Increasing the Resolution of Field-Flow Fractionation with Increasing Crossflow Gradients.

The resolution of flow field-flow fractionation (flow FFF) depends primarily on the crossflow rate and its change over time. In this work, we demonstrate a method for modulation of the crossflow rate during separation that increases the peak-to-peak resolution of the resulting fractograms. In classical FFF methods, the crossflow rate is either maintained constant or decreased during the separation of the different species. In this work, higher resolution between peaks was achieved by a novel gradient method in which the crossflow is increased briefly during separation to allow stronger retention of the later eluting peaks. We first outline the theoretical basis by which improved separation is achieved. We confirm our hypothesis by quantifying the impact of increasing crossflow on the resolution between a monoclonal antibody monomer and its high-molecular-weight aggregate. We then demonstrate that this method is applicable to two different FFF methods (AF4 and HF5) and various pharmaceutically relevant samples (monoclonal antibodies and adeno-associated viruses). Finally, we hypothesize that increasing the force perpendicular to the laminar flow as described here is broadly applicable to all FFF methods and improves the quality of FFF-based separations.

Establishing stereochemical comparability in phosphorothioate oligonucleotides with nuclease P1 digestion coupled with LCMS analysis.

Stereochemical comparability is critical for ensuring manufacturing consistency in therapeutic phosphorothioate oligonucleotides. Currently, analytical methods for this assessment are limited. We hereby report on a novel protocol capable of detecting a stereochemistry change in a single phosphorothioate linkage by employing nuclease P1 digestion of the oligonucleotide with subsequent LCMS analysis of the resulting fragments. The method proves valuable for establishing stereochemical comparability and for ensuring manufacturing consistency of oligonucleotide therapeutics.

Development of UPLC-UV-ELSD Method for Fatty Acid Profiling in Polysorbate 80 and Confirmation of the Presence of Conjugated Fatty Acids by Mass Spectrometry, UV Absorbance and Proton Nuclear Magnetic Resonance Spectroscopy.

Polysorbate 80 (PS80), a chemical substance composed of sorbitol, ethylene glycol, and fatty acids, is commonly used in pharmaceutical drug products to stabilize formulations. However, recent studies have demonstrated that PS80 may hydrolyze over time and the released free fatty acids (FFAs) may lead to particle formation. Naming conventions of fatty acids in current pharmacopeia and in products' certificates of analysis (CoA) of PS80 do not typically distinguish between isomeric species of fatty acids in PS80. Thus, methods to fully characterize the fatty acid species present in PS80 raw materials are needed to enhance quality control strategies of pharmaceuticals using PS80. Here, extended effort is taken to characterize fatty acids in hydrolyzed PS80 raw materials and elucidate the identities of isomeric fatty acid species. In this work, a method was developed and optimized for separation and detection of fatty acids in alkaline hydrolyzed PS80 raw materials using ultra performance liquid chromatography (UPLC) with ultra-violet (UV) detection and evaporative light scattering detection (ELSD). Fatty acids not specified in the current pharmacopeias were detected in PS80 raw material by the developed LC-UV-ELSD method including conjugated forms of linoleic and linolenic fatty acid species. Their identities were orthogonally confirmed by retention time agreement with analytical standards, accurate mass by high resolution mass spectrometry, UV absorbance, and proton nuclear magnetic resonance spectroscopy. The detected conjugated fatty acids are theoretically more hydrophobic and less soluble than their unconjugated counterparts and may increase the propensity of PS80 to form particles upon hydrolysis. This work highlights the need for better quality control of PS80 raw material, as it may eventually play a critical role in product quality of therapeutic proteins.

Conformational Changes and Drivers of Monoclonal Antibody Liquid-Liquid Phase Separation.

Liquid-liquid phase separation is a phenomenon within biology whereby proteins can separate into dense and more dilute phases with distinct properties. Three antibodies that undergo liquid-liquid phase separation were characterized in the protein-rich and protein-poor phases. In comparison to the protein-poor phase, the protein-rich phase demonstrates more blue-shift tryptophan emissions and red-shifted amide I absorbances. Large changes involving conformational isomerization around disulfide bonds were observed using Raman spectroscopy. Amide I and protein fluorescence differences between the phases persisted to temperatures above the critical temperature but ceased at the temperature at which aggregation occurred. In addition, large changes occurred in the structural organization of water molecules within the protein-rich phase for all three antibodies. It is hypothesized that as the proteins have the same chemical potential in both phases, the protein viscosity is higher in the protein-rich phase resulting in slowed diffusion dependent protein aggregation in this phase. For all three antibodies we performed accelerated stability studies and found that the protein-rich phase aggregated at the same rate or slower than the protein-poor phase.

