Partial nitritation/anammox applied to real anaerobically pretreated domestic sewage under subtropical climate: aeration strategies and nitrogen cycle bacteria.

The combination of sewage anaerobic treatment and partial nitritation/anammox process (PN/A) can make wastewater treatment plants energetically self-sufficient. However, PN/A application has been a challenge in low-nitrogen wastewaters and it is little explored in anaerobically pretreated domestic sewage, as well as aeration strategies and the PN/A feasibility at ambient temperature. This study investigated PN/A in a sequential batch reactor (SBR) treating real anaerobically pretreated domestic sewage. After the startup, SBR was fed with real wastewater and operated at 35°C and at ambient temperature (20-31°C) without total nitrogen (TN) removal decrease (71 ± 8 and 75 ± 6%, respectively). The median ammonium and TN removals were 68 ± 21 and 59 ± 9%, respectively with 7 min on/14 min off strategy, which represents 12.3 ± 4.2 mg L-1 N-NH4+ effluent, which is lower than Brazilian discharge limits. The qPCR results showed anammox abundance in the range of 108-109 n° copies gVSS-1. Thus, results were very promising and showed the feasibility of the PN/A process for treating real anaerobically pretreated domestic sewage at ambient temperature.

Antibiotic resistance profile of wastewater treatment plants in Brazil reveals different patterns of resistance and multi resistant bacteria in final effluents.

Wastewater treatment plants (WWTPs) are recognized as important sources of Antibiotic Resistant Bacteria (ARBs) and Antibiotic Resistant Genes (ARGs), and might play a role in the removal and dissemination of antimicrobial resistance (AMR) in the environment. Detailed information about AMR removal by the different treatment technologies commonly applied in urban WWTPs is needed. This study investigated the occurrence, removal and characterization of ARBs in WWTPs employing different technologies: WWTP-A (conventional activated sludge-CAS), WWTP-B (UASB reactor followed by biological trickling filter) and WWTP-C (modified activated sludge followed by UV disinfection-MAS/UV). Samples of raw sewage (RI) and treated effluent (TE) were collected and, through the cultivation-based method using 11 antibiotics, the antibiotic resistance profiles were characterized in a one-year period. MAS was effective in reducing ARB counts (2 to 3 log units), compared to CAS (1 log unit) and UASB/BTF (0.5 log unit). The composition of cultivable ARB differed between RI and TE samples. Escherichia was predominant in RI (56/118); whilst in TE Escherichia (31/118) was followed by Bacillus (22/118), Shigella (14/118) and Enterococcus (14/118). Most of the isolates identified (370/394) harboured at least two ARGs and in over 80 % of the isolates, 4 or more ARG (int1, blaTEM, TetA, sul1 and qnrB) were detected. A reduction in the resistance prevalence was observed in effluents after CAS and MAS processes; whilst a slight increase was observed in treated effluents from UASB/BTF and after UV disinfection stage. The multi-drug resistance (MDR) phenotype was attributed to 84.3 % of the isolates from RI (27/32) and 63.6 % from TE (21/33) samples and 52.3 % of the isolates (34/65) were resistant to carbapenems (imipenem, meropenem, ertapenem). The results indicate that treated effluents are still a source for MDR bacteria and ARGs dissemination to aquatic environments. The importance of biological sewage treatment was reinforced by the significant reductions in ARB counts observed. However, implementation of additional treatments is needed to mitigate MDR bacteria release into the environment.

Effects of activated sludge and UV disinfection processes on the bacterial community and antibiotic resistance profile in a municipal wastewater treatment plant.

