Nanonization and Deformable Behavior of Fattigated Peptide Drug in Mucoadhesive Buccal Films.

This study was tasked with the design of mucoadhesive buccal films (MBFs) containing a peptide drug, leuprolide (LEU), or its diverse nanoparticles (NPs), for enhanced membrane permeability via self-assembled nanonization and deformable behavior. An LEU-oleic acid conjugate (LOC) and its self-assembled NPs (LON) were developed. Additionally, a deformable variant of LON (d-LON) was originally developed by incorporating l-α-phosphatidylcholine into LON as an edge activator. The physicochemical properties of LON and d-LON, encompassing particle size, zeta potential, and deformability index (DI), were evaluated. MBFs containing LEU, LOC, and NPs (LON, d-LON) were prepared using the solvent casting method by varying the ratio of Eudragit RLPO and hydroxypropyl methylcellulose, with propylene glycol used as a plasticizer. The optimization of MBF formulations was based on their physicochemical properties, including in vitro residence time, dissolution, and permeability. The dissolution results demonstrated that the conjugation of oleic acid to LEU exhibited a more sustained LEU release pattern by cleaving the ester bond of the conjugate, as compared to the native LEU, with reduced variability. Moreover, the LOC and its self-assembled NPs (LON, d-LON), equivalent to 1 mg LEU doses in MBF, exhibited an amorphous state and demonstrated better permeability through the nanonization process than LEU alone, regardless of membrane types. The incorporation of lauroyl-L-carnitine into the films as a permeation enhancer synergistically augmented drug permeability. Most importantly, the d-LON-loaded buccal films showed the highest permeability, due to the deformability of NPs. Overall, MBF-containing peptide NPs and permeation enhancers have the potential to replace parenteral LEU administration by improving LEU druggability and patient compliance.

Self-assembled nanonization of fatty acid-conjugated vaccine antigen for enhanced thermal stability.

The aim of this study was to evaluate the enhanced thermal stability and physicochemical properties of fattigated vaccine antigens. High molecular weight influenza hemagglutinin (Heg) was used as a model antigen because of low heat stability requiring cold chamber. Heg was conjugated with long-chain oleic acid (C18) and short-chain 3-decenoic acid (C10) to prepare fattigated Heg. Circular dichroism analysis revealed no significant changes in the three-dimensional structure post-conjugation. In the liquid state, the fattigated Heg was self-assembled into nanoparticles (NPs) due to its amphiphilic nature, with sizes of 136.27 ±â€¯12.78 nm for oleic acid-conjugated Heg (HOC) and 88.73 ±â€¯3.27 nm for 3-decenoic acid-conjugated Heg (HDC). Accelerated thermal stability studies at 60 °C for 7 days demonstrated that fattigated Heg exhibited higher thermal stability than Heg in various liquid or solid states. The longer-chained HOC showed better thermal stability than HDC in the liquid state, attributed to increased hydrophobic interactions during self-assembly. In bio-mimicking liquid states at 37 °C, HOC exhibited higher thermal stability than Heg. Furthermore, solid-state HOC with cryoprotectants (trehalose, mannitol, and Tween® 80) had significantly increased thermal stability due to reduced exposure of protein surface area via nanonization behavior. The current fattigation platform could be a promising strategy for developing thermostable nano vaccines of heat-labile vaccine antigens.

Low-Intensity Statin Plus Ezetimibe Versus Moderate-Intensity Statin for Primary Prevention: A Population-Based Retrospective Cohort Study in Asian Population.