Characterizing Repellencies of Methyl Benzoate and Its Analogs against the Common Bed Bug, Cimex lectularius.

Bed bug infestations are on the rise globally, and remediation efforts are becoming more expensive and difficult to achieve due to rising insecticide resistance in the pest populations. This study evaluates Cimex lectularius behavior in the presence of attractive elements-aggregation pheromone or food source (human blood)-and the reported botanical repellent methyl benzoate (MB), several MB analogs, as well as the well-known insect repellent, N,N-diethyl-meta-toluamide (DEET). Utilizing EthoVision, a video tracking system, we now report that MB and several of its analogs exhibit strong spatial repellency against C. lectularius, with methyl 2-methoxybenzoate (M2MOB) and methyl 3-methoxybenzoate (M3MOB) exhibiting the strongest repellent effects. Further, our data showed that MB, M2MOB, M3MOB, and DEET exhibit repellency against a pyrethroid resistant strain of C. lectularius.

pH-Dependent Phase Behavior and Stability of Cationic Lipid-mRNA Nanoparticles.

Lipid nanoparticles (LNPs) containing mRNA can deliver genetic material to cells for use as vaccines or protein replacement therapies. We characterized the effect of solution pH on cationic LNPs containing green fluorescent protein (EGFP) mRNA and their transfection efficiency. We compared the structural and colloidal properties of mRNA LNPs with LNPs not containing mRNA and mRNA free in solution. We used a combination of biophysical technique to build a picture of the structure of the lipids and mRNA across pH and temperature in the form of an empirical phase diagram (EPD). A combination of Fourier-transform infrared (FTIR) spectroscopy and differential scanning calorimetry was used to investigate lipid phase behavior. The mRNA-LNPs transition from an inverse hexagonal phase at pH values below the pKa of the cationic lipid to a lamellar phase above the pKa. At higher temperatures the mRNA-LNPs also transitioned from an inverse hexagonal phase to a lamellar phase indicating the inverse hexagonal phase is more thermodynamically favorable. Based on circular dichroism, the mRNA within the LNP has more A form structure at pH values below the lipid pKa than above it. Optical density, zeta potential and dynamic light scattering measurements were used to probe the colloidal stability of the mRNA-LNPs. The particles were larger and more prone to aggregation below the pKa. A stability study was performed to relate the biophysical characteristics to the storage of the particles in solution at 4 and 25 °C. mRNA-LNPs had the highest transfection efficiency and stability at pH values below the pKa. However, there was a trade-off between the stability and aggregation propensity since at very low pH the particles were most prone to aggregation. We performed kinetic experiments to show that the time scale of the pH-dependent phase behavior is slow (6 hour transition) and the transition from lamellar to inverse hexagonal phases is irreversible. This suggests that the lamellar phase is less stable and kinetically trapped. Our findings deepen our structural understanding of mRNA-LNPs and will aid the development of related formulations.

Visible Light Degradation of a Monoclonal Antibody in a High-Concentration Formulation: Characterization of a Tryptophan-Derived Chromophoric Photo-product by Comparison to Photo-degradation of N-Acetyl-l-tryptophan Amide.

We investigated the discoloration of a highly concentrated monoclonal antibody (mAbZ) in sodium acetate (NaAc) and histidine/lysine (His/Lys) buffer after exposure to visible light. The color change of the mAbZ formulation was significantly more intense in NaAc buffer and developed a characteristic absorbance with a λmax of ca. 450 nm. We characterized this photo-chemically generated chromophore by comparison with visible light photo-degradation of a concentrated solution of a model compound for protein Trp residues, N-acetyl-l-tryptophan amide (NATA). The photo-degradation of NATA generated a chromophoric product with a λmax of ca. 450 nm and UV-vis spectroscopic properties identical to those of the product generated from mAbZ. This product was isolated and analyzed by high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) and 1H, 13C, and 1H-13C heteronuclear single-quantum correlation NMR spectroscopy. MS/MS analysis reveals a product characterized by the loss of 33 Da from NATA, referred to as NATA-33. Together, the NMR data suggest that this product may be N-(2,4-dihydrocyclopenta[b]indol-2-yl)acetamide (structure P3a) or a tautomer (P3b-d).