Wastewater tertiary treatment has been pointed out as an effective alternative for reducing the concentration of antibiotic resistant bacteria and genes (ARB and ARGs) in wastewaters. The present work aimed to build on the current knowledge about the effects of activated sludge and UV irradiation on antibiotic resistance determinants in biologically treated wastewaters. For that, the microbial community and ARGs' composition of samples collected after preliminary (APT), secondary (AST), and tertiary (ATT) treatments in a full-scale wastewater treatment plant using a modified activated sludge (MAS) system followed by an UV stage (16 mJ/cm2) were investigated through culture-dependent and independent approaches (including metagenomics). A total of 24 phyla and 460 genera were identified, with predominance of Gammaproteobacteria in all samples. Pathogenic genera corresponded to 8.6% of all sequences on average, mainly Acinetobacter and Streptococcus. Significant differences (p < 0.05) in the proportion of pathogens were observed between APT and the other samples, suggesting that the secondary treatment reduced its abundance. The MAS achieved 64.0-99.7% average removal efficiency for total (THB) and resistant heterotrophic bacteria, although the proportions of ARB/THB have increased for sulfamethoxazole, cephalexin, ciprofloxacin, and tetracycline. A total of 107 copies/mL of intI1 gene remained in the final effluent, suggesting that the treatment did not significantly remove this gene and possibly other ARGs. In accordance, metagenomic results suggested that number of reads recruited to plasmid-associated ARGs became more abundant in the pool throughout the treatment, suggesting that it affected more the bacteria without these ARGs than those with it. In conclusion, disinfected effluents are still a potential source for ARB and ARGs, which highlights the importance to investigate ways to mitigate their release into the environment.

Aeration strategies and temperature effects on the partial nitritation/anammox process for nitrogen removal: performance and bacterial community assessment.

The partial nitritation/anammox process (PN/A) could be a promising alternative for nitrogen removal from high-strength wastewater. There is, however, a lack of information about suitable aeration and temperature for PN/A in single-stage reactors for high-strength wastewater, such as food waste (FW) digestate treatment. To this end, a laboratory-scale (10 L) partial nitritation/anammox sequencing batch reactor was operated for more than 230 days under four different intermittent aeration strategies and temperature variations (35°C and ambient temperature - 26-29°C) to investigate the feasibility of nitrogen removal from real FW digestate. High ammonium (NH4+-N) and total nitrogen (TN) removal median efficiencies of 81 and 63%, respectively (corresponding to median NH4+-N and TN loads removed of 76 and 67 g.m-3.d-1), were achieved when the aeration strategy comprised by 7 min/14 min off and an airflow rate of 0.050 L.min-1.Lreactor-1 was applied. Nitrogen removal efficiencies were not affected by temperature variations in southeastern Brazil. COD, chloride and organic nitrogen (520, 239 and 102.8 mg.L-1, respectively) did not prevent PN/A. Changes of the bacterial community in response to aeration strategies were observed. Candidatus Brocadia dominated most of the time being more resistant to aeration and temperature changes than Candidatus Jettenia. This study demonstrated that optimizations of anoxic periods and airflow rate support PN/A with high nitrogen removal from FW digestate.

Monitoramento do esgoto como ferramenta de vigilância epidemiológica para controle da COVID-19: estudo de caso na cidade de Belo Horizonte / Sewage monitoring as a surveillance epidemiological tool for COVID-19 control: a case study in the city of Belo Horizonte