BACKGROUND: While moderate-intensity statin therapy is recommended for primary prevention, statins may not be utilized at a recommended intensity due to dose-dependent adverse events, especially in an Asian population. However, evidence supporting the use of low-intensity statins in primary prevention is limited. OBJECTIVE: We sought to compare clinical outcomes between a low-intensity statin plus ezetimibe and a moderate-intensity statin for primary prevention. METHODS: This population-based retrospective cohort study used the Korean nationwide claims database (2002-2019). We included adults without atherosclerotic cardiovascular diseases who received moderate-intensity statins or low-intensity statins plus ezetimibe. The primary outcome was a composite of all-cause mortality, myocardial infarction, and ischemic stroke. The safety outcomes were liver and muscle injuries and new-onset diabetes mellitus (DM). We used standardized inverse probability of treatment weighting (sIPTW) and propensity score matching (PSM). RESULTS: In the sIPTW model, 1717 and 36 683 patients used a low-intensity statin plus ezetimibe and a moderate-intensity statin, respectively. In the PSM model, each group included 1687 patients. Compared with moderate-intensity statin use, low-intensity statin plus ezetimibe use showed similar risks of the primary outcome (hazard ratio [HR] = 0.92, 95% CI = 0.81-1.12 in sIPTW and HR = 1.16, 95% CI = 0.87-1.56 in PSM model). Low-intensity statin plus ezetimibe use was associated with decreased risks of liver and muscle injuries (subHR [sHR] = 0.84, 95% CI = 0.74-0.96 and sHR = 0.87, 95% CI = 0.77-0.97 in sIPTW; sHR = 0.84, 95% CI = 0.72, 0.96 and sHR = 0.82, 95% CI = 0.72-0.94 in PSM model, respectively). For new-onset DM and hospitalization of liver and muscle injuries, no difference was observed. CONCLUSION AND RELEVANCE: Low-intensity statin plus ezetimibe may be an alternative to moderate-intensity statin for primary prevention. Our findings provide evidence on safety and efficacy of statin therapy in Asian population.

Roles of Fatty Acid Chain Length and Enzyme-Oriented Drug Controlled Release from pH-Triggering Self-Assembled Fatty Acid Conjugated Quetiapine Nanosuspensions.

Background: Quetiapine (QTP) is a first-line antipsychotic drug, but its therapeutic druggability and patient adherence were limited due to high oral dose strength, low bioavailability and physicochemical/biopharmaceutical issues. Purpose: To investigate the roles of fatty acid chain length and enzyme-oriented QTP controlled release from pH-triggering self-assembled fatty acid conjugated QTP nanosuspensions (NSPs). Methods: QTP was conjugated with different chain length fatty acids (C10-decanoic acid, C14-myristic acid, C18-stearic acid) to obtain QTP-fatty acid conjugates (QFCs: QD, QM, QS) by exploiting 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/4-dimethylaminopyridine (EDC/DMAP) conjugation chemistry. Then, the solubility, partitioning coefficient (log P), cell viability and cleavage kinetics of QFCs were evaluated. The pH-triggering self-assembled behaviors of QFCs to form QTP-fatty acid NSPs (QDN, QMN, QSN) by varying pH, QFC concentration and proton-to-QTP ratios were characterized. The morphological images, critical micelle concentration (CMC), physicochemical properties and enzyme-oriented QTP controlled release of NSPs were examined. Results: Three QFCs were synthesized with different chain length fatty acids from QTP after desalting fumarate from QTP fumarate. The pH, QFC concentration and proton-to-quetiapine molar ratio could influence physicochemical properties and nanonization behaviors of QFCs. All three QFCs showed no effect on the viability of myoblast cells. The pH-triggering self-assembly of amphiphilic QFCs to form nanoparticles (NPs) occurred as the amine moiety of QTP was readily ionized in a strongly acidic environment (pH 1.2). Interestingly, the longer the fatty acid chain length, the lower water solubility, the higher log P (lipophilicity) and the smaller NP particle size were observed. The conversion rate of QFCs to liberate QTP by esterase in human plasma and liver S9 fractions was also inversely proportional to the fatty acid carbon chain length. Interestingly, the freeze-dried QMN showed the esterase-oriented controlled release of QTP over one month, unlike the initial burst release of QDN or the slowly delayed release pattern of QSN. Conclusion: A new pH-triggering self-assembled nanonization platform was developed using different chain length fatty acid conjugated QTP in low pH environment. By varying fatty acid chain length, the enzyme-oriented QTP controlled release dosage form was challenged to enhance the therapeutic effectiveness of QTP.

Polyelectrolyte-based solid dispersions for enhanced dissolution and pH-Independent controlled release of sildenafil citrate.

The aim of this study was to design a novel matrix tablet with enhanced dissolution and pH-independent controlled release of sildenafil citrate (SIL), a drug with pH-dependent solubility, by using solid dispersions (SDs) and polyelectrostatic interactions. SIL-loaded SDs were prepared using various polymeric carriers such as poloxamer 188, poloxamer 407, Soluplus®, polyvinylpyrrolidone (PVP) K 12, and PVP K 17 by the solvent evaporation method. Among these polymers, Soluplus® was found to be the most effective in SDs for enhancing the drug dissolution over 6 h in pH 6.8 intestinal fluid. SIL was well dispersed in Soluplus®-based SDs in an amorphous form. When the Soluplus®-based SDs were added in the tablet containing positively charged chitosan and negatively charged Eudragit® L100, the drug release rate was further modulated in a controlled manner. The charge density of the tablet was higher at pH 6.8 than at pH 1.2 due to the polyelectrostatic interaction between chitosan and Eudragit® L100. This interaction could provide a pH-independent controlled release of SIL. Our study demonstrates that a combinatory approach of Soluplus®-based SDs and polyelectrostatic interactions can improve the dissolution and pH-independent release performance of SIL. This approach could be a promising pharmaceutical strategy to design a matrix tablet of poorly water-soluble drugs for the enhanced bioavailability.

