RESUMO
Bistability enables adaptive designs with tunable deflections for applications including morphing wings, robotic grippers, and consumer products. Composite laminates may be designed to exhibit bistability due to pre-strains that develop during the processing of the polymer matrix, enabling fast reconfiguration between two stable shapes. Unfortunately, designing bistable laminates is challenging because of their highly nonlinear behavior. Here, we propose the Switching Tunneling Method to address this challenge by alternating between gradient-based local minimization and tunneling search phases, with the enhancement of objective expression switching to improve numerical conditioning. Results demonstrate high effectiveness compared to existing optimizers; the Switching Tunneling Method achieves a 99% success rate in finding all energy minima across general composite layups. Additionally, our method facilitates the inverse design of variable pre-strain fields, enabling bioinspired, positive Gaussian curvatures, which are not possible with conventional pre-strain laminates. Validations through both finite element analysis and 3D printed samples confirm the optimal designs.
RESUMO
Thermal rectification is a phenomenon of great practical importance where heat transfer is preferential in one direction. Programmable control of heat transfer in 3D space is key to enable thermal rectification at the macroscale but is rarely realized in natural materials or in current existing devices that are constructed at the nano and microscales with high system complexity. Here, modularly designed bulk metamaterials that can break the symmetry of heat transfer from one direction to the other are created, leading to thermal rectification in convergent or divergent states by tuning the metamaterial microstructural design. These thermal metamaterials are microstructured composites made using one material composition, however, they offer sufficient microstructural design freedom to allow tunable local thermal properties for unusual macroscopic heat transfer. The strategy and performance achieved are promising for next-generation thermal management.
RESUMO
Dental restorations are in increasing demand, yet their success rate strongly decreases after 5-10 years post-implantation, attributed in part to mismatching properties with the surrounding buccal environment that causes failures and wear. Among current research to address this issue, biomimetic approaches are promising. Nacre-like ceramic composites are particularly interesting because they combine multiple antagonistic properties making them more resistant to failure in harsh environment than other materials. With the rapid progress in 3D printing producing nacre-like structures has open up new opportunities not yet realised. In this paper, nacre-like composites of various compositions are reviewed in the context of hypothetical biomimetic dental restorations. Their structural, functional and biological properties are compared with those of dentin, enamel, and bone to determine which composition would be the most suitable for each of the 3 mineralized regions found in teeth. The role of complex microstructures and mineral orientations are discussed as well as 3D printing methods that allow the design and fabrication of such complex architectures. Finally, usage of these processes and anticipated prospects for next generation biomimetic dental replacements are discussed to suggest future research directions in this area. STATEMENT OF SIGNIFICANCE: With the current ageing population, dental health is a major issue and current dental restorations still have shortcomings. For the next generation of dental restorations, more biomimetic approaches would be desirable to increase their durability. Among current materials, nacre-like ceramic composites are interesting because they can approach the various structural properties found in the different parts of our teeth. Furthermore, it is also possible to embed self-sensing functionalities to enable monitoring of oral health. Finally, new recent 3D printing technologies now permit the fabrication of complex shapes with local compositions and local microstructures. With this current status of the research, we anticipate new dental restorations designs and highlight the remaining gaps and issues to address.
Assuntos
Nácar , Impressão Tridimensional , Cerâmica/química , Biomimética , MineraisRESUMO
Bioinspired composites exhibit well-defined microstructures, where anisotropic ceramic particles are assembled and bonded by an organic matrix. However, it is difficult to fabricate these composites where both the ceramic particles and organic matrix work together to unlock toughening mechanisms, such as shear dissipation, particle rotation and interlocking, etc, that lead to stiff, strong, and tough mechanical properties. Here, we produce composites inspired by seashells, made of alumina microplatelets assembled in complex microstructures and that are physically bonded by a small amount of interpenetrated polymer network (IPN) made of polyacrylamide (PAM) and poly-N-isopropylacrylamide (PNIPAM). The fabrication employs magnetically assisted slip-casting to orient the microplatelets as desired, andin situgelation of the IPN, followed by drying. The process was successful after carefully tuning the slip casting and gelation kinetics. Samples with horizontal, vertical, and alternating vertical and horizontal microplatelets orientations were then tested under compression. It was found that the IPN threads bonding the microplatelets acted as sacrificial bonds dissipating energy during the compression. Paired with the alternating microstructure, the IPN significantly enhanced the compressive toughness of the composites by 205% as compared to the composites with horizontal or vertical orientation only, with less than 35% reduction on the stiffness. This study demonstrates that microstructure control and design combined with a flexible and tough matrix can effectively enhance the properties of bioinspired ceramic polymer composites.