RESUMO A recente detecção de material genético (RNA) do novo coronavírus em amostras de fezes e no esgoto aponta para a possibilidade de se identificar a circulação do vírus e até mesmo estimar o número de pessoas infectadas em determinada região pelo monitoramento sistemático do esgoto, configurando-se em importante ferramenta epidemiológica de testagem massiva indireta, incluindo portadores sintomáticos e assintomáticos. Nesse sentido, concebeu-se um projeto para a detecção e a quantificação do novo coronavírus em amostras de esgoto coletadas em 15 sub-bacias de esgotamento sanitário dos ribeirões Arrudas e Onça, visando entender a dinâmica de circulação e a prevalência do vírus nas regiões investigadas. Tais sub-bacias esgotam os efluentes gerados por uma população da ordem de 1,5 milhão de pessoas no município de Belo Horizonte e parte de Contagem. O plano de amostragem contemplou 17 pontos (15 sub-bacias + afluente às 2 estações de tratamento de esgoto) de monitoramento semanal, com coletas compostas durante todo o período da manhã. A detecção e a quantificação do RNA viral efetuaram-se em laboratório por meio de ensaios de RT-qPCR. Os resultados obtidos em quatro semanas de monitoramento (semanas epidemiológicas 21 a 24) mostraram um incremento da ocorrência do vírus, atingindo 100% das regiões investigadas na semana epidemiológica 24. A estimativa da população infectada pelo novo coronavírus pelo monitoramento do esgoto em Belo Horizonte apresentou tendência de crescimento exponencial, sendo até 20 vezes maior do que o número de casos confirmados acumulados. Quanto à circulação do vírus, as concentrações do RNA viral têm se mostrado bastante variáveis nas regiões monitoradas, com maiores porcentagens de população infectada estimada ao norte e nordeste da capital mineira.

ABSTRACT The recent detection of SARS-CoV-2 RNA in stool and sewage samples highlights the possibility of mapping the circulation of the virus and even estimating the number of infected people through the systematic monitoring of sewage in a specific region. Therefore, this is an important epidemiological tool for large-scale indirect testing, including symptomatic and asymptomatic carriers. This project was conceived for the detection and quantification of the SARS-CoV-2 in sewage samples collected in 15 watersheds of the Arrudas and Onça streams, aiming to understand the dynamics of spread and the prevalence of the virus in these regions/watersheds. These sub-basins exhaust the effluents generated by a population of approximately 1.5 million people in the municipality of Belo Horizonte and part of Contagem. Weekly composite samples were collected during the morning periods in seventeen monitoring points (15 water sheds + influent to 2 sewage treatment plants). RNA detection and quantification were performed in the laboratory using RT-qPCR. The results obtained in four weeks of monitoring (epidemiological weeks 21 to 24) showed an increase in the occurrence of the virus, reaching 100% of the monitored regions investigated in epidemiological week 24. The infected population, estimated by sewage monitoring in Belo Horizonte, showed exponential growth, being up to 20 times higher than those of accumulated confirmed cases. As for the dynamics of virus spread, RNA concentrations have shown to be quite variable in the monitored regions with higher percentages of the estimated infected population in the northern and north-eastern portions of Belo Horizonte.

Nitratation in pilot-scale bioreactors fed with effluent from a submerged biological aerated filter used in the treatment of dog wastewater.

Nitrification is a biochemical process that allows oxidation of ammonium ion to nitrite, and nitrite to nitrate in a system. Aerobic processes, such as use of submerged biological aerated filter (SBAF), enable nitrification. However, some variables that are entirely unavailable or not available at the required concentration range may hamper the process. In this study, nitratation under high dissolved oxygen (DO) concentrations was evaluated in laboratory-scale bioreactors containing 10% inoculum (0.5 kg kg-1) fed with affluent from a SBAF that receive the sewage generated from washing the bays of a dog kennel. The following variables were monitored over time: ammoniacal nitrogen (12.44-29.62 mg L-1), nitrite (0.28-0.54 mg L-1), nitrate (1.75-3.55 mg L-1), pH (8.11 ± 0.62), temperature (21.61 ± 1.24°C) and DO (9.69 ± 0.36 mg L-1). Quantification of nitrifying bacteria by the multiple tube technique showed the value of 1.4 × 1012 MPN mL-1for ammonia-oxidizing bacteria (AOB) and 9.2 × 1014 MPN mL-1 for nitrite-oxidizing bacteria. These values were higher than those found in a synthetic medium, which can be explained by the greater availability of ammonium and nitrite in the effluent. By the extraction of genomic DNA, and PCR, with specific primers, the presence of the AmoA (Ammonia monooxygenase) gene for AOB and of the Nitrobacter was detected in the bioreactor samples. By PCR-DGGE, the sequenced bands showed high similarity with denitrifying bacteria, such as Pseudomonas, Limnobacter, Thauera, Rhodococcus, and Thiobacillus. Thus, the saturation of dissolved oxygen in the system resulted in improvement in the nitratation step and allowed detection of bacterial genera involved in the process.

