Correlation between urine cytology results on the day after overnight continuous saline irrigation following transurethral resection of bladder tumor and bladder tumor recurrence.

PURPOSE: To investigate the relationship between urine cytology results after overnight continuous saline irrigation (OCSI) following transurethral resection of bladder tumor (TURBT) and bladder tumor recurrence in non-muscle invasive bladder cancer (NMIBC). MATERIALS AND METHODS: A retrospective study was conducted on patients diagnosed with NMIBC between 2016 and 2020 after undergoing TURBT at our hospital. All patients received OCSI following TURBT and had urine cytology test at postoperative 1 day. Urine cytology was classified into three groups: Negative, low-grade urothelial neoplasm (LGUN)+atypical urothelial cells (AUC), and suspicious for high-grade urothelial carcinoma (SHGUC)+high-grade urothelial carcinoma (HGUC). Recurrence-free survival (RFS) in each group was compared using the Kaplan-Meier method. Univariable and multivariable Cox regression analyses were performed to evaluate independent prognostic factors. RESULTS: A total of 172 patients were included in this study. Based on urine cytology group (after OCSI), RFS did not reach the median value in the Negative group. In the LGUN+AUC group, the median RFS was 615.00 days. In the SHGUC+HGUC group, the median RFS was 377.00 days. In survival analysis, the Negative group had a longer RFS than the SHGUC+HGUC group (p=0.013). However, Cox regression analysis showed that SHGUC+HGUC was not an independent prognostic factor for recurrence. CONCLUSIONS: Urine cytology results after OCSI following TURBT in NMIBC were associated with bladder tumor recurrence. Specifically, SHGUC or HGUC in urine cytology after OCSI showed earlier recurrence than negative cases. However, further research is needed to accurately determine whether it is an independent prognostic factor.

Clinical outcome and safety of holmium laser prostate enucleation after transrectal prostate biopsies for benign prostatic hyperplasia.

PURPOSE: This study aimed to assess the clinical outcome and safety of holmium laser enucleation of the prostate (HoLEP) following transrectal ultrasound-guided prostate biopsy (TR biopsy) in the treatment of benign prostate hyperplasia. MATERIALS AND METHODS: We retrospectively analyzed data from 556 patients who underwent HoLEP between 2014 and 2021. The patients were categorized into six groups: Group 1-A (n=45) underwent HoLEP within four months post TR biopsy. Group 1-B (n=94) underwent HoLEP more than four months post TR biopsy. Group 1-C (n=120) underwent HoLEP after a single TR biopsy. Group 1-D (n=19) underwent HoLEP after two or more TR biopsies. Group 1-total (n=139, group 1-A+group 1-B or group 1-C+group 1-D) underwent HoLEP post TR biopsy. Group 2 (control group, n=417) underwent HoLEP without prior TR biopsy. We examined perioperative parameters, safety, and functional outcomes. RESULTS: The age, body mass index, International Prostate Symptom Score (IPSS), uroflowmetry, and comorbid diseases between group 1-total and group 2 were comparable. However, group 1-total exhibited significantly elevated prostate-specific antigen levels and larger prostate volumes (p<0.01). Perioperative factors like enucleation time, enucleation weight, and catheterization duration were notably higher in group 1-total (p<0.01). All groups showed significant improvements in IPSS, postvoid residual urine, and maximum flow rate during the 1-year postoperative period (p<0.05). The rates of postoperative complications were similar between group 1-total and group 2. CONCLUSIONS: Enucleation time and catheterization duration were significantly longer in the TR biopsy group. However, postoperative complications were not significantly different between TR biopsy and non-TR biopsy groups.

CAD-CAM resin composites: Effective components for further development.