Assuntos
Óxido de Alumínio , Polímeros , Cerâmica/químicaRESUMO
Biomimicry is an interdisciplinary design approach that provides solutions to engineering problems by taking inspiration from nature. Given the established importance of biomimicry for building a sustainable world, there is a need to develop effective curricula on this topic. In this study, a workshop was conducted twice in Singapore: once with 14 students from a local high school in Singapore, and once with 11 undergraduate students in engineering from the United States. The workshop aimed to better understand how students conceptualize biomimicry following the bottom-up and top-down biomimetic methods. The workshop contained a lecture and laboratory session, and data were collected via questionnaires, field observation, and participant presentations at the end of the laboratory session. A qualitative analysis revealed that the top-down biomimetic approach was initially understood using vague and generic terms. In contrast, the students described the bottom-up approach using precise and technical vocabulary. By naming the themes highlighting the students' conceptualizations, it was concluded that strengthening the principle that makes the natural object unique and increasing interdisciplinary knowledge are needed to help them perform the top-down approach. The results from this work should be confirmed with a more significant number of participants, and they could help develop a curriculum to teach the two approaches effectively by providing tools to help the students generalize their ideas and abstract meaning from systems.
RESUMO
Mycelium-bound composites (MBCs) are materials obtained by growing fungi on a ligno-cellulosic substrate which have various applications in packaging, furniture, and construction industries. MBCs are particularly interesting as they are sustainable materials that can integrate into a circular economy model. Indeed, they can be subsequently grown, used, degraded, and re-grown. Integrating in a meaningful biocycle for our society therefore demands that MBCs fulfil antagonistic qualities which are to be at the same time durable and biodegradable. In this study, we conduct experiments using MBCs made from the fungus species Pleurotus ostreatus grown on bamboo microfibers substrate. By measuring the variations of the mechanical properties with time, we provide an experimental demonstration of a biocycle for such composites for in-door applications. We found that the biocycle can be as short as 5 months and that the use of sustainable coatings is critical to increase the durability of the composites while maintaining biodegradability. Although there are many scenarios of biocycles possible, this study shows a tangible proof-of-concept example and paves the way for optimization of the duration of each phase in the biocycle depending on the intended application and resource availability.
Assuntos
Pleurotus , Pleurotus/metabolismo , Micélio/metabolismoRESUMO
Miniaturized and high-power-density 3D electronic devices pose new challenges on thermal management. Indeed, prompt heat dissipation in electrically insulating packaging is currently limited by the thermal conductivity achieved by thermal interface materials (TIMs) and by their capability to direct the heat toward heat sinks. Here, high thermal conductivity boron nitride (BN)-based composites that are able to conduct heat intentionally toward specific areas by locally orienting magnetically functionalized BN microplatelets are created using magnetically assisted slip casting. The obtained thermal conductivity along the direction of alignment is unusually high, up to 12.1 W m-1 K-1 , thanks to the high concentration of 62.6 vol% of BN in the composite, the low concentration in polymeric binder, and the high degree of alignment. The BN composites have a low density of 1.3 g cm-3 , a high stiffness of 442.3 MPa, and are electrically insulating. Uniquely, the approach is demonstrated with proof-of-concept composites having locally graded orientations of BN microplatelets to direct the heat away from two vertically stacked heat sources. Rationally designing the microstructure of TIMs to direct heat strategically provides a promising solution for efficient thermal management in 3D integrated electronics.
