Photochemical oxidation of VOCs and their source impact assessment on ozone under de-weather conditions in Western Taiwan.

The application of statistical models has excellent potential to provide crucial information for mitigating the challenging issue of ozone (O3) pollution by capturing its associations with explanatory variables, including reactive precursors (VOCs and NOX) and meteorology. Considering the large contribution of O3 in degrading the air quality of western Taiwan, three-year (2019-2021) hourly concentration data of VOC, NOX and O3 from 4 monitoring stations of western Taiwan: Tucheng (TC), Zhongming (ZM), Taixi (TX) and Xiaogang (XG), was evaluated to identify the effect of anthropogenic emissions on O3 formation. Owing to the high-ambient reactivity of VOCs on the underestimation of sources, photochemical oxidation was assessed to calculate the consumed VOC (VOCcons) which was followed by the source identification of their initial concentrations. VOCcons was observed to be highest in the summer season (16.7 and 22.7 ppbC) at north (TC and ZM) and in the autumn season (17.8 and 11.4 ppbC) in southward-located stations (TX and XG, respectively). Results showed that VOCs from solvents (25-27%) were the major source at northward stations whereas VOCs-industrial emissions (30%) dominated in south. Furthermore, machine learning (ML): eXtreme Gradient Boost (XGBoost) model based de-weather analysis identified that meteorological factors favor to reduce ambient O3 levels at TC, ZM and XG stations (-67%, -47% and -21%, respectively) but they have a major role in accumulating the O3 (+38%) at the TX station which is primarily transported from the upwind region of south-central Taiwan. Crucial insights using ML outputs showed that the finding of the study can be utilized for region-specific data-driven control of emission from VOCs-sources and prioritized to limit the O3-pollution at the study location-ns as well as their accumulation in distant regions.

Characterization of spatial-temporal distribution and microenvironment source contribution of PM2.5 concentrations using a low-cost sensor network with artificial neural network/kriging techniques.

Low-cost sensors (LCS) network is widely used to improve the resolution of spatial-temporal distribution of air pollutant concentrations in urban areas. However, studies on air pollution sources contribution to the microenvironment, especially in industrial and mix-used housing areas, still need to be completed. This study investigated the spatial-temporal distribution and source contributions of PM2.5 in the urban area based on 6-month of the LCS network datasets. The Artificial Neural Network (ANN) was used to calibrate the measured PM2.5 by the LCS network. The calibrated PM2.5 were shown to agree with reference PM2.5 measured by the BAM-1020 with R2 of 0.85, MNE of 30.91%, and RMSE of 3.73 µg/m3, which meet the criteria for hotspot identification and personal exposure study purposes. The Kriging method was further used to establish the spatial-temporal distribution of PM2.5 concentrations in the urban area. Results showed that the highest average PM2.5 concentration occurred during autumn and winter due to monsoon and topographic effects. From a diurnal perspective, the highest level of PM2.5 concentration was observed during the daytime due to heavy traffic emissions and industrial production. Based on the present ANN-based microenvironment source contribution assessment model, temples, fried chicken shops, traffic emissions in shopping and residential zones, and industrial activities such as the mechanical manufacturing and precision metal machining were identified as the sources of PM2.5. The numerical algorithm coupled with the LCS network presented in this study is a practical framework for PM2.5 hotspots and source identification, aiding decision-makers in reducing atmospheric PM2.5 concentrations and formulating regional air pollution control strategies.

Source-apportionment and spatial distribution analysis of VOCs and their role in ozone formation using machine learning in central-west Taiwan.

