Three-Dimensional-Printed Instrument for Isothermal Nucleic Acid Amplification with Real-Time Colorimetric Imaging.

Isothermal amplification methods have become popular in research due to the simplicity of the technology needed to run the reactions. Specifically, loop-mediated isothermal amplification (LAMP) has been widely used for various applications since first reported in 2000. LAMP reactions are commonly monitored with the use of colorimetry. Although color changes associated with positive amplification are apparent to the naked eye, this detection method is subjective due to inherent differences in visual perception from person to person. The objectivity of the colorimetric detection method may be improved by programmed image capture over time with simultaneous heating. As such, the development of a novel, one-step, automated, and integrated analysis system capable of performing these tasks in parallel is detailed herein. The device is adaptable to multiple colorimetric dyes, cost-effective, 3D-printed for single-temperature convective heating, and features an easy-to-use LabVIEW software program developed for automated image analysis. The device was optimized and subsequently validated using four messenger-RNA targets and mock forensic samples. The performance of our device was determined to be comparable to that of a conventional thermal cycler and smartphone image analysis, respectively. Moreover, the outlined system is capable of objective colorimetric analysis, with exceptional throughput of up to 96 samples at once.

Integrated membranes within centrifugal microfluidic devices: a review.

Centrifugal microfluidics has evolved into a sophisticated technology capable of enabling the exploration of fundamental questions in such fields as protein analysis, environmental monitoring, and live cell handling. These microdevices also hold unique potential for translating promising academic research into many real-world scenarios, with several products already available on the market. Yet, in order to fully realize this potentially transformative technology, there remains an outstanding need to incorporate simple to operate world-to-chip interfaces alongside the integration and automation of complex workflows. This requires cost-effective and versatile materials that are, ideally, already commercially available. Membranes not only meet these exigencies, they are also capable of enhancing the inherent advantages of microdevices when thoughtfully combined. This review provides an overview of the importance of these two technologies and the manifold benefits upon their unification. The fundamental principles governing fluid flow with centrifugal actuation, as well as within porous membranes, are briefly covered in addition to a comment on their relative advantages compared to classical microdevices and porous media. The major subtypes in membrane composition, preparation, and microfluidic integration strategies are next discussed in detail, along with their relativistic capabilities and drawbacks. This is followed by recent examples in the literature displaying the enormous versatility membranes have already demonstrated within microfluidic devices, highlighting recent centrifugal microdevices wherever possible. Finally, recommendations for areas where the incorporation of these materials still face challenges, as well as possible new avenues for exploration, are also provided.

Towards an affinity-free, centrifugal microfluidic system for rapid, automated forensic differential extraction.

Biological evidence originating from victims of sexual assault is often comprised of unbalanced cellular mixtures with significantly higher contributions from the victim's genetic material. Enrichment of the forensically-critical sperm fraction (SF) with single-source male DNA relies on differential extraction (DE), a manually-intensive process that is prone to contamination. Due to DNA losses from sequential washing steps, some existing DE methods often fail to generate sufficient sperm cell DNA recovery for perpetrator(s) identification. Here, we propose an enzymatic, 'swab-in' rotationally-driven microfluidic device to achieve complete, self-contained, on-disc automation of the forensic DE workflow. This 'swab-in' approach retains the sample within the microdevice, enabling lysis of sperm cells directly from the evidence cutting to improve sperm cell DNA yield. We demonstrate clear proof-of-concept of a centrifugal platform that provides for timed reagent release, temperature control for sequential enzymatic reactions, and enclosed fluidic fractionation that allows for objective evaluation of the DE process chain with a total processing time of ≤15 min. On-disc extraction of buccal or sperm swabs establishes compatibility of the prototype disc with: 1) an entirely enzymatic extraction method, and 2) distinct downstream analysis modalities, such as the PicoGreen® DNA assay for nucleic acid detection and the polymerase chain reaction (PCR).

Digital image analysis for biothreat detection via rapid centrifugal microfluidic orthogonal flow immunocapture.