Detecção e quantificação de bactérias resistentes aos antibióticos ampicilina e cloranfenicol em estações de tratamento de esgoto doméstico / Detection and quantification of bacteria resistant to ampicillin and chloranphenicol in domestic sewage treatment plants

RESUMO Estações de tratamento de esgotos (ETEs) estão entre as principais fontes de disseminação de bactérias resistentes a antibióticos (BRAs) e genes de resistência (GRAs) no ambiente. Este trabalho quantificou a ocorrência de bactérias resistentes aos antibióticos ampicilina e cloranfenicol no esgoto bruto (EB), no efluente tratado (ET) e no lodo de duas ETEs em escala plena por um período de nove meses. As unidades investigadas utilizavam os seguintes sistemas de tratamento: ETE-A, sistema de lodos ativados convencional; e a ETE-B, reatores anaeróbios (UASB) seguidos de filtros biológicos percoladores (FBP). Os resultados evidenciaram que a ETE-A foi mais eficiente na redução das concentrações de bactérias resistentes à ampicilina e ao cloranfenicol (cerca de 1,1 e 0,7 log10UFC.mL−1 de remoção, respectivamente), quando comparada com a ETE-B (0,5log10 UFC.mL−1 de remoção para as bactérias resistentes ao cloranfenicol e nenhuma remoção para as resistentes à ampicilina). As amostras de lodo, de ambas ETEs, apresentaram elevadas concentrações de bactérias heterotróficas totais — BHTs (4,8-7,6 log10UFC.mL−1) e de BRAs (3,0-6,3 log10UFC.mL−1). A maioria das cepas resistentes à ampicilina e ao cloranfenicol isoladas foi identificada como sendo da família Enterobacteriaceae. Algumas das espécies identificadas são bactérias potencialmente patogênicas, tais como: Klebsiella pneumoniae, Aeromonas hydrophila, Escherichia coli, Enterococcus faecium, Salmonella spp. Os resultados chamam a atenção para a disseminação de BRAs, potencialmente patogênicas, no meio ambiente a partir do efluente final (proveniente do tratamento secundário) das ETEs, independentemente do tipo de sistema adotado. Fica evidente que para reduzir significativamente a concentração das BRAs no ET, este deveria passar por tratamento adicional e desinfecção.

ABSTRACT Sewage treatment plants (STP) are among the main sources of dissemination of antibiotic-resistant bacteria (ARB) and antibiotic-resistance genes (ARG) into the environment. This work quantified the occurrence of cultivable ampicilin-resistant and chloramphenicol-resistant bacteria in raw sewage, treated effluent and sludge samples from two full-scale STP over nine months. The STP investigated used the following treatment systems: STP-A used conventional activated sludge system; and STP-B, anaerobic reactors (UASB) followed by percolating biological filters (PBF). Results showed that was more efficient in reducing the concentrations of ampicilin- and chloramphenicol-resistant bacteria (around 1.1 and 0.7 log10UFC.mL−1, respectively) when compared to STP-B (0.5 log10 UFC.mL−1 removal of cloramphenicol-resistant bacteria and no-removal of ampicilin-resistant bacteria). Sludge samples, from both STP, showed high concentrations of total heterotrophic bacteria (THB; 4.8-7.6 log10UFC.mL−1) and ARB (3.0-6.3 log10UFC.mL−1). Most of the isolated ampicilin- and chloramphenicol-resistant strains were identified as members of the Enterobacteriaceae family. Some of the identified species are potential pathogenic bacteria, such as Klebsiella pneumoniae, Aeromonas hydrophila, Escherichia coli, Enterococcus faecium, Salmonella spp. These results call attention to the spread of ARB, potentially pathogenic, in the environment from the final effluent (from secondary effluent) on the STP, regardless of the type of system adopted. It is evident that in order to significantly reduce the concentration of ARB in the treated effluent, it should undergo additional treatment and disinfection.