OBJECTIVE: This paper summarizes the effective components of computer-aided design and computer-aided manufacturing (CAD-CAM) resin composites that contribute to achieving greater mechanical properties and further development. METHODS: In silico multi-scale analysis, in silico nonlinear dynamic finite element analysis (FEA), and artificial intelligence (AI) were used to explore the effective components of CAD-CAM resin composites. The effects of the filler diameter and silane coupling ratio on the mechanical properties of CAD-CAM resin composites have been clarified through multi-scale analysis. The effects of the filler contents, and filler and monomer compositions have been investigated by AI algorithms. The fracture behavior of CAD-CAM composite crown was analyzed using in silico non-linear dynamic FEA. The longevity of CAD-CAM composite crown was assessed through step-stress accelerating life testing (SSALT). RESULTS: As the filler diameter decreases, there is an increase in elastic moduli and compressive strengths at the macroscale. At the nanoscale, a decrease in the filler diameter results in a decrease in the maximum value of the maximum principal strain. When the silane coupling ratio decreases, there is a decrease in the elastic modulus and compressive strength. According to the exhaustive search and feature importance analysis based on the AI algorithm, the combination of certain components was narrowed down to achieve a flexural strength of 269.5 MPa. The in silico non-linear FEA successfully detected the sign of the initial crack of the CAD-CAM composite molar crown. The SSALT revealed that CAD-CAM resin composite molar crowns containing nanofillers with a high fraction of resin matrix demonstrated great longevity. SIGNIFICANCE: This paper summarized the effective components of CAD-CAM resin composites for their further development. The integration of in vitro and in silico approaches will expedite the advancement of CAD-CAM resin composites, offering benefits such as time efficiency and reduction of material waste for researchers and manufacturers.

In silico nonlinear dynamic finite-element analysis for biaxial flexural strength testing of CAD/CAM materials.

PURPOSE: The aim of this study was to establish and assess the validity of in silico models of biaxial flexural strength (BFS) tests to reflect in vitro physical properties obtained from two commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic blocks and one CAD/CAM resin composite block. METHODS: In vitro three-point bending and BFS tests were conducted for three CAD/CAM materials (n = 10): Katana Zirconia ST10 (raw material: super-translucent multilayered zirconia, ST10; Kuraray Noritake Dental, Niigata, Japan), Katana Zirconia HT10 (raw material: highly translucent multilayered zirconia, HT10; Kuraray Noritake Dental), and Katana Avencia N (AN; Kuraray Noritake Dental). Densities, flexural moduli, and fracture strains were obtained from the in vitro three-point bending test and used as an input for an in silico nonlinear finite element analysis. The maximum principal stress (MPS) distribution was obtained from an in silico BFS analysis. RESULTS: The elastic moduli of AN, HT10, and ST10 were 6.513, 40.039, and 32.600 GPa, respectively. The in silico fracture pattern of ST10 observed after the in silico evaluation was similar to the fracture pattern observed after the in vitro testing. The MPS was registered in the center of the tensile surface for all three specimens. The projections of the supporting balls were in the form of a triple asymmetry. CONCLUSIONS: The in silico approach established in this study provided an acceptable reflection of in vitro physical properties, and will be useful to assess biaxial flexural properties of CAD/CAM materials without wastage of materials.

The epidemiology of male lower urinary tract symptoms associated with benign prostatic hyperplasia: Results of 20 years of Korean community care and surveys.

PURPOSE: To investigate the prevalence of lower urinary tract symptoms/benign prostatic hyperplasia in a Korean population. MATERIALS AND METHODS: The Korean Prostate & Voiding Health Association provided free prostate-related community health care and conducted surveys in all regions of Korea from 2001 to 2022 with the cooperation of local government public health centers. A total of 72,068 males older than 50 were surveyed and analyzed. History taking, International Prostate Symptom Score (IPSS), transrectal ultrasonography, prostate-specific antigen (PSA) testing, uroflowmetry, and urine volume testing were performed. RESULTS: The mean prostate volumes in males in their 50s, 60s, 70s, and 80s or above were 24.7 g, 27.7 g, 31 g, and 33.7 g, respectively. The proportion of males with high PSA greater than 3 ng/mL was 3.8% among males in their 50s, 7.7% among males in their 60s, 13.1% among males in their 70s, and 17.9% among males 80 years of age or older. The mean IPSS total scores in males in their 50s, 60s, 70s, and 80s or above were 10.7, 12.7, 14.5, and 16, respectively. Severe symptoms were reported by 27.3% of males, whereas 51.7% reported moderate symptoms. The mean Qmax in males in their 50s, 60s, 70s, and 80s or above were 20 mL/s, 17.4 mL/s, 15.4 mL/s, and 13.8 mL/s, respectively. CONCLUSIONS: In this population-based study, mean prostate volume, IPSS, PSA, and Qmax were 30.6±15.1 g, 14.8±8.2, 1.9±4.7 ng/mL, and 15.6±6.5 mL/s, respectively. Aging was significantly associated with increased prostate volume, PSA levels, and IPSS scores, and with decreased Qmax and urine volume.

