Microfluidic-assisted preparation of RGD-decorated nanoparticles: exploring integrin-facilitated uptake in cancer cell lines.

This study is about fine tuning the targeting capacity of peptide-decorated nanoparticles to discriminate between cells that express different integrin make-ups. Using microfluidic-assisted nanoprecipitation, we have prepared poly(lactic acid-co-glycolic acid) (PLGA) nanoparticles with a PEGylated surface decorated with two different arginine-glycine-aspartic acid (RGD) peptides: one is cyclic (RGDFC) and has specific affinity towards αvß3 integrin heterodimers; the other is linear (RGDSP) and is reported to bind equally αvß3 and α5ß1. We have then evaluated the nanoparticle internalization in two cell lines with a markedly different integrin fingerprint: ovarian carcinoma A2780 (almost no αvß3, moderate in α5ß1) and glioma U87MG (very high in αvß3, moderate/high in α5ß1). As expected, particles with cyclic RGD were heavily internalized by U87MG (proportional to the peptide content and abrogated by anti-αvß3) but not by A2780 (same as PEGylated particles). The linear peptide, on the other hand, did not differentiate between the cell lines, and the uptake increase vs. control particles was never higher than 50%, indicating a possible low and unselective affinity for various integrins. The strong preference of U87MG for cyclic (vs. linear) peptide-decorated nanoparticles was shown in 2D culture and further demonstrated in spheroids. Our results demonstrate that targeting specific integrin make-ups is possible and may open the way to more precise treatment, but more efforts need to be devoted to a better understanding of the relation between RGD structure and their integrin-binding capacity.

Binding and Internalization in Receptor-Targeted Carriers: The Complex Role of CD44 in the Uptake of Hyaluronic Acid-Based Nanoparticles (siRNA Delivery).

CD44 is an endocytic hyaluronic acid (HA) receptor, and is overexpressed in many carcinomas. This has encouraged the use of HA to design CD44-targeting carriers. This paper is about dissecting the mechanistic role of CD44. Here, HA-decorated nanoparticles are used to deliver siRNA to both tumoral (AsPC-1, PANC-1, HT-29, HCT-116) and non-tumoral (fibroblasts, differently polarized THP-1 macrophages, HUVEC) human cell lines, evaluating the initial binding of the nanoparticles, their internalization rate, and the silencing efficiency (cyclophilin B (PPIB) gene). Tumoral cells internalize faster and experience higher silencing than non-tumoral cells. This is promising as it suggests that, in a tumor, HA nanocarriers may have limited off-target effects. More far-reaching is the inter-relation between the four parameters of the study: CD44 expression, HA binding on cell surfaces, internalization rate, and silencing efficiency. No correlation is found between binding (an early event) and any of the other parameters, whereas silencing correlates both with speed of the internalization process and CD44 expression. This study confirms on one hand that HA-based carriers can perform a targeted action, but on the other it suggests that this may not be due to a selective binding event, but rather to a later recognition leading to selective internalization.

The different ways to chitosan/hyaluronic acid nanoparticles: templated vs direct complexation. Influence of particle preparation on morphology, cell uptake and silencing efficiency.

This study is about linking preparative processes of nanoparticles with the morphology of the nanoparticles and with their efficiency in delivering payloads intracellularly. The nanoparticles are composed of hyaluronic acid (HA) and chitosan; the former can address a nanoparticle to cell surface receptors such as CD44, the second allows both for entrapment of nucleic acids and for an endosomolytic activity that facilitates their liberation in the cytoplasm. Here, we have systematically compared nanoparticles prepared either A) through a two-step process based on intermediate (template) particles produced via ionotropic gelation of chitosan with triphosphate (TPP), which are then incubated with HA, or B) through direct polyelectrolyte complexation of chitosan and HA. Here we demonstrate that HA is capable to quantitatively replace TPP in the template process and significant aggregation takes place during the TPP-HA exchange. The templated chitosan/HA nanoparticles therefore have a mildly larger size (measured by dynamic light scattering alone or by field flow fractionation coupled to static or dynamic light scattering), and above all a higher aspect ratio (R g/R H) and a lower fractal dimension. We then compared the kinetics of uptake and the (antiluciferase) siRNA delivery performance in murine RAW 264.7 macrophages and in human HCT-116 colorectal tumor cells. The preparative method (and therefore the internal particle morphology) had little effect on the uptake kinetics and no statistically relevant influence on silencing (templated particles often showing a lower silencing). Cell-specific factors, on the contrary, overwhelmingly determined the efficacy of the carriers, with, e.g., those containing low-MW chitosan performing better in macrophages and those with high-MW chitosan in HCT-116.

