Thermal, viscoelastic, and electrical properties of thermoplastic polyurethane films reinforced with multi-walled carbon nanotubes.

Thermoplastic polyurethane (TPU) doped with multi-walled carbon nanotubes (MWCNTs) at 1, 3, 5, and 7 wt% has been studied. The effect of MWCNTs on thermal, viscoelastic, and electric properties in the TPU matrix was characterized by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and by impedance spectroscopy. The results show that the thermal, electrical, and viscoelastic properties, such as the glass transition temperature, shifted towards high temperatures. The melting temperature decreased, and the conductivity and the storage modulus increased by 61.5 % and 58.3 %. The previously observed behavior on the films is due to the increase in the mass percentage of carbon nanotubes (CNTs) in the TPU matrix. Also, it can be said that the CNTs were homogeneously dispersed in the TPU matrix, preventing the movement of the polymer chains, and generating channels or connections that increase the conductivity and improve the thermal properties of the material.

Morphological Electrical and Hardness Characterization of Carbon Nanotube-Reinforced Thermoplastic Polyurethane (TPU) Nanocomposite Plates.

The impacts on the morphological, electrical and hardness properties of thermoplastic polyurethane (TPU) plates using multi-walled carbon nanotubes (MWCNTs) as reinforcing fillers have been investigated, using MWCNT loadings between 1 and 7 wt%. Plates of the TPU/MWCNT nanocomposites were fabricated by compression molding from extruded pellets. An X-ray diffraction analysis showed that the incorporation of MWCNTs into the TPU polymer matrix increases the ordered range of the soft and hard segments. SEM images revealed that the fabrication route used here helped to obtain TPU/MWCNT nanocomposites with a uniform dispersion of the nanotubes inside the TPU matrix and promoted the creation of a conductive network that favors the electronic conduction of the composite. The potential of the impedance spectroscopy technique has been used to determine that the TPU/MWCNT plates exhibited two conduction mechanisms, percolation and tunneling conduction of electrons, and their conductivity values increase as the MWCNT loading increases. Finally, although the fabrication route induced a hardness reduction with respect to the pure TPU, the addition of MWCNT increased the Shore A hardness behavior of the TPU plates.

Intensification of the O3/TiO2/UV advanced oxidation process using a modified flotation cell.

The present work reports the use of a flotation cell as a prospective reactor for ozonation and the intensification of ozonation (catalytic ozonation and photocatalytic ozonation). The effect of the pH, ozone concentration and loading catalyst was investigated. The performance of the flotation cell was compared with that of conventional reactors used in ozonation through the ozone utilized index (OUI), which was proposed in this work and relates the amount of ozone supplied to the system per milligram of degraded pollutant. The flotation cell has the lowest OUI, which indicates that the ozone supplied is highly consumed. It was found that the modified flotation cell is an efficient reactor for ozonation, catalytic ozonation and photocatalytic ozonation processes because total diclofenac degradation was achieved in a short time, mass transfer limitations were not found (Ha = 7.26), and it presented a relatively low energy consumption (1.15 kW h m-3).

Experimental data on the degradation of caffeine by photo-electro-fenton using BDD electrodes at pilot plant.

Emerging contaminants (EC) are an imminent risk due to potential toxicity to aquatic ecosystems and human beings. This type of contaminants is found in low concentrations and usually present incomplete or inefficient removal by conventional treatments, which entail its permanence and constant increase. Advanced Oxidation Processes (AOP) are an alternative for the elimination of dangerous and resistant substances in wastewater. So, this research evaluates the caffeine degradation in aqueous solution by AOP, such as: Fenton, Electro-Oxidation (EO) with boron doped diamond (BDD) electrodes, Electro-Fenton (EF) and Photo-Electro-Fenton (PEF). The influences of pH, concentration of the supporting electrolyte and specific electric charge were investigated using a Taguchi׳s factorial design, which allowed to identify the contribution of each variable in the process. The data obtained in this work can be useful for scaling process and cost analysis because it provide the information at pilot plant scale.