Pelvic floor muscle exercise with or without duloxetine for postprostatectomy urinary incontinence: A retrospective single-center study.

This study aimed to evaluate the effectiveness of combined pelvic floor muscle exercise (PFME) and duloxetine treatment in the recovery from postprostatectomy urinary incontinence (PPUI). Participants were patients who underwent radical prostatectomy (RP) between 2018 and 2021 and who were able to attend follow-up appointments every 3 months for at least 12 months. Continence was defined as the use of ≤1 pad per day. PPUI was compared at each follow-up period by dividing the participants into the PFME group (PFME only after RP) and the PFME + DUL group (PFME and 30 mg duloxetine daily after RP). A total of 197 patients were included. No significant differences were observed in the baseline characteristics between the 2 groups. In the PFME group (n = 127), the PPUI was 77.17%, 27.56%, 17.32%, 12.60%, and 9.45% at 2 weeks, 3 months, 6 months, 9 months, and 12 months, respectively. In the PFME + DUL group (n = 70), the PPUI was 62.50%, 17.86%, 12.50%, 8.93%, and 5.36%, respectively, at the same follow-up period. At 2 weeks, the PFME + DUL group demonstrated a better incontinence rate than the PFME group (P = .019). However, no significant differences were found in the incontinence rates between the 2 groups at each follow-up period after 3 months. Compared to PFME monotherapy, the combination therapy of PFME and duloxetine has short-term effectiveness in improving PPUI, but it does not have a significant long-term impact. Therefore, for early recovery from PPUI, duloxetine should be administered for a short period during PFME.

Quantitative evaluation of the degradation amount of the silane coupling layer of CAD/CAM resin composites by water absorption.

PURPOSE: Degradation of silane coupling layers by water ingress in computer-aided design/computer-aided manufacturing (CAD/CAM) of resin composites has been reported qualitatively. In this study, we quantitatively evaluated how water absorption of CAD/CAM resin composites affects the silane coupling layer by in vitro and in silico methods. METHODS: A Katana Avencia block (KAB) and an experimental matrix block composed of only a matrix resin were used to evaluate the effect of water immersion for seven days on the elastic modulus. X-ray photoelectron spectroscopy (XPS) with fluorine-labeling of the KAB was performed to evaluate the atomic percentage of F1s, which represents the hydrolysis amount by water immersion. In silico analysis of the three-dimensional model of the KAB was performed to determine the coupling ratios before and after water immersion. RESULTS: The elastic modulus of the KAB was 8.2 GPa before and 6.9 GPa after immersion in water. The atomic percentages of F1s in the after- and before-immersion groups were 14.31% and 11.52%, respectively, suggesting that hydrolysis of the silane coupling layer occurred during water immersion. From in silico analysis of the three-dimensional model of the KAB, the coupling ratio was predicted to be 78.2% before water immersion. After water immersion, the coupling ratio was predicted to be 68.4%. CONCLUSIONS: The in vitro and in silico approaches established in this study were able to predict the silane coupling ratios of CAD/CAM resin composites, and they showed that the silane coupling ratio decreased by water absorption.

Development of artificial intelligence model for supporting implant drilling protocol decision making.

Purpose This study aimed to develop an artificial intelligence (AI) model to support the determination of an appropriate implant drilling protocol using cone-beam computed tomography (CBCT) images.Methods Anonymized CBCT images were obtained from 60 patients. For each case, after implant placement, images of the bone regions at the implant site were extracted from 20 slices of CBCT images. Based on the actual drilling protocol, the images were classified into three categories: protocols A, B, and C. A total of 1,200 images were divided into training and validation datasets (n = 960, 80%) and a test dataset (n = 240, 20%). Another 240 images (80 images for each type) were extracted from the 60 cases as test data. An AI model based on LeNet-5 was developed using these data sets. The accuracy, sensitivity, precision, F-value, area under the curve (AUC) value, and receiver operating curve were calculated.Results The accuracy of the trained model is 93.8%. The sensitivity results for drilling protocols A, B, and C were 97.5%, 95.0%, and 85.0%, respectively, while those for protocols A, B, and C were 86.7%, 92.7%, and 100%, respectively, and the F values for protocols A, B, and C were 91.8%, 93.8%, and 91.9%, respectively. The AUC values for protocols A, B, and C are 98.6%, 98.6%, and 99.4%, respectively.Conclusions The AI model established in this study was effective in predicting drilling protocols from CBCT images before surgery, suggesting the possibility of developing a decision-making support system to promote primary stability.