Investigation of Cannabinoid Acid/Cyclodextrin Inclusion Complex for Improving Physicochemical and Biological Performance.

This study aimed to investigate the enhancement of cannabinoid acid solubility and stability through the formation of a cannabinoid acid/cyclodextrin (CD) inclusion complex. Two cannabinoid acids, tetrahydro-cannabinolic acid (THCA) and cannabidiolic acid (CBDA), were selected as a model drug along with five types of CD: α-cyclodextrin (α-CD), ß-cyclodextrin (ß-CD), γ-cyclodextrin (γ-CD), hydroxypropyl-ß-cyclodextrin (HP-ß-CD), and methylated-ß-cyclodextrin (M-ß-CD). Phase solubility studies were conducted using various types of CD to determine the complex stoichiometry. The preparation methods of the CD inclusion complex were optimized by adjusting the loading pH solution and the drying processes (spray-drying, freeze-drying, spray-freeze-drying). The drying process of the cannabinoid acid/M-ß-CD inclusion complex was further optimized through the spray-freeze-drying method. These CD complexes were characterized using solubility determination, differential scanning calorimetry (DSC), field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and 1H NMR spectroscopy. DSC, XRD, and FE-SEM studies confirmed the non-crystalline state of the cannabinoid acid/CD inclusion complex. The permeation of THCA or CBDA from the M-ß-CD spray-freeze-dried inclusion complex was highly improved compared to those of cannabis ethanolic extracts under simulated physiological conditions. The stability of the cannabinoid acid/M-ß-CD inclusion complex was maintained for 7 days in a simulated physiological condition. Furthermore, the minimum inhibitory concentration of cannabinoid acid/M-ß-CD inclusion complex had superior anti-cancer activity in MCF-7 breast cancer cell lines compared to cannabinoid acid alone. The improved physicochemical and biological performances indicated that these CD inclusion complexes could provide a promising option for loading lipophilic cannabinoids in cannabis-derived drug products.

Cellular Efficacy of Fattigated Nanoparticles and Real-Time ROS Occurrence Using Microfluidic Hepatocarcinoma Chip System: Effect of Anticancer Drug Solubility and Shear Stress.

The objective of this study was to evaluate the effectiveness of organ-on-chip system investigating simultaneous cellular efficacy and real-time reactive oxygen species (ROS) occurrence of anticancer drug-loaded nanoparticles (NPs) using hepatocarcinoma cells (HepG2) chip system under static and hepatomimicking shear stress conditions (5 dyne/cm2). Then, the role of hepatomimetic shear stress exposed to HepG2 and drug solubility were compared. The highly soluble doxorubicin (DOX) and poorly soluble paclitaxel (PTX) were chosen. Fattigated NPs (AONs) were formed via self-assembly of amphiphilic albumin (HSA)-oleic acid conjugate (AOC). Then, drug-loaded AONs (DOX-AON or PTX-AON) were exposed to a serum-free HepG2 medium at 37 °C and 5% carbon dioxide for 24 h using a real-time ROS sensor chip-based microfluidic system. The cellular efficacy and simultaneous ROS occurrence of free drugs and drug-loaded AONs were compared. The cellular efficacy of drug-loaded AONs varied in a dose-dependent manner and were consistently correlated with real-time of ROS occurrence. Drug-loaded AONs increased the intracellular fluorescence intensity and decreased the cellular efficacy compared to free drugs under dynamic conditions. The half-maximal inhibitory concentration (IC50) values of free DOX (13.4 µg/mL) and PTX (54.44 µg/mL) under static conditions decreased to 11.79 and 38.43 µg/mL, respectively, under dynamic conditions. Furthermore, DOX- and PTX-AONs showed highly decreased IC50 values of 5.613 and 21.86 µg/mL, respectively, as compared to free drugs under dynamic conditions. It was evident that cellular efficacy and real-time ROS occurrence were well-correlated and highly dependent on the drug-loaded nanostructure, drug solubility and physiological shear stress.