Microfluidic-assisted nanoprecipitation of (PEGylated) poly (d,l-lactic acid-co-caprolactone): Effect of macromolecular and microfluidic parameters on particle size and paclitaxel encapsulation.

In this work we evaluate the effect of polymer composition and architecture of (PEGylated) polyesters on particle size and paclitaxel (PTX) loading for particles manufactured via microfluidic-assisted, continuous-flow nanoprecipitation using two microfluidic chips with different geometries and mixing principles. We have prepared poly (d,l-lactic acid-co-caprolactone) (PLCL) from ring-opening polymerization (ROP) of LA and CL mixtures and different (macro) initiators (namely, 1-dodecanol, a MeO-PEG-OH, and a 4-armed star PEG-OH), rendering polyesters that vary in monomer composition (i.e. LA/CL ratios) and architecture (i.e. linear vs 4-armed star). Continuous-flow nanoprecipitation was assayed using two microfluidic chips: a cross-flow chip with a X-shaped mixing junction (2D laminar flow focusing) and a micromixer featuring a Y-shaped mixing junction and a split and recombine path (2D laminar flow focusing convinced with stream lamination for faster mixing). Nanoparticle formulations were produced with Z-average sizes in the range of 30-160 nm, although size selectivity could be seen for different polymer/chip combinations; for instance, smaller particles were obtained with Y-shaped micromixer (30-120 nm), specially for the PEGylated polyesters (30-50 nm), whereas the cross-flow chip systematically produced larger particles (80-160 nm). Loading of the anti-cancer drug paclitaxel (PTX) was also heavily influenced not only by the nature of the polyester, but also by the geometry of the microfluidic chip; higher drug loadings were obtained with the cross-flow reactor and the star block copolymers. Finally, decreasing the LA/CL ratio generally had a positive effect on drug loading.

Fibroblast migration correlates with matrix softness. A study in knob-hole engineered fibrin.

The invasion of a matrix by migrating cells is a key step in its remodelling. At least in 2D migration models, cells tend to localize in stiffer areas (durotaxis). Here, we show that mechanical properties affect differently the 3D migration rate: non-proteolytic 3D cell migration is facilitated in softer matrices. In these gels, the modulus was varied by introducing defects in fibres, leaving largely intact the nanostructure. The matrices derive from fibrin via functionalization with a bioinert polymer [poly(ethylene glycol), PEG] through an affinity mechanism identical to that presiding to fibrin own self-assembly. Peptidic end groups on PEG were used to bind fibrinogen globular D regions [GPRP (glycine-proline-arginine-proline) for a holes, GHRP (glycine-histidine-arginine-proline) for b holes; Kd evaluated via isothermal titration calorimetry or fluorescence anisotropy]. In a dose-dependent manner, both PEGylated peptides decreased gel stiffness, but most other properties at a macroscopic [e.g., overall elastic character, strain hardening, and high (>0.5) Poisson ratio] or nano/micro level (fibre dimension and pore size) were largely unaffected, suggesting that the softening effect was due to the introduction of defects within fibres, rather than to differences in the network architecture. In these matrices, the key determinant of fibroblast migration was found to be the elastic modulus, rather than the identity or the dose of the PEGylated peptide; softer materials allowed a faster invasion, even if this meant a higher content of non-adhesive PEG. This does not conflict with fibroblast durotaxis (where stiffness controls accumulation but not necessarily the speed of migration) and indicates a way to fine tune the speed of cell colonization.

Nanomanufacturing through microfluidic-assisted nanoprecipitation: Advanced analytics and structure-activity relationships.