Expression Patterns of ERα, ERß, AR, SIRT1, SIRT2, and SIRT3 in Prostate Cancer Tissue and Normal Prostate Tissue.

BACKGROUND/AIM: The purpose of this study was to examine the expression of estrogen receptor α (ERα) and ß (ERß), androgen receptor (AR), SIRT1, SIRT2 and SIRT3 in prostate cancer (PCa). MATERIALS AND METHODS: From October 2010 to January 2015, 70 patients who had undergone radical prostatectomy following a PCa diagnosis were enrolled in our study. Normal prostate tissue (NPT) and prostate cancer tissues (PCAT) were separated, and the expression of each receptor in each tissue was analyzed with immunochemical staining. Univariate and multivariate analyses were performed to identify factors affecting the development of PCa. RESULTS: ERß and AR were highly expressed in PCAT compared with NPT (p<0.05). SIRT2 was highly expressed in NPT and PCAT (p<0.05). Univariate and multivariate analyses showed that AR and SIRT2 affect PCa development. CONCLUSION: AR is a risk factor for PC, and SIRT2 is associated with a lower incidence of PCa.

Color matching ability of resin composites incorporating supra-nano spherical filler producing structural color.

OBJECTIVE: The aim of this study was to evaluate the optical properties of supra-nano spherical fillers with different diameters and the color matching ability of resin composites (RC) incorporating these fillers. METHODS: Two types of SiO2-ZrO2 nano fillers with different diameters (150nm and 260nm) were used. The size distribution of each filler was measured and filler morphology was observed. The colors and spectral reflection spectra were measured by a spectral reflectometer. Experimental RCs incorporating ϕ150-nm/ϕ260-nm filler (D150RC/D260RC) were prepared. For the base dentin part, disc specimens (Estelite Astelia: A1B, A2B, A3B, A3.5B, or A4B) were prepared with a cylindrical cavity. Estelite Astelia with NE shade was layered on top as the enamel layer. Disk specimens with different cavity depths were prepared using A3B shade. Experimental RC was used to fill the cavity, and spectral reflection spectrums were obtained and analyzed. Filtek Supreme Ultra (FSU) with A3B shade was used (n=10) as a control. RESULTS: Both ϕ150-nm and ϕ260-nm nano fillers showed uniform spherical shape and exhibited no aggregation. The maximum peaks of the spectral reflection spectra of the ϕ150-nm and ϕ260-nm nano fillers were 380nm and 580nm, producing structural colors close to blue and yellow, respectively. The spectral reflection spectrum of FSU had a broad peak at 540nm, and D150RC had a significant peak at 420nm. The D260RC specimen had a broad peak at 680nm. The peaks of D150RC and D260RC significantly decreased in accordance with the shift in base RC shade from A1B to A4B. There was no significant difference in the peak of the reflection spectral spectra among different cavity depths of D260RC. These results suggest that the experimental RC could reflect base RC colors via the matrix resin, and the amount of transmitted light from the base RC was not much different with cavity depth. SIGNIFICANCE: D260RC producing structural color demonstrated a broad spectrum and reduction in brightness and chromatic value by adapting to surrounding restorative materials, suggesting its ability to enhance the chameleon (blending) effects to improve color matching. D260RC showed better color matching ability than resin composite containing uniformly sized ϕ150-nm SiO2-ZrO2 supra-nano spherical filler.

Survival of implant-supported resin-matrix ceramic crowns: In silico and fatigue analyses.

