Plant-growth promoting activity of three fungal endophytes isolated from plants living in dehesas and their effect on Lolium multiflorum.

Endophytic fungi have been demonstrated to produce bioactive secondary metabolites, some of which promote plant growth. Three endophytic fungi isolated from healthy plants living in dehesas of Extremadura (Spain) were identified and evaluated for their ability to produce phytohormone-like substances, antioxidant activity, total polyphenol content, phosphate solubilization ability and siderophore and ammonia production. The filtrates and extracts produced by the three endophytes were applied to Lolium multiflorum seeds and seedlings under both in vitro and greenhouse conditions, to analyse their influence on plant growth traits such as germination, vigour index, chlorophyll data, number and length of leaves and roots, and dry weight. All three endophytes, which were identified as Fusarium avenaceum, Sarocladium terricola and Xylariaceae sp., increased the germination of L. multiflorum seeds by more than 70%. Shoot and root length, plant dry weight and the number of roots were positively affected by the application of fungal filtrates and/or extracts, compared with controls. The tentative HPLC-MS identification of phytohormone-like substances, such as gibberellin A2 and zeatin, or the antioxidant acetyl eugenol, may partially explain the mechanisms of L. multiflorum plant growth promotion after the application of fungal filtrates and/or extracts.

Cigarette smoke induces pulmonary arterial dysfunction through an imbalance in the redox status of the soluble guanylyl cyclase.

Chronic obstructive pulmonary disease (COPD), whose main risk factor is cigarette smoking (CS), is one of the most common diseases globally. Some COPD patients also develop pulmonary hypertension (PH), a severe complication that leads to premature death. Evidence suggests reactive oxygen species (ROS) involvement in COPD and PH, especially regarding pulmonary artery smooth muscle cells (PASMC) dysfunction. However, the effects of CS-driven oxidative stress on the pulmonary vasculature are not completely understood. Herein we provide evidence on the effects of CS extract (CSE) exposure on PASMC regarding ROS production, antioxidant response and its consequences on vascular tone dysregulation. Our results indicate that CSE exposure promotes mitochondrial fission, mitochondrial membrane depolarization and increased mitochondrial superoxide levels. However, this superoxide increase did not parallel a counterbalancing antioxidant response in human pulmonary artery (PA) cells. Interestingly, the mitochondrial superoxide scavenger mitoTEMPO reduced mitochondrial fission and membrane potential depolarization caused by CSE. As we have previously shown, CSE reduces PA vasoconstriction and vasodilation. In this respect, mitoTEMPO prevented the impaired nitric oxide-mediated vasodilation, while vasoconstriction remained reduced. Finally, we observed a CSE-driven downregulation of the Cyb5R3 enzyme, which prevents soluble guanylyl cyclase oxidation in PASMC. This might explain the CSE-mediated decrease in PA vasodilation. These results provide evidence that there might be a connection between mitochondrial ROS and altered vasodilation responses in PH secondary to COPD, and strongly support the potential of antioxidant strategies specifically targeting mitochondria as a new therapy for these diseases.

Ecology of the collapse of Rapa Nui society.

Collapses of food producer societies are recurrent events in prehistory and have triggered a growing concern for identifying the underlying causes of convergences/divergences across cultures around the world. One of the most studied and used as a paradigmatic case is the population collapse of the Rapa Nui society. Here, we test different hypotheses about it by developing explicit population dynamic models that integrate feedbacks between climatic, demographic and ecological factors that underpinned the socio-cultural trajectory of these people. We evaluate our model outputs against a reconstruction of past population size based on archaeological radiocarbon dates from the island. The resulting estimated demographic declines of the Rapa Nui people are linked to the long-term effects of climate change on the island's carrying capacity and, in turn, on the 'per-capita food supply'.

Chemometric characterization of the trace element profile of raw meat from Rubia Gallega x Holstein Friesian calves from an intensive system.