We have employed microfluidics (cross-shaped chip) for the preparation of drug-loaded poly(lactic acid-co-glycolic acid) (PLGA) nanoparticles. The polymer precipitates from an acetone solution upon its controlled laminar mixing (flow focusing) with an aqueous solution of a surfactant, allowing for an operator-independent, up-scalable and reproducible preparative process of nanoformulations. Firstly, using PEGylated surfactants we have compared batch and microfluidic processes, and showed the superior reproducibility of the latter and its strong dependency on the acetone/water ratio (flow rate ratio). We have then focused on the issue of purification from free surfactant, and employed advanced characterization techniques such as flow-through dynamic light scattering as the in-line quality control technique, and field flow fractionation (FFF) with dynamic and static light scattering detection, which allowed the detection of surfactant micelles in mixture with nanoparticles (hardly possible with stand-alone dynamic light scattering). Finally, we have shown that the choice of polymer and surfactant affects the release behaviour of a model drug (paclitaxel), with high molecular weight PLGA (RG756) and low molecular weight surfactant (tocopheryl poly(ethylene glycol) 1000 succinate, TPGS) apparently showing higher burst and accelerated release.

Chitosan/Hyaluronic Acid Nanoparticles: Rational Design Revisited for RNA Delivery.

Chitosan/hyaluronic acid (HA) nanoparticles can be used to deliver an RNA/DNA cargo to cells overexpressing HA receptors such as CD44. For these systems, unequivocal links have not been established yet between chitosan macromolecular (molecular weight; degree of deacetylation, i.e., charge density) and nanoparticle variables (complexation strength, i.e., stability; nucleic acid protection; internalization rate) on one hand, and transfection efficiency on the other hand. Here, we have focused on the role of avidity on transfection efficiency in the CD44-expressing HCT-116 as a cellular model; we have employed two differently sized payloads (a large luciferase-encoding mRNA and a much smaller anti-Luc siRNA), and a small library of chitosans (variable molecular weight and degree of deactylation). The RNA avidity for chitosan showed-as expected-an inverse relationship: higher avidity-higher polyplex stability-lower transfection efficiency. The avidity of chitosan for RNA appears to lead to opposite effects: higher avidity-higher polyplex stability but also higher transfection efficiency. Surprisingly, the best transfecting particles were those with the lowest propensity for RNA release, although this might be a misleading relationship: for example, the same macromolecular parameters that increase avidity can also boost chitosan's endosomolytic activity, with a strong enhancement in transfection. The performance of these nonviral vectors appears therefore difficult to predict simply on the basis of carrier- or payload-related variables, and a more holistic consideration of the journey of the nanoparticle, from cell uptake to cytosolic bioavailability of payload, is needed. It is also noteworthy that the nanoparticles used in this study showed optimal performance under slightly acidic conditions (pH 6.4), which is promising for applications in a tumoral extracellular environment. It is also worth pointing out that under these conditions we have for the first time successfully delivered mRNA with chitosan/HA nanoparticles.

Revisiting Boronate/Diol Complexation as a Double Stimulus-Responsive Bioconjugation.

This study presents a quantitative assessment of the complexation between boronic acids and diols as a reversible and double-stimulus (oxidation and acidification)-responsive bioconjugation reaction. First, by using a competition assay, we have evaluated the equilibrium constants (water, pH 7.4) of 34 boronate/diol pairs, using diols of both aliphatic and aromatic (catechols) nature; in general, catechols were characterized by constants 3 orders of magnitude higher than those of aliphatic diols. Second, we have demonstrated that successful complexation with diols generated in situ via enzymatic reactions, and the boronate complexation was also employed to calculate the Michaelis-Menten parameters for two catechol-producing reactions: the demethylation of 3-methoxytyramine and the 2-hydroxylation of estradiol, respectively, mediated by P4502D6 and P4501A2. Third, we have prepared phenylboronic acid-functionalized hyaluronic acid (HA) and demonstrated the pH and H2O2-responsive character of the adducts that it formed with Alizarin Red S (ARS) used as a model catechol. The versatility and selectivity of the complexation and the mild character of the chemical species involved therefore make the boronate/catechol reaction an interesting candidate for bioconjugation purposes.

Hyaluronan/Tannic Acid Nanoparticles Via Catechol/Boronate Complexation as a Smart Antibacterial System.

