Activated Carbon-Enriched Electrospun-Produced Scaffolds for Drug Delivery/Release in Biological Systems.

To vectorize drug delivery from electrospun-produced scaffolds, we introduce a thin outer drug retention layer produced by electrospinning from activated carbon nanoparticles (ACNs)-enriched polycaprolacton (PCL) suspension. Homogeneous or coaxial fibers filled with ACNs were produced by electrospinning from different PCL-based suspensions. Stable ACN suspensions were selected by sorting through solvents, stabilizers and auxiliary components. The ACN-enriched scaffolds produced were characterized for fiber diameter, porosity, pore size and mechanical properties. The scaffold structure was analyzed by scanning electron microscopy and X-ray photoelectron spectroscopy. It was found that ACNs were mainly coated with a polymer layer for both homogeneous and coaxial fibers. Drug binding and release from the scaffolds were tested using tritium-labeled sirolimus. We showed that the kinetics of sirolimus binding/release by ACN-enriched scaffolds was determined by the fiber composition and differed from that obtained with a free ACN. ACN-enriched scaffolds with coaxial and homogeneous fibers had a biocompatibility close to scaffold-free AC, as was shown by the cultivation of human gingival fibroblasts and umbilical vein cells on scaffolds. The data obtained demonstrated that ACN-enriched scaffolds had good physico-chemical properties and biocompatibility and, thus, could be used as a retaining layer for vectored drug delivery.

Effect of Sterilization Methods on Electrospun Scaffolds Produced from Blend of Polyurethane with Gelatin.

Fibrous polyurethane-based scaffolds have proven to be promising materials for the tissue engineering of implanted medical devices. Sterilization of such materials and medical devices is an absolutely essential step toward their medical application. In the presented work, we studied the effects of two sterilization methods (ethylene oxide treatment and electron beam irradiation) on the fibrous scaffolds produced from a polyurethane-gelatin blend. Scaffold structure and properties were studied by scanning electron microscopy (SEM), atomic force microscopy (AFM), infrared spectroscopy (FTIR), a stress-loading test, and a cell viability test with human fibroblasts. Treatment of fibrous polyurethane-based materials with ethylene oxide caused significant changes in their structure (formation of glued-like structures, increase in fiber diameter, and decrease in pore size) and mechanical properties (20% growth of the tensile strength, 30% decline of the maximal elongation). All sterilization procedures did not induce any cytotoxic effects or impede the biocompatibility of scaffolds. The obtained data determined electron beam irradiation to be a recommended sterilization method for electrospun medical devices made from polyurethane-gelatin blends.

Activated Carbon for Drug Delivery from Composite Biomaterials: The Effect of Grinding on Sirolimus Binding and Release.

Activated carbon (AC) could be potentially useful as a drug carrier in fiber polymer scaffolds destined for prolonged drug delivery. To be introduced, AC must be ground into smaller-sized particles to be introduced in scaffolds, as most biocompatible scaffolds consist of fibers with a diameter of less than 1 µm. In this study, the adsorption of sirolimus (SRL) from phosphate-buffered saline (PBS) solution and blood plasma (BP) onto AC of AX-21 type, as well as the release of SRL from AC depending on its fragmentation, were studied. Two-stage grinding of the AC, first with a ball mill, and then with a bead mill, was performed. Grinding with a bead mill was performed either in water or in polyvinylpyrrolidone to prevent aggregation of AC particles. Dynamic light scattering and scanning electron microscopy (SEM) demonstrated that the size of the particles obtained after grinding with a ball mill was 100-10,000 nm, and after grinding with a bead mill, 100-300 nm. Adsorption in PBS was significantly higher than in BP for all fractions, and depended on SRL concentration. The fraction obtained after grinding with a ball mill showed maximal SRL adsorption, both in PBS and BP, and slow SRL release, in comparison with other fractions. The 100-300 nm AC fractions were able to adsorb and completely release SRL into BP, in contrast to other fractions, which strongly bound a significant amount of SRL. The data obtained are to be used for controlled SRL delivery, and thus in the modification of drug delivery in biological media.

Correction: Gostev et al. In Vivo Stability of Polyurethane-Based Electrospun Vascular Grafts in Terms of Chemistry and Mechanics. Polymers 2020, 12, 845.