OBJECTIVE: To evaluate the fatigue survival, failure mode, and maximum principal stress (MP Stress) and strain (MP Strain) of resin-matrix ceramic systems used for implant-supported crowns. METHODS: Identical molar crowns were milled using four resin-matrix ceramics (n = 21/material): (i) Shofu Hard, (ii) Cerasmart (iii) Enamic, and (iv) Shofu HC. Crowns were cemented on the abutments, and the assembly underwent step-stress accelerated-life testing. Use level probability Weibull curves at 300 N were plotted and the reliability at 300, 500 and 800 N was calculated for a mission of 50,000 cycles. Fractographic analysis was performed using stereomicroscope and scanning electron microscope. MP Stress and MP Strain were determined by finite element analysis. RESULTS: While fatigue dictated failures for Cerasmart (ß > 1), material strength controlled Shofu Hard, Enamic, and Shofu HC failures (ß < 1). Shofu HC presented lower reliability at 300 N (79%) and 500 N (59%) than other systems (>90%), statistically different at 500 N. Enamic (57%) exhibited a significant reduction in the probability of survival at 800 N, significantly lower than Shofu Hard and Cerasmart; however, higher than Shofu HC (12%). Shofu Hard and Cerasmart (>93%) demonstrated no significant difference for any calculated mission (300-800 N). Failure mode predominantly involved resin-matrix ceramic fracture originated from occlusal cracks, corroborating with the MP Stress and Strain location, propagating through the proximal and cervical margins. SIGNIFICANCE: All resin-matrix ceramics crowns demonstrated high probability of survival in a physiological molar load, whereas Shofu Hard and Cerasmart outperformed Enamic and Shofu HC at higher loads. Material fracture comprised the main failure mode.

Fracture origin and crack propagation of CAD/CAM composite crowns by combining of in vitro and in silico approaches.

PURPOSE: Fractographic analysis has been used to investigate the fracture behavior of Computer-aided design/computer-aided manufacturing (CAD/CAM) composite crowns by subjecting them to compression tests. However, it is difficult to investigate details of the fracture, including its initiation and propagation, using in vitro tests. The aim of this study was to determine the fracture origins and the order of crack initiation of CAD/CAM composite crowns using in silico nonlinear dynamic finite element analysis (FEA). MATERIAL AND METHODS: The following materials were used: Cerasmart (CS), Katana Avencia Block (KA), and Shofu Block HC (HC) as CAD/CAM crowns, Panavia SA Cement Plus (SA) as a luting material, and Clearfil DC Core Plus (DC) as an abutment. The elastic moduli and fracture strain of each material were obtained from the stress-strain curve of in vitro three-point bending tests. The fracture origins and order of crack initiation of the materials were determined by in silico nonlinear dynamic compression analysis. Load-displacement curves were statistically compared with the results of the in vitro compression tests (Pearson's correlation test, α = 0.05). RESULTS: The nonlinear dynamic FEA demonstrated that crack initiation was primarily observed near the lingual side of the CAD/CAM crowns and immediately propagated to the central fossa. The models were fractured following the in vitro fracture strains, showing the same order for the products tested (CS/KA/HC, SA, and DC). Load-displacement curves with the use of CS, KA, and HC were significantly correlated to the corresponding in vitro compression tests results (CS: r = 0.985, p < 0.05, KA: r = 0.987, p < 0.05, and HC: r = 0.997, p < 0.05). CONCLUSIONS: The in silico model established in this study clarified the crack initiation of the CAD/CAM composite crowns and the order of crack initiation among the investigated products, suggesting that the present approach is useful for analyzing the fracture behavior of CAD/CAM composite crowns in detail.

Presence of leucocytes in prostatic secretions correlates with the severity of lower urinary tract symptoms.

We investigated the correlation between the presence of leucocytes in expressed prostatic secretion and the lower urinary tract symptom severity by retrospectively reviewing 699 men with lower urinary tract symptoms. The patients were evaluated by the International Prostate Symptoms Score and the Overactive Bladder Symptoms Score and underwent expressed prostatic secretion testing. Patients were classified into groups 1 and 2 based on the expressed prostatic secretion leucocyte count. The mean total and storage score of the International Prostate Symptoms Score, and mean total Overactive Bladder Symptoms Score were higher in group 1. Urine flow metrics showed that voided volume and maximum flow rate were lower in group 1. The scores for International Prostate Symptoms Score questions 4, 6 and 7 and Overactive Bladder Symptoms Score question 2 were higher in group 1 and showed a weak positive correlation with expressed prostatic secretion. Voided volume and maximum flow rate showed the strongest correlation, although International Prostate Symptoms Score question 7 and Overactive Bladder Symptoms Score question 2 were the only independent predictors of expressed prostatic secretion. Therefore, leucocytes in expressed prostatic secretion are associated with the lower urinary tract symptom severity, particularly nocturnal urination symptoms.