RESUMO
Microstructured composites with hierarchically arranged fillers fabricated by three-dimensional (3D) printing show enhanced properties along the fillers' alignment direction. However, it is still challenging to achieve good control of the filler arrangement and high filler concentration simultaneously, which limits the printed material's properties. In this study, we develop a magnetically assisted drop-on-demand 3D printing technique (MDOD) to print aligned microplatelet reinforced composites. By performing drop-on-demand printing using aqueous slurry inks while applying an external magnetic field, MDOD can print composites with microplatelet fillers aligned at set angles with high filler concentrations up to 50 vol%. Moreover, MDOD allows multimaterial printing with voxelated control. We showcase the capabilities of MDOD by printing multimaterial piezoresistive sensors with tunable performances based on the local microstructure and composition. MDOD thus creates a large design space to enhance the mechanical and functional properties of 3D printed electronic or sensing devices using a wide range of materials.
RESUMO
Plants are inspiring models for adaptive, morphing systems. In addition to their shape complexity, they can respond to multiple stimuli and exhibit both fast and slow motion. We attempt to recreate these capabilities in synthetic structures, proposing a fabrication and design scheme for multi-stimuli and multi-temporal responsive plant-inspired composites. We leverage a hierarchical, spatially tailored microstructural and compositional scheme to enable both fast morphing through bistability and slow morphing through diffusion processes. The composites consisted of a hydrogel layer made of gelatine and an architected particle-reinforced epoxy bilayer. Using magnetic fields to achieve spatially distributed orientations of magnetically responsive platelets in each epoxy layer, complex bilayer architectural patterns in various geometries were realised. This feature enabled the study of plant-inspired complex designs,viafinite element analysis and experiments. We present the design and fabrication strategy utilizing the material properties of the composites. The deformations and temporal responses of the resulting composites are analysed using digital image correlation. Finally, we model and experimentally demonstrate plant-inspired composite shells whose stable shapes closely mimic those of the Venus flytrap, while maintaining the multi-stimuli and multi-temporal responses of the materials. The key to achieving this is to tune the local in-plane orientations of the reinforcing particles in the bilayer shapes, to induce distributed in-plane mechanical properties and shrinkage. How these particles should be distributed is determined using finite element modelling. The work presented in this study can be applied to autonomous applications such as robotic systems.
Assuntos
Droseraceae , Droseraceae/fisiologia , Hidrogéis/química , Movimento (Física) , PlantasRESUMO
Bioinspired self-shaping is an approach used to transform flat materials into unusual three-dimensional (3D) shapes by tailoring the internal architecture of the flat material. Bioinspiration and bioinspired materials have a high potential for fostering sustainable development, yet are often fashioned out of expensive and synthetic materials. In this work, we use bioinspiration to endow clay with self-shaping properties upon drying. The composites created are based on clay and starch, and the internal architecture is built using celery fibers. The viscosity, shrinkage, and bending of the architected composite monolayers are studied for several compositions by measuring penetration depth and using optical characterization methods. Bilayer structures inspired from plants are then processed using a simple hand layup process to achieve bending, twisting, and combinations of those after drying. By layering a mixture of 32 vol% clay, 25.8 vol% starch, and 42.2 vol% water with 40 wt% embedded aligned celery fibers, it is possible to obtain the desired shape change. The work presented here aims at providing a simple method for teaching the concept of bioinspiration, and for creating new materials using only clay and plant-based ingredients. Rejuvenating clay with endowed self-shaping properties could further expand its use. Furthermore, the materials, methods, and principles presented here are affordable, simple, largely applicable, and could be used for sustainable development in the domain of education as well as materials and structures.
RESUMO
External magnetic fields are known to attract and orient magnetically responsive colloidal particles. In the case of 2D microplatelets, rotating magnetic fields are typically used to orient them parallel to each other in a brick-and-mortar fashion. Thanks to this microstructure, the resulting composites achieve enhanced mechanical and functional properties. However, parts with complex geometries require their microstructure to be specifically tuned and controlled locally in 3D. Although the tunability of the microstructure along the vertical direction has already been demonstrated using magnetic orientation combined with sequential or continuous casting, controlling the particle orientation in the horizontal plane in a fast and effective fashion remains challenging. Here, we propose to use rotating magnetic arrays to control the in-plane orientation of ferromagnetic nickel flakes distributed in curable polymeric matrices. We experimentally studied the orientation of the flakes in response to magnets rotating at various frequencies and precessing angles. Then, we used COMSOL to model the magnetic field from rotating magnetic arrays and predicted the resulting in-plane orientations. To validate the approach, we created composites with locally oriented flakes. This work could initiate reverse-engineering methods to design the microstructure in composite materials with intricate geometrical shapes for structural or functional applications.
