Bioinspired Nanofeatured Substrates: Suitable Environment for Bone Regeneration.

Bone mimicking coatings provide a complex microenvironment in which material, through its inherent properties (such as nanostructure and composition), affects the commitment of stem cells into bone lineage and the production of bone tissue regulating factors required for bone healing and regeneration. Herein, a bioactive mineral/biopolymer composite made of calcium phosphate/chitosan and hyaluronic acid (CaP-CHI-HA) was elaborated using a versatile simultaneous spray coating of interacting species. The resulting CaP-CHI-HA coating was mainly constituted of bioactive, carbonated and crystalline hydroxyapatite with 277 ± 98 nm of roughness, 1 µm of thickness, and 2.3 ± 1 GPa of stiffness. After five days of culture, CaP-CHI-HA suggested a synergistic effect of intrinsic biophysical features and biopolymers on stem cell mechanobiology and nuclear organization, leading to the expression of an early osteoblast-like phenotype and the production of bone tissue regulating factors such as osteoprotegerin and vascular endothelial growth factor. More interestingly, amalgamation with biopolymers conferred to the mineral a bacterial antiadhesive property. These significant data shed light on the potential regenerative application of CaP-CHI-HA bioinspired coating in providing a suitable environment for stem cell bone regeneration and an ideal strategy to prevent implant-associated infections.

Harnessing Wharton's jelly stem cell differentiation into bone-like nodule on calcium phosphate substrate without osteoinductive factors.

An important aim of bone regenerative medicine is to design biomaterials with controlled chemical and topographical features to guide stem cell fate towards osteoblasts without addition of specific osteogenic factors. Herein, we find that sprayed bioactive and biocompatible calcium phosphate substrates (CaP) with controlled topography induce, in a well-orchestrated manner, Wharton's jelly stem cells (WJ-SCs) differentiation into osteoblastic lineage without any osteogenic supplements. The resulting WJ-SCs commitment exhibits features of native bone, through the formation of three-dimensional bone-like nodule with osteocyte-like cells embedded into a mineralized type I collagen. To our knowledge, these results present the first observation of a whole differentiation process from stem cell to osteocytes-like on a synthetic material. This suggests a great potential of sprayed CaP and WJ-SCs in bone tissue engineering. These unique features may facilitate the transition from bench to bedside and the development of successful engineered bone. STATEMENT OF SIGNIFICANCE: Designing materials to direct stem cell fate has a relevant impact on stem cell biology and provides insights facilitating their clinical application in regenerative medicine. Inspired by natural bone compositions, a friendly automated spray-assisted system was used to build calcium phosphate substrate (CaP). Sprayed biomimetic solutions using mild conditions led to the formation of CaP with controlled physical properties, good bioactivity and biocompatibility. Herein, we show that via optimization of physical properties, CaP substrate induce osteogenic differentiation of Wharton's jelly stem cells (WJ-SCs) without adding osteogenic supplement factors. These results suggest a great potential of sprayed CaP and WJ-SCs in bone tissue engineering and may facilitate the transition from bench to beside and the development of clinically successful engineered bone.

Gene screening of Wharton's jelly derived stem cells.

Stem cells are the most powerful candidate for the treatment of various diseases. Suitable stem cell source should be harvested with minimal invasive procedure, found in great quantity, and transplanted with no risk of immune response and tumor formation. Fetal derived stem cells have been introduced as an excellent alternative to adult and embryonic stem cells use, but unfortunately, their degree of "stemness" and molecular characterization is still unclear. Several studies have been performed deciphering whether fetal stem cells meet the needs of regenerative medicine. We believe that a transcriptomic screening of Wharton's jelly stem cells will bring insights on cell population features.

Chitosan/hydroxyapatite hybrid scaffold for bone tissue engineering.