Toxicity of Methyl Benzoate and Analogs to Adult Aedes aegypti.

Methyl benzoate is a natural product (floral volatile organic compound) that is currently used as a food flavoring ingredient. This compound has shown to be insecticidal in laboratory studies against agricultural and urban pests, including spotted wing drosophila Drosophila suzukii, brown marmorated stink bug Hyalomorpha halys, the diamondback moth Plutella xylostella, and the common bed bug Cimex lectularius, to name several insect taxa. In this study we topically treated adult Aedes aegypti females with methyl benzoate and analogs and determined their toxicities. We found that among adult females, 4 analogs-butyl benzoate, n-pentyl benzoate, vinyl benzoate, and methyl 3-methoxybenzoate-were more toxic than the parent compound, methyl benzoate.

Detection and monitoring of Drosophila suzukii in raspberry and cherry orchards with volatile organic compounds in the USA and Europe.

Spotted wing drosophila (SWD) causes significant economic loss in fruit crops to growers worldwide. There is immediate need for efficacious and selective monitoring tools that can detect infestations early. Previously, volatile organic compounds derived from apple were studied and a quinary chemical component blend (QB) was identified as the key SWD attractant in a blueberry orchard in the United States. This study's aim was to determine whether previously observed QB efficacy, selectivity, and early detection levels could be attained within raspberry and cherry fields in the USA and Europe. Results demonstrated that sticky trap baited QB dispenser provided earlier SWD detection potential than the usually adopted apple cider vinegar (ACV) trap. The number of SWD captured/trap by QB baited trapping systems was significantly lower than that of the ACV trap. However, percent SWD/trap of QB baited traps was same within cherry. Lower non-target capture will save farmer/grower's labor and time allocated to traps installation and drosophila species identification. Within the USA, SWD selectivity of QB baited liquid traps was consistently greater than sticky trap in raspberry field, suggesting that the QB dispenser can be an alternative to the standard ACV lure and that trap design could improve selectivity further.

Heterocyclic Amine-Induced Feeding Deterrence and Antennal Response of Honey Bees.

The productivity and survival of managed honey bee colonies is negatively impacted by a diverse array of interacting factors, including exposure to agrochemicals, such as pesticides. This study investigated the use of volatile heterocyclic amine (HCA) compounds as potential short-term repellents that could be employed as feeding deterrents to reduce the exposure of bees to pesticide-treated plants. Parent and substituted HCAs were screened for efficacy relative to the repellent N,N-diethyl-meta-toluamide (DEET) in laboratory and field experiments. Additionally, electroantennogram (EAG) recordings were conducted to determine the level of antennal response in bees. In video-tracking recordings, bees were observed to spend significantly less time with an HCA-treated food source than an untreated source. In a high-tunnel experiment, the HCA piperidine was incorporated in a feeding station and found to significantly reduce bee visitations relative to an untreated feeder. In field experiments, bee visitations were significantly reduced on melon flowers (Cucumis melo L.) and flowering knapweed (Centaurea stoebe L.) that were sprayed with a piperidine solution, relative to untreated plants. In EAG recordings, the HCAs elicited antennal responses that were significantly different from control or vehicle responses. Overall, this study provides evidence that HCAs can deter individual bees from food sources and suggests that this deterrence is the result of antennal olfactory detection. These findings warrant further study into structure-activity relationships that could lead to the development of short-term repellent compounds that are effective deterrents to reduce the contact of bees to pesticide-treated plants.

Optimization of RG1-VLP vaccine performance in mice with novel TLR4 agonists.

