240P (rs4904210) of the PAX9, c.148C>T (rs2240308), c.1365A>G (rs9915936) and c.1386C>T (rs1133683) of the AXIN2. The same variants were present in her unaffected younger brother. The PAX9 variations were in a different state in her parents. Mutations in the MSX1 and EDA genes were not identified. No significant differences were found in the allele and genotype frequencies of the PAX9 polymorphism between the controls and the subjects with sporadic tooth agenesis. CONCLUSIONS: These results suggest that the association of A240P with sporadic tooth agenesis still remains obscure, especially for different populations. The genotype/phenotype correlation in congenital anodontia should be verified.

PAX9 polymorphism and susceptibility to sporadic non-syndromic severe anodontia: a case-control study in southwest China

Our research aimed to look into the clinical traits and genetic mutations in sporadic non-syndromic anodontia and to gain insight into the role of mutations of PAX9, MSX1, AXIN2 and EDA in anodontia phenotypes, especially for the PAX9. Material and Methods The female proband and her family members from the ethnic Han families underwent complete oral examinations and received a retrospective review. Venous blood samples were obtained to screen variants in the PAX9, MSX1, AXIN2, and EDA genes. A case-control study was performed on 50 subjects with sporadic tooth agenesis (cases) and 100 healthy controls, which genotyped a PAX9 gene polymorphism (rs4904210). Results Intra-oral and panoramic radiographs revealed that the female proband had anodontia denoted by the complete absence of teeth in both the primary and secondary dentitions, while all her family members maintained normal dentitions. Detected in the female proband were variants of the PAX9 and AXIN2 including A240P (rs4904210) of the PAX9, c.148C>T (rs2240308), c.1365A>G (rs9915936) and c.1386C>T (rs1133683) of the AXIN2. The same variants were present in her unaffected younger brother. The PAX9 variations were in a different state in her parents. Mutations in the MSX1 and EDA genes were not identified. No significant diferences were found in the allele and genotype frequencies of the PAX9 polymorphism between the controls and the subjects with sporadic tooth agenesis. Conclusions These results suggest that the association of A240P with sporadic tooth agenesis still remains obscure, especially for different populations. The genotype/phenotype correlation in congenital anodontia should be verified. .