This study was conducted to compare the essential and toxic element content of seven veal cuts: shoulder clod (SC), inside round (IR), eye of round (ER), bottom round (BR), heel of round (HR), knuckle (KK) and tenderloin (TL). Eighty-four meat samples were determined by ICP-MS. Overall, essential trace elements (Co, Cu, Fe, Mn and Zn), except Se, varied significantly between the different meat cuts. By contrast, there were no significant variations for the minor trace elements (Cr, Mo and Ni) or the toxic elements (As, Cd and Pb). Chemometric analysis of the data identified four clusters: (1) the main trace elements, except (2) Se, which was closely related to (3) the toxic elements, and finally (4) the minor trace elements. TL and ER cuts constituted two separated groups; most of the SC and KK samples were associated, and IR and BR samples overlapped. TL and SC contained the highest amounts of trace elements, whereas ER and KK the lowest.

Graphene and carbon nanotubes as solid phase extraction sorbents for the speciation of chromium: A review.

In the last decades, the extensive use of chromium in industrial activities has led to the discharge of different chromium species into the biosphere. The two stable chromium forms are Cr(III) and Cr(VI), which have dramatically different properties. While the first one is essential, the second is harmful and carcinogenic, even at very low concentration. Therefore, the appropriate analysis of chromium in environmental, biological, food and other kind of samples need a reliable separation and subsequent quantification of both Cr species. The present paper provides a critical review of chromium speciation methods in which solid phase extraction was employed as sample pretreatment using graphene and carbon nanotubes (and their diverse oxidized, functionalized and magnetic derivatives) as sorbents. The different published methods for the speciation of Cr(III), Cr(VI) or both species are described and classified on the basis of the separation strategy employed: (i) the selective retention of only one of the two species by the sorbent, (ii) the retention of a Cr-chelate formed by using a ligand selective for only one of the Cr-species, or (iii) the sorption of both Cr(III) and Cr(VI) species. In addition, the distinct applied SPE modes (on-column, dispersive or magnetic) and their automation possibilities, the analytical techniques utilized for measurement of the Cr-species after separation, as well as the analytical figures of merit of the methods developed up to date are evaluated. Finally, the expected future trends of solid phase extraction for Cr speciation based on carbon nanomaterials such as graphene, carbon nanotubes and their derivatives as sorbents are commented.

Chemometric authentication of the organic status of milk on the basis of trace element content.

The objective of this study was to develop a method for authenticating organic milk samples in North Spain on the basis of its trace mineral composition. Fourteen elements in 98 samples were determined by inductively coupled plasma mass spectrometry. Although concentrations of Co, Cr, Cu, I, Se and Zn where statistically higher in conventional milk and As in organic, none of these elements by itself was able to discriminate between organic and conventional milk. The chemical data was examined by principal component analysis and cluster analysis, revealing a natural separation between organic and conventional milk. In a second step, several supervised pattern recognition techniques were used to construct mathematical models for predicting the type of milk (organic or conventional) based on the metal content. The results proved that the model constructed using the artificial neural network is capable of correctly identifying the type of milk in almost 95% of cases.

Evaluation of trace element status of organic dairy cattle.

The present study aimed to evaluate trace mineral status of organic dairy herds in northern Spain and the sources of minerals in different types of feed. Blood samples from organic and conventional dairy cattle and feed samples from the respective farms were analysed by inductively coupled plasma mass spectrometry to determine the concentrations of the essential trace elements (cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), iodine (I), manganese (Mn), molybdenum (Mo), nickel (Ni), selenium (Se) and zinc (Zn)) and toxic trace elements (arsenic (As), cadmium (Cd), mercury (Hg) and lead (Pb)). Overall, no differences between organic and conventional farms were detected in serum concentrations of essential and toxic trace elements (except for higher concentrations of Cd on the organic farms), although a high level of inter-farm variation was detected in the organic systems, indicating that organic production greatly depends on the specific local conditions. The dietary concentrations of the essential trace elements I, Cu, Se and Zn were significantly higher in the conventional than in the organic systems, which can be attributed to the high concentration of these minerals in the concentrate feed. No differences in the concentrations of trace minerals were found in the other types of feed. Multivariate chemometric analysis was conducted to determine the contribution of different feed sources to the trace element status of the cattle. Concentrate samples were mainly associated with Co, Cu, I, Se and Zn (i.e. with the elements supplemented in this type of feed). However, pasture and grass silage were associated with soil-derived elements (As, Cr, Fe and Pb) which cattle may thus ingest during grazing.

