Strontium and Copper Co-Doped Multifunctional Calcium Phosphates: Biomimetic and Antibacterial Materials for Bone Implants.

ß-tricalcium phosphate (ß-TCP) is a promising material in regenerative traumatology for the creation of bone implants. Previously, it was established that doping the structure with certain cations can reduce the growth of bacterial activity. Recently, much attention has been paid to co-doped ß-TCP, that is explained by their ability, on the one hand, to reduce cytotoxicity for cells of the human organism, on the other hand, to achieve a successful antibacterial effect. Sr, Cu-co-doped solid solutions of the composition Ca9.5-xSrxCu(PO4)7 was obtained by the method of solid-phase reactions. The Rietveld method of structural refinement revealed the presence of Sr2+ ions in four crystal sites: M1, M2, M3, and M4. The M5 site is completely occupied by Cu2+. Isomorphic substitution of Ca2+ → (Sr2+and Cu2+) expands the concentration limits of the existence of the solid solution with the ß-TCP structure. No additional phases were formed up to x = 4.5 in Ca9.5-xSrxCu(PO4)7. Biocompatibility tests were performed on cell lines of human bone marrow mesenchymal stromal cells (hMSC), human fibroblasts (MRC-5) and osteoblasts (U-2OS). It was demonstrated that cytotoxicity exhibited a concentration dependence, along with an increase in osteogenesis and cell proliferation. Ca9.5-xSrxCu(PO4)7 powders showed significant inhibitory activity against pathogenic strains Escherichia coli and Staphylococcus aureus. Piezoelectric properties of Ca9.5-xSrxCu(PO4)7 were investigated. Possible ways to achieve high piezoelectric response are discussed. The combination of bioactive properties of Ca9.5-xSrxCu(PO4)7 renders them multifunctional materials suitable for bone substitutes.

Novel Red Phosphor of Gd3+, Sm3+ co-Activated AgxGd((2-x)/3)-0.3-ySmyEu3+0.30☐(1-2x-2y)/3WO4 Scheelites for LED Lighting.

Gd3+ and Sm3+ co-activation, the effect of cation substitutions and the creation of cation vacancies in the scheelite-type framework are investigated as factors influencing luminescence properties. AgxGd((2-x)/3)-0.3-ySmyEu3+0.3☐(1-2x)/3WO4 (x = 0.50, 0.286, 0.20; y = 0.01, 0.02, 0.03, 0.3) scheelite-type phases (AxGSyE) have been synthesized by a solid-state method. A powder X-ray diffraction study of AxGSyE (x = 0.286, 0.2; y = 0.01, 0.02, 0.03) shows that the crystal structures have an incommensurately modulated character similar to other cation-deficient scheelite-related phases. Luminescence properties have been evaluated under near-ultraviolet (n-UV) light. The photoluminescence excitation spectra of AxGSyE demonstrate the strongest absorption at 395 nm, which matches well with commercially available UV-emitting GaN-based LED chips. Gd3+ and Sm3+ co-activation leads to a notable decreasing intensity of the charge transfer band in comparison with Gd3+ single-doped phases. The main absorption is the 7F0 → 5L6 transition of Eu3+ at 395 nm and the 6H5/2 → 4F7/2 transition of Sm3+ at 405 nm. The photoluminescence emission spectra of all the samples indicate intense red emission due to the 5D0 → 7F2 transition of Eu3+. The intensity of the 5D0 → 7F2 emission increases from ~2 times (x = 0.2, y = 0.01 and x = 0.286, y = 0.02) to ~4 times (x = 0.5, y = 0.01) in the Gd3+ and Sm3+ co-doped samples. The integral emission intensity of Ag0.20Gd0.29Sm0.01Eu0.30WO4 in the red visible spectral range (the 5D0 → 7F2 transition) is higher by ~20% than that of the commercially used red phosphor of Gd2O2S:Eu3+. A thermal quenching study of the luminescence of the Eu3+ emission reveals the influence of the structure of compounds and the Sm3+ concentration on the temperature dependence and behavior of the synthesized crystals. Ag0.286Gd0.252Sm0.02Eu0.30WO4 and Ag0.20Gd0.29Sm0.01Eu0.30WO4, with the incommensurately modulated (3 + 1)D monoclinic structure, are very attractive as near-UV converting phosphors applied as red-emitting phosphors for LEDs.