BACKGROUND: To favor regeneration following critical bone defect, a combination of autologous bone graft and biomaterials is currently used. Major drawbacks of such techniques remain the availability of the autologous material and the second surgical site, inducing pain and morbidity. OBJECTIVE: Our aim was to investigate the biocompatibility in vitro of three dimensions hybrid biodegradable scaffolds combining osteoconductive properties of hydroxyapatite and anti-inflammatory properties of chitosan. METHODS: Hybrid scaffolds were characterized by microscopic observations, equilibrium swelling ratio and overtime weight loss measurements. In vitro studies were performed using primary human bone cells cultured for 7, 14 and 21 days. Cell viability, proliferation, morphology and differentiation through alkaline phosphatase (ALP) activity measurement were assessed. RESULTS: Characterization of our scaffolds demonstrated porous, hydrophilic and biodegradable characteristics. In vitro studies showed that these scaffolds have induced slight decrease in cell death and proliferation comparing to the culture plastic substrate control condition, as well as increased short term osteoinductive properties. CONCLUSIONS: In this study, we have provided evidence that our hybrid hydroxyapatite/chitosan scaffolds could be suitable for bone filling.

Infusion of docosahexaenoic acid protects against myocardial infarction.

Most of the cardioprotective effects of long-chain omega 3 fatty acids, namely docosahexaenoic (DHA; 22:6n-3) and eicosapentaenoic (EPA; 20:5n-3), are due to their hypotriglyceridemic and anti-inflammatory effects, which lower the risk for cardiovascular disease and myocardial infarction. Little is known on the direct preventive activities of DHA and EPA on heart function. In isolated hearts, we studied (1) whether infused DHA is able to protect the heart from ischemia/reperfusion damage and (2) the role played by Notch-mediated signal transduction pathways in myocardial infarction. Perfusion with DHA before and before/after induction of ischemia reperfusion significantly diminished cardiac damage and afforded antioxidant protection. Mechanistically, infusion of DHA before and before/after the induction of ischemia differentially modulated the expression of Notch2 and 3 target genes. In particular, DHA increased the expression of Hey1 when infused pre- and pre/post-ischemia; Jagged 1 and the Notch2 receptors increased with DHA pre-ischemia, but not pre/post; Notch2 and 3 receptors as well as Delta increased following DHA administration pre- and (especially) pre/post-ischemia. In conclusion, while the precise nature of the Notch-mediated protection from ischemia/reperfusion afforded by DHA is as yet to be fully elucidated, our data add to the growing body of literature that indicates how systemic administration of DHA provides cardiovascular protection.

Soft tissue adhesion of polished versus glazed lithium disilicate ceramic for dental applications.

OBJECTIVE: Ceramics are widely used materials for prosthesis, especially in dental fields. Despite multiple biomedical applications, little is known about ceramic surface modifications and the resulting cell behavior at its contact. The aim of this study is to evaluate the biological response of polished versus glazed surface treatments on lithium disilicate dental ceramic. METHODS: We studied a lithium disilicate ceramic (IPS e.max(®) Press, Ivoclar Vivadent) with 3 different surface treatments: raw surface treatment, hand polished surface treatment, and glazed surface treatment (control samples are Thermanox(®), Nunc). In order to evaluate the possible modulation of cell response at the surface of ceramic, we compared polished versus glazed ceramics using an organotypic culture model of chicken epithelium. RESULTS: Our results show that the surface roughness is not modified as demonstrated by equivalent Ra measurements. On the contrary, the contact angle θ in water is very different between polished (84°) and glazed (33°) samples. The culture of epithelial tissues allowed a very precise assessment of histocompatibility of these interfaces and showed that polished samples increased cell adhesion and proliferation as compared to glazed samples. SIGNIFICANCE: Lithium disilicate polished ceramic provided better adhesion and proliferation than lithium disilicate glazed ceramic. Taken together, our results demonstrate for the first time, how it is possible to use simple surface modifications to finely modulate the adhesion of tissues. Our results will help dental surgeons to choose the most appropriate surface treatment for a specific clinical application, in particular for the ceramic implant collar.

Effect of strontium-substituted biphasic calcium phosphate on inflammatory mediators production by human monocytes.