[Environmental-analytical risk factors influence on the phenotype of amyotrophic lateral sclerosis in a rural setting]. / Influencia de los factores ambientales-analiticos sobre el fenotipo de esclerosis lateral amiotrofica en un medio rural.

INTRODUCTION: There are discrepancies in the different studies that attempt to correlate the risk factors of developing amyotrophic lateral sclerosis (ALS) and the impact on their prognosis. Some of these factors are intrinsic to the rural livelihood. Therefore, we propose to study if any of these influence the onset and/or prognosis of the disease in the health region of Lleida, a predominantly rural area. PATIENTS AND METHODS: Variables related to general factors, clinical, environmental and laboratory were collected and analyzed at the time of diagnosis of ALS in 38 patients and were retrospectively related to the onset of the disease and its survival. RESULTS: The family history of ALS (p < 0.02) and elevated CK (p < 0.0001) were associated with increased survival. Smoking (p < 0.04), physical work (p < 0.03), low creatinine (p < 0.03), elevated CK (p = 0.0005) were associated with an early onset of the disease. The bulbar onset form was significantly related to a late onset of the disease (p < 0,01). Total cholesterol and PCR did not influence the onset or course of ALS. There is a non-significant trend at statistical level in favor of moderate physical exercise being associated with a later onset, while intense exercise at an early onset of ALS. CONCLUSIONS: The results suggest that there are a number of factors that influence the development and prognosis of ALS, some of which are more prevalent in rural areas, such as physical work.

TITLE: Influencia de los factores ambientales-analiticos sobre el fenotipo de esclerosis lateral amiotrofica en un medio rural.Introduccion. Existen discrepancias en los diversos estudios que intentan correlacionar los factores de riesgo de desarrollar esclerosis lateral amiotrofica (ELA) y el impacto en su pronostico. Algunos de dichos factores son intrinsecos al medio de vida rural. Por ello, proponemos estudiar si alguno de estos influye sobre el inicio o el pronostico de la enfermedad en la region sanitaria de Lleida, un ambito predominantemente rural. Pacientes y metodos. Se recogieron y analizaron variables relacionadas con factores generales, clinicos, ambientales y de laboratorio en el momento del diagnostico de ELA en 38 pacientes, y se relacionaron retrospectivamente con el inicio de la enfermedad y su supervivencia. Resultados. Los antecedentes familiares de ELA (p < 0,02) y la creatincinasa elevada (p < 0,0001) se asociaron a mayor supervivencia. El tabaquismo (p < 0,04), el trabajo fisico (p < 0,03), la creatinina baja (p < 0,03) y la creatincinasa elevada (p = 0,0005) se asociaron a un inicio precoz de la enfermedad de modo estadisticamente significativo. La forma de inicio bulbar se relaciono significativamente con un inicio tardio de la enfermedad (p < 0,01). El colesterol total y la proteina C reactiva no influyeron en el inicio ni en el curso de la ELA en nuestra muestra. Existe una tendencia estadisticamente no significativa a favor de que el ejercicio fisico moderado se asocia con un inicio mas tardio, mientras que el ejercicio intenso se asocia con un inicio precoz de la ELA. Conclusiones. Los resultados apuntan a que existe una serie de factores que influye en el desarrollo y pronostico de la ELA, y alguno de estos es mas prevalente en el ambito rural, como el trabajo fisico.

Identifying sources of metal exposure in organic and conventional dairy farming.