Malignant pulmonary embolism associated with renal sarcoma: A case report.

RATIONALE: The preoperative diagnosis of massive pulmonary tumor embolism associated with renal neoplasms is relatively rare. In most cases, pulmonary tumor embolism is detected intraoperatively during renal tumor resection. Moreover, primary renal sarcoma is rare, and primary renal sarcoma complicated by pulmonary tumor embolism is extremely rare; accordingly, there is no optimal treatment for such cases. Herein, we report a case of renal sarcoma associated with pulmonary tumor embolism. PATIENT CONCERNS: A 39-year-old man was admitted to the emergency room owing to the sudden onset of dyspnea and palpitation. DIAGNOSIS: Contrast-enhanced computed tomography (CT) revealed a large mass in the right kidney involving the infrahepatic inferior vena cava, with massive pulmonary emboli in both the pulmonary arteries. INTERVENTIONS: Emergency pulmonary embolectomy with radical nephrectomy was performed. OUTCOMES: The patient experienced apparent remission of dyspnea, and resolution of right ventricle dysfunction. However, although remnant emboli were detected in the segmental arteries on postoperative CT, complete resolution of pulmonary embolism was observed after adjuvant chemotherapy. LESSONS: Thus, concomitant cytoreductive nephrectomy with pulmonary embolectomy along with chemotherapy may be effective for patients with renal sarcoma with pulmonary tumor embolism.

Influence of hydrolysis degradation of silane coupling agents on mechanical performance of CAD/CAM resin composites: In silico multi-scale analysis.

The aim of this study was to build an in silico computer-aided design and computer-aided manufacturing (CAD/CAM) resin-composite-block (RCB) model with different silane coupling ratios and to evaluate the physical and mechanical properties of the models, including the elastic modulus, Poisson's ratio, compressive strength, and maximum principal strain. Nanoscale CAD/CAM RCB models were designed by using CAD software that consisted of twelve spherical silica nanofiller particles and a resin matrix. Seven nanoscale models with different silane coupling ratios were prepared with the same filler volume contents. Homogenization analysis was conducted by using voxel-base finite-element analysis software to predict the elastic moduli and Poisson's ratio of the macro CAD/CAM RCB. Localization analysis was used to analyze the maximum principal strain distribution in the hydrolysis layer. In silico multi-scale analysis demonstrated that the compressive strength of the CAD/CAM RCB was reduced with a decrease in the silane coupling ratios of the fillers.

In silico non-linear dynamic analysis reflecting in vitro physical properties of CAD/CAM resin composite blocks.

PURPOSE: The aim of this study was to assess the validity of in silico models of three-point bending tests to reflect in vitro physical properties obtained from three commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite blocks and demonstrate notchless triangular prism analysis with those properties. MATERIAL AND METHODS: Three types of commercially available CAD/CAM resin composite blocks were used: Cerasmart 300 (CS300; GC, Tokyo, Japan), Katana Avencia P Block (AP; Kuraray Noritake Dental, Tokyo, Japan), and KZR CAD HR3 Gamma Theta (GT; Yamakin, Osaka, Japan). In vitro/in silico three-point bending tests were conducted to obtain elastic modulus and fracture strain for non-linear dynamic finite element analysis (n = 10/each). Fractured surfaces of specimens after in vitro NTP tests were observed, and the fracture toughness of each CAD/CAM resin composite was obtained by in silico NTP analysis. RESULTS: Both in vitro and in silico load-displacement curves obtained from three-point bending tests were significantly correlated (p < 0.05). The elastic moduli of CS300, AP, and GT were 8.0 GPa, 10.0 GPa, and 9.0 GPa, respectively. The fracture toughness values obtained from in silico NTP analysis of CS300, AP, and GT were 5.057 MPa m1/2, 4.193 MPa m1/2, and 4.880 MPa m1/2, respectively. There was no significant difference in the length of the stable region among the three CAD/CAM resin composites (p = 0.09). CONCLUSIONS: The in silico approach established in this study showed acceptable reflection of in vitro physical properties and will be useful for assessing fracture toughness related to the longevity of CAD/CAM resin composites without wastage of materials.