Calcium phosphate materials are widely used as bone substitutes because of their properties close to those of the mineral phase of bones. Nevertheless, after several months, calcium phosphate-based materials release particles that may be phagocytosed by monocytes, leading to an inflammatory reaction. Strontium is well known to counteract the osteoporosis process, but little is known about its effect on inflammatory processes. The purpose of this work was to study the effect of biphasic calcium phosphate (BCP) particles substituted with strontium on the inflammatory reaction. Human primary monocytes stimulated or not by lipopolysaccharide (LPS) were exposed to BCP particles containing strontium for 6 and 24 h. Inflammatory mediators (cytokines and matrix metalloproteinases (MMPs)) production was then quantified by ELISA and zymography. We observed that the presence of strontium had few effects on unstimulated cells, but it decreased the production of pro-inflammatory cytokines and the chemokine interleukin 8 in LPS-stimulated cell-conditioned medium. This work suggests for the first time that strontium may be involved in the control of inflammatory processes following BCP phagocytosis by human monocytes.

In vitro dissolution and corrosion study of calcium phosphate coatings elaborated by pulsed electrodeposition current on Ti6Al4V substrate.

Calcium-deficient hydroxyapatite (Ca-def-HAP) coatings on titanium alloy (Ti6Al4V) substrates are elaborated by pulsed electrodeposition. In vitro dissolution/precipitation process is investigated by immersion of the coated substrate into Dulbecco's Modified Eagle Medium (DMEM) from 1 h to 28 days. Calcium and phosphorus concentrations evolution in the biological liquid are determined by Induced Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES) for each immersion time. Physical and chemical characterizations of the coating are performed by scanning electron microscopy (SEM) associated to Energy Dispersive X-ray Spectroscopy (EDXS) for X-ray microanalysis. Surface modifications are investigated by an original method based on the three-dimensional reconstruction of SEM images (3D-SEM). Moreover, corrosion measurements are carried out by potentiodynamic polarization experiments. The results show that the precipitation rate of the Ca-def HAP coating is more pronounced in comparison with that of stoichiometric hydroxyapatite (HAP) used as reference. The precipitated bone-like apatite coating is thick, homogenous and exhibits an improved link to the substrate. Consequently, the corrosion behaviour of the elaborated prosthetic material is improved.

An in vitro biological and anti-bacterial study on a sol-gel derived silver-incorporated bioglass system.

OBJECTIVES: The purpose of this study was to evaluate the in vitro antibacterial and biological activity of silver-incorporated bioactive glass system SiO2-CaO-P2O5-Ag2O (AgBG). The bacteriostatic and bactericidal properties of this new quaternary glass system along with the ternary sol-gel glass system SiO2-CaO-P2O5 (BG) have been studied using Escherichia coli as a test micro-organism. The AGBG system thus appears to be a promising material for dental applications, since similar effects might be produced on a film of bacteria and mucous that grows on the teeth. METHODS: The SiO2-CaO-P2O5-Ag2O and SiO2-CaO-P2O5 glass systems were synthesized by the sol-gel technique and characterized for their physicho-chemical properties. The antibacterial activity and biological properties were evaluated by determining the minimum inhibitory concentrations (MICs). Release of Ag+ into the culture medium was measured by inductively coupled plasma (ICP) analysis. RESULTS: The in vitro antibacterial action of the SiO2-CaO-P2O5-Ag2O was compared with that of its ternary counterpart glass system. The concentrations of Ag-bioglass, in the range of 0.02-0.20 mg of Ag-bioglass per millilitre of culture medium, were found to inhibit the growth of these bacteria. The Ag-bioglass not only acts bacteriostatically but it also elicited a rapid bactericidal action. A complete bactericidal effect was elicited in the early stages of the incubation at Ag-bioglass concentration of 20 mg/ml and the ternary glass system had no effect on bacterial growth or viability. The antibacterial action of Ag-bioglass was exclusively attributed to the leaching of Ag+ ions from the glass matrix. SIGNIFICANCE: One of the major advantages of incorporating silver ions into a gel glass system is that the porous glass matrix can allow for controlled sustained delivery of the antibacterial agent to dental material, used even under anaerobic conditions such as deep in the periodontal pocket. This glass system also provides long-term action required for systems which are constantly at risk of microbial contamination.

Interfacial reactions of glasses for biomedical application by scanning transmission electron microscopy and microanalysis.