Nanoparticles based on hyaluronic acid (HA) are designed to deliver tannic acid (TA) as an antimicrobial agent. The presence of HA makes these particles potentially useful to target bacteria that colonize cells presenting HA membrane receptors (e.g. CD44), such as macrophages. HA bearing 3-aminophenyl boronic acid groups (HA-APBA) is reacted with TA, yielding nanoparticles with a size that decreases with decreasing HA molecular weight (e.g. 200 nm for 44 kDa, 400 nm for 737 kDa). The boronate esters make the nanoparticles stable at physiological pH, but their hydrolysis in an acidic environment (pH = 5) leads to swelling/solubilization, therefore potentially allowing TA release in endosomal compartments. We have assessed the nanoparticle toxicity profile (on RAW 264.7 macrophages) and their antimicrobial activity (on E. coli and on both methicillin-sensitive and -resistant S. aureus). The antibacterial effect of HA-APBA/TA nanoparticles was significantly higher than that of TA alone, and has very similar activity to TA coformulated with a reducing agent (ascorbic acid), which indicates both the nanoparticles to protect TA catechols from oxidation, and the effective release of TA after nanoparticle internalization. Therefore, there is potential for these nanoparticles to be used in stable, effective, and potentially targetable nanoparticle-based antimicrobial formulations.

Anti-tumor efficacy of chitosan-g-poly(ethylene glycol) nanocapsules containing docetaxel: anti-TMEFF-2 functionalized nanocapsules vs. non-functionalized nanocapsules.

The development and evaluation of PEGylated chitosan (CS) nanocapsules (NCs) conjugated to a monoclonal antibody anti-TMEFF-2 (CS-PEG-anti-TMEFF-2 mAb NCs) for targeted delivery of docetaxel (DCX) is presented. CS-PEG-Biotin NCs, displaying biotin tags at their surface, were obtained and efficiently functionalized with an anti-TMEFF-2 mAb through a convenient avidin-biotin approach. Cell cycle analysis after treatment with different DCX-loaded CS-PEG NC formulations indicated that the encapsulated drug remained fully active, showing a similar functional behavior to free DCX. In vivo efficacy studies using a non-small cell lung carcinoma xenograft revealed that CS-PEG-anti-TMEFF-2 NCs resulted as effective as free DCX (Taxotere®). Interestingly, differences on the pharmacodynamic behavior among the different DCX formulations were observed. Thus, while free DCX exhibited a fast and short effect on tumor volume reduction, CS-PEG-anti-TMEFF-2 mAb NCs showed a delayed and prolonged action, with no significant side effects of treatments.

End-group rearrangements in poly(propylene sulfide) matrix-assisted laser desorption/ionization time-of-flight analysis. Experimental evidence and possible mechanisms.

RATIONALE: Polysulfides [poly(1,2-alkylene sulfides)] are oxidation-responsive polymers that are finding application in drug release and biomaterials. The precise knowledge of their macromolecular characteristics is of the essence in view of their application to biological systems. METHODS: Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) with and without silver trifluoroacetate was used to characterize a series of polymers with increasing molecular weight in the range 1000-4000 g/mol and with low polydispersity (<1.12). RESULTS: Well-resolved peaks and accurate mass-measured values were obtained using a 2-(4-hydroxyphenylazo)benzoic acid (HABA) matrix, but significant fragmentations took place in the absence of silver as a cationizing reagent. Elimination reactions appeared to occur at terminal groups and limited depolymerization could be recorded. Interestingly, the most common fragmentation pathway seemed to be based on an as-yet-unreported process of hydrogen transfer requiring the presence both of ester groups and of thioethers. CONCLUSIONS: The use of an appropriate cationizing reagent (silver trifluoroacetate) appeared to suppress end-group eliminations; we hypothesize that this action is based on the involvement of the terminal groups in silver chelation.

Click chemistry with polymers, dendrimers, and hydrogels for drug delivery.