The authors wish to make a change to the published paper [...].

Structural Aspects of Electrospun Scaffolds Intended for Prosthetics of Blood Vessels.

Electrospinning is a popular method used to fabricate small-diameter vascular grafts. However, the importance of structural characteristics of the scaffold determining interaction with endothelial cells and their precursors and blood cells is still not exhaustively clear. This review discusses current research on the significance and impact of scaffold architecture (fiber characteristics, porosity, and surface roughness of material) on interactions between cells and blood with the material. In addition, data about the effects of scaffold topography on cellular behaviour (adhesion, proliferation, and migration) are necessary to improve the rational design of electrospun vascular grafts with a long-term perspective.

Core-Shell Magnetoactive PHB/Gelatin/Magnetite Composite Electrospun Scaffolds for Biomedical Applications.

Novel hybrid magnetoactive composite scaffolds based on poly(3-hydroxybutyrate) (PHB), gelatin, and magnetite (Fe3O4) were fabricated by electrospinning. The morphology, structure, phase composition, and magnetic properties of composite scaffolds were studied. Fabrication procedures of PHB/gelatin and PHB/gelatin/Fe3O4 scaffolds resulted in the formation of both core-shell and ribbon-shaped structure of the fibers. In case of hybrid PHB/gelatin/Fe3O4 scaffolds submicron-sized Fe3O4 particles were observed in the surface layers of the fibers. The X-ray photoelectron spectroscopy results allowed the presence of gelatin on the fiber surface (N/C ratio-0.11) to be revealed. Incubation of the composite scaffolds in saline for 3 h decreased the amount of gelatin on the surface by more than ~75%. The differential scanning calorimetry results obtained for pure PHB scaffolds revealed a characteristic melting peak at 177.5 °C. The presence of gelatin in PHB/gelatin and PHB/gelatin/Fe3O4 scaffolds resulted in the decrease in melting temperature to 168-169 °C in comparison with pure PHB scaffolds due to the core-shell structure of the fibers. Hybrid scaffolds also demonstrated a decrease in crystallinity from 52.3% (PHB) to 16.9% (PHB/gelatin) and 9.2% (PHB/gelatin/Fe3O4). All the prepared scaffolds were non-toxic and saturation magnetization of the composite scaffolds with magnetite was 3.27 ± 0.22 emu/g, which makes them prospective candidates for usage in biomedical applications.

miRNAs and androgen deprivation therapy for prostate cancer.

Androgen deprivation therapy (ADT) is mainly used for the treatment of advanced, metastatic or recurrent prostate cancer (PCa). However, patients progress to ADT resistance and castration-resistant prostate cancer (CRPC) with a poor prognosis. Reliable validated markers of ADT resistance with proven clinical utility are necessary for timely correction of the therapy as well as for improvement of patient quality of life. MiRNAs involved in the ADT response and CRPC development via multiple mechanisms may act as biomarkers for patient outcomes. Available data on miRNAs associated with the ADT response (resistance and sensitivity) are summarized and analyzed in the manuscript, including analyses using bioinformatics resources. Molecular targets of miRNAs, as well as reciprocal relations between miRNAs and their targets, were studied using different databases. Special attention was dedicated to the mechanisms of ADT resistance and CRPC development, including testosterone, PI3K-AKT, VEGF pathways and associated genes. Several different approaches can be used to search for miRNAs associated with the ADT response, each of which focuses on the associated set of miRNAs - potential markers of ADT. The intersection of these approaches and combined analysis allowed us to select the most promising miRNA markers of the ADT response. Meta-analysis of the current data indicated that the selected 5 miRNAs (miRNAs - 125b, miR-21, miR-23b, miR-27b and miR-221) and 14 genes are involved in the regulation of key processes of CRPC development and represent the most promising predictors of the ADT response, further demonstrating their potential in combination therapy for advanced PCa.

Influence of Elongation of Paclitaxel-Eluting Electrospun-Produced Stent Coating on Paclitaxel Release and Transport through the Arterial Wall after Stenting.