Short-term physico-chemical reactions at the interface between bioactive glass particles and biological fluids are studied for three glasses with different bioactive properties; these glasses are in the SiO(2)-Na(2)O-CaO-P(2)O(5)-K(2)O-Al(2)O(3)-MgO system. Our aim is to show the difference between the mechanisms of their surface reactions. The relation between the composition and the bioactive properties of these glasses is also discussed. The elemental analysis is performed at the submicrometer scale by scanning transmission electron microscopy associated with energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy. After different immersion times (ranging from 0 to 96 h) of bioactive glass particles in a simulated biological solution, results show the formation of different surface layers at the glass periphery in the case of two bioactive glasses (A9 and BVA). For the third glass (BVH) we do not observe any surface layer formation or any modification of the glass composition. For the two other glasses (A9 and BVA), we observe the presence of different layers: an already observed (Si, O, Al) rich layer at the periphery, a previously demonstrated thin (Si, O) layer formed on top of the (Si, O, Al) layer and a (Ca, P) layer. We determine the different steps of the mechanisms of the surface reactions, which appear to be similar in these glasses, and compare the physico-chemical reactions and kinetics using the different immersion times. The A9 glass permits the observation of all important steps of the surface reactions which lead to bioactivity. This study shows the important relationship between composition and bioactivity which can determine the medical applicability of the glass.

Sensitivity of bacterial biofilms and planktonic cells to a new antimicrobial agent, Oxsil 320N.

The effective concentrations of disinfectants were determined for planktonic bacteria using the norms EN 1040 and NF T 72-150. This concentration corresponds to biocide efficacy after 5 min of contact, followed by neutralization. However, micro-organisms often colonize a substratum and form microcolonies or biofilms where they are enclosed in exopolymer matrices. Biofilms are commonly resistant to a broad range of antimicrobial agents, and resistance mechanisms involve exopolymer matrices, changes in gene expression and metabolic alterations. Due to these different resistance mechanisms, it is difficult to select and titrate antimicrobial agents to be effective against biofilms. In this context, SODIFRA developed a new disinfectant, Oxsil 320N (French patent 94 15 193). Oxsil 320N is an association of three active principles: hydrogen peroxide, acetic acid/peracetic acid and silver. This biocide was tested on planktonic bacteria and on 24-h biofilms formed on AISI 304 stainless steel surfaces. The effective concentration of Oxsil 320N was also determined on biofilms using SODIFRA recommendations (without neutralization of the biocide). Data showed that the antimicrobial efficacy measured on planktonic bacteria is not a reliable indicator of performance when biofilm is present. When biofilms were exposed to Oxsil 320N, the concentration needed to achieve a 10(5)-fold decrease in concentration was 10 times higher than that for bacterial suspensions (0.313% Oxsil 320N). An effective concentration of Oxsil 320N of 3.13% was required.

Behavior of human osteoblast-like cells in contact with electrodeposited calcium phosphate coatings.

Calcium-deficient hydroxyapatite (Ca-def-HAP) thin films were elaborated on Ti6Al4V substrates by electrodeposition. The coatings exhibit two different morphologies and crystallinities. Human osteoblast-like cells (MG-63) were cultured on the surfaces of these materials; the cell content and viability were evaluated up to 28 days. The scanning electron microscopy and biological investigations showed cells with a normal morphology, good proliferation, and viability from 7 to 21 days. But after 28 days, the number of live cells decreases in both cases; however, this decrease is less important in the case of calcium phosphate (CaP) coating surface when compared with the control (cell culture plastic). The cells cultured on Ca-def-HAP coating exhibit more cellular extensions and extracellular matrix. RT-PCR for type I collagen, alkaline phosphatase, and osteocalcin studies were also carried out, and was found that the CaP enhances gene expression of ALP and OC and thus the differentiation of osteoblast-like cells. Moreover, this study shows that the difference in the morphology of CaP coatings has no effect on the biocompatibility.

STEM and EDXS characterisation of physico-chemical reactions at the periphery of sol-gel derived Zn-substituted hydroxyapatites during interactions with biological fluids.

