Factors Controlling Drug Release in Cross-linked Poly(valerolactone) Based Matrices.

There is keen interest in the development of biocompatible and biodegradable implantable delivery systems (IDDS) that provide sustained drug release for prolonged periods in humans. These systems have the potential to enhance therapeutic outcomes, reduce systemic toxicity, and improve patient compliance. Herein, we report the preparation and physicochemical characterization of cross-linked polymeric matrices from poly(valerolactone)- co-poly(allyl-δ-valerolactone) (PVL- co-PAVL) copolymers for use in drug delivery. A series of well-defined PVL- co-PAVL copolymers (PDI < 1.5) that vary in terms of MW and AVL content were prepared by ring opening polymerization catalyzed by 1,5,7-triazabicyclo[4.4.0]dec-5-ene. A subsequent cross-linking reaction using 1,6-hexanedithiol led to solid cylindrical amorphous or semicrystalline matrices as potential IDDS. High loading levels (up to 20% (w/w)) of several model drugs that vary in physicochemical properties, including paclitaxel, triamcinolone acetonide and hexacetonide, curcumin, and acetaminophen, were achieved using a postloading method in organic solvent. Drug-IDDS interactions were evaluated via the group contribution method and X-ray diffraction as well as calorimetric, spectroscopic, and microscopic techniques. Results indicate superior drug-matrix compatibility for drugs bearing phenyl groups. In vitro release studies under distinct sink conditions highlight the key factors (i.e., state and loading level of drug, solubility of drug in external media, and composition of release media) that impact drug release.

Interaction Forces between Pegylated Star-Shaped Polymers at Mica Surfaces.

We present a study focused on characterizing the interaction forces between mica surfaces across solutions containing star-shaped polymers with cationic ends. Using the surface forces apparatus, we show that the interaction forces in pure water between surfaces covered with the polymers can be adequately described by the dendronized brush model. In that framework, our experimental data suggest that the number of branches adsorbed at the surface decreases as the concentration of polymer in the adsorbing solution increases. The onset of interaction was also shown to increase with the concentration of polymer in solution up to distances much larger than the contour length of the polymer, suggesting that the nanostructure of the polymer film is significantly different from that of a monolayer. High compression of the polymer film adsorbed at low polymer concentration revealed the appearance of a highly structured hydration layer underneath the polymer layer. These results support that charged polymer chains do not necessarily come into close contact with the surface even if strong electrostatic interaction is present. Altogether, our results provide a comprehensive understanding of the interfacial behavior of star-shaped polymers and reveal the unexpected role of hydration water in the control of the polymer conformation.

Anionic Polymerization of an Amphiphilic Copolymer for Preparation of Block Copolymer Micelles Stabilized by π-π Stacking Interactions.

In this study, an amphiphilic copolymer that includes a core-forming block with phenyl groups was synthesized by living anionic polymerization of phenyl glycidyl ether (PheGE) on methoxy-polyethylene glycol (mPEG-b-PPheGE). Characterization of the copolymer revealed a narrow molecular distribution (PDI < 1.03) and confirmed the degree of polymerization of mPEG122-b-(PheGE)15. The critical micelle concentration of the copolymer was evaluated using an established fluorescence method with the aggregation behavior evaluated by dynamic light scattering and transmission electronic microscopy. The potential of the copolymer for use in drug delivery applications was evaluated in a preliminary manner including in vitro biocompatibility, loading and release of the hydrophobic anti-cancer drug doxorubicin (DOX). A stable micelle formulation of DOX was prepared with drug loading levels up to 14% (wt%), drug loading efficiencies > 60% (w/w) and sustained release of drug over 4 days under physiologically relevant conditions (acidic and neutral pH, presence of albumin). The high drug loading level and sustained release is attributed to stabilizing π-π interactions between DOX and the core-forming block of the micelles.

PEGylated bile acids for use in drug delivery systems: enhanced solubility and bioavailability of itraconazole.

