Development and optimization of a new tioconazole vaginal mucoadhesive film using an experimental design strategy. Physicochemical and biological characterization.

A new tioconazole (TCZ) mucoadhesive film, based on a biodegradable chitosan/ hydroxypropyl methylcellulose (CH/HPMC) blend, was developed for treatment of vaginal candidiasis. The formulation was optimized through an I-optimal design (minimizing the integral of the prediction variance across the factor space), where the impact of the proportion of the ingredients and processing variables on the quality of the final product was evaluated. Both, the thickness of the film and the swelling index, which affect patients' comfort and compliance, were considered. Mechanical testing, such as load at break, elongation at break, and mucoadhesive strength were also included as dependent variables. The optimal mucoadhesive film formulation, which should be obtained at a drying temperature of 30 °C, was found to include the combination of CH and HPMC (forming polymers) at 0.25:0.75 ratio, a mixture of polyethylene glycol 400 and propylene glycol as plasticizers (0.07:0.93, 5% w/w), and TCZ loaded at 15 % w/w. The optimal preparation was subjected to exhaustive characterization studies, which revealed that the drug was entrapped in the polymeric matrix in an amorphous state and that the film exhibited a smooth and uniform surface, demonstrating excellent component compatibility. In vitro tests showed that the formulation has an excellent time to kill value (3 min) and lacks cytotoxicity, suggesting that it should be highly effective and safe.

Effect of sex and genotype of the host on the anthelmintic efficacy of albendazole microcrystals, in the CBi-IGE Trichinella infection murine model.

Albendazole (ABZ) is an anthelmintic pharmaceutical commonly used in the treatment of nematode infections. It is a Class II drug poorly water-soluble, with very low bioavailability, a feature particularly limiting to treat the trichinellosis chronic phase. Microcrystals obtained by controlled precipitation using hydroxyethyl cellulose and chitosan have previously been shown to improve ABZ biopharmaceutical properties. This investigation aimed to test the systems' in vivo efficacy in the CBi-IGE murine model of Trichinella spiralis infection in the infection's different phases and parasite' stages. Treatment in the enteral phase led to a 90% decrease in the larval muscle load, probably due to its effect on T. spiralis female fecundity. Both microcrystal systems given in the migratory phase halved muscle load in males, a response not observed in females. The chitosan-based microcrystals proved to be the best when administered in the chronic phase of the infection ­ an increased proportion of L1 dead larvae was found compared to controls, except in CBi+-treated females. Males and females from the highly susceptible CBi+ line presented a significantly different treatment response in this phase. In vivo efficacy depended on the host genotype and sex and was related to the parasite cycle stage in which the formulations were administered.

Effect of Genotype and Sex of the Host on the Bioavailability of Novel Albendazole Microcrystals Based on Chitosan and Cellulose Derivatives.

Albendazole (ABZ), an anthelmintic compound widely used in the treatment of systemic nematode infections, is included in the list of class II drugs based on the Biopharmaceutical Classification System. ABZ has limited effectiveness due to its poor water solubility and consequent low bioavailability. Bioavailability of novel ABZ microcrystals based on hydroxyethylcellulose (S4A) or chitosan (S10A) was studied in male and female mice of two inbred lines, from the murine CBi-IGE model of trichinellosis, differing in susceptibility to this parasitosis (line CBi/L, resistant; line CBi+, susceptible). ABZ microcrystals were administered orally, and albendazole sulfoxide (ABZSO) was quantified in plasma by high-performance liquid chromatography. Mice given the microcrystals showed a significant increase in maximum plasmatic concentration (Cmax) compared with those receiving pure ABZ (P < 0.01). In both genotypes, males and females given S4A had higher Cmax than those receiving S10A (P < 0.05). CBi/L showed a greater Cmax than CBi+ (significantly different only in females treated with S4A (P = 0.001)). CBi/L females attained a higher Cmax than males (P < 0.05). No sex effect was observed for this variable in CBi+ (P > 0.05). The results of the pharmacokinetic analysis indicate that the microcrystalline formulations optimize ABZ bioavailability, both in males and females, S4A being the best system in CBi/L mice and S10A in CBi+. In summary, the microcrystals increased ABZ bioavailability, and under the conditions of this investigation, both host genotype and sex influenced the pharmacokinetic parameters measured.

A Novel Prototype Device for Microencapsulation of Benznidazole: In Vitro/In Vivo Studies.