Physicochemical and Biopharmaceutical Controllability of New Self-Assembled Fatty Acid Conjugated Leuprolide for the Enhanced Anticancer Activity.

Background: Leuprolide (LEU), a synthetic nonapeptide analog of naturally occurring gonadotropin-releasing hormone (GnRH), could exert a direct inhibitory activity on the proliferation of prostate cancer cells. However, the short half-life in blood and the biopharmaceutical problem of LEU limit this anticancer activity. Purpose: To improve its druggability for improving anticancer activity, the amine-group targeted LEU was conjugated with different chain lengths of saturated fatty acids (FAs). Methods: LEU-fatty acid conjugates (LFCs) were synthesized by exploiting N-hydroxysuccinimidyl (NHS) conjugation chemistry. The physicochemical properties and the self-assembled behaviors of the conjugates were extensively investigated. The in vitro anticancer activity of three LFCs was extensively studied in both 2D monolayer and 3D spheroid culture models of a prostate cancer cell line, PC3. Results: Three LFCs could be readily self-assembled into nanoparticles (LFNs) with a small size of around 100 nm, positive charges, and exhibited greater permeability rates compared to the same concentration of LEU, excluding LSN. The chain length of FA in conjugate was positively related to the selectivity index between cancer cells and non-cancerous cell lines. All LFCs showed a superior direct antiproliferative effect on cancer cells in the following order: LSC (98.9%) > LPC (86.7%) > LLC (75.0%) > LEU (8.9%) after repeat daily of the same dose strength of LEU for 4 days. In addition, the 3D spheroid model study indicates that all LFCs with a one-time treatment performed a long-acting inhibitory effect on tumor growth as compared to LEU after 7 days. Conclusion: The conjugation of LEU with different chain lengths of FAs could provide a novel strategy to improve peptide stability and exert an additional superior direct inhibitory effect for the treatment of several hormone-responsive tumor systems using therapeutic peptides.

Mucoadhesive buccal tablet of leuprolide and its fatty acid conjugate: Design, in vitro evaluation and formulation strategies.

This study aimed to design mucoadhesive buccal tablets of leuprolide (LEU) and to manufacture and evaluate the properties of buccal tablets containing LEU-oleic acid conjugate (LOC) and self-assembled LEU-oleic acid nanoparticles (LON), which were developed in a previous study. Hydroxypropyl methylcellulose (HPMC 4000) was used as the mucoadhesive polymer, and tablets were prepared by direct compression. The formulations were characterized by weight, content uniformity, thickness, hardness, swelling index, disintegration time, mucoadhesion time, and drug release. The chosen formulation maintained an adhesion time of up to 6.43 h and a disintegration time of 4.10 h. Drug stability in the mucoadhesive tablets was confirmed after 2 h of storage in human mimic saliva (Phosphate buffer solution pH 6.8). Furthermore, the designed LEU formulation and the LOC and LON developed in a previous study were prepared as buccal tablets and compared. In the dissolution and permeation studies, LON-loaded buccal tablets showed the highest permeation rate. This study suggests that mucoadhesive buccal tablets containing self-assembled LON may effectively increase the medication adherence for pediatric and geriatric patients by improving the bioavailability and permeation rate of LEU.

Clinical outcomes and predictors of a gap in direct-acting oral anticoagulant therapy in the elderly: A time-varying analysis of a nationwide cohort study.

INTRODUCTION: As direct-acting oral anticoagulants (DOACs) have short half-lives of around 12 h, even a short gap in DOAC therapy may diminish anticoagulation effects, increasing risks of adverse clinical outcomes. We aimed to evaluate clinical consequences of a gap in DOAC therapy with atrial fibrillation (AF) and to identify its potential predictors. MATERIALS AND METHODS: In this retrospective cohort study, we included DOAC users aged over 65 years with AF from the 2018 Korean nationwide claims database. We defined a gap in DOAC therapy as no claim for a DOAC one or more days after the due date of a refill prescription. We used a time-varying-analysis method. The primary outcome was a composite of death and thrombotic events including ischemic stroke/transient ischemic attack or systemic embolism. Potential predictors of a gap included sociodemographic and clinical factors. RESULTS AND CONCLUSIONS: Among 11,042 DOAC users, 4857 (44.0 %) patients had at least one gap. Standard national health insurance, non-metropolitan locations of medical institutions, history of liver disease, chronic obstructive pulmonary disease, cancer, or dementia, and use of diuretics or non-oral agents were associated with increased risks of a gap. In contrast, history of hypertension, ischemic heart disease, or dyslipidemia were associated with a decreased risk of a gap. A short gap in DOAC therapy was significantly associated with a higher risk of the primary outcome compared to no gap (hazard ratio 4.04, 95 % confidence interval 2.95-5.52). The predictors could be utilized to identify at-risk patients to provide additional support to prevent a gap.