Mn2+ Luminescence in Ca9Zn1-xMnxNa(PO4)7 Solid Solution, 0 ≤ x ≤ 1.

The solid solution Ca9Zn1-xMnxNa(PO4)7 (0 ≤ x ≤ 1.0) was obtained by solid-phase reactions under the control of a reducing atmosphere. It was demonstrated that Mn2+-doped phosphors can be obtained using activated carbon in a closed chamber, which is a simple and robust method. The crystal structure of Ca9Zn1-xMnxNa(PO4)7 corresponds to the non-centrosymmetric ß-Ca3(PO4)2 type (space group R3c), as confirmed by powder X-ray diffraction (PXRD) and optical second-harmonic generation methods. The luminescence spectra in visible area consist of a broad red emission peak centered at 650 nm under 406 nm of excitation. This band is attributed to the 4T1 → 6A1 electron transition of Mn2+ ions in the ß-Ca3(PO4)2-type host. The absence of transitions corresponding to Mn4+ ions confirms the success of the reduction synthesis. The intensity of the Mn2+ emission band in Ca9Zn1-xMnxNa(PO4)7 rising linearly with increasing of x at 0.05 ≤ x ≤ 0.5. However, a negative deviation of the luminescence intensity was observed at x = 0.7. This trend is associated with the beginning of a concentration quenching. At higher x values, the intensity of luminescence continues to increase but at a slower rate. PXRD analysis of the samples with x = 0.2 and x = 0.5 showed that Mn2+ and Zn2+ ions replace calcium in the M5 (octahedral) sites in the ß-Ca3(PO4)2 crystal structure. According to Rietveld refinement, Mn2+ and Zn2+ ions jointly occupy the M5 site, which remains the only one for all manganese atoms within the range of 0.05 ≤ x ≤ 0.5. The deviation of the mean interatomic distance (∆l) was calculated and the strongest bond length asymmetry, ∆l = 0.393 Å, corresponds to x = 1.0. The large average interatomic distances between Mn2+ ions in the neighboring M5 sites are responsible for the lack of concentration quenching of luminescence below x = 0.5.

Abnormal Eu3+ → Eu2+ Reduction in Ca9-xMnxEu(PO4)7 Phosphors: Structure and Luminescent Properties.

ß-Ca3(PO4)2-type phosphors Ca9-xMnxEu(PO4)7 have been synthesized by high-temperature solid-phase reactions. The crystal structure of Ca8MnEu(PO4)7 was characterized by synchrotron X-ray diffraction. The phase transitions, magnetic and photoluminescence (PL) properties were studied. The abnormal reduction Eu3+ → Eu2+ in air was observed in Ca9-xMnxEu(PO4)7 according to PL spectra study and confirmed by X-ray photoelectron spectroscopy (XPS). Eu3+ shows partial reduction and coexistence of Eu2+/3+ states. It reflects in combination of a broad band from the Eu2+ 4f65d1 → 4f7 transition and a series of sharp lines attributed to 5D0 → 7FJ transitions of Eu3+. Eu2+/Eu3+ ions are redistributed among two crystal sites, M1 and M3, while Mn2+ fully occupies octahedral site M5 in Ca8MnEu(PO4)7. The main emission band was attributed to the 5D0 → 7F2 electric dipole transition of Eu3+ at 395 nm excitation. The abnormal quenching of Eu3+ emission was observed in Ca9-xMnxEu(PO4)7 phosphors with doping of the host by Mn2+ ions. The phenomena of abnormal reduction and quenching were discussed in detail.

Antimicrobial and Cell-Friendly Properties of Cobalt and Nickel-Doped Tricalcium Phosphate Ceramics.