RESUMO
The transition from a linear to a circular economy is urgently needed to mitigate environmental impacts and loss of biodiversity. Among the many potential solutions, the development of entirely natural-based materials derived from waste is promising. One such material is mycelium-bound composites obtained from the growth of fungi onto solid lignocellulosic substrates, which find applications such as insulating foams, textiles, packaging, etc. During growth, the fungus degrades and digests the substrate to create a web-like stiff network called mycelium. The development of the mycelium is influenced by several factors, including the substrate composition. As food waste accounts for nearly 44% of total municipal solid waste, incorporating food in the substrate composition could be a means to increase the nutrients absorbed by the fungus. In this paper, we study the effects of the addition of food supplements on the growth of two fungal species, Ganoderma lucidum and Pleurotus ostreatus. The substrates, the food supplements, and the mycelia are characterized using Fourier-transform infrared spectroscopy, scanning electron microscopy, and optical microscopy. Our results show that addition of barley as a supplement significantly boosts the growth of G. lucidum and P. ostreatus. Using a common food as a nutritious enrichment for the development of mycelium is a simple and straightforward strategy to create waste-based mycelium-bound biocomposites for a large range of applications, on-site, therefore promoting a circular economy.
Assuntos
Alimentos , Micélio/crescimento & desenvolvimento , Pleurotus/crescimento & desenvolvimento , Eliminação de Resíduos , Reishi/crescimento & desenvolvimentoRESUMO
To respond to the increasing need for bone repair strategies, various types of biomaterials have been developed. Among those, calcium phosphate (CaP) ceramics are promising since they possess a chemical composition similar to that of bones. To be suitable for implants, CaP ceramics need to fulfill a number of biological and mechanical requirements. Fatigue resistance and toughness are two key mechanical properties that are still challenging to obtain in CaP ceramics. This paper thus reviews and discusses current progress in the processing of CaP ceramics with bioinspired microstructures for load-bearing applications. First, methods to obtain CaP ceramics with bioinspired structure at individual lengthscales, namely nano-, micro-, and macroscale are discussed. Then, approaches to attain synergistic contribution of all lengthscales through complex and biomimetic hierarchical structures are reviewed. The processing methods and their design capabilities are presented and the mechanical properties of the materials they can produce are analyzed. Their limitations and challenges are finally discussed to suggest new directions for the fabrication of biomimetic bone implants with satisfactory properties. The paper could help biomedical researchers, materials scientists and engineers join forces to create the next generation of bone implants.
Assuntos
Substitutos Ósseos , Fosfatos de Cálcio , Materiais Biocompatíveis , Biomimética , Osso e Ossos , CerâmicaRESUMO
Materials combining optical transparency and mechanical strength are highly demanded for electronic displays, structural windows and in the arts, but the oxide-based glasses currently used in most of these applications suffer from brittle fracture and low crack tolerance. We report a simple approach to fabricate bulk transparent materials with a nacre-like architecture that can effectively arrest the propagation of cracks during fracture. Mechanical characterization shows that our glass-based composites exceed up to a factor of 3 the fracture toughness of common glasses, while keeping flexural strengths comparable to transparent polymers, silica- and soda-lime glasses. Due to the presence of stiff reinforcing platelets, the hardness of the obtained composites is an order of magnitude higher than that of transparent polymers. By implementing biological design principles into glass-based materials at the microscale, our approach opens a promising new avenue for the manufacturing of structural materials combining antagonistic functional properties.
RESUMO
Multi-layered composites in nature often show functional properties that are determined by the specific orientation of inorganic building blocks within each layer. The shell of bivalve molluscs and the exoskeleton of crustaceans constitute prominent examples. An effective approach to artificially produce textured microstructures inspired by such complex composites is magnetically assisted slip casting (MASC). MASC is a colloidal process in which anisotropic particles are magnetically oriented at arbitrarily defined angles and collected at the surface of a porous mould to grow the material in an additive manner. Whereas a number of proof-of-concept studies have established the potential of the technique, the full design space available for MASC-fabricated structures, and the limits of the approach, have so far not been explored systematically. To fill this gap, we have studied both theoretically and experimentally the various torques that act on the particles at the different stages of the assembly process. We define the boundary conditions of the MASC process for magnetically responsive alumina platelets suspended in a low-viscosity aqueous suspension, considering the composition of the colloidal suspension and the dynamics of the particle alignment process under a rotating magnetic field. These findings lead to design guidelines for the fabrication of bio-inspired composites with customized multi-scale structures for a broad range of applications.