Transforming pharmaceutical education: A needs-based global analysis for policy development.

Background: A needs-based approach is desirable for the transformation of pharmaceutical education, and to link pharmaceutical education with the health needs of populations and national priorities. There are varying levels of data in the literature on the status of pharmaceutical education in all six World Health Organization (WHO) regions, especially in the context of needs identification and evidence-based policy interventions. The framework for this study was the FIP Development Goals. Objectives: The aim of the study was to develop evidence-based policies through a needs-based approach for pharmaceutical education transformation nationally, regionally and globally by addressing the following objectives: 1. Identify global and regional needs in pharmaceutical education, through a regional SWOT analysis and prioritization of FIP development goals; 2. Develop valid and credible regional roadmaps for pharmaceutical education advancement according to the identified prioritized goals and 3. Develop a global call to action as a policy intervention for advancing pharmaceutical education. Methods: This study was conducted between 2020 and 2021 using a mixed methods approach. Surveys of higher education institutions and a series of qualitative interviews were conducted with national professional leadership organizations, with further regional workshops having 284 participants recruited from the International Pharmaceutical Federation (FIP) membership base, spanning all six WHO regions. Results: Eleven out of 21 FIP DGs were identified as priorities for regional roadmaps and FIP DG 1 (Academic capacity) was identified as a priority in four regions. All regions had distinctive results with an area of commonality between them. There were common weaknesses in the adoption of competency-based education and inter-professional education. Conclusions: It is critical for every country and region to develop needs- and evidence-based policies for the transformation of pharmaceutical education, for which FIP DGs provide a systematic framework.

Dual thermal stabilizing effects of xanthan gums via glycosylation and hydrogen bonding and in vivo human bioavailability of desmopressin in orodispersible film.

Desmopressin acetate (DDAVP), a nonapeptide drug, is easily destroyed by heat in the manufacturing process of orodispersible film (ODF). A new challenging study was conducted to improve thermal stability through glycosylation and hydrogen bonding using carbohydrate gums (agar, arabic gum, carrageenan, xanthan gum) using the solvent casting method. Among gum types, xanthan gum strongly showed dual stabilizing effects of DDAVP via covalent glycosylation and hydrogen bonding, minimizing total impurities and optimizing physicochemical properties of ODF under accelerated conditions for six months. The optimized ODF formulation (O-DDAVP ODF) at a DDAVP and xanthan gum ratio of 1:1.5 had a pharmaceutically equivalent dissolution profile as compared with a commercial 0.2 mg commercial Minirin® tablet in four different media: pH 1.2, pH 4.0, and pH 6.8 buffers and deionized water. Furthermore, O-DDAVP ODF showed in vivo bioequivalence to Minirin® tablets in healthy human volunteers. Glycosylation-oriented stabilization of peptide drug using pharmaceutically active excipients against thermal denaturation could be challenged to design patient-friendly ODF.

Rizatriptan-Loaded Oral Fast Dissolving Films: Design and Characterizations.

Rizatriptan (RZT) is an efficient anti-migraine drug which belongs to the class of selective 5 HT (1B/1D) serotonin receptor agonists. Nevertheless, RZT elicits several adverse effects and RZT nasal sprays have a limited half-life, requiring repeated doses that could cause patient noncompliance or harm to the nasopharynx and cilia. The current research aimed to develop orally disintegrating films (ODFs) of RZT employing maltodextrin (MTX) and pullulan (PUL) as film-forming polymers, as well as propylene glycol (PG) as a plasticizer. The ODFs were prepared by solvent casting method (SCM). The technique was optimized using Box-Behnken design (BBD), contemplating the ratios of PUL: MTX and different levels of PG (%) as factor variables. The influence of these factors was systematically analyzed on the selected dependent variables, including film thickness, disintegration time (D-time), folding endurance (FE), tensile strength (TS), percent elongation (%E), moisture content (%), and water uptake (%). In addition, the surface morphology, solid state analysis, drug content uniformity (%), drug release (%), and pH of the RZT-ODFs were also studied. The results demonstrated a satisfactory stable RZT-ODFs formulation that exhibited surface homogeneity and amorphous RZT in films with no discernible interactions between the model drug and polymeric materials. The optimized film showed a rapid D-time of 16 s and remarkable mechanical features. The in vitro dissolution kinetics showed that 100% RZT was released from optimized film compared to 61% RZT released from conventional RZT formulation in the initial 5 min. An animal pharmacokinetic (PK) investigation revealed that RZT-ODFs had a shorter time to achieve peak plasma concentration (Tmax), a higher maximum plasma concentration (Cmax), and area under the curve (AUC0-t) than traditional oral mini capsules. These findings proposed a progressive approach for developing anti-migraine drugs that could be useful in reducing the complications of dysphagia in geriatric and pediatric sufferers.