ß-Tricalcium phosphate (ß-TCP) is widely used as bone implant material. It has been observed that doping the ß-TCP structure with certain cations can help in combating bacteria and pathogenic microorganisms. Previous literature investigations have focused on tricalcium phosphate structures with silver, copper, zinc, and iron cations. However, there are limited studies available on the biological properties of ß-TCP containing nickel and cobalt ions. In this work, Ca10.5-xNix(PO4)7 and Ca10.5-xCox(PO4)7 solid solutions with the ß-Ca3(PO4)2 structure were synthesized by a high-temperature solid-state reaction. Structural studies revealed the ß-TCP structure becomes saturated at 9.5 mol/% for Co2+ or Ni2+ ions. Beyond this saturation point, Ni2+ and Co2+ ions form impurity phases after complete occupying of the octahedral M5 site. The incorporation of these ions into the ß-TCP crystal structure delays the phase transition to the α-TCP phase and stabilizes the structure as the temperature increases. Biocompatibility tests conducted on adipose tissue-derived mesenchymal stem cells (aMSC) using the (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) (MTT) assay showed that all prepared samples did not exhibit cytotoxic effects. Furthermore, there was no inhibition of cell differentiation into the osteogenic lineage. Antibacterial properties were studied on the C. albicans fungus and on E. coli, E. faecalis, S. aureus, and P. aeruginosa bacteria strains. The Ni- and Co-doped ß-TCP series exhibited varying degrees of bacterial growth inhibition depending on the doping ion concentration and the specific bacteria strain or fungus. The combination of antibacterial activity and cell-friendly properties makes these phosphates promising candidates for anti-infection bone substitute materials.

NASICON-type Na3.6Lu1.8-x(PO4)3:xEu3+ phosphors: structure and luminescence.

Na3.6Lu1.8-x(PO4)3:xEu3+ phosphors were synthesized by a high-temperature solid-state reaction. A powder X-ray diffraction study revealed that homogeneous solid solutions with a NASICON-type structure were formed at 0 ≤ x ≤ 0.7. The Na3.6Lu1.8(PO4)3 structure was refined from the powder X-ray diffraction data and the cation distribution in the lattice sites of the NASICON-type structure was revealed. The refinement indicates structural disorder caused by the displacement of a part of Lu cations along the c axis inside the (Lu/Na)O6 octahedra that is confirmed by the broadened emission lines of Eu3+, which substitutes Lu cations. The highest Eu3+ luminescence intensity is found in Na3.6Lu1.8-x(PO4)3:xEu3+ for x = 0.5, whereas a further increase of the Eu3+ content leads to concentration quenching that is shown to occur due to the dipole-dipole interaction. An enhanced temperature stability of the Eu3+ emission was observed at the excitation energy of 3.23 eV. At this excitation energy, thermal quenching of the emission caused by the 7F0 → 5L7 transitions is compensated by the intensity increase of the emission related to the 7F1 → 5GJ transitions, which occurs due to the increase of the 7F1 level population, induced by a temperature rise.

K5Eu1-xTbx(MoO4)4 Phosphors for Solid-State Lighting Applications: Aperiodic Structures and the Tb3+ → Eu3+ Energy Transfer.

This paper describes the influence of sintering conditions and Eu3+/Tb3+ content on the structure and luminescent properties of K5Eu1-xTbx(MoO4)4 (KETMO). KETMO samples were synthesized under two different heating and cooling conditions. A K5Tb(MoO4)4 (KTMO) colorless transparent single crystal was grown by the Czochralski technique. A continuous range of solid solutions with a trigonal palmierite-type structure (α-phase, space group R3̅m) were presented only for the high-temperature (HT or α-) KETMO (0 ≤ x ≤ 1) prepared at 1123 K followed by quenching to liquid nitrogen temperature. The reversibility of the ß â†” α phase transition for KTMO was revealed by a differential scanning calorimetry (DSC) study. The low-temperature (LT)LT-K5Eu0.6Tb0.4(MoO4)4 structure was refined in the C2/m space group. Additional extra reflections besides the reflections of the basic palmierite-type R-subcell were present in synchrotron X-ray diffraction (XRD) patterns of LT-KTMO. LT-KTMO was refined as an incommensurately modulated structure with (3 + 1)D superspace group C2/m(0ß0)00 and the modulation vector q = 0.684b*. The luminescent properties of KETMO prepared at different conditions were studied and related to their structures. The luminescence spectra of KTMO samples were represented by a group of narrow lines ascribed to 5D4 → 7FJ (J = 3-6) Tb3+ transitions with the most intense emission line at 547 nm. The KTMO single crystal demonstrated the highest luminescence intensity, which was ∼20 times higher than that of LT-KTMO. The quantum yield λex = 481 nm for the KTMO single crystal was measured as 50%. The intensity of the 5D4 → 7F5 Tb3+ transition increased with the increase of x from 0.2 to 1 for LT and HT-KETMO. Emission spectra of KETMO samples with x = 0.2-0.9 at λex = 377 nm exhibited an intense red emission at ∼615 nm due to the 5D0 → 7F2 Eu3+ transition, thus indicating an efficient energy transfer from Tb3+ to Eu3+.