RESUMO
Liquid-liquid phase separation (LLPS) of proteins into concentrated microdroplets (also called coacervation) is a phenomenon that is increasingly recognized to occur in many biological processes, both inside and outside the cell. While it has been established that LLPS can be described as a spinodal decomposition leading to demixing of an initially homogeneous protein solution, little is known about the assembly pathways by which soluble proteins aggregate into dense microdroplets. Using recent developments in techniques enabling the observation of matter suspended in liquid by transmission electron microscopy, we observed how a model intrinsically disordered protein phase-separates in liquid environment. Our observations reveal the dynamic mechanisms by which soluble proteins self-organize into condensed microdroplets with nanoscale and millisecond space and time resolution, respectively. With this method, the nucleation and initial growth steps of LLPS could be captured, opening the door for a deeper understanding of biomacromolecular complexes exhibiting LLPS ability.
Assuntos
Proteínas Intrinsicamente Desordenadas/química , Nanoestruturas/química , Transição de Fase , Animais , Fenômenos Bioquímicos , Decapodiformes/química , Microscopia Eletrônica de Transmissão/métodos , Multimerização ProteicaRESUMO
Biomineralization, the process by which mineralized tissues grow and harden via biogenic mineral deposition, is a relatively lengthy process in many mineral-producing organisms, resulting in challenges to study the growth and biomineralization of complex hard mineralized tissues. Arthropods are ideal model organisms to study biomineralization because they regularly molt their exoskeletons and grow new ones in a relatively fast timescale, providing opportunities to track mineralization of entire tissues. Here, we monitored the biomineralization of the mantis shrimp dactyl club-a model bioapatite-based mineralized structure with exceptional mechanical properties-immediately after ecdysis until the formation of the fully functional club and unveil an unusual development mechanism. A flexible membrane initially folded within the club cavity expands to form the new club's envelope. Mineralization proceeds inwards by mineral deposition from this membrane, which contains proteins regulating mineralization. Building a transcriptome of the club tissue and probing it with proteomic data, we identified and sequenced Club Mineralization Protein 1 (CMP-1), an abundant mildly phosphorylated protein from the flexible membrane suggested to be involved in calcium phosphate mineralization of the club, as indicated by in vitro studies using recombinant CMP-1. This work provides a comprehensive picture of the development of a complex hard tissue, from the secretion of its organic macromolecular template to the formation of the fully functional club.
Assuntos
Calcificação Fisiológica/fisiologia , Crustáceos/fisiologia , Animais , Fosfatos de Cálcio/metabolismo , ProteômicaRESUMO
Mechanosensing is ubiquitous in natural systems. From the skin ridges of our finger tips to the microscopic ion channels in cells, mechanosensors allow organisms to probe their environment and gather information needed for processing, decision making, and actuation. Despite technological advances in synthetic mechanosensing, it remains challenging to achieve this functionality at the scale of large stiff structures where both the amount of data to sense locally and the diversity of input stresses that the sensors have to withstand require highly tunable systems. Filtered sensing using mechanical displacement is an effective strategy developed by organisms to cope with large sets of stimuli. Inspired by this biological strategy, we fabricate bistable elements that can passively filter mechanical inputs, translate them into electrical signals, and be reset to their original sensing state using an external magnetic field. These multiple functionalities are achieved using hierarchically structured composites that can be arranged in large-area arrays. The filtering capability and fast passive response of our mechanosensors are experimentally demonstrated using simple electrical circuits and magnets. Thanks to their scalability and applicability to a wide range of material systems, these low-power sensors are avenues for the fabrication of load-bearing structures that are able to sense, compute, communicate, and autonomously adapt in response to external magneto-mechanical stimuli.