One-step orbit reconstruction using PMMA implants following hyperostotic sphenoid wing meningioma removal: Evolution of the technique in short clinical series.

Purpose: To report our experience with patient specific implants for one-step orbit reconstruction following hyperostotic SWM removal and to describe the evolution of the technique through three surgical cases. Methods: Three cases of one-step SWM removal and orbit reconstruction are described. All cases are given consecutively to describe the evolution of the technique. Hyperostotic bone resection was facilitated by electromagnetic navigation and cutting guides (templates). Based on a 3D model, silicone molds were made using CAD/CAM. Then PMMA implant was fabricated from these molds. The implant was adjusted and fixed to the cranium with titanium screws after tumor removal. Results: Following steps of the procedure changed over these series: hyperostotic bone resection, implant thickness control, implant overlay features, anatomic adjustments, implant fixation. The proptosis resolved in all cases. In one patient the progressive visual acuity deterioration was recognized during the follow-up. No oculomotor disturbances and no tumor regrowth were found at the follow-up. Conclusion: CAD/CAM technologies enable creation of implants of any size and configuration, and thereby, to increase the extent of bony resection and lower the risk of tumor progression. The procedure is performed in one step which decreases the risk of postoperative morbidity.

Modified orbitozygomatic craniotomy with a single burr hole in the alternative sphenoid ridge keyhole.

BACKGROUND: One-piece modified orbitozygomatic approach (OZA) is an extended version of the pterional approach that also includes orbital walls and frontal process of the zygomatic bone. For this craniotomy one burr hole must be placed in MacCarty keyhole and another - in the temporal region. OBJECTIVE: To develop a technique of the one-piece modified OZA with single a burr hole in the alternative sphenoid ridge keyhole that allows access to orbit, anterior cranial fossa and middle cranial fossa and apply it intraoperatively. METHODS: A single human head specimen was used. The dissection was performed using standard surgical instruments high-speed Stryker drill. Every stage of the approach was photographed. We also report a surgical case of a patient with orbital cavernous hemangioma that was resected using the described technique. RESULTS: The technique of the one-piece modified OZA with a single burr hole in the alternative sphenoid ridge keyhole is described, and its advantages and limitations are analyzed. The technique is used to totally resect an orbital cavernous hemangioma with good functional and cosmetic result. CONCLUSION: Modified OZA with a single burr hole in the sphenoid ridge keyhole is possible and may be an alternative to the classic technique. The advantages of this variation are the placement of just one burr hole and the preservation of a larger portion of the orbital roof. The latter facilitates better bone reconstruction and better cosmetic outcome. Disadvantages are the difficulty of identifying the location of the sphenoid ridge keyhole and risk of damaging the dura.

Predictive model for preoperative risk calculation of cerebrospinal fluid leak after resection of midline craniofacial mass lesions.

Background: Complex anterior skull base defects produced by resection of mass lesions vary in size and configuration and may be extensive. We analyzed the largest single-center series of midline craniofacial lesions extending intra- and extracranially. The study aims at the development of a predictive model for preoperative measurement of the risk of the postoperative cerebrospinal fluid (CSF) leak based on patients' characteristics and surgical plans. Methods: 166 male and 149 female patients with mean age 40,5 years (1 year and - 81 years) operated for benign and tumor-like midline craniofacial mass lesions were retrospectively analyzed using logistic regression method (Ridge regression algorithm was selected). The overall CSF leak rate was 9.6%. The ROSE algorithm and 'glmnet' software suite in R were used to overcome the cohort's disbalance and avoid overtraining the model. Results: The most influential modifiable negative predictor of the postoperative CSF leak was the use of extracranial and combined approaches. Use of transbasal approaches, gross total resection, utilization of one or two vascularized flaps for skull base reconstruction were the foremost modifiable predictors of a good outcome. Criterium of elevated risk was established at 50% with a specificity of the model as high as 0.83. Conclusions: The performed study has allowed for identifying the most significant predictors of postoperative CSF leak and developing an effective formula to estimate the risk of this complication using data known for each patient. We believe that the suggested web-based online calculator can be helpful for decision making support in off-pattern clinical situations.

Assessing the reliability of zygomatic bone landmarks as guides to reach the inferior orbital fissure in orbitozygomatic osteotomy: anatomical study of 83 human skulls.