Current human papilloma virus (HPV) vaccines provide substantial protection against the most common HPV types responsible for oral and anogenital cancers, but many circulating cancer-causing types remain that lack vaccine coverage. The novel RG1-VLP (virus-like particle) vaccine candidate utilizes the HPV16-L1 subunit as a backbone to display an inserted HPV16-L2 17-36 a.a. "RG1" epitope; the L2 RG1 epitope is conserved across many HPV types and the generation of cross-neutralizing antibodies (Abs) against which has been demonstrated. In an effort to heighten the immunogenicity of the RG1-VLP vaccine, we compared in BALB/c mice adjuvant formulations consisting of novel bacterial enzymatic combinatorial chemistry (BECC)-derived toll-like receptor 4 (TLR4) agonists and the aluminum hydroxide adjuvant Alhydrogel. In the presence of BECC molecules, consistent improvements in the magnitude of Ab responses to both HPV16-L1 and the L2 RG1 epitope were observed compared to Alhydrogel alone. Furthermore, neutralizing titers to HPV16 as well as cross-neutralization of pseudovirion (PsV) types HPV18 and HPV39 were augmented in the presence of BECC agonists as well. Levels of L1 and L2-specific Abs were achieved after two vaccinations with BECC/Alhydrogel adjuvant that were equivalent to or greater than levels achieved with 3 vaccinations with Alhydrogel alone, indicating that the presence of BECC molecules resulted in accelerated immune responses that could allow for a decreased dose schedule for VLP-based HPV vaccines. In addition, dose-sparing studies indicated that adjuvantation with BECC/Alhydrogel allowed for a 75% reduction in antigen dose while still retaining equivalent magnitudes of responses to the full VLP dose with Alhydrogel. These data suggest that adjuvant optimization of HPV VLP-based vaccines can lead to rapid immunity requiring fewer boosts, dose-sparing of VLPs expensive to produce, and the establishment of a longer-lasting humoral immunity.

Terpenoid-Induced Feeding Deterrence and Antennal Response of Honey Bees.

Multiple interacting stressors negatively affect the survival and productivity of managed honey bee colonies. Pesticides remain a primary concern for beekeepers, as even sublethal exposures can reduce bee immunocompetence, impair navigation, and reduce social communication. Pollinator protection focuses on pesticide application guidelines; however, a more active protection strategy is needed. One possible approach is the use of feeding deterrents that can be delivered as an additive during pesticide application. The goal of this study was to validate a laboratory assay designed to rapidly screen compounds for behavioral changes related to feeding or feeding deterrence. The results of this investigation demonstrated that the synthetic Nasonov pheromone and its terpenoid constituents citral, nerol, and geraniol could alter feeding behavior in a laboratory assay. Additionally, electroantennogram assays revealed that these terpenoids elicited some response in the antennae; however, only a synthetic Nasonov pheromone, citral, and geraniol elicited responses that differed significantly from control and vehicle detections.

Synthetic Cationic Autoantigen Mimics Glatiramer Acetate Persistence at the Site of Injection and Is Efficacious Against Experimental Autoimmune Encephalomyelitis.

A synthetic peptide, K-PLP, consisting of 11-unit poly-lysine (K11) linked via polyethylene glycol (PEG) to proteolipid protein epitope (PLP) was synthesized, characterized, and evaluated for efficacy in ameliorating experimental autoimmune encephalomyelitis (EAE) induced by PLP. K-PLP was designed to mimic the cationic nature of the relapsing-remitting multiple sclerosis treatment, glatiramer acetate (GA). With a pI of ~10, GA is able to form visible aggregates at the site of injection via electrostatic interactions with the anionic extracellular matrix. Aggregation further facilitates the retention of GA at the site of injection and draining lymph nodes, which may contribute to its mechanism of action. K-PLP with a pI of ~11, was found to form visible aggregates in the presence of glycosaminoglycans and persist at the injection site and draining lymph nodes in vivo, similar to GA. Additionally, EAE mice treated with K-PLP showed significant inhibition of clinical symptoms compared to free poly-lysine and to PLP, which are the components of K-PLP. The ability of the poly-lysine motif to retain PLP at the injection site, which increased the local exposure of PLP to immune cells may be an important factor affecting drug efficacy.

Fumigation Activities of Methyl Benzoate and Its Derivatives Against the Common Bed Bug (Hemiptera: Cimicidae).

Common bed bug Cimex lectularius (L.) (Hemiptera: Cimicidae) infestations are on the rise and due to the development of pesticide resistance they are becoming more difficult to control, affordably. We evaluated a naturally occurring compound methyl benzoate (MB) and related analogs, previously reported to have insecticidal activity on several agricultural pests, for its fumigant action on the common bed bug, C. lectularius L. A discriminating concentration was used to determine the effectiveness of MB, and several of its analogs as fumigants in a laboratory assay. It was found that MB provided >90% control of adult bed bugs in this laboratory fumigant assay. LC50 values were calculated for MB against both a pyrethroid-susceptible and a pyrethroid-resistant strain of common bed bugs. It was determined that both strains were susceptible in this laboratory assay. However, when MB was tested in a field-like assay and compared to a commercially available bed bug control product, it was found to be significantly less effective compared to the commercial product. Our study has found that while MB has the potential to be used as a bed bug control agent, refinements in the delivery system will be needed to increase efficacy under field-like conditions.