It was previously shown that polycaprolactone (PCL)-based electrospun-produced paclitaxel (PTX)-enriched matrices exhibit long-term drug release kinetics and can be used as coatings for drug-eluting stents (DES). The installation of vascular stents involves a twofold increase in stent diameter and, therefore, an elongation of the matrices covering the stents, as well as the arterial wall in a stented area. We studied the influence of matrix elongation on its structure and PTX release using three different electrospun-produced matrices. The data obtained demonstrate that matrix elongation during stent installation does not lead to fiber breaks and does not interfere with the kinetics of PTX release. To study PTX diffusion through the expanded artery wall, stents coated with 5%PCL/10%HSA/3%DMSO/PTX and containing tritium-labeled PTX were installed into the freshly obtained iliac artery of a rabbit. The PTX passing through the artery wall was quantified using a scintillator ß-counter. The artery retained the PTX and decreased its release from the coating. The retention of PTX by the arterial wall was more efficient when incubated in blood plasma in comparison with PBS. The retention/accumulation of PTX by the arterial wall provides a prolonged drug release and allows for the reduction in the dose of the drugs in electrospun-produced stent coatings.

Isolation of Extracellular Vesicles from Biological Fluids via the Aggregation-Precipitation Approach for Downstream miRNAs Detection.

Extracellular vesicles (EVs) have high potential as sources of biomarkers for non-invasive diagnostics. Thus, a simple and productive method of EV isolation is demanded for certain scientific and medical applications of EVs. Here we aim to develop a simple and effective method of EV isolation from different biofluids, suitable for both scientific, and clinical analyses of miRNAs transported by EVs. The proposed aggregation-precipitation method is based on the aggregation of EVs using dextran blue and the subsequent precipitation of EVs using 1.5% polyethylene glycol solutions. The developed method allows the effective isolation of EVs from plasma and urine. As shown using TEM, dynamic light scattering, and miRNA analyses, this method is not inferior to ultracentrifugation-based EV isolation in terms of its efficacy, lack of inhibitors for polymerase reactions and applicable for both healthy donors and cancer patients. This method is fast, simple, does not need complicated equipment, can be adapted for different biofluids, and has a low cost. The aggregation-precipitation method of EV isolation accessible and suitable for both research and clinical laboratories. This method has the potential to increase the diagnostic and prognostic utilization of EVs and miRNA-based diagnostics of urogenital pathologies.

MiRNAs and radical prostatectomy: Current data, bioinformatic analysis and utility as predictors of tumour relapse.

BACKGROUND: Studies of microRNAs (miRNAs) and genes have particular interest for cancer biology and medicine due to the discovery of new therapeutic targets and markers. These studies are extensively influenced by anticancer therapy, as miRNAs interfere with the therapy's efficacy in prostate cancer (PCa). OBJECTIVES: In this article, we summarise the available data on the influence of radical prostatectomy (RP) and biochemical recurrence on miRNA expression. MATERIALS AND METHODS: Molecular targets of these miRNAs, as well as the reciprocal relations between different miRNAs and their targets, were studied using the DIANA, STRING and TransmiR databases. Special attention was dedicated to the mechanisms of PCa development, miRNA, and associated genes as tumour development mediators. RESULTS AND DISCUSSION: Combined analysis of the databases and available literature indicates that expression of four miRNAs that are associated with prostate cancer relapse and alter their expression after RP, combined with genes that closely interact with selected miRNAs, has high potential for the prediction of PCa relapse after RP. PCa tissues and biofluids, both immediately after RP for diagnostics/prognostics and in long-term (relapse) monitoring, may be used as sources of these miRNAs. CONCLUSION: An overview of the usefulness of published data and bioinformatics resources looking for diagnostic markers and molecular targets is presented in this article. The selected miRNA and gene panels have good potential as prognostic and PCa relapse markers after RP and likely could also serve as markers for therapeutic efficiency on a broader scale.

Long interspersed nuclear element-1 methylation status in the circulating DNA from blood of patients with malignant and chronic inflammatory lung diseases.