Evaluation of nitrogen removal and the microbial community in a submerged aerated biological filter (SABF), secondary decanters (SD), and horizontal subsurface flow constructed wetlands (HSSF-CW) for the treatment of kennel effluent.

To ensure microbial activity and a reaction equilibrium with efficiency and energy saving, it is important to know the factors that influence microbiological nitrogen removal in wastewater. Thus, it was investigated the microorganisms and their products involved in the treatment of kennel effluents operated with different aeration times, phase 1 (7 h of continuous daily aeration), phase 2 (5 h of continuous daily aeration), and phase 3 (intermittent aeration every 2 h), monitoring chemical and physical parameters weekly, monthly microbiological, and qualitative and quantitative microbiological analyzes at the end of each applied aeration phase. The results showed a higher mean growth of nitrifying bacteria (NB) (106) and denitrifying bacteria (DB) (1022) in phase with intermittent aeration, in which better total nitrogen (TN) removal performance, with 33%, was achieved, against 21% in phase 1 and 17% in phase 2, due to the longer aeration time and lower carbon/nitrogen ratio (15.7), compared with the other phases. The presence of ammonia-oxidizing bacteria (AOB), the genus Nitrobacter nitrite-oxidizing bacteria (NOB), and DB were detected by PCR with specific primers at all phases. The analysis performed by 16S-rRNA DGGE revealed the genres Thauera at all phases; Betaproteobacteria and Acidovorax in phase 3; Azoarcus in phases 2 and 3; Clostridium, Bacillus, Lactobacillus, Turicibacter, Rhodopseudomonas, and Saccharibacteria in phase 1, which are related to the nitrogen removal, most of them by denitrifying. It is concluded that, with the characterization of the microbial community and the analysis of nitrogen compounds, it was determined, consistently, that the studied treatment system has microbiological capacity to remove TN, with the phase 3 aeration strategy, by simultaneous nitrification and denitrification (SND). Due to the high density of DB, most of the nitrification occurred by heterotrophic nitrification-aerobic. And denitrification occurred by heterotrophic and autotrophic forms, since the higher rate of oxygen application did not harm the DB. Therefore, the aeration and carbon conditions in phase 3 favored the activity of the microorganisms involved in these different routes. It is considered that, in order to increase autotrophic nitrification-aerobic, it is necessary to exhaust the volume of sludge in the secondary settlers (SD), further reducing the carbon/nitrogen ratio, through more frequent cleaning, whose periodicity should be the object of further studies. Graphical abstract.

Effect of alkaline treatment on pathogens, bacterial community and antibiotic resistance genes in different sewage sludges for potential agriculture use.

Alkaline treatment is widely used to reduce pathogens in sewage sludge in developing countries and guarantee that it is safe for use in agriculture. The aim of this study was to investigate the effect of alkaline treatment applied to waste-activated (WAS) and Upflow Anaerobic Sludge Blanket (UASB)-sludge on the bacterial community, pathogens (viable helminths eggs and Salmonella spp), and antibiotic resistance genes (ARG). The bacterial community structure was examined through denaturing gel gradient electrophoresis (DGGE), targeting 16S rRNA genes. Polymerase chain reaction (PCR) was applied to evaluate the presence of several ARGs. The conducted alkaline experiment consisted of adding hydrated lime (Ca(OH)2) to sewage sludges. Samples were taken before and after 2, 24, 48, and 72 hours of treatment. Alkaline treatment changed considerably the bacterial community structure and after 24 hours, shifts in bacterial profiles were more pronounced in the UASB sludge sample than in WAS. Some bacteria remained under extreme pH conditions (pH > 12), such as Azospira oryzae and Dechloromonas denitrificans in the WAS samples, and Geothrix and Geobacter in the UASB sludge samples. The values of pathogens and indicators in the sludge after 24 hours of alkaline treatment meet sanitary law regulations and thus the sludges could have the potential to agricultural distribution. It is important to highlight that ARG, which are not currently present in sanitary regulations, were detected in the sludge samples after the alkaline treatment, which could be a concern for human health.