With its good properties of biocompatibility and bioactivity hydroxyapatite (HA) is highly used as bone substitutes and as coatings on metallic prostheses. In order to improve the bioactive properties of HA, we have elaborated Zn2+ doped hydroxyapatite. Zn2+ ions substitute for Ca2+ cations in the HA structure and four Zn concentrations (Zn/Zn+Ca) were prepared at 0.5, 1, 2 and 5 at.%. To study physico-chemical reactions at the materials periphery, we immersed the bioceramics into biological fluids for intervals from 1 day to 20 days. The surface changes were studied at the nanometer scale by scanning transmission electron microscopy associated with energy dispersive X-ray spectroscopy. After 20 days of immersion, we observed the formation of a calcium-phosphate layer at the periphery of the HA doped with 5% zinc. This layer contains magnesium and its thickness was around 200 nm. Formation of this Ca-P-Mg layer represents the bioactive properties of 5% Zn-substituted hydroxyapatite. This biologically active layer improves the properties of HA and will permit a chemical bond between the ceramic and bone.

Preparation and characterization of an electrodeposited calcium phosphate coating associated with a calcium alginate matrix.

A new way of optimizing osteoconduction of biomaterials is to bring to them biological properties. In this work, we associated a novel release system with an electrodeposited calcium phosphate (CaP) coated titanium alloy Ti6Al4V. The characterization of this material was performed by means of light microscopy, scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM) and X-ray energy dispersive spectroscopy (EDXS). The electrodeposited CaP coating was a tricalcium phosphate, and the release system was composed of microcapsules entrapped in an alginate film. We observed that the alginate matrix had a close contact with the coating. An intermediate layer containing calcium and phosphorus appeared at the interface between the alginate matrix and the CaP coating. These results allowed us to conclude that the association of two techniques, i.e. electrodeposition followed by deposition of a calcium alginate matrix, led to the elaboration of a new biomaterial.

Implementation of subcellular water mapping by electron energy loss spectroscopy in a medium-voltage scanning transmission electron microscope.

The water concentration in biological cells plays a predominant role in cellular life. Using electron energy loss spectroscopy, the feasibility to measure the water content in cells has already been demonstrated. In this paper, we present an upgrade of water measurement in hydrated cryosections by spectrum imaging mode in a medium-voltage scanning transmission electron microscope. The electron energy loss spectra are recorded in spectrum imaging mode in a 2(n)x2(n) pixels array. Each spectrum is processed in order to determine the water mass content in the corresponding pixel. Then a parametric image is obtained in which grey levels are related to water concentration. In this image, it is possible to recognize the different subcellular compartments. By averaging the water concentration over the relevant pixels, we can determine the water mass content in the concerned subcellular compartment. As an example, we present water mass content measurement at subcellular level in rat hepatocytes.

Matrix metalloproteinases MMP-2, -9 and tissue inhibitors TIMP-1, -2 expression and secretion by primary human osteoblast cells in response to titanium, zirconia, and alumina ceramics.

Osteogenic properties of bone cells are a key parameter governing osseointegration of implant devices. In this context, osteoblasts have a central role via extracellular matrix synthesis and remodeling that they regulate through different protease activity. In this study, we have analyzed the expression of two matrix metalloproteinases (MMPs): MMP-2 (72 kDa) and MMP-9 (92 kDa) and their specific tissue inhibitors TIMP-1 and TIMP-2 in primary human osteoblastic cells. The effect of titanium, zirconia, and alumina ceramics on the synthesis of these proteases was assessed using reverse transcriptase-polymerase chain reaction, enzyme-linked immunosorbent assay, and zymographic analysis. Our results showed that osteoblasts express MMP-2 and -9 mRNA. Furthermore, MMP-2 mRNA expression was decreased by titanium and increased by alumina whereas zirconia did not have any significant effect. Conversely, MMP-9 mRNA expression was stimulated by titanium but decreased with zirconia, whereas alumina induced no significant changes. Zymographic analysis has evidenced pro-MMP-2 gelatinolytic activity in all cell populations with time-dependent increase profile; pro-MMP-9, however, was not detected. Enzyme-linked immunosorbent assay data confirmed the production of MMP-2 and very low levels of MMP-9. In addition, TIMP-1 was secreted in 24-h-cultured cells and increased to maximal level at 48-72 h whereas TIMP-2 levels were very low. The interactions between human osteoblasts and the studied biomaterials altered both MMP-2, -9 and TIMP-1expression indicating that biomaterials may influence osseointegration and bone remodeling.