Influence of Synthesis Conditions on Gadolinium-Substituted Tricalcium Phosphate Ceramics and Its Physicochemical, Biological, and Antibacterial Properties.

Gadolinium-containing calcium phosphates are promising contrast agents for various bioimaging modalities. Gadolinium-substituted tricalcium phosphate (TCP) powders with 0.51 wt% of gadolinium (0.01Gd-TCP) and 5.06 wt% of (0.1Gd-TCP) were synthesized by two methods: precipitation from aqueous solutions of salts (1) (Gd-TCP-pc) and mechano-chemical activation (2) (Gd-TCP-ma). The phase composition of the product depends on the synthesis method. The product of synthesis (1) was composed of ß-TCP (main phase, 96%), apatite/chlorapatite (2%), and calcium pyrophosphate (2%), after heat treatment at 900 °C. The product of synthesis (2) was represented by ß-TCP (main phase, 73%), apatite/chlorapatite (20%), and calcium pyrophosphate (7%), after heat treatment at 900 °C. The substitution of Ca2+ ions by Gd3+ in both ß-TCP (main phase) and apatite (admixture) phases was proved by the electron paramagnetic resonance technique. The thermal stability and specific surface area of the Gd-TCP powders synthesized by two methods were significantly different. The method of synthesis also influenced the size and morphology of the prepared Gd-TCP powders. In the case of synthesis route (1), powders with particle sizes of tens of nanometers were obtained, while in the case of synthesis (2), the particle size was hundreds of nanometers, as revealed by transmission electron microscopy. The Gd-TCP ceramics microstructure investigated by scanning electron microscopy was different depending on the synthesis route. In the case of (1), ceramics with grains of 1-50 µm, pore sizes of 1-10 µm, and a bending strength of about 30 MPa were obtained; in the case of (2), the ceramics grain size was 0.4-1.4 µm, the pore size was 2 µm, and a bending strength of about 39 MPa was prepared. The antimicrobial activity of powders was tested for four bacteria (S. aureus, E. coli, S. typhimurium, and E. faecalis) and one fungus (C. albicans), and there was roughly 30% of inhibition of the micro-organism's growth. The metabolic activity of the NCTC L929 cell and viability of the human dental pulp stem cell study demonstrated the absence of toxic effects for all the prepared ceramic materials doped with Gd ions, with no difference for the synthesis route.

The role of anionic heterovalent [PO4]3- → [GeO4]4- substitution on the luminescence properties of inorganic phosphors with the ß-Ca3(PO4)2-type structure: new data based on accurate crystal structure refinement.

A series of solid-solution phosphate germanates Ca8+0.5xZnEu(PO4)7-x(GeO4)x (x = 0, 0.2, 0, 4, 0.6, 0.8, 1) with the ß-Ca3(PO4)2-type structure were synthesized by solid-state reactions. The limit of existence of a single-phase solid solution was determined by X-ray diffraction patterns and it was found at x = 0.8. The heterovalent tetrahedral [PO4]3- → [GeO4]4- substitution requires a charge compensation according to the scheme: [PO4]3- + ½ □ → [GeO4]4- + ½ Ca2+. The additional amount of Ca2+ ions in the crystal structure was detected at the M4 site during Rietveld refinement. It was shown that in ß-Ca3(PO4)2-type compounds, charge balancing is not provided by the randomly distributed oxygen vacancies but only by the partial occupancy of the M4 site. The presence of Ca2+ at the M4 site leads to a polar structure with the space group R3c which was confirmed by an SHG test for all single-phase samples. It was shown that the Ge4+ ions preferably occupy the T3 site in the structure, which is connected through common oxygen with the cationic M1-M5 sites. The analysis of the similarity of the previously reported Ca9La(GeO4)0.75(PO4)6 compound reveals an unexpectedly high value. The same structural similarity evaluation of the studied compound Ca8.1EuZn(PO4)6.8(GeO4)0.2 in the present work with the initial model gives a very small value, which indicates a good match between the initial and under-consideration structures. The luminescence properties of Eu3+ were investigated from the point of view of crystal structures and anionic substitutions. The integral intensity increased linearly with the [PO4]3- → [GeO4]4- substitution. It can be concluded that the anionic substitution on Ge4+ can improve the luminescence characteristics. The present study includes new data on the anionic substitution based on accurate crystal structure refinement.