Determination of Leuprolide-Fatty Acid Conjugate in Rat Plasma Using LC-MS/MS and Its Pharmacokinetics after Subcutaneous Administration in Rats.

Leuprolide is a synthetic nonapeptide drug (pyroGlu-His-Trp-Ser-Tyr-d-Leu-Leu-Arg-Pro-NHEt) that acts as a gonadotropin-releasing hormone agonist. The continuous administration of therapeutic doses of leuprolide inhibits gonadotropin secretion, which is used in androgen-deprivation therapy for the treatment of advanced prostate cancer, central precocious puberty, endometriosis, uterine fibroids, and other sex-hormone-related conditions. To improve the pharmacokinetic properties of peptide drugs, a fatty acid was conjugated with leuprolide for long-term action. In this study, we developed a simple ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for the simultaneous determination of leuprolide and leuprolide-oleic acid conjugate (LOC) levels. The developed method was validated in terms of linearity, precision, accuracy, recovery, matrix effect, and stability according to the US Food and Drug Administration guidelines, and the parameters were within acceptable limits. Subsequently, the pharmacokinetics of leuprolide and LOCs were evaluated. In vivo rat subcutaneous studies revealed that conjugation with fatty acids significantly altered the pharmacokinetics of leuprolide. After the subcutaneous administration of fatty-acid-conjugated leuprolide, the mean absorption time and half-life were prolonged. To the best of our knowledge, this is the first study showing the effects of fatty acid conjugates on the pharmacokinetics of leuprolide using a newly developed UPLC-MS/MS method for the simultaneous quantification of leuprolide and LOCs.

Investigation of Patient-Centric 3D-Printed Orodispersible Films Containing Amorphous Aripiprazole.

The objective of this study was to design and evaluate an orodispersible film (ODF) composed of aripiprazole (ARP), prepared using a conventional solvent casting technique, and to fuse a three-dimensional (3D) printing technique with a hot-melt extrusion (HME) filament. Klucel® LF (hydroxypropyl cellulose, HPC) and PE-05JPS® (polyvinyl alcohol, PVA) were used as backbone polymers for 3D printing and solvent casting. HPC-, PVA-, and ARP-loaded filaments were applied for 3D printing using HME. The physicochemical and mechanical properties of the 3D printing filaments and films were optimized based on the composition of the polymers and the processing parameters. The crystalline states of drug and drug-loaded formulations were investigated using differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD). The dissolution and disintegration of the 3D-printed films were faster than those of solvent-cast films. HPC-3D printed film was fully disintegrated within 45 ± 3.5 s. The dissolution rate of HPC films reached 80% within 30 min at pH 1.2 and pH 4.0 USP buffer. There was a difference in the dissolution rate of about 5 to 10% compared to PVA films at the same sampling time. The root mean square of the roughness (Rq) values of each sample were evaluated using atomic force microscopy. The higher the Rq value, the rougher the surface, and the larger the surface area, the more salivary fluid penetrated the film, resulting in faster drug release and disintegration. Specifically, The HPC 3D-printed film showed the highest Rq value (102.868 nm) and average surface roughness (85.007 nm). The puncture strength of 3D-printed films had desirable strength with HPC (0.65 ± 0.27 N/mm2) and PVA (0.93 ± 0.15 N/mm2) to prevent deformation compared to those of marketed film products (over 0.34 N/mm2). In conclusion, combining polymer selection and 3D printing technology could innovatively design ODFs composed of ARP to solve the unmet medical needs of psychiatric patients.

Hydroxyl Group-Targeted Conjugate and Its Self-Assembled Nanoparticle of Peptide Drug: Effect of Degree of Saturation of Fatty Acids and Modification of Physicochemical Properties.