This study was aimed to design a simple and novel prototype device for the production of polymeric microparticles. To prove the effectiveness of this device, benznidazole microparticles using chitosan as carrier and NaOH, KOH, or SLS as counter ions were used. For comparison, benznidazole microparticles were prepared by the conventional dripping technique (syringe and gauge) using the same excipients. Microparticles were characterized in terms of encapsulation efficiency, particle shape, size and surface topography, crystallinity characteristics, thermal behavior, and dissolution rate. Then, the pharmacokinetic parameters were evaluated after the oral administration of the microparticles to healthy Wistar rats. The prepared formulations, by means of this device, showed good drug encapsulation efficiency (> 70%). Release studies revealed an increased dissolution of benznidazole from chitosan microparticles prepared using the novel device. It achieved more than 90% in 60 min, while those of the conventional microparticles and raw drug achieved 65% and 68%, respectively, during the same period. Almost spherical benznidazole microparticles with a smooth surface and size around 10-30 µm were observed using scanning electron microscopy. Thermal analysis and X-ray diffraction studies suggested a partial reduction of drug crystallinity. Moreover, the relative oral bioavailability of the novel benznidazole microparticles showed that the area under the curve for the microencapsulated drug was 10.3 times higher than the raw drug. Thus, these findings indicate that the designed glass prototype device is a useful alternative to formulate benznidazole polymeric microparticles with improved biopharmaceutical properties and could be useful for other therapeutic microparticulate systems.

Preparation, Physicochemical Characterization and In Vitro and In Vivo Activity Against Heligmosomoides polygyrus of Novel Oral Formulations of Albendazole and Mebendazole.

Albendazole (ABZ) and mebendazole (MBZ) are the 2 most commonly used drugs in the treatment of soil-transmitted helminth infections in humans, but their performance is hampered by low solubility and physicochemical properties. We developed different formulations (ß-cyclodextrin inclusion complexes, chitosan-based microcrystals (CH), and polyvinyl alcohol and polysorbate 80-based nanoparticles [P80]) of ABZ and MBZ with an improved in vitro solubility profile and tested their activities in vitro and in vivo against the hookworm Heligmosomoides polygyrus. We found that all formulations tested showed a faster and higher dissolution level and were more active than the standard drugs. When compared to ABZ, ABZ-P80 revealed the highest improvement in terms of solubility increase (4-fold increase) and in vivo activity (an ED50 of 7.0 mg/kg for ABZ and of 4.1 mg/kg for ABZ-P80). Although the activity of MBZ was in all cases lower than ABZ, the improved formulations of MBZ performed better than standard MBZ, where MBZ-CH showed a significantly higher in vivo activity (ED50 of 8.02 mg/kg vs. an ED50 of 203 mg/kg for MBZ). In this work, we identified MBZ-CH and ABZ-P80 formulations as lead formulations hence further studies should be conducted.

Design and Characterization of Chitosan Nanoformulations for the Delivery of Antifungal Agents.

Among different Candida species triggering vaginal candidiasis, Candida albicans is the most predominant yeast. It is commonly treated using azole drugs such as Tioconazole (TIO) and Econazole (ECO). However, their low water solubility may affect their therapeutic efficiency. Therefore, the aim of this research was to produce a novel chitosan nanocapsule based delivery system comprising of TIO or ECO and to study their suitability in vaginal application. These systems were characterized by their physicochemical properties, encapsulation efficiency, in vitro release, storage stability, cytotoxicity, and in vitro biological activity. Both nanocapsules loaded with TIO (average hydrodynamic size of 146.8 ± 0.8 nm, zeta potential of +24.7 ± 1.1 mV) or ECO (average hydrodynamic size of 127.1 ± 1.5 nm, zeta potential of +33.0 ± 1.0 mV) showed excellent association efficiency (99% for TIO and 87% for ECO). The analysis of size, polydispersity index, and zeta potential of the systems at 4, 25, and 37 °C (over a period of two months) showed the stability of the systems. Finally, the developed nanosystems presented fungicidal activity against C. albicans at non-toxic concentrations (studied on model human skin cells). The results obtained from this study are the first step in the development of a pharmaceutical dosage form suitable for the treatment of vaginal candidiasis.

New approaches to identification and characterization of tioconazole in raw material and in pharmaceutical dosage forms.