We report clear proof-of-principle for centrifugally-driven, multiplexed, paper-based orthogonal flow sandwich-style immunocapture (cOFI) and colorimetric detection of Zaire Ebola virus-like particles. Capture antibodies are immobilized onto nanoporous nitrocellulose membranes that are then laminated into polymeric microfluidic discs to yield ready-to-use analytical devices. Fluid flow is controlled solely by rotational speed, obviating the need for complex pneumatic pumping systems, and providing more precise flow control than with the capillary-driven flow used in traditional lateral flow immunoassays (LFIs). Samples containing the antigen of interest and gold nanoparticle-labeled detection antibodies are pumped centrifugally through the embedded, prefunctionalized membrane where they are subsequently captured to generate a positive, colorimetric signal. When compared to the equivalent LFI counterparts, this cOFI approach generated immunochromatographic colorimetric responses that are objectively darker (saturation), more intense (grayscale), and less variable regarding total area of the color response. We also describe an image analysis approach that enables access to rich color data and area statistics without the need for a commercial 'strip reader' or custom-written image analysis algorithms. Instead, our analytical method exploits inexpensive equipment (e.g., smart phone, flatbed scanner, etc.) and freely available software (Fiji distribution of ImageJ) to permit characterization of immunochromatographic responses that includes multiple color metrics, offering insights beyond typical grayscale analysis. The findings reported here stand as clear proof-of-principle for the feasibility of disc-based, centrifugally driven orthogonal flow through a membrane with immunocapture (cOFI) and colorimetric readout of a sandwich-type immunoassay in less than 15 minutes. Once fully developed, this cOFI platform could render a faster, more accurate diagnosis, while processing multiple samples simul-taneously.

Taking the microfluidic approach to nucleic acid analysis in forensics: Review and perspectives.

Forensic laboratories are universally acknowledged as being overburdened, underfunded, and in need of improved analytical methods to expedite investigations, decrease the costs associated with nucleic acid (NA) analysis, and perform human identification (HID) at the point of need (e.g., crime scene, booking station, etc.). In response, numerous research and development (R&D) efforts have resulted in microfluidic tools that automate portions of the forensic genetic workflow, including DNA extraction, amplification, and short tandem repeat (STR) typing. By the early 2000 s, reports from the National Institute of Justice (NIJ) anticipated that microfluidic 'swab-in-profile-out' systems would be available for use at the crime scene by 2015 and the FBI's 2010 'Rapid DNA' Initiative, approved by Congress in 2017, directed this effort by guiding the development and implementation of maturing systems. At present, few fully-automated microfluidic DNA technologies are commercially available for forensic HID and their adoption by agencies interested in identification has been limited. In practice, the integration of complex laboratory processes to produce one autonomous unit, along with the highly variable nature of forensic input samples, resulted in systems that are more expensive per sample and not comparable to gold-standard identification methods in terms of sensitivity, reproducibility, and multiplex capability. This Review and Perspective provides insight into the contributing factors to this outcome; namely, we focus on the complications associated with the tremendous undertaking that is developing a sample-in-answer-out platform for HID. For context, we also describe the intricate forensic landscape that contributes to a nuanced marketplace, not easily distilled down to cases of simple supply and demand. Moving forward and considering the trade-offs associated with developing methods to compete, sometimes directly, with conventional ones, we recommend a focus shift for microfluidics developers toward the creation of innovative solutions for emerging applications in the field to increase the bandwidth of the forensic investigative toolkit. Likewise, we urge case working personnel to reframe how they conceptualize the currently available Rapid DNA tools; rather than comparing these microfluidic methods to gold-standard procedures, take advantage of their rapid and integrated modes for those situations requiring expedited identifications in an informed manner.

Rapid Microchip Electrophoretic Separation of Novel Transcriptomic Body Fluid Markers for Forensic Fluid Profiling.