Along with other malignant diseases, lung cancer arises from the precancerous lung tissue state. Aberrant DNA methylation (hypermethylation of certain genes and hypomethylation of retrotransposons) is known as one of the driving forces of malignant cell transformation. Epigenetic changes were shown to be detectable in DNA, circulating in the blood (cirDNA) of cancer patients, indicating the possibility to use them as cancer markers. The current study is the first to compare the Long interspersed nuclear element-1 (LINE-1) methylation level in the blood from lung cancer patients before treatment versus different control groups as healthy subjects, patients with bronchitis and patients with chronic obstructive pulmonary disease (COPD). The concentration of LINE-1 methylated fragments, region 1 (LINE-1 methylated, LINE-1-met) was estimated by quantitative methyl-specific PCR. The total concentration of the circulating LINE-1 copies was measured by qPCR specific for LINE-1 region 2, which was selected due to its CpG methylation-independent sequence (LINE-1-Ind). Both LINE-1 methylation level and LINE-1 methylation index (LINE-1-met/LINE-1-Ind ratio) was decreased in lung cancer patients compared with the joint control group (healthy subjects + patients with bronchitis + COPD patients) (Mann-Whitney U-test, P = 0.016). We also found that the tendency of LINE-1 methylation index decreases in the cirDNA from lung cancer patients versus COPD patients (Mann-Whitney U-test, P = 0.07). Our data indicate that the quantitative analysis of the LINE-1 methylation level in the cirDNA is valuable for discrimination of lung cancer patients from patients with chronic inflammatory lung diseases.

miRNAs and radiotherapy response in prostate cancer.

BACKGROUND: Gaining insight into microRNAs (miRNAs) and genes that regulate the therapeutic response of cancer diseases in general and prostate cancer (PCa) in particular is an important issue in current molecular biomedicine and allows the discovery of predictive miRNA targets. OBJECTIVES: The aim of this study was to analyze the available data on the influence of radiotherapy (RT) on miRNA expression and on miRNA involved in radiotherapy response in PCa. MATERIALS AND METHODS: The data used in this review were extracted from research papers and the DIANA, STRING, and other databases with a special focus on the mechanisms of radiotherapy PCa response and the miRNA involved and associated genes. RESULTS AND DISCUSSION: A search for miRNA prognostic and therapeutic effectiveness markers should rely on both the data of recent experimental studies on the influence of RT on miRNA expression and miRNAs involved in regulation of radiosensitivity in PCa and on bioinformatics resources. miRNA panels and genes targeted by them and involved in radioresponse regulation highlighted by meta-analysis and cross-analysis of the data in the present review have. CONCLUSION: Selected miRNA and gene panel has good potential as prognostic and radiotherapy effectiveness markers for PCa and, moreover, as radiotherapy effectiveness markers in other types of cancer, as the proposed model is not specific to PCa, which opens up opportunities for the development of a universal diagnostic system (or several intersecting systems) for oncology radiotherapy in general.

The Influence of Radical Prostatectomy on the Expression of Cell-Free MiRNA.

MiRNAs of blood and urine have been shown to represent a convenient source of biomarkers for prostate cancer (PCa) diagnosis and assessment of the therapy effectiveness due to their high stability and representation and the low invasiveness of sample collection. Here, we studied the influence of radical prostatectomy (RP) on the expression of 12 cell-free miRNAs previously shown as potential markers of PCa (i.e., miR-19b, miR-22, miR-92a, miR-378, miR-425, miR-30e, miR-31, miR-125b, miR-200b, miR-205, miR-375 and miR-660). The relative expression of the miRNAs combined into 31 paired ratios was evaluated in the urine extracellular vesicles (EVs), clarified urine (CU) and blood plasma of healthy donors, pre- and post-RP samples of PCa patients. Nineteen miRNA ratios based on combinations of ten of the miRNAs (miR-19b, miR-30e, miR-31, miR-125b, miR-200b, miR-205, miR-375, miR-378, miR-425, and miR-660) were altered by RP. The comparative expression analysis of the cell-free miRNA ratios between healthy donors and PCa patients revealed miR-125b/miR-30e and miR-375/miR-30e as potential markers for evaluating therapeutic efficacy. MiR-378/miR-19b, miR-425/miR-19b, miR-200/miR-30e, miR-660/miR-30e, and miR-205/miR-30e had minor prognostic value but could be used to increase the steadiness of the diagnostic system. The urine EVs had the highest potential as a source of markers.

Vascular Stents Coated with Electrospun Drug-Eluting Material: Functioning in Rabbit Iliac Artery.