Tioconazole (TCZ), a broad-spectrum antifungal agent, has significant activity against Candida albicans and other Candida species, and therefore, it is indicated for the topical treatment of superficial mycoses. The main goal of this work is to report an exhaustive identification and characterization procedure to improve and facilitate the online quality control and continuous process monitoring of TCZ in bulk material and loaded in two different dosage forms: ovules and nail lacquer. The methodologies were based on thermal (differential scanning calorimetry (DSC), melting point, and thermogravimetry (TG)), spectroscopic (ultraviolet (UV), Raman, near infrared (NIR), infrared spectroscopy coupled to attenuated total reflectance (FTIR-ATR), and nuclear magnetic resonance (NMR)), microscopic and X-ray diffraction (XRD). The TCZ bulk powder showed a high crystallinity, as observed by XRD, with a particles size distribution (3-95 µm) resolved by microscopic measurements. TCZ melting point (82.8 °C) and a degradation peak centered at 297.8 °C were obtained by DSC and DTG, respectively. An unambiguous structure elucidation of TCZ was obtained by mono- and two- dimensional 1H and 13C NMR spectral data analysis. The FTIR-ATR, Raman and NIR spectra of both the raw material and the commercial products were analyzed and their characteristic bands were tabulated. The best methods for TCZ identification in ovules were DSC, TG, XRD, NIR and Raman, while NIR and FTIR-ATR were the most appropriate techniques to analyze it in the nail lacquer. DSC, TG, DRX, Raman, FTIR-ATR and NIR spectroscopy are effective techniques to be used in online process analysis, because they do not require sample preparation, and they are considerably sensitive to analyze complex samples.

Chitosan-hydroxypropyl methylcellulose tioconazole films: A promising alternative dosage form for the treatment of vaginal candidiasis.

Vaginal candidiasis is considered a frequent opportunistic mucosal infection and the second most common cause of vaginitis after bacterial vaginosis. In this work, different vaginal films based on chitosan, hydroxypropyl methylcellulose and blends of these polymers containing tioconazole, were developed and thoroughly characterized to improve the conventional therapeutics of vaginal candidiasis. Mechanical properties, swelling, adhesiveness, morphology, antifungal activity, hemocompatibility and cytotoxicity were evaluated. The drug solid state in the films was analyzed by thermal and X-ray diffraction analysis. Films showed homogeneous surfaces and presented similar mechanical properties and adhesiveness. Time-kill studies displayed that films were more active than both tioconazole pure drug and traditional tioconazole ovule against Candida albicans, which is probably related to the fact that tioconazole is in amorphous state inside the films. Although all formulations proved to be hemocompatible, films based only on chitosan exhibited a certain degree of cytotoxicity and therefore they should be avoided. The system based on chitosan-hydroxypropyl methylcellulose with 40% PEG 400 as plasticizer presented fast antimicrobial activity as well as the lowest swelling. Additionally, this formulation did not produce substantial hemolytic and cytotoxic effects, indicating that films based on chitosan-hydroxypropyl methylcellulose could be a promising alternative dosage form for the treatment of vaginal candidiasis.

Application of Fluorescence Emission for Characterization of Albendazole and Ricobendazole Micellar Systems: Elucidation of the Molecular Mechanism of Drug Solubilization Process.

Albendazole (ABZ) and ricobendazole (RBZ) are referred to as class II compounds in the Biopharmaceutical Classification System. These drugs exhibit poor solubility, which profoundly affects their oral bioavailability. Micellar systems are excellent pharmaceutical tools to enhance solubilization and absorption of poorly soluble compounds. Polysorbate 80 (P80), poloxamer 407 (P407), sodium cholate (Na-C), and sodium deoxycholate (Na-DC) have been selected as surfactants to study the solubilization process of these drugs. Fluorescence emission was applied in order to obtain surfactant/fluorophore (S/F) ratio, critical micellar concentration, protection efficiency of micelles, and thermodynamic parameters. Systems were characterized by their size and zeta potential. A blue shift from 350 to 345 nm was observed when ABZ was included in P80, Na-DC, and Na-C micelles, while RBZ showed a slight change in the fluorescence band. P80 showed a significant solubilization capacity: S/F values were 688 for ABZ at pH 4 and 656 for RBZ at pH 6. Additionally, P80 micellar systems presented the smallest size (10 nm) and their size was not affected by pH change. S/F ratio for bile salts was tenfold higher than for the other surfactants. Quenching plots were linear and their constant values (2.17/M for ABZ and 2.29/M for RBZ) decreased with the addition of the surfactants, indicating a protective effect of the micelles. Na-DC showed better protective efficacy for ABZ and RBZ than the other surfactants (constant values 0.54 and 1.57/M, respectively), showing the drug inclusion into the micelles. Entropic parameters were negative in agreement with micelle formation.