Purpose: To conjugate different degree of saturation of C18 fatty acids (stearic acid, oleic acid, and linoleic acid) with the hydroxyl groups of leuprolide acetate (LEU acetate) and to investigate the controlled release and enhanced permeability through self-assembled nanoparticles (L18FNs). Methods: Yamaguchi esterification with benzoyl chloride and DMAP (4-Dimethylaminopyridine) allowed the conjugation of the fatty acid to the hydroxyl group of LEU. The three conjugates were then designated as stearic acid-conjugated LEU, LSC, oleic acid-conjugated LEU, LOC, and linoleic acid-conjugated LEU, LLC, respectively. The conjugates (L18FCs) were purified using preparative HPLC (Prep-HPLC) and identified through various instrumental analyses. Results: The zeta potential, particle size, and morphology of each L18FNs were evaluated. In the case of LSNs, the zeta potential value was relatively low and the particle size was larger than LONs and LLNs owing to the higher hydrophobicity of saturated fatty chain, while the LLNs showed a higher zeta potential and smaller particle size. In human plasma, LLC showed the fastest degradation rate with the highest accumulative drug release. The permeability of L18FNs was analyzed through the Franz diffusion cell experiment, confirming that the degree of saturation of fatty acids affects the permeability of LFNs. While the permeability of LSNs was not significantly enhanced due to higher particle size after nanonization, LONs and LLNs increased 1.56 and 1.85 times in permeation, respectively, compared to LEU. Conclusion: Utilization of different degree of saturation of fatty acids to conjugate a peptide drug could provide pharmaceutical versatility via self-assembly and modification of physicochemical properties.

Design and evaluation of in vivo bioavailability in beagle dogs of bilayer tablet consisting of immediate release nanosuspension and sustained release layers of rebamipide.

The purpose of this study was to develop a once-daily, bilayer matrix tablet with immediate (IR) and sustained release (SR) layers of poorly water-soluble and absorption site dependent rebamipide (RBM) to substitute three times a day IR tablet. Owing to the pH-dependent poor water solubility of RBM in low pH condition, salt-caged nanosuspensions (NSPs) consisting of RBM and poloxamer 407 (POX 407) or poloxamer 188 (POX 188) were prepared using an acid-base neutralization method to increase the dissolution rate, which was subsequently applied to the immediate-release (IR) layer. Polyethylene oxide (PEO) with different molecular weights (PEO 100,000 and PEO 5,000,000) and hydroxypropyl methylcellulose 4000 (HPMC 4000) were then investigated as SR agents to incorporate into the SR layer with pure RBM via wet granulation method. The dissolution profile of the optimized bilayer tablet having 50% IR and 50% SR layer of 300 mg RBM showed that the IR layer could rapidly disintegrate in pH 1.2 buffer solution within 2 h, reaching 50% of drug release from the tablet, followed by an extended drug release from the SR layer in pH 6.8 buffer over 24 h. An in vivo pharmacokinetic study was carried out in beagle dogs to compare the optimal formulation (300 mg RBM bilayer tablet) and the commercial tablet (Mucosta® 100 mg) as a reference. Unexpectedly, despite enhanced dissolution rate in a controlled manner, a designed bilayer tablet had no dose- and dosage form dependent in vivo bioavailability in beagle dogs as compared with IR 100 mg RBM reference tablet. It was evident that solubility in low pH condition, gastric residence time and absorption site of RBM should be carefully considered for designing specific SR or gastroretentive dosage form to improve therapeutic outcomes.

Electrostatic molecular effect of differently charged surfactants on the solubilization capacity and physicochemical properties of salt-caged nanosuspensions containing pH-dependent and poorly water-soluble rebamipide.