To perform an adequate orbitozygomatic craniotomy, it is very important that the bone cut which passes through the body of the zygoma reaches the inferior orbital fissure (IOF). To reach the IOF, two surface landmarks on the body of the zygoma are described: a point located directly superior to the malar eminence and the zygomaticofacial foramen. The article explores the reliability of these landmarks and three other alternative points to reach the IOF. Eighty-three adult skulls were used in this study. The IOF dimensions and the relationship with the malar eminence, the point superior to the malar eminence, the zygomaticofacial foramen, and 3 alternative points (E, C, F) were analyzed. The malar eminence was unacceptable for use as a guide to the IOF. The point superior to the malar eminence was also unacceptable as a guide as only 9.4% and 10.9% were in the projection of the IOF on the right and left, respectively. 59.7% of the total zygomaticofacial foramina fell in the IOF projection. The point F fell in the projection of the IOF in 98.8% and 100.0% on the right and left, respectively. The use of the malar eminence as a guide to reach the IOF is unreliable in one third of cases as it is not easily identified intraoperatively in these cases. The zygomaticofacial foramen cannot be considered a reliable surgical landmark to reach the IOF. The authors recommend using a novel landmark which may be identified as a midpoint between intersections of the anterior and posterior margins of the zygomatic frontal process on a line extending from the inferior margin of the zygomatic arc. This point is reliable in 98.8-100% of cases.

Intraoral Endoscopic Ligation of Maxillary Artery in the Infratemporal Fossa.

Ligation of the sphenopalatine and posterior nasal arteries is indicated for posterior epistaxis as initial treatment or when conservative measures fail. In some patients, a transnasal approach or its alternative transantral approach are not possible due to tumor filling the nasal corridor, pterygopalatine fossa, or maxillary sinus. Aim of this study was to evaluate feasibility of endoscopically assisted transoral approach for the ligation of the maxillary artery (MA). Six fresh cadaver specimens (12 sides), previously prepared with intravascular injections of colored latex, were dissected. A combined transnasal and transoral approach exposed the MA from the deep belly of the temporalis muscle laterally to its terminal branches medially. Anatomical relationships of the MA with the deep belly of the temporalis muscle and the lower head of the lateral pterygoid muscle, and feasibility of access to the MA via a transoral approach were assessed. In all specimens, the MA was found at the point where horizontal fibers of the lower head of the lateral pterygoid muscle cross the vertical fibers of the deep belly of the temporalis muscle. In 5 specimens, the artery ran anteriorly and laterally to lower head of the lateral pterygoid muscle, and in 1 specimen, it ran posteriorly and medially to this muscle, diving between its fibers. The modified endoscopically assisted transoral approach is feasible to ligate the MA. It can be used for proximal vascular control in cases when transnasal and transantral approaches are not viable.

The Pedicled Buccal Fat Pad: Anatomical Study of the New Flap for Skull Base Defect Reconstruction After Endoscopic Endonasal Transpterygoid Surgery.

Objectives To evaluate the efficacy and safety of using a buccal fat pad for endoscopic skull base defect reconstruction. Design Descriptive anatomical study with an illustrative case presentation. Setting Anatomical study was performed on 12 fresh human cadaver specimens with injected arteries (24 sides). Internal carotid artery was exposed in the coronal plane via the endoscopic transpterygoid approach. The pedicled buccal fat pad was used for reconstruction. Participants: 12 human cadaver head specimens; one patient operated using the proposed technique. Main outcome measures: Proximity of the buccal fat pad flap to the defect, compliance of the flap, comfort and safety of harvesting procedure, and compatibility with the Hadad-Bassagasteguy nasoseptal flap. Results: Harvesting procedure was performed using anterior transmaxillary corridor. The pedicled buccal fat pad flap can be used to pack the sphenoid sinus or cover the internal carotid artery from cavernous to upper parapharyngeal segment. Conclusion The buccal fat pad can be safely harvested through the same approach without external incisions and is compliant enough to conform to the skull base defect. The proposed pedicled flap can replace free abdominal fat in central skull base reconstruction. The volume of the buccal fat pad allows obliteration of the sphenoid sinus or upper parapharyngeal space.