Development and Evaluation of Buccal Films Based on Chitosan for the Potential Treatment of Oral Candidiasis.

In this work, chitosan films were prepared by a casting/solvent evaporation methodology using pectin or hydroxypropylmethyl cellulose to form polymeric matrices. Miconazole nitrate, as a model drug, was loaded into such formulations. These polymeric films were characterized in terms of mechanical properties, adhesiveness, and swelling as well as drug release. Besides, the morphology of raw materials and films was investigated by scanning electron microscopy; interactions between polymers were analyzed by infrared spectroscopy and drug crystallinity studied by differential scanning calorimetry and X-ray diffraction. In addition, antifungal activity against cultures of the five most important fungal opportunistic pathogens belonging to Candida genus was investigated. Chitosan:hydroxypropylmethyl cellulose films were found to be the most appropriate formulations in terms of folding endurance, mechanical properties, and adhesiveness. Also, an improvement in the dissolution rate of miconazole nitrate from the films up to 90% compared to the non-loaded drug was observed. The in vitro antifungal activity showed a significant activity of the model drug when it is loaded into chitosan films. These findings suggest that chitosan-based films are a promising approach to deliver miconazole nitrate for the treatment of candidiasis.

Albendazole Microcrystal Formulations Based on Chitosan and Cellulose Derivatives: Physicochemical Characterization and In Vitro Parasiticidal Activity in Trichinella spiralis Adult Worms.

The oral route has notable advantages to administering dosage forms. One of the most important questions to solve is the poor solubility of most drugs which produces low bioavailability and delivery problems, a major challenge for the pharmaceutical industry. Albendazole is a benzimidazole carbamate extensively used in oral chemotherapy against intestinal parasites, due to its extended spectrum activity and low cost. Nevertheless, the main disadvantage is the poor bioavailability due to its very low solubility in water. The main objective of this study was to prepare microcrystal formulations by the bottom-up technology to increase albendazole dissolution rate, in order to enhance its antiparasitic activity. Thus, 20 novel microstructures based on chitosan, cellulose derivatives, and poloxamer as a surfactant were produced and characterized by their physicochemical properties and in vitro biological activity. To determine the significance of type and concentration of polymer, and presence or absence of surfactant in the crystals, the variables area under the curve, albendazole microcrystal solubility, and drug released (%) at 30 min were analyzed with a three-way ANOVA. This analysis indicated that the microcrystals made with hydroxyethylcellulose or chitosan appear to be the best options to optimize oral absorption of the active pharmaceutical ingredient. The in vitro evaluation of anthelmintic activity on adult forms of Trichinella spiralis identified system S10A as the most effective, of choice for testing therapeutic efficacy in vivo.

Unexpected solvent impact in the crystallinity of praziquantel/poly(vinylpyrrolidone) formulations. A solubility, DSC and solid-state NMR study.

The saturation solubility of PVP:PZQ physical mixtures (PMs) and solid dispersions (SDs) prepared from ethanol (E/E) or ethanol/water (E/W) by the solvent evaporation method at 1:1, 2:1 and 3:1 ratio (w/w) was determined. The presence of PVP improves the solubility of PZQ (0.31±0.01mg/mL). A maximum of 1.29±0.03mg/mL of PZQ in solution was achieved for the 3:1 SD (E/E). The amount of PZQ in solution depends on the amount of polymer and on the preparation method. Solid-state NMR (ssNMR) and DSC were used to understand this behavior. Results show that PMs are a mixture of crystalline PZQ with the polymer, while SDs show different degrees of drug amorphization depending on the solvent used. For E/W SDs, PZQ exists in amorphous and crystalline states, with no clear correlation between the amount of crystalline PZQ and the amount of PVP. For E/E SDs, formulations with a higher percentage of PZQ are amorphous with the components miscible in domains larger than 3nm ((1)H ssNMR relaxation measurements). Albeit its higher saturation solubility, the 3:1 E/E PVP:PZQ sample has a significant crystalline content, probably due to the water introduced by the polymer. High PVP content and small crystal size account for this result.

