A Review on Ionic Liquid Gas Separation Membranes.

Ionic liquids have attracted the attention of the industry and research community as versatile solvents with unique properties, such as ionic conductivity, low volatility, high solubility of gases and vapors, thermal stability, and the possibility to combine anions and cations to yield an almost endless list of different structures. These features open perspectives for numerous applications, such as the reaction medium for chemical synthesis, electrolytes for batteries, solvent for gas sorption processes, and also membranes for gas separation. In the search for better-performing membrane materials and membranes for gas and vapor separation, ionic liquids have been investigated extensively in the last decade and a half. This review gives a complete overview of the main developments in the field of ionic liquid membranes since their first introduction. It covers all different materials, membrane types, their preparation, pure and mixed gas transport properties, and examples of potential gas separation applications. Special systems will also be discussed, including facilitated transport membranes and mixed matrix membranes. The main strengths and weaknesses of the different membrane types will be discussed, subdividing them into supported ionic liquid membranes (SILMs), poly(ionic liquids) or polymerized ionic liquids (PILs), polymer/ionic liquid blends (physically or chemically cross-linked 'ion-gels'), and PIL/IL blends. Since membrane processes are advancing as an energy-efficient alternative to traditional separation processes, having shown promising results for complex new separation challenges like carbon capture as well, they may be the key to developing a more sustainable future society. In this light, this review presents the state-of-the-art of ionic liquid membranes, to analyze their potential in the gas separation processes of the future.

Poly[3-ethyl-1-vinyl-imidazolium] diethyl phosphate/Pebax® 1657 Composite Membranes and Their Gas Separation Performance.

Poly(ionic liquid)s are an innovative class of materials with promising properties in gas separation processes that can be used to boost the neat polymer performances. Nevertheless, some of their properties such as stability and mechanical strength have to be improved to render them suitable as materials for industrial applications. This work explored, on the one hand, the possibility to improve gas transport and separation properties of the block copolymer Pebax® 1657 by blending it with poly[3-ethyl-1-vinyl-imidazolium] diethyl phosphate (PEVI-DEP). On the other hand, Pebax® 1657 served as a support for the PIL and provided mechanical resistance to the samples. Pebax® 1657/PEVI-DEP composite membranes containing 20, 40, and 60 wt.% of PEVI-DEP were cast from solutions of the right proportion of the two polymers in a water/ethanol mixture. The PEVI-DEP content affected both the morphology of the dense membranes and gas transport through the membranes. These changes were revealed by scanning electron microscopy (SEM), time-lag, and gravimetric sorption measurements. Pebax® 1657 and PEVI-DEP showed similar affinity towards CO2, and its uptake or solubility was not influenced by the amount of PIL in the membrane. Therefore, the addition of the PIL did not lead to improvements in the separation of CO2 from other gases. Importantly, PEVI-DEP (40 wt.%) incorporation affected and improved permeability and selectivity by more than 50% especially for the separation of light gases, e.g., H2/CH4 and H2/CO2, but higher PEVI-DEP concentrations lead to a decline in the transport properties.

A Novel Time Lag Method for the Analysis of Mixed Gas Diffusion in Polymeric Membranes by On-Line Mass Spectrometry: Pressure Dependence of Transport Parameters.

This paper presents a novel method for transient and steady state mixed gas permeation measurements, using a quadrupole residual gas analyser for the on-line determination of the permeate composition. The on-line analysis provides sufficiently quick response times to follow even fast transient phenomena, enabling the unique determination of the diffusion coefficient of the individual gases in a gas mixture. Following earlier work, the method is further optimised for higher gas pressures, using a thin film composite and a thick dense styrene-butadiene-styrene (SBS) block copolymer membrane. Finally, the method is used to calculate the CO2/CH4 mixed gas diffusion coefficients of the spirobisfluorene-based polymer of intrinsic microporosity, PIM-SBF-1. It is shown that the modest pressure dependence of the PIM-SBF-1 permeability can be ascribed to a much stronger pressure dependence of the diffusion coefficient, which partially compensates the decreasing solubility of CO2 with increasing pressure, typical for the strong sorption behaviour in PIMs. The characteristics of the instrument are discussed and suggestions are given for even more versatile measurements under stepwise increasing pressure conditions. This is the first report on mixed gas diffusion coefficients at different pressures in a polymer of intrinsic microporosity.

Thin, High-Flux, Self-Standing, Graphene Oxide Membranes for Efficient Hydrogen Separation from Gas Mixtures.

The preparation and gas-separation performance of self-standing, high-flux, graphene oxide (GO) membranes is reported. Defect-free, 15-20 µm thick, mechanically stable, unsupported GO membranes exhibited outstanding gas-separation performance towards H2 /CO2 that far exceeded the corresponding 2008 Robeson upper bound. Remarkable separation efficiency of GO membranes for H2 and bulky C3 or C4 hydrocarbons was achieved with high flux and good selectivity at the same time. On the contrary, N2 and CH4 molecules, with larger kinetic diameter and simultaneously lower molecular weight, relative to that of CO2 , remained far from the corresponding H2 /N2 or H2 /CH4 upper bounds. Pore size distribution analysis revealed that the most abundant pores in GO material were those with an effective pore diameter of 4 nm; therefore, gas transport is not exclusively governed by size sieving and/or Knudsen diffusion, but in the case of CO2 was supplemented by specific interactions through 1) hydrogen bonding with carboxyl or hydroxyl functional groups and 2) the quadrupole moment. The self-standing GO membranes presented herein demonstrate a promising route towards the large-scale fabrication of high-flux, hydrogen-selective gas membranes intended for the separation of H2 /CO2 or H2 /alkanes.

Triptycene induced enhancement of membrane gas selectivity for microporous Tröger's base polymers.

A highly gas permeable polymer with exceptional size selectivity is prepared by fusing triptycene units together via a poly-merization reaction involving Tröger's base formation. The extreme rigidity of this polymer of intrinsic microporosity (PIM-Trip-TB) facilitates gas permeability data that lie well above the benchmark 2008 Robeson upper bounds for the important O2 /N2 and H2 /N2 gas pairs.