Initial screening of criminal evidence often involves serological testing of stains of unknown composition and/or origin discovered at a crime scene to determine the tissue of origin. This testing is presumptive but critical for contextualizing the scene. Here, we describe a microfluidic approach for body fluid profiling via fluorescent electrophoretic separation of a published mRNA panel that provides unparalleled specificity and sensitivity. This centrifugal microfluidic approach expedites and automates the electrophoresis process by allowing for simple, rotationally driven flow and polymer loading through a 5 cm separation channel; with each disc containing three identical domains, multi-sample analysis is possible with a single disc and multi-sample detection per disc. The centrifugal platform enables a series of sequential unit operations (metering, mixing, aliquoting, heating, storage) to execute automated electrophoretic separation. Results show on-disc fluorescent detection and sizing of amplicons to perform comparably with a commercial 'gold standard' benchtop instrument and permitted sensitive, empirical discrimination between five distinct body fluids in less than 10 min. Notably, our microfluidic platform represents a faster, simpler method for separation of a transcriptomic panel to be used for forensically relevant body fluid identification.

Ultra-rapid real-time microfluidic RT-PCR instrument for nucleic acid analysis.

The polymerase chain reaction (PCR) is paramount in nucleic acid amplification testing, and for many assays, the use of PCR or qPCR is considered the 'gold standard'. While instrumentation for executing PCR has advanced over the last two decades, a growing interest in point-of-need testing has highlighted the deficit that exists for 'rapid PCR' systems. Here, we describe a field-forward prototype instrument capable of ultra-fast thermal cycling for real-time PCR amplification of DNA and RNA. The custom-designed, injection-molded microfluidic chips interface with a novel mechatronic system to complete 40 cycles of real-time PCR in under 10 minutes, an 84% reduction in time compared to a standard 50 minute assay. Such rapid amplification is enabled by two thermoelectric Peltiers capable of efficiently heating and cooling the sample at 12 and 10 °C s-1, respectively. Judicious selection and strategic placement of the thermal cyclers and fluorescence detector relative to the microchip enable synchronized thermal cycling and fluorescence monitoring, further reducing time-to-result. Robust amplification and detection of DNA and RNA targets empowers laboratories to achieve rapid, actionable information in endless applications.

A novel method for inward fluid displacement in centrifugal microdevices for highly integrated nucleic acid processing with long-term reagent storage.

Rotationally-driven lab-on-a-disc (LoaD) microfluidic systems are among the most promising methods for realizing complex nucleic acid (NA) testing at the point-of-need (PoN). However, despite significant advancements in NA amplification methods, very few sample-to-answer centrifugal microfluidic platforms have been realized due, in part, to a lack of on-disc sample preparation. In many instances, NA extraction (NAE) and/or lysis must be performed off-disc using conventional laboratory equipment and methods, thus tethering the assay to centralized facilities. Omission of in-line cellular lysis and NAE can be partially attributed to the nature of centrifugally-driven fluidics. Since flow is directed radially outward relative to the center of rotation (CoR), the number of possible sequential unit operations is limited by the disc radius. To address this, we report a simple, practical, automatable, and easy-to-implement method for inward fluid displacement (IFD) compatible with downstream nucleic acid amplification tests (NAATs). This approach leverages carbon dioxide (CO2) gas generated from on-board acid-base neutralization to drive liquid from the disc periphery towards the CoR. Large architectural features or highly corrosive chemicals required in other approaches were replaced with safe-to-handle IFD reagents that maintained their reactivity for at least six months of storage on-disc. Further, spatiotemporal control over neutralization initiation and containment of the resultant pneumatic pressure head was reliably achieved using a single diode for both laser-actuated valve opening and channel sealing, which eliminated the need for manual intervention (e.g., taping over vents) required in other IFD methods. Following initial characterization via dye recovery studies, we demonstrated for the first time that CO2-driven displacement does not inhibit downstream NAATs; NAs isolated direct-from-swab on disc were compatible with both 'gold standard' polymerase chain reaction (PCR) techniques and loop-mediated isothermal amplification (LAMP). The IFD approach described here stands to significantly ease integration of an increased number of sequential on-board processes, including cellular lysis, nucleic acid extraction, amplification, and detection, to greatly lower barriers towards automatable sample-to-answer LoaDs amenable for use on-site operation by non-technical personnel.

Rapid SARS-CoV-2 Virus Enrichment and RNA Extraction for Efficient Diagnostic Screening of Pooled Nasopharyngeal or Saliva Samples for Dilutions Up to 1:100.