A stenting procedure aimed at blood flow restoration in stenosed arteries significantly improves the efficiency of vascular surgery. However, the current challenge is to prevent neointimal growth, which reduces the vessel lumen, in the stented segments in the long run. We tested in vivo drug-eluting coating applied by electrospinning to metal vascular stents to inhibit the overgrowth of neointimal cells via both the drug release and mechanical support of the vascular wall. The blend of polycaprolactone with human serum albumin and paclitaxel was used for stent coating by electrospinning. The drug-eluting stents (DESs) were placed using a balloon catheter to the rabbit common iliac artery for 1, 3, and 6 months. The blood flow rate was ultrasonically determined in vivo. After explantation, the stented arterial segment was visually and histologically examined. Any undesirable biological responses (rejection or hemodynamically significant stenosis) were unobservable in the experimental groups. DESs were less traumatic and induced weaker neointimal growth; over six months, the blood flow increased by 37% versus bare-metal stents, where it increased by at least double the rate. Thus, electrospun-coated DESs demonstrate considerable advantages over the bare-metal variants.

Sirolimus-Eluting Electrospun-Produced Matrices as Coatings for Vascular Stents: Dependence of Drug Release on Matrix Structure and Composition of the External Environment.

Although a number of drug-eluting coatings for vascular stents (VSs) have been developed and are in commercial use, more efficient stent coatings and drug delivery systems are needed. Sirolimus (SRL) is a clinically important drug with antiproliferative and immunosuppressive activities that is widely used for coating stents. Here, we characterized SRL-enriched matrices, intended for coating vascular stents, that were produced by electrospinning (ES) on a drum collector from a solution of polycaprolactone (PCL) and human serum albumin (HSA), 1,1,1,3,3,3-hexafluoroisopropanol (HFIP), dimethyl sulfoxide (DMSO), and SRL. The release of tritium-labeled SRL (3H-SRL) from matrices in phosphate-buffered saline (PBS) or human blood plasma (BP) was studied. The introduction of DMSO in the ES blend decreased SRL release. The use of BP significantly accelerated SRL release through binding with serum biomolecules. The exchange of PBS or BP after every time point also increased SRL release. The maximum SRL release in BP was observed at 3 days. The matrices produced from the ES solution with DMSO and HSA released no more than 80% SRL after 27 days in BP, even under medium exchange conditions. Therefore, PCL-based matrices containing HSA, SRL, and DMSO can be used for coating VSs with prolonged SRL delivery.

In Vivo Stability of Polyurethane-Based Electrospun Vascular Grafts in Terms of Chemistry and Mechanics.

The biostability of the polyurethanes Tecoflex EG-80A and Pellethane 2363-80A, used as basic polymers of the vascular grafts (VGs) produced by electrospinning, as well as the tensile strength of Tecoflex VGs, are studied. Solutions of Tecoflex or Pellethane with gelatin and bivalirudin in 1,1,1,3,3,3-hexafluoroisopropanol are used for VG production. After 1, 12, and 24 weeks of VG implantation in the infrarenal position of the abdominal aorta of Wistar rats, VGs are explanted, fixed in formalin, freed from outer tissues, dialyzed, and dried. The polyurethanes are extracted from VGs by dispersion/extraction in tetrahydrofuran (THF) and freed from the excess of THF-insoluble biopolymers. The stability of polyurethanes is assessed by IR spectroscopy and gel permeation chromatography. Pellethane has emerged to be stable at all experimental points. Tecoflex loses approximately 10% of its molecular weight (both Mn and Mw) after 3 months and restored its initial value within 6 months of its functioning as a graft. Mechanical testing demonstrates a 30% reduction in the tensile strength after 3 months in VG and a 10% increase after 6 months. The stability and mechanical properties of polyurethane-based VGs demonstrate their utility for the reconstitution of damaged arteries.

Comparative gene expression profiling of human primary endotheliocytes cultivated on polyurethane-based electrospun 3D matrices and natural decellularized vein.

The formation of a continuous layer of normally functioning endothelium on the lumen surface of small diameter vascular grafts is considered a prerequisite of their long-term functioning without stenosis. Thus, materials supporting not only endothelialization but also the normal functioning state of endotheliocytes are demanded. In this study, we have evaluated the functional state of human umbilical vein endothelial cells (HUVEC) cultivated on the surface of autologous decellularized human umbilical vein and electrospun polyurethane-based matrices by next generation sequencing gene expression profiling. Three types of matrices produced by electrospinning from hexafluoroisopropanol solutions of pure TECOFLEX™ EG-80A polyurethane, polyurethane with gelatin and polyurethane with gelatin and bivalirudin were studied. Cells cultivated on different supports were subjected to RNA-Seq profiling on an Illumina HiSeq platform. The data demonstrated that the structure of 3D matrices and the chemical composition of the fibers have a significant effect on the gene expression profiles of HUVEC. The results suggest that protein-enriched polyurethane-based 3D matrices represent a convenient surface for obtaining a normally functioning endothelial layer.