Itraconazole is a drug of choice for the treatment of severe fungal infections and parasitic diseases, but its use is limited by its low water solubility and varying bioavailability. New self-emulsifying drug delivery systems (SEDDS) based on PEGylated bile acids (BA-PEGs) were designed and prepared, where the number and length of PEG arms were varied to optimize the loading of itraconazole in the final drug formulation. The use of both BA-PEGs and oleic acid improved the solubilization and absorption of the drug, which was in a glassy state in the SEDDS prepared with the melting method. High loading efficiencies of itraconazole (up to 20%) and stable liquid formulations were obtained at neutral pH, and full dispersion of itraconazole was reached in 2 h in simulated intestinal fluid (pH 6.8). Aqueous emulsions consisting of spherical micelles with mean hydrodynamic diameters (Dh) of ca. 75-220 nm, as verified by transmission electron microscopy and dynamic light scattering, are expected to improve the intestinal absorption of the drug. The new SEDDS showed good cytocompatibility by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays of BA-PEGs with Caco-2 and RAW 264.2 cells, and a low degree of hemolysis of human erythrocytes. The SEDDS based on PEGylated bile acids provide a controlled release system with significant improvement of the bioavailability of itraconazole in rats, as demonstrated by the pharmacokinetic studies.

Self-assembly of bile acid-PEG conjugates in aqueous solutions.

Thermoresponsive characteristics of oligo(ethylene glycol) derivatives of lithocholic acid (LCA) depend on the hydrophilic/hydrophobic balance of the compounds. Below a threshold temperature (∼30 °C), one of the derivatives, LCA(EG(4))(2), self-assembles in water into hollow nanotubes that form thixotropic gels at high concentrations. Two concentration regimes were observed in the plateau moduli (G(0) ∼ G'). At high concentrations, the mobility of the nanotubes is restricted at the ordered microdomains acting as cross-links. In semidilute aqueous solutions, the linkers between the aggregated domains in the fragile gel rupture easily, and this effect depends strongly on dilution. Organic hydrophobic additives perturb the self-assembling process, leading to changes in the two transition temperatures and poorer mechanical properties of the gel.

Aggregation behavior of pegylated bile acid derivatives.

Bile acids are amphiphilic endogenous steroids that act as anionic surfactants in the digestive tract and aggregate in aqueous solutions. Nonionic surfactants were synthesized by grafting poly(ethylene glycol) chains of various lengths (pegylation) to three bile acids (lithocholic, deoxycholic, and cholic acid) using anionic polymerization. The aggregation properties of the derivatives were studied with viscosity measurements and light scattering as well as with steady-state and time-resolved fluorescence techniques, and the aggregates were visualized by transmission electron microscopy to elucidate the effect of pegylation on the aggregation process. The fluorescence results showed a good correlation with the capacity of the bile acid derivatives to solubilize a hydrophobic drug molecule. The solubilization of ibuprofen depends on the length and the number of grafted PEG chains, and the solubilization efficiency increases with fewer PEG chains on the bile acid. The results indicate their potential for use in the design of new bile acid-based drug-delivery systems.

Thermosensitivity of bile acid-based oligo(ethylene glycol) stars in aqueous solutions.

Amphiphilic star-shaped oligo(ethylene glycol)s with a hydrophobic bile acid core and varying number of hydrophilic arms have been made. Their thermal behavior in aqueous solutions depends on the number rather than the length of the arms. The two-armed lithocholate derivative showed the strongest tendency for association and exhibited the lowest cloud point (79 °C) of the oligomers made, as well as another phase separation at a lower temperature (31 °C). The "double thermosensitivity" arising both from the salt-dependent LCST of the oligo(ethylene glycol) segments and the temperature-responsive self-assembly of amphiphilic bile acid derivative provides an interesting path in the design of bile acid-based smart materials.

Separation of chitosan oligomers by immobilized metal affinity chromatography.

A novel approach for chitosan oligosaccharide (COS) separation by immobilized metal affinity chromatography (IMAC) based on the differences in the interactions of chelated copper (II) ions with various COS (dimers, trimers, tetramers) is described. Polyhydroxylic chromatographic supports (agarose CL-6B and silica) were functionalized with various chelating functions such as iminodiacetate (IDA), carboxymethyl-aspartate (CM-Asp) and tris(carboxymethyl)ethylenediamine (TED). The COS retention capacities of the columns were between 2 and 6 mg/cm(3), depending on the chelating group. The COS were separated and/or enriched up to 95% for dimer and trimer and 90% for the tetramer, with yields of 60-95%.