As COVID-19 transmission control measures are gradually being lifted, a sensitive and rapid diagnostic method for large-scale screening could prove essential for monitoring population infection rates. However, many rapid workflows for SARS-CoV-2 detection and diagnosis are not amenable to the analysis of large-volume samples. Previously, our group demonstrated a technique for SARS-CoV-2 nanoparticle-facilitated enrichment and enzymatic lysis from clinical samples in under 10 min. Here, this sample preparation strategy was applied to pooled samples originating from nasopharyngeal (NP) swabs eluted in viral transport medium (VTM) and saliva samples diluted up to 1:100. This preparation method was coupled with conventional RT-PCR on gold-standard instrumentation for proof-of-concept. Additionally, real-time PCR analysis was conducted using an in-house, ultra-rapid real-time microfluidic instrument paired with an experimentally optimized rapid protocol. Following pooling and extraction from clinical samples, average cycle threshold (CT) values from resultant eluates generally increased as the pooling dilution factor increased; further, results from a double-blind study demonstrated 100% concordance with clinical values. In addition, preliminary data obtained from amplification of eluates prepared by this technique and analyzed using our portable, ultra-rapid real-time microfluidic PCR amplification instrument showed progress toward a streamlined method for rapid SARS-CoV-2 analysis from pooled samples.

Rapid, inexpensive fabrication of electrophoretic microdevices for fluorescence detection.

The laser print, cut, and laminate (PCL) method for microfluidic device fabrication can be leveraged for rapid and inexpensive prototyping of electrophoretic microchips useful for optimizing separation conditions. The rapid prototyping capability allows the evaluation of fluidic architecture, applied fields, reagent concentrations, and sieving matrix, all within the context of using fluorescence-compatible substrates. Cyclic olefin copolymer and toner-coated polyethylene terephthalate (tPeT) were utilized with the PCL technique and bonding methods optimized to improve device durability during electrophoresis. A series of separation channel designs and centrifugation conditions that provided successful loading of sieving polymer in less than 3 min was described. Separation of a 400-base DNA sizing ladder provided calculated base resolution between 3 and 4 bases, a greater than 18-fold improvement over separations on similar substrates. Finally, the accuracy and precision capabilities of these devices were demonstrated by separating and sizing DNA fragments of 147 and 167 bases as 148.62 ± 2 and 166.48 ± 3 bases, respectively.

Dielectric heating of highly corrosive and oxidizing reagents on a hybrid glass microfiber-polymer centrifugal microfluidic device.

Many assays necessitate the use of highly concentrated acids, powerful oxidizing agents, or a combination of the two. Although microfluidic devices offer vast potential for rapid analytical interrogation at the point-of-need (PON), they cannot escape the fundamental requirement for reagent compatibility. Worse, many innovative protocols have been developed that would represent a significant improvement to current field-forward practices within their respective disciplines, but adoption falters due to chemical incompatibility with challenging reagents. Polymeric centrifugal microfluidic devices meet many of the needs for accommodating complex chemical or biochemical protocols in a multiplexed and automatable format. Yet, they also struggle to accommodate highly reactive chemical components long term. In this work, we report on a simple and inexpensive reagent storage strategy that bypasses the typical complexity involved with integration of liquid reagents on microfluidic devices. Moreover, we demonstrate microdevice compatibility and operation after six months of corrosive reagent storage as well as post dielectric heating. This new strategy allows for storage of multiple highly corrosive and oxidative reagents simultaneously, enhancing the possibilities for multistep assay integration at the PON for a diverse array of applications. Successful detection after one week of corrosive reagent storage of an illicit drug and neurotransmitter metabolite, for forensic and clinical applications, is demonstrated. Furthermore, environmental sample preparation via microwave-assisted wet acid digestion is performed on-disc and integrated with downstream detection. Quantitative detection of a heavy metal in soil is achieved by way of on-disc calibration and found to be accurate within 2.4% compared to a gold standard reference (ICP-OES).

Characterization of a Centrifugal Microfluidic Orthogonal Flow Platform.