Nitrogen removal from food waste digestate using partial nitritation-anammox process: Effect of different aeration strategies on performance and microbial community dynamics.

The feasibility of employing anammox and partial nitritation-anammox (PN/A) processes for nitrogen removal from food waste (FW) digestate was investigated in this study. The effects of different aeration strategies on the microbial community were also investigated. To achieve this, after anammox enrichment (Phase 1), the reactor was fed with digestate supplemented with nitrite (Phase 2), and subsequently different aeration strategies were evaluated to establish PN/A. Aeration strategies with high anoxic periods (30 and 45 min) in relation to aerobic periods (15 min) coupled with low air flow rates (0.026 L  min-1. Lreator-1) were found to be better for establishing PN/A, as coefficients of produced nitrate/removed ammonium were closer to those reported previously (0.17 and 0.21). Aeration conditions considerably altered the microbial community. Candidatus Brocadia was replaced by Candidatus Jettenia, after the first aeration strategies. These results support the feasibility of FW digestate treatment using anammox and PN/A processes and provide a better understanding of the effect of aeration on microbial dynamics in PN/A reactors.

Enhanced biodiesel industry wastewater treatment via a hybrid MBBR combined with advanced oxidation processes: analysis of active microbiota and toxicity removal.

In the present study, a multistage route is proposed for the treatment of biodiesel industry wastewater (BWW) containing around 1000 mg L-1 of total organic carbon (TOC), 3500 mg L-1 of chemical oxygen demand (COD), and 1325 mg L-1 of oil and grease. Initially, BWW aerobic biodegradability was assessed via Zhan-Wellens biodegradability test to confirm the appropriate treatment route. Then, a hybrid moving bed bioreactor (MBBR) system was chosen as the first treatment stage. The hybrid MBBR achieved 69 and 68% removal of COD and TOC removals, respectively, and provided great conditions for biomass growth. The bacterial community present in the hybrid MBBR was investigated by PCR-DGGE and potential biodegraders were identified such as: members of Desulfuromonadales, Nocardioidaceae and Pseudomonadaceae. Since biodegradation in the hybrid MBBR alone was unable to meet quality requirements, advanced oxidation processes, such as Fenton and photo-Fenton, were optimized for application as additional treatment stages. Physicochemical properties and acute toxicity of BWW were analyzed after the multistage routes: hybrid MBBR + Fenton, hybrid MBBR + photo-Fenton and hybrid MBBR + UV-C254nm/H2O2. Hybrid MBBR + Fenton or photo-Fenton showed overall COD removal efficiencies greater than 95% and removed acute toxicity, thus being appropriate integrated routes for the treatment of real BWW. Graphical abstract ᅟ.

Effect of temperature on microbial diversity and nitrogen removal performance of an anammox reactor treating anaerobically pretreated municipal wastewater.

The effects of temperature reduction (from 35 °C to 20 °C) on nitrogen removal performance and microbial diversity of an anammox sequencing batch reactor were evaluated. The reactor was fed for 148 days with anaerobically pretreated municipal wastewater amended with nitrite. On average, removal efficiencies of ammonium and nitrite were high (96%) during the enrichment period and phases 1 (at 35 °C) and 2 (at 25 °C), and slightly decreased (to 90%) when the reactor was operated at 20 °C. Deep sequencing analysis revealed that microbial community structure changed with temperature decrease. Anammox bacteria (Ca. Brocadia and Ca. Anammoximicrobium) and denitrifiers (Burkholderiales, Myxococcales, Rhodocyclales, Xanthomonadales, and Pseudomonadales) were favoured when the temperature was lowered from 35 °C to 25 °C, while Anaerolineales and Clostridiales were negatively affected. The results support the feasibility of using the anammox process for mainstream nitrogen removal from anaerobically pretreated municipal wastewater at typical tropical temperatures.

