Nonlinear coda wave interferometry for the global evaluation of damage levels in complex solids.

A nonlinear acoustic method to assess the damage level of a complex medium is discussed herein. Thanks to the highly nonlinear elastic signatures of cracks or, more generally, internal solid contacts, this method is able to distinguish between contributions from linear wave scattering by a heterogeneity and contributions from nonlinear scattering by a crack or unbounded interface. The coda wave interferometry (CWI) technique is applied to reverberated and scattered waves in glass plate samples featuring various levels of damage. The ultrasonic coda signals are recorded in both the absence and presence of an independent and lower-frequency elastic "pump" wave, before being analyzed by CWI. The monitored CWI parameters quantifying changes in these coda signals, which therefore quantify the nonlinear wave-mixing effects between the coda and pump waves, are found to be dependent on the damage level in the sample. A parametric study is also performed to analyze the influence of sensor positions and average temperature on the method's output. The reported results could be applied to the non-destructive testing and evaluation of complex-shape materials and multiple scattering samples, for which conventional ultrasonic methods show strong limitations.

Validation of a thermal bias control technique for Coda Wave Interferometry (CWI).

The Coda Wave Interferometry (CWI) analysis serves to monitor the variation of propagation velocity in a heterogeneous medium with high precision (10(-3)% in relative terms). In combination with acoustoelastic theory, this type of analysis offers an NDT method for stress evaluation and/or damage detection. Since the CWI method is intended to evaluate extreme levels of accuracy, the presence of bias under certain circumstances can undermine evaluation results and/or test repeatability. In this paper, we offer a bias control technique involving the use of a second (reference) specimen for CWI analysis that is designed to compensate: (1) the thermally-induced velocity variation due to environmental temperature fluctuations; and (2) bias originating from experimental procedures. The presentation of this technique contains both a theoretical analysis and experimental protocol for the purpose of implementation. Furthermore, comparisons of experimental results have been included in order to demonstrate the utility of this bias control technique under laboratory conditions.

Study of stress-induced velocity variation in concrete under direct tensile force and monitoring of the damage level by using thermally-compensated Coda Wave Interferometry.

In this paper, we describe an experimental study of concrete behavior under a uniaxial tensile load by use of the thermally-compensated Coda Wave Interferometry (CWI) analysis. Under laboratory conditions, uniaxial tensile load cycles are imposed on a cylindrical concrete specimen, with continuous ultrasonic measurements being recorded within the scope of bias control protocols. A thermally-compensated CWI analysis of multiple scattering waves is performed in order to evaluate the stress-induced velocity variation. Concrete behavior under a tensile load can then be studied, along with CWI results from both its elastic performance (acoustoelasticity) and plastic performance (microcracking corresponding to the Kaiser effect). This work program includes a creep test with a sustained, high tensile load; the acoustoelastic coefficients are estimated before and after conducting the creep test and then used to demonstrate the effect of creep load.