To bring to bear the power of centrifugal microfluidics on vertical flow immunoassays, control of flow orthogonally through nanoporous membranes is essential. The on-disc approach described here leverages the rapid print-cut-laminate (PCL) disc fabrication and prototyping method to create a permanent seal between disc materials and embedded nanoporous membranes. Rotational forces drive fluid flow, replacing capillary action, and complex pneumatic pumping systems. Adjacent microfluidic features form a flow path that directs fluid orthogonally (vertically) through these embedded membranes during assay execution. This method for membrane incorporation circumvents the need for solvents (e.g., acetone) to create the membrane-disc bond and sidesteps issues related to undesirable bypass flow. In other recently published work, we described an orthogonal flow (OF) platform that exploited embedded membranes for automation of enzyme-linked immunosorbent assays (ELISAs). Here, we more fully characterize flow patterns and cellulosic membrane behavior within the centrifugal orthogonal flow (cOF) format. Specifically, high-speed videography studies demonstrate that sample volume, membrane pore size, and ionic composition of the sample matrix significantly impact membrane behavior, and consequently fluid drainage profiles, especially when cellulosic membranes are used. Finally, prototype discs are used to demonstrate proof-of-principle for sandwich-type antigen capture and immunodetection within the cOF system.

Centrifugal Microfluidic Method for Enrichment and Enzymatic Extraction of Severe Acute Respiratory Syndrome Coronavirus 2 RNA.

The diversification of analytical tools for diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is imperative for effective virus surveillance and transmission control worldwide. Development of robust methods for rapid, simple isolation of viral RNA permits more expedient pathogen detection by downstream real-time reverse transcriptase polymerase chain reaction (real-time RT-PCR) to minimize stalled containment and enhance treatment efforts. Here, we describe an automatable rotationally driven microfluidic platform for enrichment and enzymatic extraction of SARS-CoV-2 RNA from multiple sample types. The multiplexed, enclosed microfluidic centrifugal device (µCD) is capable of preparing amplification-ready RNA from up to six samples in under 15 min, minimizing user intervention and limiting analyst exposure to pathogens. Sample enrichment leverages Nanotrap Magnetic Virus Particles to isolate intact SARS-CoV-2 virions from nasopharyngeal and/or saliva samples, enabling the removal of complex matrices that inhibit downstream RNA amplification and detection. Subsequently, viral capsids are lysed using an enzymatic lysis cocktail for release of pathogenic nucleic acids into a PCR-compatible buffer, obviating the need for downstream purification. Early in-tube assay characterization demonstrated comparable performance between our technique and a "gold-standard" commercial RNA extraction and purification kit. RNA obtained using the fully integrated µCDs permitted reliable SARS-CoV-2 detection by real-time RT-PCR. Notably, we successfully analyzed full-process controls, positive clinical nasopharyngeal swabs suspended in viral transport media, and spiked saliva samples, showcasing the method's broad applicability with multiple sample matrices commonly encountered in clinical diagnostics.

A Membrane-Modulated Centrifugal Microdevice for Enzyme-Linked Immunosorbent Assay-Based Detection of Illicit and Misused Drugs.

Increased opioid use and misuse have imposed large analytical demands across clinical and forensic sectors. Due to the absence of affordable, accurate, and simple on-site tests (e.g., point of interdiction and bedside), analysis is primarily conducted in centralized laboratories via time-consuming, labor-intensive methods. Many healthcare facilities do not have such analytical capabilities and must send samples to commercial laboratories, increasing turnaround time and care costs, as well as delaying public health warnings regarding the emergence of specific substances. Enzyme-linked immunosorbent assays (ELISAs) are used ubiquitously, despite lengthy workflows that require substantial manual intervention. Faster, reliable analytics are desperately needed to mitigate the mortality and morbidity associated with the current substance use epidemic. We describe one such alternative─a portable centrifugal microfluidic ELISA system that supplants repetitive pipetting with rotationally controlled fluidics. Embedded cellulosic membranes act as microvalves, permitting flow only when centrifugally generated hydraulic pressure exceeds their liquid entry pressure. These features enable stepwise reagent introduction, incubation, and removal simply by tuning rotational frequency. We demonstrate the success of this platform through sensitive, specific colorimetric detection of opiates, a subclass of opioids naturally derived from the opium poppy. Objective image analysis eliminated subjectivity in human color perception and permitted reliable detection of opiates in buffer and artificial urine at the ng/µL range. Opiates were clearly differentiated from other drug classes without interference from common adulterants known to cause false positive results in current colorimetric field tests. Eight samples were simultaneously analyzed in under 1 h, a marked reduction from the traditional multiday timeline. This approach could permit rapid, automatable ELISA-based drug detection outside of traditional laboratories by nontechnical personnel.