Anammox for nitrogen removal from anaerobically pre-treated municipal wastewater: Effect of COD/N ratios on process performance and bacterial community structure.

Long-term effects of COD/N ratios on the nitrogen removal performance and bacterial community of an anammox reactor were evaluated by adding a synthetic medium (with glucose) and real anaerobic effluent to a SBR. At a COD/N ratio of 2.8 (COD, 390mg·L(-1)) ammonium removal efficiency was 66%, while nitrite removal remained high (99%). However, at a COD/N ratio of 5.0 (COD, 300mg·L(-1)), ammonium and nitrite removal efficiencies were high (84% and 99%, respectively). High COD, nitrite, and ammonium removal efficiencies (80%, 90% and 95%, respectively) were obtained on adding anaerobically pre-treated municipal wastewater (with nitrite) to the reactor. DGGE revealed that the addition of anaerobic effluent changed the bacterial community structure and selected for DNA sequences related to Brocadia sinica and Chloroflexi. Adding glucose and anaerobic effluent increased denitrifiers concentration threefold. Thus, the possibility of using the anammox process to remove nitrogen from anaerobically pre-treated municipal wastewater was demonstrated.

Impact of inocula and operating conditions on the microbial community structure of two anammox reactors.

The microbial community structure of the biomass selected in two distinctly inoculated anaerobic oxidation of ammonium (anammox) reactors was investigated and compared with the help of data obtained from 454-pyrosequencing analyses. The anammox reactors were operated for 550 days and seeded with different sludges: sediment from a constructed wetland (reactor I) and biomass from an aerated lagoon part of the oil-refinery wastewater treatment plant (reactor II). The anammox diversity in the inocula was evaluated by 16S rRNA gene-cloning analysis. The diversity of anammox bacteria was greater in the sludge from the oil-refinery (three of the five known genera of anammox were detected) than in the wetland sludge, in which only Candidatus Brocadia was observed. Pyrosequencing analysis demonstrated that the community enriched in both reactors had differing compositions despite the nearly similar operational conditions applied. The dominant phyla detected in both reactors were Proteobacteria, Chloroflexi, Planctomycetes, and Acidobacteria. The phylum Bacteroidetes, which is frequently observed in anammox reactors, was not detected. However, Acidobacteria and GN04 phyla were observed for the first time, suggesting their importance for this process. Our results suggest that, under similar operational conditions, anammox populations (Ca. Brocadia sinica and Ca. Brocadia sp. 40) were selected in both reactors despite the differences between the two initial inocula. Taken together, these results indicated that the type of inoculum and the culture conditions are key determinants of the general microbial composition of the biomass produced in the reactors. Operational conditions alone might play an important role in anammox selection.

Effect of phenol on the nitrogen removal performance and microbial community structure and composition of an anammox reactor.

The effects of phenol on the nitrogen removal performance of a sequencing batch reactor (SBR) with anammox activity and on the microbial community within the reactor were evaluated. A phenol concentration of 300 mg L(-1) reduced the ammonium-nitrogen removal efficiency of the SBR from 96.5% to 47%. The addition of phenol changed the microbial community structure and composition considerably, as shown by denaturing gradient gel electrophoresis and 454 pyrosequencing of 16S rRNA genes. Some phyla, such as Proteobacteria, Verrucomicrobia, and Firmicutes, increased in abundance, whereas others, such as Acidobacteria, Chloroflexi, Planctomycetes, GN04, WS3, and NKB19, decreased. The diversity of the anammox bacteria was also affected by phenol: sequences related to Candidatus Brocadia fulgida were no longer detected, whereas sequences related to Ca. Brocadia sp. 40 and Ca. Jettenia asiatica persisted. These results indicate that phenol adversely affects anammox metabolism and changes the bacterial community within the anammox reactor.