RESUMO
Understanding how shear affects whey protein stability is crucial to deal with typical industrial issues occurring at the bulk solution/surface interface, such as fouling during heat treatments. However, at the state of the art, this effect remains unclear, contrary to that of temperature. This article presents a novel strategy to study the impact of shear rate and concentration on the accumulation of whey protein surficial deposits. It consists in applying a range of shear rates (0-200 s-1) at controlled temperature (65 °C) on whey protein solutions (5-10 wt%) by a parallel plate rheometer equipped with a glass disc, thus allowing the off-line characterization of the deposits by microscopy. Our results highlight an unequivocal effect of increasing shear stress. At 5 wt%, it fosters the formation of primary deposits (≈ 10 µm), whereas at 10 wt% it results in the development of complex branched structures (≈ 50 µm) especially for shear rates ranging from 140 s-1 to 200 s-1. Based on the classification by size of the observed populations, we discuss possible hypotheses for the deposit growth kinetics, involving the interplay of different physico-chemical protein-surface interactions and paving the way to future further investigations.
Assuntos
Reologia , Proteínas do Soro do Leite , Proteínas do Soro do Leite/química , Estresse Mecânico , Resistência ao Cisalhamento , Propriedades de Superfície , CinéticaRESUMO
Dairy powders are mainly produced by droplet spray drying, an articulated process that enables the manufacture of high added-value goods with a long shelf life and well-preserved functional properties. Despite the recent advances, a full understanding of the mechanisms occurring at the droplet scale in drying towers and, consequently, of the impact of process parameters and processed fluid characteristics on the powder properties is far from being achieved. In the wake of previous studies based on a laboratory scale approach, in this work, we provided a global picture of the drying in droplets of dairy protein mixes, i.e., whey proteins and casein micelles, which represent crucial dairy powder ingredients. Using profile visualization and optical microscopy, we explored the shape evolution in droplets with a range of protein contents and compositions typical of commercial powder production. The observation favored the evaluation of the specific role of each protein on the evaporation dynamics, and led to the construction of a phase diagram predictive of the dry droplet shape starting from the characteristics of the initial protein dispersions. Our outcomes represent a further step shedding light on the paradigm linking the physics of drying at the microscale and the nutritional properties of complex dairy powders.
RESUMO
The evaporation of colloidal solutions is frequently observed in nature and in everyday life. The investigation of the mechanisms taking place during the desiccation of biological fluids is currently a scientific challenge with potential biomedical and industrial applications. In the last few decades, seminal works have been performed mostly on dried droplets of saliva, urine and plasma. However, the full understanding of the drying process in biocolloids is far from being achieved and, notably, the impact of solute properties on the morphological characteristics of the evaporating droplets, such as colloid segregation, skin formation and crack pattern development, is still to be elucidated. For this purpose, the use of model colloidal solutions, whose rheological behavior is more easily deducible, could represent a significant boost. In this work, we compare the drying of droplets of whey proteins and casein micelles, the two main milk protein classes, to that of dispersions of silica particles and polymer-coated silica particles, respectively. The mechanical behavior of such biological colloids and model silica dispersions was investigated through the analysis of crack formation, and the measurements of their mechanical properties using indentation testing. The study reveals numerous analogies between dairy and the corresponding model systems, thus confirming the latter as a plausible powerful tool to highlight the signature of the matter at the molecular scale during the drying process.
Assuntos
Caseínas/química , Laticínios/análise , Dessecação , Micelas , Proteínas do Soro do Leite/química , Fenômenos Mecânicos , Modelos Químicos , ReologiaRESUMO
A recent study of red blood cells (RBCs) in shear flow [Lanotte et al., Proc. Natl. Acad. Sci. U.S.A. 113, 13289 (2016)PNASA60027-842410.1073/pnas.1608074113] has demonstrated that RBCs first tumble, then roll, transit to a rolling and tumbling stomatocyte, and finally attain polylobed shapes with increasing shear rate, when the viscosity contrast between cytosol and blood plasma is large enough. Using two different simulation techniques, we construct a state diagram of RBC shapes and dynamics in shear flow as a function of shear rate and viscosity contrast, which is also supported by microfluidic experiments. Furthermore, we illustrate the importance of RBC shear elasticity for its dynamics in flow and show that two different kinds of membrane buckling trigger the transition between subsequent RBC states.
Assuntos
Eritrócitos/fisiologia , Modelos Biológicos , Tamanho Celular , Simulação por Computador , Citosol/fisiologia , Elasticidade , Membrana Eritrocítica/fisiologia , Eritrócitos/citologia , Técnicas Analíticas Microfluídicas , Plasma/fisiologia , Resistência ao CisalhamentoRESUMO
The morphology of dried blood droplets derives from the deposition of red cells, the main components of their solute phase. Up to now, evaporation-induced convective flows were supposed to be at the base of red cell distribution in blood samples. Here, we present a direct visualization by videomicroscopy of the internal dynamics in desiccating blood droplets, focusing on the role of cell concentration and plasma composition. We show that in diluted suspensions, the convection is promoted by the rich molecular composition of plasma, whereas it is replaced by an outward red blood cell displacement front at higher hematocrits. We also evaluate by ultrasounds the effect of red cell deposition on the temporal evolution of sample rigidity and adhesiveness.