Antibacterial and cell-friendly copper-substituted tricalcium phosphate ceramics for biomedical implant applications.

The development of new materials with antibacterial properties and the scope to decrease or eliminate the excessive antibiotic use is an urgent priority due to the growing antibiotic resistance-related mortalities. New bone substitute materials with intrinsic antibacterial characteristics are highly requested for various clinical applications. In this study, the choice of copper ions as substitutes for calcium in tricalcium phosphate (TCP) has been justified by their pronounced broad-spectrum antibacterial properties. Copper-substituted TCP (Cu-TCP) ceramics with the copper content of 1.4 and 0.1 wt% were synthesized by mechano-chemical activation. X-ray diffraction (XRD) analyses established that both pure and copper-containing compounds adopted the structure of whitlockite (ß-TCP). XRD and electron paramagnetic resonance (EPR) spectroscopy revealed the partial isovalent substitution of calcium ions with copper ions in the ß-TCP lattice. With the use of infrared and EPR spectroscopies, it was detected that carbonate ions got incorporated into the ß-TCP structure during the synthesis procedure. By releasing the tension in the M(5)O6 octahedron consequential to the lower CaO bond length than the corresponding sum of ionic radii, the substitution of calcium with smaller copper ions stabilizes the structure of ß-TCP. As concluded form the thermal analyses, the introduction of Cu prevented the polymorphic transformation of ß- to α-TCP. At the same time, the introduction of Cu to the ß-TCP structure enhanced the crystal growth and porosity of the ceramics, which had a positive effect on the cytocompatibility of the material. The MTT colorimetric assay showed that the metabolic activity of the mouse fibroblast NCTC L929 cell line during 24 h of incubation with 3-day extracts from Cu-TCP (1.4 wt%) and ß-TCP pellets in the cell culture medium was similar to the negative control, indicating the absence of any inhibitory effects on cells. The seeding and the growth of human dental pulp stem cells on the surface of Cu-TCP (1.4 wt%) and ß-TCP ceramics also showed the absence of any signs of cytotoxicity. Finally, microbiological assays demonstrated the antibacterial activity of Cu-TCP ceramics against Escherichia coli and Salmonella enteritidis, whereas ß-TCP did not exhibit such an activity. Overall, the addition of Cu ions to ß-TCP improves its antibacterial properties without diminishing the biocompatibility of the material, thus making it more attractive than pure ß-TCP for clinical applications such as synthetic bone grafts and orthopaedic implant coatings.

KTb(MoO4)2 Green Phosphor with K+-Ion Conductivity: Derived from Different Synthesis Routes.

The influence of different synthesis routes on the structure and luminescent properties of KTb(MoO4)2 (KTMO) was studied. KTMO samples were prepared by solid-state, hydrothermal, and Czochralski techniques. These methods lead to the following different crystal structures: a triclinic scheelite-type α-phase is the result for the solid-state method, and an orthorhombic KY(MoO4)2-type γ-phase is the result for the hydrothermal and Czochralski techniques. The triclinic α-KTMO phase transforms into the orthorhombic γ-phase when heated at 1273 K above the melting point, while KTMO prepared by the hydrothermal method does not show phase transitions. The influence of treatment conditions on the average crystallite size of orthorhombic KTMO was revealed by X-ray diffraction line broadening measurements. The electrical conductivity was measured on KTMO single crystals. The orthorhombic structure of KTMO that was prepared by the hydrothermal method was refined using synchrotron powder X-ray diffraction data. K+ cations are located in extensive two-dimensional channels along the c-axis and the a-axis. The possibility of K+ migration inside these channels was confirmed by electrical conductivity measurements, where strong anisotropy was observed in different crystallographic directions. The evolution of luminescent properties as a result of synthesis routes and heating and cooling conditions was studied and compared with data for the average crystallite size calculation and the grain size determination. All samples' emission spectra exhibit a strong green emission at 545 nm due to the 5D4 → 7F5 Tb3+ transition. The maximum of the integral intensity emission for the 5D4 → 7F5 emission under λex = 380 nm excitation was found for the KTMO crashed single crystal.