An ultrafast SARS-CoV-2 virus enrichment and extraction method compatible with multiple modalities for RNA detection.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a zoonotic RNA virus characterized by high transmission rates and pathogenicity worldwide. Continued control of the COVID-19 pandemic requires the diversification of rapid, easy to use, sensitive, and portable methods for SARS-CoV-2 sample preparation and analysis. Here, we propose a method for SARS-CoV-2 viral enrichment and enzymatic extraction of RNA from clinically relevant matrices in under 10 min. This technique utilizes affinity-capture hydrogel particles to concentrate SARS-CoV-2 from solution, and leverages existing PDQeX technology for RNA isolation. Characterization of our method is accomplished with reverse transcription real-time polymerase chain reaction (RT-PCR) for relative, comparative RNA detection. In a double-blind study analyzing viral transport media (VTM) obtained from clinical nasopharyngeal swabs, our sample preparation method demonstrated both comparable results to a routinely used commercial extraction kit and 100% concordance with laboratory diagnoses. Compatibility of eluates with alternative forms of analysis was confirmed using microfluidic RT-PCR (µRT-PCR), recombinase polymerase amplification (RPA), and loop-mediated isothermal amplification (LAMP). The alternative methods explored here conveyed successful amplification from all RNA eluates originating from positive clinical samples. Finally, this method demonstrated high performance within a saliva matrix across a broad range of viral titers and dilutions up to 90% saliva matrix, and sets the stage for miniaturization to the microscale.

Real-Time Detection and Control of Microchannel Resonance Frequency in Acoustic Trapping Systems by Monitoring Amplifier Supply Currents.

The utilization of bulk acoustic waves from a piezoelectric transducer for selective particle trapping under flow in a microchannel is limited by the high sensitivity of the resonance frequency to tolerances in device geometry, drift during trapping, and variations in the local flow or sample conditions in each channel. This is addressed by detecting the resonance condition based on the impedance minimum obtained by monitoring the amplitude of the stimulation voltage across the piezo transducer and utilizing real-time feedback to control the stimulation frequency. However, this requires an overlap in the frequency bandwidth of the detection and the stimulation system and is also limited by the decline in the acoustic trapping power when the stimulation and resonance frequency measurement are conducted simultaneously. Instead, we present a novel circuit implementation for on-chip real-time resonance frequency measurement and feedback control based on monitoring the current drawn from the amplifier used to stimulate the piezo transducer, since the need for high measurement sensitivity in this mode does not lower the power available for stimulation of the transducer. The enhanced level of control of acoustic trapping utilizing this current mode is validated for various localized channel perturbations, including drift, wash steps, and buffer swaps, as well as for selective sperm cell trapping from a heterogeneous sample that includes lysed epithelial cells.

Multiplexed Centrifugal Microfluidic System for Dynamic Solid-Phase Purification of Polynucleic Acids Direct from Buccal Swabs.

This report describes the development of a centrifugally controlled microfluidic dynamic solid-phase extraction (dSPE) platform to reliably obtain amplification-ready nucleic acids (NAs) directly from buccal swab cuttings. To our knowledge, this work represents the first centrifugal microdevice for comprehensive preparation of high-purity NAs from raw buccal swab samples. Direct-from-swab cellular lysis was integrated upstream of NA extraction, and automatable laser-controlled on-board microvalving strategies provided the strict spatiotemporal fluidic control required for practical point-of-need use. Solid-phase manipulation during extraction leveraged the application of a bidirectional rotating magnetic field to promote thorough interaction with the sample (e.g., NA capture). We illustrate the broad utility of this technology by establishing downstream compatibility of extracted nucleic acids with three noteworthy assays, namely, the polymerase chain reaction (PCR), reverse transcriptase PCR (RT-qPCR), and loop-mediated isothermal amplification (LAMP). The PCR-readiness of the extracted DNA was confirmed by generating short tandem repeat (STR) profiles following multiplexed amplification. With no changes to assay workflow, viral RNA was successfully extracted from contrived (spiked) SARS-CoV-2 swab samples, confirmed by RT-qPCR. Finally, we demonstrate the compatibility of the extracted DNA with LAMP-a technique well suited for point-of-need genetic analysis due to minimal hardware requirements and compatibility with colorimetric readout. We describe an automatable, portable microfluidic platform for the nucleic acid preparation device that could permit practical, in situ use by nontechnical personnel.