This study assessed the machine learning based sensitivity analysis coupled with source-apportionment of volatile organic carbons (VOCs) to look into new insights of O3 pollution in Yunlin County located in central-west region of Taiwan. One-year (Jan 1 to Dec 31, 2021) hourly mass concentrations data of 54 VOCs, NOX, and O3 from 10 photochemical assessment monitoring stations (PAMs) in and around the Yunlin County were analyzed. The novelty of the study lies in the utilization of artificial neural network (ANN) to evaluate the contribution of VOCs sources in O3 pollution in the region. Firstly, the station specific source-apportionment of VOCs were carried out using positive matrix factorization (PMF)-resolving six sources viz. AAM: aged air mass, CM: chemical manufacturing, IC: Industrial combustion, PP: petrochemical plants, SU: solvent use and VE: vehicular emissions. AAM, SU, and VE constituted cumulatively more than 65% of the total emission of VOCs across all 10 PAMs. Diurnal and spatial variability of source-segregated VOCs showed large variations across 10 PAMs, suggesting for distinctly different impact of contributing sources, photo-chemical reactivity, and/or dispersion due to land-sea breezes at the monitoring stations. Secondly, to understand the contribution of controllable factors governing the O3 pollution, the output of VOCs source-contributions from PMF model along with mass concentrations of NOX were standardized and first time used as input variables to ANN, a supervised machine learning algorithm. ANN analysis revealed following order of sensitivity in factors governing the O3 pollution: VOCs from IC > AAM > VE ≈ CM ≈ SU > PP ≈ NOX. The results indicated that VOCs associated with IC (VOCs-IC) being the most sensitive factor which need to be regulated more efficiently to quickly mitigate the O3 pollution across the Yunlin County.

The influence of COVID-19 pandemic on PM2.5 air quality in Northern Taiwan from Q1 2020 to Q2 2021.

The study aimed to investigate the PM2.5 variations in different periods of COVID-19 control measures in Northern Taiwan from Quarter 1 (Q1) 2020 to Quarter 2 (Q2) 2021. PM2.5 sources were classified based on long-range transport (LRT) or local pollution (LP) in three study periods: one China lockdown (P1), and two restrictions in Taiwan (P2 and P3). During P1 the average PM2.5 concentrations from LRT (LRT-PM2.5-P1) were higher at Fuguei background station by 27.9% and in the range of 4.9-24.3% at other inland stations compared to before P1. The PM2.5 from LRT/LP mix or pure LP (Mix/LP-PM2.5-P1) was also higher by 14.2-39.9%. This increase was due to higher secondary particle formation represented by the increase in secondary ions (SI) and organic matter in PM2.5-P1 with the largest proportion of 42.17% in PM2.5 from positive matrix factorization (PMF) analysis. A similar increasing trend of Mix/LP-PM2.5 was found in P2 when China was still locked down and Taiwan was under an early control period but the rapidly increasing infected cases were confirmed. The shift of transportation patterns from public to private to avoid virus infection explicated the high correlation of the increasing infected cases with the increasing PM2.5. In contrast, the decreasing trend of LP-PM2.5-P3 was observed in P3 with the PM2.5 biases of ∼45% at all the stations when China was not locked down but Taiwan implemented a semi-lockdown. The contribution of gasoline vehicle sources in PM2.5 was reduced from 20.3% before P3 to 10% in P3 by chemical signatures and source identification using PMF implying the strong impact of strict control measures on vehicle emissions. In summary, PM2.5 concentrations in Northern Taiwan were either increased (P1 and P2) or decreased (P3) during the COVID-19 pandemic depending on control measures, source patterns and meteorological conditions.

Novel Wire-on-Plate Electrostatic Precipitator (WOP-EP) for Controlling Fine Particle and Nanoparticle Pollution.

A new wire-on-plate electrostatic precipitator (WOP-EP), where discharge wires are attached directly on the surface of a dielectric plate, was developed to ease the installation of the wires, minimize particle deposition on the wires, and lower ozone emission while maintaining a high particle collection efficiency. For a lab-scale WOP-EP (width, 50 mm; height, 20 mm; length, 180 mm) tested at the applied voltage of 18 kV, experimental total particle collection efficiencies were found as high as 90.9-99.7 and 98.8-99.9% in the particle size range of 30-1870 nm at the average air velocities of 0.50 m/s (flow rate, 30 L/min; residence time, 0.36 s) and 0.25 m/s (flow rate, 15 L/min; residence time, 0.72 s), respectively. Particle collection efficiencies calculated by numerical models agreed well with the experimental results. The comparison to the traditional wire-in-plate EP showed that, at the same applied voltage, the current WOP-EP emitted 1-2 orders of magnitude lower ozone concentration, had cleaner discharge wires after heavy particle loading in the EP, and recovered high particle collection efficiency after the grounded collection plate was cleaned. It is expected that the current WOP-EP can be scaled up as an efficient air-cleaning device to control fine particle and nanoparticle pollution.