Comparison of Polysorbate 80 Hydrolysis and Oxidation on the Aggregation of a Monoclonal Antibody.

Polysorbates are used ubiquitously in protein therapeutic drugs to help minimize adsorption to surfaces and aggregation. It has been recognized that polysorbate can itself degrade and in turn result in loss of efficacy of therapeutic proteins. We studied the 2 main pathways of polysorbate 80 (PS80) degradation, enzymatic ester hydrolysis, and oxidation. Degraded polysorbates were quantified through mass spectrometry to identify the loss of individual components. Next Langmuir trough adsorption isotherms were used to characterize changes in the surface activity of the degraded polysorbates. PS80 degraded via hydrolysis results in slower surface adsorption rates, whereas the oxidized PS80 show increased surface activity. However, the critical micelle concentration remained unchanged. A monoclonal antibody was formulated with stock and degraded polysorbates to probe their ability to prevent aggregation. Hydrolyzed polysorbate resulted in a large increase in particle formation during shaking stress. Oxidized PS80 was still protective against aggregation for the monoclonal antibody. Monomer loss as measured by SEC was comparable in formulations without PS80 to those with esterase hydrolyzed PS80. Monomer loss for oxidized PS80 was similar to that of nondegraded PS80. Hydrolysis of PS80 resulted in free fatty acids which formed insoluble particles during mechanical agitation which stimulated protein aggregation.

Effects of Glycan Structure on the Stability and Receptor Binding of an IgG4-Fc.

A series of well-defined N-glycosylated IgG4-Fc variants were utilized to investigate the effect of glycan structure on their physicochemical properties (conformational stability and photostability) and interactions with an Fc γ receptor IIIA (FcγRIIIA). High mannose (HM, GlcNAc2Man(8+n) [n = 0-4]), Man5 (GlcNAc2Man5), GlcNAc1, and N297Q IgG4-Fc were prepared in good quality. The physical stability of these IgG4-Fc variants was examined with differential scanning calorimetry and intrinsic fluorescence spectroscopy. Photostability was assessed after photoirradiation between 295 and 340 nm (λ max = 305 nm), and HPLC-MS/MS analysis of specific products was performed. The size of glycans at Asn297 affects the yields of light-induced Tyr side-chain fragmentation products, where the yields decreased in the following order: N297Q > GlcNAc1 > Man5 > HM. These yields correlate with the thermal stability of the glycoforms. The HM and Man5 glycoforms display increased affinity for FcγRIIIA by at least 14.7-fold compared with GlcNAc1 IgG4-Fc. The affinities measured for the HM and Man5 IgG4-Fc (0.39-0.52 µM) are similar to those measured for fucosylated IgG1. Dependent on the mechanisms of action of IgG4 therapeutics, such glycoforms may need to be carefully monitored. The nonglycosylated N297Q IgG4-Fc did not present measurable affinity to FcγRIIIA.

Cis/Trans Isomerization of Unsaturated Fatty Acids in Polysorbate 80 During Light Exposure of a Monoclonal Antibody-Containing Formulation.

Light exposure of a monoclonal antibody formulation containing polysorbate 80 (PS80) leads to cis/trans isomerization of monounsaturated and polyunsaturated fatty acids. This cis/trans isomerization was monitored by positive electrospray ionization mass spectrometry of intact PS80 components as well as by negative ion electrospray ionization mass spectrometry analysis of free fatty acids generated via esterase-catalyzed hydrolysis. The light-induced cis/trans isomerization of unsaturated fatty acids in PS80 required the presence of the monoclonal antibody, or, at a minimum (for mechanistic studies), a combination of N-acetyltryptophan amide and glutathione disulfide, suggesting the involvement of thiyl radicals generated by photoinduced electron transfer from Trp to the disulfide. Product analysis confirmed the conversion of PS80-bound oleic acid to elaidic acid; furthermore, together with linoleic acid, we detected conjugated linoleic acids in PS80, which underwent light-induced cis/trans isomerization.

Soluble Antigen Arrays for Selective Desensitization of Insulin-Reactive B Cells.