The Panel of 12 Cell-Free MicroRNAs as Potential Biomarkers in Prostate Neoplasms.

Prostate cancer is a global biological, medical, and social issue aggravated by the lack of reliable, highly specific, and sensitive non-invasive tests for diagnosis and staging of prostate cancer. One prospective source of biomarkers are the cell-free miRNAs present in various biological fluids. In the present study, we validated the diagnostic potential of cell-free miRNAs: miR-19b, miR-22, miR-92a, miR-378, miR-425, miR-30e, miR-31, miR-125b, miR-200b, miR-205, miR-375, and miR-660; we estimated the required sample size and the minimal miRNA set for a subsequent large-scale validation study. Relative expression of 12 miRNA combined in 31 ratios was investigated in three fractions of biological fluids (urine extracellular vesicles, clarified urine, and plasma) obtained from patients with prostate cancer (n = 10), benign prostate hyperplasia (n = 8), and healthy volunteers (n = 11). Eight of the miRNAs found in urine vesicles (miR-19b, miR-30e, miR-31, miR-92a, miR-125, miR-200, miR-205, and miR-660) showed great promise and when combined into six ratios (miR-125b/miR-30e, miR-200/miR-30e, miR-205/miR-30e, miR-31/miR-30e, miR-660/miR-30e, and miR-19b/miR-92a) could classify patients with prostate cancer, benign prostate hyperplasia, and healthy donors with 100% specificity, 100% sensitivity, and with a high degree of reliability for most donors.

General Study and Gene Expression Profiling of Endotheliocytes Cultivated on Electrospun Materials.

Endothelization of the luminal surface of vascular grafts is required for their long-term functioning. Here, we have cultivated human endothelial cells (HUVEC) on different 3D matrices to assess cell proliferation, gene expression and select the best substrate for endothelization. 3D matrices were produced by electrospinning from solutions of poly(D,L-lactide-co-glycolide) (PLGA), polycaprolactone (PCL), and blends of PCL with gelatin (Gl) in hexafluoroisopropanol. Structure and surface properties of 3D matrices were characterized by SEM, AFM, and sessile drop analysis. Cell adhesion, viability, and proliferation were studied by SEM, Alamar Blue staining, and 5-ethynyl-2'-deoxyuridine (EdU) assay. Gene expression profiling was done on an Illumina HiSeq 2500 platform. Obtained data indicated that 3D matrices produced from PCL with Gl and treated with glutaraldehyde provide the most suitable support for HUVEC adhesion and proliferation. Transcriptome sequencing has demonstrated a minimal difference of gene expression profile in HUVEC cultivated on the surface of these matrices as compared to tissue culture plastic, thus confirming these matrices as the best support for endothelization.

Electrospun polyurethane-based vascular grafts: physicochemical properties and functioning in vivo.

General physicochemical properties of the vascular grafts (VGs) produced from the solutions of Tecoflex (Tec) with gelatin (GL) and bivalirudin (BV) by electrospinning are studied. The electrospun VGs of Tec-GL-BV and expanded polytetrafluoroethylene (e-PTFE) implanted in the abdominal aorta of 36 Wistar rats have been observed over different time intervals up to 24 weeks. A comparison shows that 94.5% of the Tec-GL-BV VGs and only 66.6% of e-PTFE VGs (р = 0.0438) are free of occlusions after a 6 month implantation. At the intermediate observation points, Tec-GL-BV VGs demonstrate severe neovascularization of the VG neoadventitial layer as compared with e-PTFE grafts. A histological examination demonstrates a small thickness of the neointima layer and a low level of calcification in Tec-GL-BV VGs as compared with the control grafts. Thus, polyurethane-based protein-enriched VGs have certain advantages over e-PTFE VGs, suggesting their utility in clinical studies.