Role of the Eu3+ Distribution on the Properties of ß-Ca3(PO4)2 Phosphors: Structural, Luminescent, and 151Eu Mössbauer Spectroscopy Study of Ca9.5-1.5xMgEux(PO4)7.

The series of ß-Ca3(PO4)2-type phosphors Ca9.5-1.5xMgEux(PO4)7 were synthesized by a solid-state route. Observation of the proper Eu3+ ion distribution in the Ca9.5Mg(PO4)7 host matrix was made by a direct method using 151Eu Mössbauer spectroscopy in combination with X-ray analysis and dielectric and luminescent spectroscopy. The photoluminescence properties were studied in detail. The samples exhibit an exceptionally narrow-band red emission according to the dominant 5D0 → 7F2 transition and fulfill the industrial requirements for high-energy-efficiency red phosphors. The contribution of Eu3+ ions in different crystal sites to the luminescent properties is discussed in detail. The difference of the excitation of Eu3+ in the M1 and M2 sites was revealed by photoluminescence excitation spectra in accordance with structure refinement. The temperature dependence of the luminescence intensity was studied. Different tendencies in the thermal behavior of emission lines allow one to consider the studied compounds as phosphors suitable for luminescence thermometry. The measured quantum yield for Ca9.5-1.5xMgEux(PO4)7 shows excellent results and reaches 63%.

Sr9In(VO4)7 as a model ferroelectric in the structural family of ß-Ca3(PO4)2-type phosphates and vanadates.

Sr9In(VO4)7 was prepared by a solid-state method at 1270 K in air. This vanadate has the ß-Ca3(PO4)2-type structure and crystallizes in polar space group R3c. The structural parameters of Sr9In(VO4)7 were refined by the Rietveld method from laboratory powder X-ray diffraction data (XRD): the lattice parameters are a = 11.18016(9) Å and c = 39.6170(3) Å with Z = 6. In3+ cations occupy the octahedral M5 site, Sr2+ cations occupy the M1, M2, and M3 sites of the ß-Ca3(PO4)2-type structure, and the M4 site remains vacant. Sr9In(VO4)7 was characterized by differential thermal analysis (DTA), optical second-harmonic generation (SHG), high-temperature XRD, and dielectric measurements. All these methods prove the existence of a ferroelectric-paraelectric phase transition at T c = 974 K. This transition is compared with a similar transition in Ca9In(PO4)7 with lower T c = 902 K. The polar-to-centrosymmetric phase transition in such compounds has a quite unique mechanism of the order-disorder type. The structural transition involves slight shifts of the M1, M2, M3 cations and the E2O4, E3O4 tetrahedra, while half of the E1O4 tetrahedra (E = P or V) statistically reverse their orientation along the three-fold axis, so that the centre of symmetry appears in the structure as a whole. To invert the E1O4 tetrahedron, one oxygen anion should pass a large neighbouring cation (Sr2+ or Ca2+) that is only possible when intense rotational vibrations of the tetrahedra are excited at high temperatures. The lower Curie temperature in Ca9In(PO4)7 corresponds to the smaller rotational vibration amplitude of the P1O4 tetrahedron required to reverse this tetrahedra at T c in comparison with V1O4 in Sr9In(VO4)7.

Coexistence of three types of sodium motion in double molybdate Na9Sc(MoO4)6: 23Na and 45Sc NMR data and ab initio calculations.

The rechargeable Na-ion batteries attract much attention as an alternative to the widely used but expensive Li-ion batteries. The search for materials with high sodium diffusion is important for the development of solid state electrolytes. We present the results of experimental and ab initio studies of the Na-ion diffusion mechanism in Na9Sc(MoO4)6. The ion conductivity reaches the value of 3.6 × 10-2 S cm-1 at T ∼ 850 K. The 23Na and 45Sc NMR data reveal the coexistence of three different types of Na-ion motion in the temperature range from 300 to 750 K. They are activated at different temperatures and are characterized by substantially different dynamics parameters. These features are confirmed by ab initio calculations of activation barriers for sodium diffusion along various paths.