Autoimmune diseases are believed to be highly dependent on loss of immune tolerance to self-antigens. Currently, no treatments have been successful clinically in inducing autoantigen-specific tolerance, including efforts to utilize antigen-specific immunotherapy (ASIT) to selectively correct the aberrant autoimmunity. Soluble antigen arrays (SAgAs) represent a novel autoantigen delivery system composed of a linear polymer, hyaluronic acid (HA), displaying multiple copies of conjugated autoantigen. We have previously reported that soluble antigen arrays displaying proteolipid peptide (SAgAPLP) induced tolerance to this specific multiple sclerosis (MS) autoantigen. Utilizing SAgA technology, we have developed a new ASIT as a possible type 1 diabetes (T1D) therapeutic by conjugating human insulin to HA, known as soluble antigen array insulin (SAgAIns). Three types were synthesized, low valency lvSAgAIns (2 insulins per HA), medium valency mvSAgAIns (4 insulins per HA), and, high valency hvSAgAIns (9 insulins per HA), to determine if valency differentially modulates the ex vivo activity of insulin-binding B cells (IBCs). Extensive biophysical characterization was performed for the SAgA molecules. SAgAIns molecules were successfully used to affect the biologic activity of IBCs by inducing desensitization of the B cell antigen receptors (BCR). SAgAIns bound specifically to insulin-reactive B cells without blocking epitopes recognized by antibodies against the Fc regions of membrane immunoglobulin or CD79 transducer components of the BCR. Preincubation of IBCs (125Tg) with SAgAIns, but not HA alone, rendered the IBCs refractory to restimulation. SAgAIns induced a decrease in BCR expression and IP3R-mediated intracellular calcium release. Surprisingly, SAgAIns binding to BCR on the surface of IBCs induced the observed effects at both high and low SAgAIns valency. Future studies aim to test the effects of SAgAIns on disease progression in the VH125.NOD mouse model of T1D.

Glatiramer acetate persists at the injection site and draining lymph nodes via electrostatically-induced aggregation.

Glatiramer acetate (GA) is widely prescribed for the treatment of relapsing-remitting multiple sclerosis, however, the mechanism of action is still not fully understood. We investigated the structural properties of GA and examined alterations to the drug upon injection into the subcutaneous space. First, a variety of biophysical characterization techniques were employed to characterize GA in solution. GA was found to exist as alpha helices in solution with a hydrodynamic radius of ~3 nm in size. To simulate GA behavior at the site of injection, GA was injected into a solution of 1.5 MDa hyaluronic acid (HA). Visible aggregates were observed immediately upon injection and subsequent testing indicated aggregation was driven by electrostatic interactions between the positively-charged GA and negatively-charged HA. In vivo testing confirmed GA formed spherical particles in the nano- to micrometer size range, suggesting this mechanism contributes to persistence at the injection site and in draining lymph nodes. The aggregates were found to associate with glycosaminoglycans, suggesting an electrostatic mechanism of induced aggregation like the simulated injection. These novel observations may help explain the complex immunomodulatory mechanisms of GA and adverse injection site reactions seen in patients.

Effect of 2 Emulsion-Based Adjuvants on the Structure and Thermal Stability of Staphylococcus aureus Alpha-Toxin.

The effects of 2 squalene-based emulsion adjuvant systems (MedImmune emulsion 0 [ME.0] and Stable Emulsion [SE]) on the structure and stability of the recombinant protein antigen alpha-toxin (AT), a potential vaccine candidate for Staphylococcus aureus infection, were investigated using Fourier-transform infrared spectroscopy and both steady-state and time-resolved intrinsic fluorescence spectroscopy as well as differential scanning calorimetry (DSC). A component study, performed to identify the effects of the individual emulsion's components, showed negligible interactions between AT and ME.0. DSC analysis showed the ME.0 emulsion thermally destabilized AT, probably because of changes in the buffer composition of AT upon mixing. The SE emulsion caused increased alpha-helix and decreased beta-sheet content in AT, and a significant blue shift in the fluorescence spectra relative to that of AT in solution. DSC analysis showed SE exerted a dramatic thermal stabilization effect on AT, probably attributable to an interaction between AT and SE. Size exclusion chromatography showed a complete loss in the recovery of AT when mixed with SE, but not ME.0, indicating a high degree of interaction with SE. This work successfully characterized the biophysical properties of AT in the presence of 2 emulsion adjuvants including a component study to rationalize how emulsion components affect protein antigen stability.