During the last decades, great efforts have been devoted to design polymers for reducing the toxicity, increasing the absorption, and improving the release profile of drugs. Advantage has been also taken from the inherent multivalency of polymers and dendrimers for the incorporation of diverse functional molecules of interest in targeting and diagnosis. In addition, polymeric hydrogels with the ability to encapsulate drugs and cells have been developed for drug delivery and tissue engineering applications. In the long road to this successful story, pharmaceutical sciences have been accompanied by parallel advances in synthetic methodologies allowing the preparation of precise polymeric materials with enhanced properties. In this context, the introduction of the click concept by Sharpless and coworkers in 2001 focusing the attention on modularity and orthogonality has greatly benefited polymer synthesis, an area where reaction efficiency and product purity are significantly challenged. The purpose of this Expert Review is to discuss the impact of click chemistry in the preparation and functionalization of polymers, dendrimers, and hydrogels of interest in drug delivery.

Click chemistry for drug delivery nanosystems.

The purpose of this Expert Review is to discuss the impact of click chemistry in nanosized drug delivery systems. Since the introduction of the click concept by Sharpless and coworkers in 2001, numerous examples of click reactions have been reported for the preparation and functionalization of polymeric micelles and nanoparticles, liposomes and polymersomes, capsules, microspheres, metal and silica nanoparticles, carbon nanotubes and fullerenes, or bionanoparticles. Among these click processes, Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) has attracted most attention based on its high orthogonality, reliability, and experimental simplicity for non-specialists. A renewed interest in the use of efficient classical transformations has been also observed (e.g., thiol-ene coupling, Michael addition, Diels-Alder). Special emphasis is also devoted to critically discuss the click concept, as well as practical aspects of application of CuAAC to ensure efficient and harmless bioconjugation.

Reliable and efficient procedures for the conjugation of biomolecules through Huisgen azide-alkyne cycloadditions.

The Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) has been established as a powerful coupling technology for the conjugation of proteins, nucleic acids, and polysaccharides. Nevertheless, several shortcomings related to the presence of Cu, mainly oxidative degradation by reactive oxygen species and sample contamination by Cu, have been pointed out. This Minireview discusses key aspects found in the development of the efficient and benign functionalization of biomacromolecules through CuAAC, as well as the Cu-free strain-promoted azide-alkyne cycloaddition (SPAAC).

The stereochemistry of 1,2,3-triols revealed by 1H NMR spectroscopy: principles and applications.

The conformational compositions of the tris(alpha-methoxy-alpha-phenylacetic acid) ester derivatives of 1,2,3-prim,sec,sec-triols are presented. These conformations have been determined by theoretical and experimental data (i.e., energy- and chemical-shift calculations, circular dichroism (CD) experiments, coupling-constant analysis, enantioselective deuteration experiments, and low-temperature NMR spectroscopic studies). A detailed analysis of the anisotropic effects due to the most significant conformers in the (1)H NMR spectra supported the correlation between the (1)H NMR spectra (Delta delta(RS) value of H(3') and |Delta(Delta delta(RS))| parameters) and the absolute configuration of the substrate. The study also allows the identification of the pro-R and pro-S methylene protons from their vicinal coupling constants and relative chemical shifts.

Surpassing the use of copper in the click functionalization of polymeric nanostructures: a strain-promoted approach.

The limitations (depolymerization and Cu contamination) in the use of Cu(I)-catalyzed azide-alkyne [3 + 2] cycloadditions (CuAAC) for the selective click functionalization of polysaccharide-based systems have been efficiently surpassed using a strain-promoted approach (SPAAC). The SPAAC decoration of chitosan-g-poly(ethylene glycol) nanostructures with an immunoglobulin G under physiological conditions represents a step forward in the preparation of immunonanoparticles.

The 1H NMR method for the determination of the absolute configuration of 1,2,3-prim,sec,sec-triols.

The absolute configuration of 1,2,3-prim,sec,sec-triols can be assigned by comparison of the 1H NMR spectra of the tris-(R)- and the tris-(S)-MPA ester derivatives. An experimental demonstration of this correlation with 24 triols of known absolute configuration and a protocol using two parameters-Deltadelta(RS)(H3) and the difference between Deltadelta RS (H2) and Deltadelta RS (H3) = absolute value (Delta(Deltadelta RS))-for its application to the determination of the absolute configuration of other triols are presented.