In humans the main route of exposure to toxic metals is through the diet, and there is therefore a clear need for this source of contamination to be minimized, particularly in food of animal origin. For this purpose, the various sources of toxic metals in livestock farming (which vary depending on the production system) must be taken into account. The objectives of the present study were to establish the profile of metal exposure in dairy cattle in Spain and to determine, by chemometric (multivariate statistical) analysis, any differences between organic and conventional systems. Blood samples from 522 cows (341 from organic farms and 181 from conventional farms) were analysed by inductively coupled plasma mass spectrometry to determine the concentrations of 14 elements: As, Cd, Co, Cr, Cu, Fe, Hg, I, Mn, Mo, Ni, Pb, Se and Zn. In conventional systems the generally high and balanced trace element concentrations in the mineral-supplemented concentrate feed strongly determined the metal status of the cattle. However, in organic systems, soil ingestion was an important contributing factor. Our results demonstrate that general information about the effects of mineral supplementation in conventional farming cannot be directly extrapolated to organic farming and special attention should be given to the contribution of ingestion of soil during grazing and/or ingestion of soil contaminated forage.

Magnetic solid-phase extraction using carbon nanotubes as sorbents: a review.

Magnetic solid-phase extraction (M-SPE) is a procedure based on the use of magnetic sorbents for the separation and preconcentration of different organic and inorganic analytes from large sample volumes. The magnetic sorbent is added to the sample solution and the target analyte is adsorbed onto the surface of the magnetic sorbent particles (M-SPs). Analyte-M-SPs are separated from the sample solution by applying an external magnetic field and, after elution with the appropriate solvent, the recovered analyte is analyzed. This approach has several advantages over traditional solid phase extraction as it avoids time-consuming and tedious on-column SPE procedures and it provides a rapid and simple analyte separation that avoids the need for centrifugation or filtration steps. As a consequence, in the past few years a great deal of research has been focused on M-SPE, including the development of new sorbents and novel automation strategies. In recent years, the use of magnetic carbon nanotubes (M-CNTs) as a sorption substrate in M-SPE has become an active area of research. These materials have exceptional mechanical, electrical, optical and magnetic properties and they also have an extremely large surface area and varied possibilities for functionalization. This review covers the synthesis of M-CNTs and the different approaches for the use of these compounds in M-SPE. The performance, general characteristics and applications of M-SPE based on magnetic carbon nanotubes for organic and inorganic analysis have been evaluated on the basis of more than 110 references. Finally, some important challenges with respect the use of magnetic carbon nanotubes in M-SPE are discussed.

Characterization of carbon nanotubes and analytical methods for their determination in environmental and biological samples: a review.

In the present paper, a critical overview of the most commonly used techniques for the characterization and the determination of carbon nanotubes (CNTs) is given on the basis of 170 references (2000-2014). The analytical techniques used for CNT characterization (including microscopic and diffraction, spectroscopic, thermal and separation techniques) are classified, described, and illustrated with applied examples. Furthermore, the performance of sampling procedures as well as the available methods for the determination of CNTs in real biological and environmental samples are reviewed and discussed according to their analytical characteristics. In addition, future trends and perspectives in this field of work are critically presented.

Solid phase extraction for the speciation and preconcentration of inorganic selenium in water samples: a review.

Selenium is an essential element for the normal cellular function of living organisms. However, selenium is toxic at concentrations of only three to five times higher than the essential concentration. The inorganic forms (mainly selenite and selenate) present in environmental water generally exhibit higher toxicity (up to 40 times) than organic forms. Therefore, the determination of low levels of different inorganic selenium species in water is an analytical challenge. Solid-phase extraction has been used as a separation and/or preconcentration technique prior to the determination of selenium species due to the need for accurate measurements for Se species in water at extremely low levels. The present paper provides a critical review of the published methods for inorganic selenium speciation in water samples using solid phase extraction as a preconcentration procedure. On the basis of more than 75 references, the different speciation strategies used for this task have been highlighted and classified. The solid-phase extraction sorbents and the performance and analytical characteristics of the developed methods for Se speciation are also discussed.

A fast chemometric procedure based on NIR data for authentication of honey with protected geographical indication.