Influence of physicochemical reactions of bioactive glass on the behavior and activity of human osteoblasts in vitro.

Bioactive glasses are characterized by a bond to bone with a hydroxyl carbonate apatite layer. They enhance bone tissue formation and for this purpose are used in orthopedic surgery and in dental implantology. In the current work, we studied the biological response of human osteoblasts with a bioactive glass. This bioactive glass is based on 50% Si0(2), 20% Na(2)O, 16% CaO, 6% P(2)O(5), 5% K(2)0, 2% Al(2)O(3) and 1% MgO and designated A9. Cracks and irregularities were observed on the material surface when it was immersed in the culture medium. In addition, energy dispersive X-ray analyses highlighted a selective release of the elements at the surface of the bioactive glass, such as Na(+) and K(+) ions, released from the first day, contrary to the Si, Al, Ca, P, and Mg elements, which were released more slowly. Cell proliferation kinetics, total protein synthesis, and DNA content of the osteoblasts in contact with bioactive glass were similar to control cells. The morphological studies by light and scanning electron microscopy revealed an increasing cellular density in culture with bioactive glass without contact inhibition. The immunohistochemical studies highlighted the expression of types I, III, and V collagens by osteoblasts cultured in the presence of bioactive glass. The pH measurement of the culture medium in the presence of bioactive glass demonstrated a slight alkalinization. We thus conclude that human osteoblasts preserve their properties in the presence of bioactive glass (A9).

Human monocyte-derived macrophages and dendritic cells as targets for biomaterial cytocompatibility studies using an improved in vitro culture system.

Since macrophage plays a key role in the biocompatibility process, neoplastic macrophage cell lines and human blood monocytes are commonly used as target cells for in vitro biomaterial tolerance evaluation. However, tumor cells profoundly differ from normal tissue cells and monocytes are only precursors of macrophages. It has become possible to generate recently, under adherent-free conditions, fully mature macrophages and dendritic cells from human blood monocytes in the presence of GM-CSF and GM-CSF + IL4 respectively. In the present work, we examined the effects of titanium-alloy on morphology, adhesion, cell phenotype and TNF-alpha release activity of such differentiated cells grown in hydrophobic teflon bags. Scanning electron microscopy showed that macrophages substantially adhered and spread on titanium-alloy surface throughout the culture period, whereas only a few dendritic cells were adherent. The phenotype of both cell types remained unchanged in the presence of the tested material. However, titanium-alloy stimulated the secretion of TNF-alpha by the macrophages of some donors. This model of culture may offer new insights into the biomaterial evaluation and may be useful for studying individual responses induced by biomaterials.

Nestin expression in embryonic and adult human teeth under normal and pathological conditions.

Nestin is an intermediate filament most related to neurofilaments and expressed predominantly in the developing nervous system and muscles. In the present study we examined the in vivo distribution of nestin in human teeth during embryonic development and in permanent teeth under normal and pathological conditions. The results show that nestin is first expressed at the bell stage and that its distribution is restricted in pulpal cells located at the cusp area of the fetal teeth. In young permanent teeth, nestin is found only in functional odontoblasts, which produce the hard tissue matrix of dentin. Expression is progressively down-regulated and nestin is absent from older permanent teeth. In carious and injured teeth, nestin expression is up-regulated in a selective manner in odontoblasts surrounding the injury site, showing a link between tissue repair competence and nestin up-regulation under pathological conditions. In an in vitro assay system of human dental pulp explants, nestin is up-regulated after local application of bone morphogenic protein-4. A similar effect is seen in cultures of primary pulp cells during their differentiation into odontoblasts. Taken together, these results suggest that nestin plays a potential role in odontoblast differentiation during normal and pathological conditions and that bone morphogenic protein-4 is involved in nestin up-regulation.