In this study, the electrostatic molecular effect of differently charged surfactants on the solubilization capacity and physicochemical properties of salt-caged nanosuspensions (NSPs) containing poorly water-soluble drug was investigated. Anionic rebamipide (RBM) was chosen as a model drug because of its poor water solubility in low pH condition and ionizable acidic forms. Negatively charged sodium lauryl sulfate (SLS) and positively charged cetyltrimethylammonium bromide (CTAB) were selected as surfactants for the preparation of NSPs or in the dissolution medium. Salt-caged NSPs surrounded by NaCl were prepared by the HCl-NaOH neutralization method in the presence of poloxamer 407. Interestingly, the addition of positively charged CTAB in the preparation process or the dissolution media could interfere with the solubilization capacity of salt-caged NSPs containing a negatively charged drug via intermolecular electrostatic attraction. In the presence of positively charged CTAB, the salt-caged NSP was disordered in structure via electrostatic attractive interaction with partially ionizable anionic RBM resulting in changes in the physicochemical properties of the salt-caged NSP such as low drug content, increased particle size, decreased dissolution rate, and the formation of water-insoluble precipitates with rough and irregular crystals. This inhibitory effect of CTAB on the dissolution rate of pure RBM and the salt-caged NSP in pH 6.8 intestinal fluid was pronounced in a concentration-dependent manner mainly owing to the formation of precipitates, so-called poorly soluble complexes. When the salt-caged NSP (F1) was dissolved in DW containing CTAB, the dissolution rate decreased more significantly, dissolving less than 20% within 2 h. Depending on the surfactant charges, the charge density and the initial potential were varied during the dissolution of NSPs in deionized water (DW). In contrast, the negatively charged SLS did not significantly change the physicochemical properties of the salt-caged NSP. For example, the dissolution rate of the salt-caged NSP containing SLS in DW or pH 1.2 gastric fluid remained over 90% for 2 h. Surfactants for the formulation or dissolution media should be chosen carefully because of their effect on the physicochemical properties and solubilization capacity of salt-caged NSPs containing poorly water-soluble and ionizable drugs via electrostatic molecular interactions.

Recognition Investigation of Community Pharmacists Implementing Good Pharmacy Practice in Korea.

This study aimed to verify, for the first time, the need for Good Pharmacy Practice (GPP) regulations as guidelines to provide pharmaceutical care services in community pharmacies in Korea. Statistical analyses were performed with demographic characteristics, institutional factors, and diversity factors of 3 pharmaceutical care services as independent variables and the favorability of GPP implementation as a dependent variable. In assessing the diversity of methods of providing pharmaceutical care services as an indicator of willingness to provide these services, this study understood such diversity as an innovative behavior that represents the efforts and willingness of pharmacists to provide better services. The results of descriptive statistics showed that most pharmacists in community pharmacy recognize that guidelines are necessary to provide better pharmaceutical care services. The statistical correlation analysis results confirmed that a greater need for guidelines was strongly related to higher GPP favorability. The institutional factors had the greatest influence on GPP favorability, rather than diversity factors of pharmaceutical care services, ultimately with the Korean perspectives to equate the GPP with the guidelines for pharmaceutical care services. Our study confirmed that it is a wish and a policy task of community pharmacists in Korea to enact GPP as soon as possible.

Release Kinetics of Hydroxypropyl Methylcellulose Governing Drug Release and Hydrodynamic Changes of Matrix Tablet.

BACKGROUND: Hydrophilic Hydroxypropyl Methylcellulose (HPMC) matrix tablets are the standard role model of the oral controlled-release formulation. Nevertheless, the HPMC kinetics for the mechanistic understanding of drug release and hydrodynamic behaviors are rarely investigated. This study aims to investigate the release behaviors of both HPMC and paracetamol (model drug) from the hydrophilic matrix tablet. METHODS: Two different viscosity grades of HPMC were used (Low viscosity: 6 cps, High viscosity: 4,000 cps). Three different ratios of drug/HPMC (H:38.08%, M:22.85%, and L:15.23% (w/w) of HPMC amounts in total weight) matrix tablets were prepared by wet granulation technique. The release profiles of the drug and HPMC in a matrix tablet were quantitatively analyzed by HPLC and 1H-Nuclear Magnetic Resonance (NMR) spectroscopy. The hydrodynamic changes of HPMC were determined by the gravimetric behaviors such as swelling and erosion rates, gel layer thickness, front movement data,and distributive Near-Infrared (NIR) chemical imaging of HPMC in a matrix tablet during the dissolution process. RESULTS: High viscosity HPMC tablets showed slower release of HPMC than the release rate of drug, suggesting that drug release preceded polymer release.Different hydration phenomenon was qualitatively identified and corresponded to the release profiles. The release behaviors of HPMC and drug in the tablet could be distinguished with the significant difference with fitted dissolution kinetics model (Low viscosity HPMC 6cps; Korsmeyer-Peppas model, High viscosity HPMC 4000cps; Hopfenberg model, Paracetamol; Weibull model) according to the weight of ingredients and types of HPMC. CONCLUSION: The determination of HPMC polymer release correlating with drug release, hydrodynamic behavior, and NIR chemical imaging of HPMC can provide new insights into the drug release- modulating mechanism in the hydrophilic matrix system.