In this work, information contained in near infrared (NIR) spectra of honeys with protected geographical indication (PGI) "Mel de Galicia" was processed by means of different chemometric techniques to develop an authentication system for this high quality food product. Honey spectra were obtained in a fast and single way, and they were pretreated by means of standard normal variate transformation in order to remove the influence of particle size, scattering and other factors, and prior to their use as input data. As the first step in chemometric study, display techniques such as principal component analysis and cluster analysis were applied in order to demonstrate that the NIR data contained useful information to develop a pattern recognition classification system to authenticate honeys with PGI. The second step consisted in the application of different pattern recognition techniques (such as D-PLS: Discriminant partial least squares regression; SIMCA: Soft independent modelling of class analogy; KNN: K-nearest neighbours; and MLF-NN: Multilayer feedforward neural networks) to derive diverse models for PGI-honey class with the objective of detecting possible falsification of these high-quality honeys. Amongst all the classification chemometric procedures, SIMCA achieved to be the best PGI-model with 93.3% of sensitivity and 100% of specificity. Therefore, the combination of NIR information data with SIMCA developed a single and fast method in order to differentiate between genuine PGI-Galician honey samples and other commercial honey samples from other origins that, due to their lower price, could be used as substrates for falsification of genuine PGI ones.

Carbon nanotubes as solid-phase extraction sorbents prior to atomic spectrometric determination of metal species: a review.

New materials have significant impact on the development of new methods and instrumentation for chemical analysis. From the discovery of carbon nanotubes in 1991, single and multi-walled carbon nanotubes--due to their high adsorption and desorption capacities--have been employed as sorption substrates in solid-phase extraction for the preconcentration of metal species from diverse matrices. Looking for successive improvements in sensitivity and selectivity, in the past few years, carbon nanotubes have been utilized as sorbents for solid phase extraction in three different ways: like as-grown, oxidized and functionalized nanotubes. In the present paper, an overview of the recent trends in the use of carbon nanotubes for solid phase extraction of metal species in environmental, biological and food samples is presented. The determination procedures involved the adsorption of metals on the nanotube surface, their quantitative desorption and subsequent measurement by means of atomic spectrometric techniques such as flame atomic absorption spectrometry, electrothermal atomic absorption spectrometry or inductively coupled plasma atomic emission spectrometry/mass spectrometry, among others. Synthesis, purification and types of carbon nanotubes, as well as the diverse chemical and physical strategies for their functionalization are described. Based on 140 references, the performance and general properties of the applications of solid phase extraction based on carbon nanotubes for metal species atomic spectrometric determination are discussed.

Dialysis outcomes in Colombia (DOC) study: a comparison of patient survival on peritoneal dialysis vs hemodialysis in Colombia.