Synthesis, crystal structures and properties of the new compounds K7-xAg1+x(XO4)4 (X = Mo, W).

Two new isostructural compounds, namely heptapotassium silver tetrakis(tetraoxomolybdate), K7-xAg1+x(MoO4)4 (0 ≤ x ≤ 0.4), and heptapotassium silver tetrakis(tetraoxotungstate), K7-xAg1+x(WO4)4 (0 ≤ x ≤ 0.4), have been synthesized and found to crystallize in the polar space group P63mc (Z = 2) with the unit-cell dimensions a = 12.4188 (2) and c = 7.4338 (2) Šfor K6.68Ag1.32(MoO4)4 (single-crystal data), and a = 12.4912 (5) and c = 7.4526 (3) Šfor K7Ag(WO4)4 (Rietveld analysis data). Both structures represent a new structure type, with characteristic [K1(XO4)6] `pinwheels' of K1O6 octahedra and six XO4 tetrahedra (X = Mo, W) connected by common opposite faces into columns along the c axes. The octahedral columns are linked to each other through Ag1O4 tetrahedra along with the K2 and K3/Ag2 polyhedra, forming the polar rods (...Ag1O4-X1O4-empty octahedron-Ag1O4...). Ag1 is located almost at the centre of the largest face of its coordination tetrahedron and seems to have some mobility. The new structure type is related to the Ba6Nd2Al4O15 and CaBaSiO4 types, and to other structures of the α-K2SO4-glaserite family. The differential scanning calorimetry (DSC) and second harmonic generation (SHG) results show that both compounds undergo first-order phase transformations to high-temperature centrosymmetric phases.

Complex Structural Behavior of BiMn7O12 Quadruple Perovskite.

Structural properties of a quadruple perovskite BiMn7O12 were investigated by laboratory and synchrotron X-ray powder diffraction between 10 and 650 K, single-crystal X-ray diffraction at room temperature, differential scanning calorimetry (DSC), second-harmonic generation, and first-principles calculations. Three structural transitions were found. Above T1 = 608 K, BiMn7O12 crystallizes in a parent cubic structure with space group Im3̅. Between 460 and 608 K, BiMn7O12 adopts a monoclinic symmetry with pseudo-orthorhombic metrics (denoted as I2/m(o)), and orbital order appears below T1. Below T2 = 460 K, BiMn7O12 is likely to exhibit a transition to space group Im. Finally, below about T3 = 290 K, a triclinic distortion takes place to space group P1. Structural analyses of BiMn7O12 are very challenging because of severe twinning in single crystals and anisotropic broadening and diffuse scattering in powder. First-principles calculations confirm that noncentrosymmetric structures are more stable than centrosymmetric ones. The energy difference between the Im and P1 models is very small, and this fact can explain why the Im to P1 transition is very gradual, and there are no DSC anomalies associated with this transition. The structural behavior of BiMn7O12 is in striking contrast with that of LaMn7O12 and could be caused by effects of the Bi3+ lone electron pair.

The double molybdate Na9Sc(MoO4)6 refined from powder XRD data.

Na9Sc(MoO4)6 {nonasodium scandium hexakis[tetraoxidomolybdate(II)]} was synthesised by a solid-state method. The basic structure units are polyhedral clusters composed of an ScO6 octahedron and three NaO6 octahedra sharing total edges. The clusters are connected by sharing vertices with bridging MoO4 tetrahedra, forming a three-dimensional framework where the cavities are occupied by the other two crystallographically independent Na atoms.

BiScO3: centrosymmetric BiMnO3-type oxide.

With neutron powder diffraction, electron diffraction, and second-harmonic generation, we have shown that BiScO3 has a structure closely related to that of multiferroic BiMnO3, but BiScO3 crystallizes in the centrosymmetric space group of C2/c. These results bring up a question about the origin of ferroelectricity in BiMnO3. BiScO3 may serve as a model system to understand the role of Mn3+ ions in the ferroelectricity of BiMnO3.