Analysis of protamine peptides in insulin pharmaceutical formulations by capillary electrophoresis.

Protamines are a group of highly basic peptides that are sometimes added to insulin formulations to prolong the pharmacological action. In this study, different methods were investigated to identify protamine in insulin formulations. Capillary electrophoresis in aqueous and non-aqueous media was tested to separate these peptides with very close amino acid sequences. Different buffers (phosphate or formate, both acidified) and various additives (principally negatively charged and neutral surfactants) were investigated to optimize peptide separation. Finally, a micellar electrokinetic capillary chromatography method using a capillary of 120 cm effective length and an aqueous background electrolyte made up of 100 mM phosphate buffer (pH 2) and 50 mM Thesit® gave the best results, providing the separation of the four major protamine peptides within 25 min.

Fully automated electrophoretically mediated microanalysis for CYP1A1 activity monitoring optimized by multivariate approach.

In this study, a fully automated incapillary system was developed to monitor the activity of CYP1A1 (Cytochrome P450, family 1, subfamily A, polypeptide 1) in physiological conditions. Ethoxycoumarin, the selected substrate, undergoes an inline bioreaction in the presence of CYP1A1 supersomes and Nicotinamide adenine dinucleotide phosphate reduced as cofactor, giving rise to hydroxycoumarin, the product that was assayed. The optimization of the experimental conditions was supported by the application of a design of experiment, providing a better understanding of electrophoretic mixing parameters that influence the metabolic reactions. The results obtained in optimal conditions were compared not only to those achieved after offline metabolization but also with liver microsomes. Finally, inhibition studies were conducted showing an important decrease of hydroxycoumarin formation using apigenin as CYP1A1 potent inhibitor. This study demonstrates the usefulness of our inline system for the fully automated in vitro metabolism studies and the screening of new CYP1A1 inhibitors.

Separation of human, bovine, and porcine insulins, three very closely related proteins, by micellar electrokinetic chromatography.

Human, bovine, and porcine insulins are small proteins with very closely related amino acid sequences, which makes their separation challenging. In this study, we took advantage of the high-resolution power of CE, and more particularly of micellar electrokinetic chromatography, to separate those biomolecules. Among several surfactants, perfluorooctanoic acid ammonium salt was selected. Then, using a design of experiments approach, the optimal BGE composition was found to consist of 50 mM ammonium acetate pH 9.0, 65 mM perfluorooctanoic acid ammonium salt, and 4% MeOH. The three insulins could be separated within 12 min with a satisfactory resolution. This method could be useful to detect possible counterfeit pharmaceutical formulations. Indeed, it would be easy to determine if human insulin was replaced by bovine or porcine insulin.

Simultaneous determination of insulin and its analogues in pharmaceutical formulations by micellar electrokinetic chromatography.

A simple and efficient MEKC method was developed to simultaneously determine human insulin, its five analogues, the main degradation products and the excipients usually present in injection formulations. A very fast method with a total analysis time of 3 min was then successfully validated for the analysis of human insulin and the quality control of commercial formulations was carried out.

In-capillary derivatization with (-)-1-(9-fluorenyl)ethyl chloroformate as chiral labeling agent for the electrophoretic separation of amino acids.

An original micellar electrokinetic chromatography (MEKC) method using in-capillary derivatization with a chiral labeling reagent was developed for the separation of amino acid (AA) derivatives. The potential of (-)-1-(9-fluorenyl)-ethyl chloroformate (FLEC) as in-capillary derivatization agent is described for the first time. Several parameters for in-capillary derivatization and subsequent MEKC separation were systematically investigated using experimental designs. Firstly experimental conditions for in-capillary derivatization were optimized using face-centered central composite design (FCCD). Mixing voltage and time as well as concentration of the labeling solution were investigated. Efficient labeling was achieved by sequential injection of AAs and FLEC labeling solution followed by the application of a voltage of 0.2 kV for 570 s. The background electrolyte (BGE) composition was then optimized in order to achieve selectivity. A FCCD was performed with two factors, namely the sodium dodecyl sulfate (SDS) concentration and the percentage of propan-2-ol (IPA). The separation of 12 pairs of derivatized AA (FLEC-AA) diastereomers was achieved with resolution values comprised between 3 and 20. Furthermore, an efficient derivatization and separation of 29 FLEC-AA derivatives were achieved in a single run using a buffer made up of 40 mM sodium tetraborate, 21 mM SDS and 8.5% IPA. The method was successfully applied to the analysis of spiked artificial cerebrospinal fluid (aCSF) sample.

Development of a generic micellar electrokinetic chromatography method for the separation of 15 antimalarial drugs as a tool to detect medicine counterfeiting.