The goal of the Dialysis Outcomes in Colombia (DOC) study was to compare the survival of patients on hemodialysis (HD) vs peritoneal dialysis (PD) in a network of renal units in Colombia. The DOC study examined a historical cohort of incident patients starting dialysis therapy between 1 January 2001 and 1 December 2003 and followed until 1 December 2005, measuring demographic, socioeconomic, and clinical variables. Only patients older than 18 years were included. As-treated and intention-to-treat statistical analyses were performed using the Kaplan-Meier method and Cox proportional hazard model. There were 1094 eligible patients in total and 923 were actually enrolled: 47.3% started HD therapy and 52.7% started PD therapy. Of the patients studied, 751 (81.3%) remained in their initial therapy until the end of the follow-up period, death, or censorship. Age, sex, weight, height, body mass index, creatinine, calcium, and Subjective Global Assessment (SGA) variables did not show statistically significant differences between the two treatment groups. Diabetes, socioeconomic level, educational level, phosphorus, Charlson Co-morbidity Index, and cardiovascular history did show a difference, and were less favorable for patients on PD. Residual renal function was greater for PD patients. Also, there were differences in the median survival time between groups: 27.2 months for PD vs 23.1 months for HD (P=0.001) by the intention-to-treat approach; and 24.5 months for PD vs 16.7 months for HD (P<0.001) by the as-treated approach. When performing univariate Cox analyses using the intention-to-treat approach, associations were with age > or =65 years (hazard ratio (HR)=2.21; confidence interval (CI) 95% (1.77-2.755); P<0.001); history of cardiovascular disease (HR=1.96; CI 95% (1.58-2.90); P<0.001); diabetes (HR=2.34; CI 95% (1.88-2.90); P<0.001); and SGA (mild or moderate-severe malnutrition) (HR=1.47; CI 95% (1.17-1.79); P=0.001); but no association was found with gender (HR=1.03, CI 95% 0.83-1.27; P=0.786). Similar results were found with the as-treated approach, with additional associations found with Charlson Index (0-2) (HR=0.29; Cl 95% (0.22-0.38); P<0.001); Charlson Index (3-4) (HR=0.61; Cl 95% (0.48-0.79); P<0.001); and SGA (mild-severe malnutrition) (HR=1.43; Cl 95% (1.15-1.77); P<0.001). Similarly, the multivariate Cox model was run with the variables that had shown association in previous analyses, and it was found that the variables explaining the survival of patients with end-stage renal disease in our study were age, SGA, Charlson Comorbidity Index 5 and above, diabetes, healthcare regimes I and II, and socioeconomic level 2. The results of Cox proportional risk model in both the as-treated and intention-to-treat analyses showed that there were no statistically significant differences in survival of PD and HD patients: intention-to-treat HD/PD (HR 1.127; CI 95%: 0.855-1.484) and as-treated HD/PD (HR 1.231; CI 95%: 0.976-1.553). In this historical cohort of incident patients, there was a trend, although not statistically significant, for a higher (12.7%) adjusted mortality risk associated with HD when compared to PD, even though the PD patients were poorer, were more likely to be diabetic, and had higher co-morbidity scores than the HD patients. The variables that most influenced survival were age, diabetes, comorbidity, healthcare regime, socioeconomic level, nutrition, and education.

Determination of Cr and Ni in Orujo spirit samples by ETAAS using different chemical modifiers.

Several analytical methods are proposed for chromium and nickel determination in Orujo spirit samples using ETAAS. Permanent chemical modifiers such as W, Ir, Ru, W-Ir and W-Ru were comparatively studied in relation to the common chemical modifier employed, Pd(NO3)2-Mg(NO3)2. Taking into account the analytical performance, the method based on the use of Ru as a permanent modifier was selected for further direct Cr determinations in Orujo samples. In the case of Ni, after comparison among the different methods developed, a method with no modifier which allows the direct interpolation in calibration graphs was chosen. Detection limits of 0.13µgL(-1) and 0.30µgL(-1) were obtained for Cr and Ni, respectively. For all methods developed, recoveries (ranged 98.6-102%) and precision (RSD<10%) were acceptable. The selected methods were applied for the determination of the Cr and Ni contents in 80 representative Orujo Galician samples. The Cr concentrations ranged from

Direct determination of cadmium in Orujo spirit samples by electrothermal atomic absorption spectrometry: comparative study of different chemical modifiers.

In this work, several analytical methods are proposed for cadmium determination in Orujo spirit samples using electrothermal atomic absorption spectrometry (ETAAS). Permanent chemical modifiers thermally coated on the platforms inserted in pyrolytic graphite tubes (such as W, Ir, Ru, W-Ir and W-Ru) were comparatively studied in relation to common chemical modifier mixtures [Pd-Mg(NO3)2 and (NH4)H2PO4-Mg(NO3)2] for cadmium stabilization. Different ETAAS Cd determination methods based on the indicated modifiers have been developed. In each case, pyrolysis and atomization temperatures, atomization shapes, characteristic masses and detection limits as well as other analytical characteristics have been determined. All the assayed modifiers (permanent and conventional) were capable of achieving the appropriate stabilization of the analyte, with the exception of Ru and W-Ru. Moreover, for all developed methods, recoveries (99-102%) and precision (R.S.D. lower than 10%) were acceptable. Taking into account the analytical performance (best detection limit LOD = 0.01 microg L(-1)), the ETAAS method based on the use of W as a permanent modifier was selected for further direct Cd determinations in Orujo samples from Galicia (NW Spain). The chosen method was applied in the determination of the Cd content in 38 representative Galician samples. The cadmium concentrations ranged

Direct and combined methods for the determination of chromium, copper, and nickel in honey by electrothermal atomic absorption spectroscopy.