Promising applications in drug delivery systems of a novel ß-cyclodextrin derivative obtained by green synthesis.

An efficient and green method has been developed for the synthesis of succinyl-ß-cyclodextrin in aqueous media obtaining very good yield. Acidic groups have been introduced in the synthesized carrier molecule to improve the guest-host affinity. To evaluate the suitability of the novel excipient focused to develop oral dosage forms, albendazole, a BSC class II compound, was chosen as a model drug. The ß-cyclodextrin derivative and the inclusion complex were thoroughly characterized in solution and solid state by phase solubility studies, FT-IR spectroscopy, SEM, XRD, ESI-MS, DSC, 1D (1)H NMR, 1D (13)C NMR, selective 1D TOCSY, 2D COSY, 2D HSQC, 2D HMBC and ROESY NMR spectroscopy. Phase solubility studies indicated that both of them ß-cyclodextrin and succinyl-ß-cyclodextrin formed 1:1 inclusion complexes with albendazole, and the stability constants were 68M(-1) (ß-cyclodextrin), 437M(-1) (succinyl-ß-cyclodextrin), respectively. Water solubility and dissolution rate of albendazole were significantly improved in complex forms. Thus, the succinyl-ß-cyclodextrin derivative could be a promising excipient to design oral dosage forms.

First solid-state NMR spectroscopy evaluation of complexes of benznidazole with cyclodextrin derivatives.

Complexation of benznidazole (BZL), a drug of choice for the treatment of Chagas'neglected disease, with cyclodextrin (CD) derivatives was analyzed by solid-state NMR. (13)C cross polarization/magic angle spinning spectra were recorded from BZL and from BZL:ß-CD, BZL:methyl ß-CD and BZL:hydroxypropyl ß-CD complexes, which were obtained by the solvent evaporation technique. No significant evidence was obtained on BZL inclusion complexes involving either ß-CD or hydroxypropyl ß-CD. Conversely, BZL:methyl ß-CD displayed BZL resonances characteristic of an amorphous drug and data analysis confirmed the presence of stable BZL:methyl ß-CD inclusion complexes, with benzene encapsulated into the host cavity. Further evidences on complex structure and dynamics were obtained from proton and carbon spin-lattice relaxation times in the rotating frame. These data are consistent with a common guest-host spin reservoir. The BZL interaction with methyl ß-CD provided a route to stabilize amorphous BZL. Physical mixtures with identical BZL and CD compositions were also studied for comparison.

Efficacy of albendazole:ß-cyclodextrin citrate in the parenteral stage of Trichinella spiralis infection.

Albendazole-ß-cyclodextrin citrate (ABZ:C-ß-CD) inclusion complex in vivo antiparasitic activity was evaluated in the parenteral phase of Trichinella spiralis infection in mice. An equimolar complex of ABZ:C-ß-CD was prepared by spray-drying and tested in CBi-IGE male mice orally infected with L1 infective larvae. Infected animals were treated with 50 or 30mg/kg albendazole, (ABZ) equivalent amounts of the ABZ:C-ß-CD complex and non treated (controls). Mice received a daily dose on days 28, 29 and 30 post-infection. A week later, larval burden and percentage of encysted dead larvae were assessed in the host by counting viable and non-viable larvae in the tongue. Complexation of ABZ with C-ß-CD increased the drug dissolution efficiency nearly eightfold. At 37 days p-i, the reduction percentage in muscle larval load was 35% in mice treated with 50mg/kg/day ABZ and 68% in those given the complex. Treatment with the lower dose showed a similar decrease in parasite burden. Treated animals showed a high percentage of nonviable larvae, the proportion being significantly higher in mice receiving the complex than in control animals (72-88% vs. 11%, P=0.0032). These data indicate that ABZ:C-ß-CD increases bioavailability and effectiveness of ABZ against encapsulated Trichinella larvae, thus allowing the use of small doses.

Spray drying formulation of albendazole microspheres by experimental design. In vitro-in vivo studies.

Both an experimental design and optimization techniques were carried out for the development of chitosan-pectin-carboxymethylcellulose microspheres to improve the oral absorption of albendazole as a model drug. The effect of three different factors (chitosan, pectin and carboxy methyl cellulose concentrations) was studied on five responses: yield, morphology, dissolution rate at 30 and 60 min, and encapsulation efficiency of the microspheres. During the screening phase, the factors were evaluated in order to identify those which exert a significant effect. Simultaneous multiple response optimizations were then used to find out experimental conditions where the system shows the most adequate results. The optimal conditions were found to be: chitosan concentration, 1.00% w/v, pectin concentration 0.10% w/v and carboxymethylcellulose concentration 0.20% w/v. The bioavailability of the loaded drug in the optimized microspheres was evaluated in Wistar rats which showed an area under curve (AUC) almost 10 times higher than the pure drug.