RESUMO
Blood viscosity decreases with shear stress, a property essential for an efficient perfusion of the vascular tree. Shear thinning is intimately related to the dynamics and mutual interactions of RBCs, the major component of blood. Because of the lack of knowledge about the behavior of RBCs under physiological conditions, the link between RBC dynamics and blood rheology remains unsettled. We performed experiments and simulations in microcirculatory flow conditions of viscosity, shear rates, and volume fractions, and our study reveals rich RBC dynamics that govern shear thinning. In contrast to the current paradigm, which assumes that RBCs align steadily around the flow direction while their membranes and cytoplasm circulate, we show that RBCs successively tumble, roll, deform into rolling stomatocytes, and, finally, adopt highly deformed polylobed shapes for increasing shear stresses, even for semidilute volume fractions of the microcirculation. Our results suggest that any pathological change in plasma composition, RBC cytosol viscosity, or membrane mechanical properties will affect the onset of these morphological transitions and should play a central role in pathological blood rheology and flow behavior.
Assuntos
Eritrócitos/fisiologia , Técnicas Analíticas Microfluídicas/métodos , Reologia/métodos , Velocidade do Fluxo Sanguíneo/fisiologia , Elasticidade/fisiologia , Deformação Eritrocítica/fisiologia , Eritrócitos/citologia , Testes Hematológicos , Humanos , Microcirculação/fisiologia , Microscopia/métodos , Plasma , Estresse Mecânico , ViscosidadeRESUMO
Red blood cells (RBCs) perform essential functions in human body, such as gas exchange between blood and tissues, thanks to their ability to deform and flow in the microvascular network. The high RBC deformability is mainly due to the viscoelastic properties of the cell membrane. Since an impaired RBC deformability could be found in some diseases, such as malaria, sickle cell anemia, diabetes and hereditary disorders, there is the need to provide further insight into measurement of RBC deformability in a physiologically relevant flow field. Here, RBCs deformability has been studied in terms of the minimum apparent plasma-layer thickness by using high-speed video microscopy of RBCs flowing in cylindrical glass capillaries. An in vitro systematic microfluidic investigation of RBCs in micro-confined conditions has been performed, resulting in the determination of the RBCs time recovery constant, RBC volume and surface area and RBC membrane shear elastic modulus and surface viscosity. It has been noticed that the deformability of RBCs induces cells aggregation during flow in microcapillaries, allowing the formation of clusters of cells. Overall, our results provide a novel technique to estimate RBC deformability and also RBCs collective behavior, which can be used for the analysis of pathological RBCs, for which reliable quantitative methods are still lacking.
Assuntos
Deformação Eritrocítica , Eritrócitos/citologia , Microfluídica/métodos , Forma Celular , Volume de Eritrócitos , Humanos , Plasma/citologiaRESUMO
The confined flow of red blood cells (RBCs) in microvasculature is essential for oxygen delivery to body tissues and has been extensively investigated in the literature, both in vivo and in vitro. One of the main problems still open in microcirculation is that flow resistance in microcapillaries in vivo is higher than that in vitro. This discrepancy has been attributed to the glycocalyx, a macromolecular layer lining the inner walls of vessels in vivo, but no direct experimental evidence of this hypothesis has been provided so far. Here, we investigate the flow behavior of RBCs in glass microcapillaries coated with a polymer brush (referred to as "hairy" microcapillaries as opposed to "bare" ones with no coating), an experimental model system of the glycocalyx. By high-speed microscopy imaging and image analysis, a velocity reduction of RBCs flowing in hairy microcapillaries as compared to bare ones is indeed found at the same pressure drop. Interestingly, such slowing down is larger than expected from lumen reduction due to the polymer brush and displays an on-off trend with a threshold around 70 nm of polymer brush dry thickness. Above this threshold, the presence of the polymer brush is associated with an increased RBC deformation, and RBC velocity is independent on polymer brush thickness (at the same pressure drop). In conclusion, this work provides direct support to the hypothesis that the glycocalyx is the main factor responsible of the higher flow resistance found in microcapillaries in vivo.
RESUMO
We report on the design of microchannels made of glass capillary coated with polymer brushes elaborated by the so-called "grafting-from" technique. We present measurements of velocity profiles for pressure-driven flows of water in such "hairy" capillaries. We show that the flow reduction induced by the presence of the brush is unexpectedly greater than what could be anticipated from simple geometric arguments on the reduction of the effective capillary diameter or from predictions by models describing the brush layer as a poro-elastic boundary.