Microfluidic Device for the Identification of Biological Sex by Analysis of Latent Fingermark Deposits.

To date, most research regarding amino acid detection and quantification in fingermarks relies on spectrometric methods. Herein, the Sakaguchi colorimetric test was adapted to a rotationally-driven microfluidic platform and used to detect and quantify arginine in fingermarks deposited by male and female donors. A red color indicates the presence of arginine in a given sample following the reaction, and the intensity of this color is linearly proportional to the concentration. Objective detection and quantification of arginine were accomplished using image analysis software (freeware) based on this colorimetric result. The mean concentrations obtained in a blind study were 96.4 ± 5.1 µM for samples from female donors and 55.3 ± 5.3 µM for samples from males. These were not statistically different from the literature values of 94.8 µM ± 12.9 µM for females (p = 0.908) and 54.0 ± 12.6 µM for males (p = 0.914), respectively (± SEM in all cases). Conversely, the experimental means from males and female samples were statistically different from each other (p < 0.001). Objective differentiation between male and female fingermark deposits was achieved in a blind study with 93% accuracy. Additionally, the method was compatible both with samples lifted from common surfaces and with magnetically-powdered samples.

Optimization of novel loop-mediated isothermal amplification with colorimetric image analysis for forensic body fluid identification.

Accurate presumptive and confirmatory test use for forensic body fluid identification is essential for gaining contextual information for crime scene investigators. Loop-mediated isothermal amplification (LAMP) is an ideal method for forensic body fluid identification because it is highly specific and generates multi-sized amplicon DNA, and successful amplification results can be read out colorimetrically. Here, we show preliminary data on a LAMP method that rapidly identifies body fluids including venous blood, semen, and saliva, based on colorimetric response and image analysis. The method is designed for easy implementation into forensic casework protocols with minimal disruption to DNA analysis. LAMP naturally increases target specificity due to the use of multiple primers for one target and mRNA targets were used for tissue and human specificity. With colorimetric detection as an inherent part of LAMP, samples that are positive or negative for any of the body fluids are readily identified by image capture and analysis, thus eliminating subjectivity. Results show by using the 3D-printed imaging system specific color ranges can be set for easy determination of body fluids. The resulting color change can be seen in <30 min using a universal temperature and primer concentration for all body fluids. This simple method and imaging system allow for minimal hands-on time with objective image analysis and presents a pathway for creating a new potential method for forensic body fluid identification.

Analytical approaches to differential extraction for sexual assault evidence.

Many forensic laboratories face growing demands for the processing of DNA evidence from sexual assault investigations. In these cases, evidence collected from the crime scene or from the victim in the form of a Sexual Assault and Evidence Collection Kit (SAECK) typically contains a mixture of cells from at least two donors. Isolation of DNA contributions to link a sample to an alleged offender requires precise chemical treatment of each sample with the goal of separating epithelial cells from non-sperm cells. Currently, the vast majority of laboratories employ differential chemical lysis methods that require lengthy incubations and several manual steps, preventing complete automation. Numerous alternative methods for the differential extraction (DE) of sexual assault evidence have been developed to provide a solution to the growing backlog of samples observed in the US and other countries. Here, we will discuss the predominant methodology for the DE of DNA from sexual assault samples and review alternative approaches from literature. We illustrate three criteria that provide a measure of success in performing these types of chemical separations and examine all methods based upon these expectations. We conclude by providing some general insight into the application of DE techniques in forensic laboratories and discuss the potential future directions of alternative technologies.