Characterization of albendazole-randomly methylated-ß-cyclodextrin inclusion complex and in vivo evaluation of its antihelmitic activity in a murine model of Trichinellosis.

Albendazole is a benzimidazole carbamate extensively used in oral chemotherapy against intestinal parasites, due to its broad spectrum activity, good tolerance and low cost. However, the drug has the disadvantage of poor bioavailability due to its very low solubility in water; as a consequence, a very active area of research focuses on the development of new pharmaceutical formulations to increase its solubility, dissolution rate, and bioavailability. The primary objective of this study was to prepare randomly methylated ß-cyclodextrins inclusion complexes to increase albendazole dissolution rate, in order to enhance its antiparasitic activity. This formulation therapeutic efficacy was contrasted with that of the pure drug by treating Trichinella spiralis infected mice during the intestinal phase of the parasite cycle, on days five and six post-infection. This protocol significantly decreased muscle larval burden measured in the parenteral stage on day 30 post-infection, when compared with the untreated control. Thus, it could be demonstrated that the inclusion complexes improve the in vivo therapeutic activity of albendazole.

Chitosan microparticles: influence of the gelation process on the release profile and oral bioavailability of albendazole, a class II compound.

Encapsulation of albendazole, a class II compound, into polymeric microparticles based on chitosan-sodium lauryl sulfate was investigated as a strategy to improve drug dissolution and oral bioavailability. The microparticles were prepared by spray drying technique and further characterized by means of X-ray powder diffractometry, infrared spectroscopy and scanning electron microscopy. The formation of a novel polymeric structure between chitosan and sodium lauryl sulfate, after the internal or external gelation process, was observed by infrared spectroscopy. The efficiency of encapsulation was found to be between 60 and 85% depending on the internal or external gelation process. Almost spherically spray dried microparticles were observed using scanning electron microscopy. In vitro dissolution results indicated that the microparticles prepared by internal gelation released 8% of the drug within 30 min, while the microparticles prepared by external gelation released 67% within 30 min. It was observed that the AUC and Cmax values of ABZ from microparticles were greatly improved, in comparison with the non-encapsulated drug. In conclusion, the release properties and oral bioavailability of albendazole were greatly improved by using spraydried chitosan-sodium lauryl sulphate microparticles.

Novel albendazole formulations given during the intestinal phase of Trichinella spiralis infection reduce effectively parasitic muscle burden in mice.

Trichinellosis is a zoonotic disease affecting people all over the world, for which there is no speedy and reliable treatment. Albendazole (ABZ), an inexpensive benzimidazole used in oral chemotherapy against helminthic diseases, has a broad spectrum activity and is well tolerated. However, the low absorption and variable bioavailability of the drug due to its low aqueous solubility are serious disadvantages for a successful therapy. In this study, we evaluated the in vivo antiparasitic activity of three novel solid microencapsulated formulations, designed to improve ABZ dissolution rate, in a murine model of trichinellosis. Both ABZ and the microparticulate formulations were administered during the intestinal phase of the parasite cycle, on days 5 and 6 post-infection. This protocol significantly decreased muscle larval burden measured in the parenteral phase, on day 30 post-infection, when compared with the untreated control. Moreover, two of the three microencapsulated formulations both strongly and consistently reduced worm burden.

Efficacy of novel benznidazole solutions during the experimental infection with Trypanosoma cruzi.

Chagas' disease is caused by the protozoan parasite Trypanosoma cruzi. About 8 million people throughout Latin America are infected causing approximately 10,000 deaths annually. Benznidazole, available as unique 100 mg tablets in many of the endemic countries, is currently the drug of choice for the specific treatment of this condition. Despite of the large number of pediatric patients infected, there are no commercial liquid dosage forms available to treat this trypanosomiasis. This work showed that novel benznidazole-water-polyethylene glycol 400 solutions are active against T. cruzi in a murine model of Chagas' disease. Present results constitute the first demonstration on the usefulness of benznidazole solutions in infected mice.