Since antimalarial drugs counterfeiting is dramatically present on the African market, the development of simple analytical methods for their quality control is of great importance. This work consists in the CE analysis of 15 antimalarials (artesunate, artemether, amodiaquine, chloroquine, piperaquine, primaquine, quinine, cinchonine, mefloquine, halofantrine, sulfadoxine, sulfalen, atovaquone, proguanil, and pyrimethamine). Since all these molecules cannot be ionized at the same pH, MEKC was preferred because it also allows separation of neutral compounds. Preliminary experiments were first carried out to select the most crucial factors affecting the antimalarials separation. Several conditions were tested and four parameters as well as their investigation domain were chosen: pH (5-10), SDS concentration (20-90 mM), ACN proportion (10-40%), and temperature (20-35°C). Then, the experimental design methodology was used and a central composite design was selected. Mathematical modeling of the migration times allowed the prediction of optimal conditions (29°C, pH 6.6, 29 mM SDS, 36% ACN) regarding analyte separation. The prediction at this optimum was verified experimentally and led to the separation of 13 compounds within 8 min. Finally, the method was successfully applied to the quality control of African antimalarial medicines for their qualitative and quantitative content.

Chemo- and enantio-selective method for the analysis of amino acids by capillary electrophoresis with in-capillary derivatization.

A novel dual chiral CE method was developed for the separation of l- and d-amino acids (AAs), using in-capillary derivatization with 9-fluoroenylmethyl chloroformate (FMOC). Firstly, using pre-column derivatization, the enantioseparation of FMOC-AAs was optimized according to the nature of cyclodextrins (CD). A background electrolyte (BGE) composed of 30 mM ß-CD, 30 mM octakis(2,3-dihydroxy-6-O-sulfo)-γ-CD (OS-γ-CD), 40 mM tetraborate and 15% isopropanol (IPA) was selected and led to 17 baseline resolved pairs (R(s)=1.7-5.8) and two partially resolved pairs (Lys, R(s)=0.5 and Arg, R(s)=1.2). Experimental conditions for in-capillary derivatization were then optimized. Several parameters, such as mixing voltage and time, concentration of labeling solution and the length of the spacer plug were studied. The optimal conditions for in-capillary derivatization procedure were obtained using successive hydrodynamic injections (30 mbar) of AAs for 2s, borate buffer for 4s and 10mM FMOC solution for 6s, followed by a mixing at 3 kV for 72 s and wait time of 1 min. Moreover, a particular attention was paid to improve separation chemoselectivity. The effect on stereoselectivity and chemoselectivity of different factors, such as decrease of pH and tetraborate concentration and the addition of sodium dodecyl sulfate (SDS), was investigated using the in-capillary derivatization procedure. The best separation of a standard mixture of ten AA racemates was observed using a BGE containing 30 mM ß-CD, 30 mM OS-γ-CD, 25 mM SDS, 40 mM sodium tetraborate and 17% IPA.

Micellar electrokinetic chromatography systems for the separation of mixtures of charged and uncharged compounds.

In this study, the migration behavior of charged and uncharged analytes was investigated under different conditions. Effective mobilities - electrophoretic mobilities under the influence of micelles - of cations, anions, and neutrals were measured at neutral, basic, and acidic pH (7.5, 11, and 2.2) using background electrolytes containing different sodium dodecyl sulfate (SDS) concentrations (0-90 mM) and acetonitrile (ACN) proportions (0-75%). SDS concentration and ACN proportion were found to have a tremendous effect on the effective mobilities and migration order of the model compounds. Although the SDS micelles preferably interact with neutrals and cations, hydrophobic bonds can also occur with anions. Cations, anions, and neutrals having rather different migration behaviors, it is possible to considerably enhance the selectivity of the method by adjusting properly the SDS concentration and the ACN proportion. These observations confirm the interest of using micellar electrokinetic chromatography not only for the separation of neutral substances but also to analyze charged compounds.

Contractile and electrophysiological properties of pulmonary artery smooth muscle are not altered in TASK-1 knockout mice.

The acid-sensitive, two-pore domain K+ channel, TASK-1, contributes to the background K+ conductance and membrane potential (Em) of rat and human pulmonary artery smooth muscle cells (PASMCs), but its role in regulating tone remains elusive. This study aimed to clarify the role of TASK-1 by determining the functional properties of pulmonary artery (PA) from mice in which the TASK-1 gene was deleted (TASK-1/3 KO), in comparison with wild-type (WT) C57BL/6 controls. Small vessel wire myography was used to measure isometric tension developed by intact PA. Em and currents were recorded from freshly isolated PASMCs using the perforated patch-clamp technique. Reverse transcription-polymerase chain reaction (RT-PCR) was used to estimate K+ channel expression. We could find no difference between PA from WT and TASK-1/3 KO mice. They showed similar constrictor responses to a range of agonists and K+ concentrations, the K+ channel blockers 4-aminopyridine, tetraethylammonium ions and XE991. Treprostinil, proposed to dilate by activating TASK-1, was just as effective in TASK-1/3 KO arteries. Blocking Ca2+ influx with nifedipine (1 µM) or levcromakalim (10 µM) had no effect on resting tone in either strain. The resting Em of PASMCs and its responses to K+ channel blockers were unchanged in TASK-1/3 KO mice as were voltage-activated K+ currents, including the non-inactivating K+ current (IKN) measured at 0 mV. The Em was, however, depolarised in comparison with other species.Mouse IKN was much smaller than in rat and showed no sensitivity to pH. The results imply that TASK-1 does not form a functional channel in mouse PASMCs.