In the present work, direct methods for the determination of chromium, copper, and nickel in honey by electrothermal atomic absorption spectroscopy were developed using experimental design as an optimization tool. Once the optimum conditions for the individual methods were established, a direct method for the combined determination of the three elements was optimized using the response surface tool. Palladium was used as chemical modifier in all cases. Honey was diluted in water, hydrogen peroxide, and nitric acid. Triton X-100 was added to minimize the matrix effect and the viscosity of the sample. The RSD (better than 10%) and the analytical recovery (98-103%) were acceptable for all of the developed methods. Calibration graphs were used in the four methods to determine the concentration of the analytes in the sample. The detection limits of the combined method (0.21, 0.35, and 0.37 microg L(-)(1) for Cr, Cu, and Ni, respectively) were similar to those obtained for the individual methods (LOD = 0.17, 0.21, 0.33 microg L(-)(1) for Cr, Cu, and Ni, respectively). The direct-combined proposed method has been applied to the determination of chromium, copper, and nickel content in representative honey samples from Galicia (northwestern Spain). The concentrations found in the analyzed samples were in the range of (5.75 +/- 0.64)-(26.4 +/- 0.38) ng g(-)(1) of Cr, (79 +/- 7.8)-(2049 +/- 80) ng g(-)(1) of Cu, and (12.6 +/- 1.36)-(172 +/- 6.88) ng g(-)(1) of Ni.

Characterisation of invasive pneumococcal isolates in Catalan children up to 5 years of age, 1989-2000.

Ninety-six Streptococcus pneumoniae strains isolated between January 1989 and December 2000 from usually sterile sites of children aged < 5 years of age were included in the study. Resistance to penicillin (38.6% intermediate, 10.4% high-level), cefotaxime (20.8%), tetracycline (41.7%), chloramphenicol (33.3%) and erythromycin (27.1%), as well as serogroup/type, were related to age and pathology. Strains from children aged < 2 years showed the highest penicillin resistance rate. Resistance to penicillin, tetracycline, chloramphenicol and erythromycin was the most common pattern (18.8% of strains). Most isolates (80.2%) belonged to serogroups/types included in the heptavalent conjugate vaccine.

Comparison of palladium-magnesium nitrate and ammonium dihydrogenphosphate modifiers for cadmium determination in honey samples by electrothermal atomic absorption spectrometry.

The occurrence of certain trace elements, such as cadmium, in honey bee can be considered as an indication of environmental pollution. In the present work, two methods for Cd determination in honey by electrothermal atomic absorption spectrometry, using palladium-magnesium nitrate and ammonium dihydrogenphosphate as chemical modifiers, have been developed. In none of these cases honey samples required pretreatment. Honey was diluted in water (20% w/v), and hydrogen peroxide, nitric acid, and Triton X-100 were added to minimize the matrix effect. For the first method, 21.6 microg of palladium and 4.5 microg of magnesium were added as chemical modifier; for the second method, 60 microg of ammonium dihydrogenphosphate were employed. The limits of detection obtained were 0.32 ng g(-1) for ammonium dihydrogenphosphate method and 0.54 ng g(-1) for palladium-magnesium nitrate method. The characteristic mass was 0.7 and 1.0 pg for ammonium dihydrogenphosphate and palladium-magnesium nitrate methods, respectively. The relative standard deviation (<10%) and the analytical recovery (98-105%) were comparable in both methods. The optimised methods were applied to the determination of the cadmium content in unpolluted Galician honey samples. Cd has been detected the analysed samples in the range (n.d.-4.3 ng g(-1)).