In silico multi-scale analysis of remodeling peri-implant cortical bone: a comparison of two types of bone structures following an undersized and non-undersized technique.

PURPOSE: The aim of this multi-scale in silico study was to evaluate the influence of resorption cavities on the mechanical properties and load distribution in cortical bone after implant placement with two different drilling protocols. MATERIAL AND METHODS: Two different micro-scale bone structures were assessed: cortical bone models with cavities (test) and without cavities (control) were designed from µCT data. In a macro-scale model, representing a mandibular ridge, oblique load of 150 N was applied on the implant-abutment. Maximum principal stress/strain, and shear stress/strain were calculated in the macro- and micro-scale models. RESULTS: Test presented anisotropic material properties. In tests, significantly greater maximum values of Maximum principal stress/strain were calculated in micro-scale model. These values were located at the implant neck area in the macro-scale model and in the proximity of cavities in the micro-scale model respectively. Greater values of shear stress/strain were found in the test along the mandibular horizontal plane. CONCLUSIONS: Cortical bone with resorption cavities following undersized drilling showed an impaired load distribution compared with bone without cavities. Subsequently, stress/strain distribution suggests that this bone model is more prone to microdamage, thus delaying the healing process.

Correction: KML001 Induces Apoptosis and Autophagic Cell Death in Prostate Cancer Cells via Oxidative Stress Pathway.

[This corrects the article DOI: 10.1371/journal.pone.0137589.].

Risk factors for postoperative urinary retention among women who underwent laparoscopic cholecystectomy.

OBJECTIVES: The aim of this study was to investigate the risk factors for postoperative urinary retention (POUR) among female patients by evaluating its occurrence in women who underwent laparoscopic cholecystectomy in Gyeongsang National University Hospital. METHODS: The medical records of female patients who had undergone laparoscopic cholecystectomy for gallbladder stones between March 2014 and February 2018 were reviewed. Information was collected regarding patient age, body mass index (BMI), creatinine, absolute neutrophil count, duration of the operation and anesthesia, the amount of fluid infused, American Society of Anesthesiologists (ASA) classification, and medical comorbidities, such as hypertension, diabetes, and lung, liver, heart, renal, and neurologic disease. Comparisons were made between the POUR and non-POUR groups, and both univariate and multivariate analyses were conducted. RESULTS: Seventeen of 591 patients (2.9%) developed POUR. There as a positive correlation between age and POUR (P = 0.040), and a negative correlation between BMI and POUR (P = 0.037). In addition, a history of neurologic disease was greater in the POUR group (P = 0.033), which also had a higher ASA class than the non-POUR group (P < 0.001). Multivariate analysis showed that a high ASA class was a risk factor for POUR (hazard ratio 3.01; 95% confidence interval 1.13-7.99; P = 0.027). CONCLUSIONS: Medical care providers need to be aware of the risk factors for POUR, which is likely to prolong hospital stay for Foley catheter placement. A high ASA class is an important risk factor for POUR among female patients, so medical staff need to provide proper preoperative management strategies for patients with a high ASA class.

Mechanical properties of computer-aided design/computer-aided manufacturing resin composites assuming perfect silane coupling using in silico homogenization of cryo-electron microscopy images.

PURPOSE: The aim of this study was to determine the mechanical properties of computer-aided design/computer-aided manufacturing (CAD/CAM) resin composites for dental restoration assuming perfect silane coupling by in silico homogenization analysis using a three-dimensional model constructed from cryo-electron microscopy (cryo-EM) images. METHODS: Three-dimensional dataset of a commercial CAD/CAM resin composite block (RCB) was obtained using EM with cryo-stage and focused ion beam at -130°C. The region of inspection was 1.8µm×1.4µm×1.2µm, and 213 slices were obtained from this region. Each slice was processed (noise reduction, threshold setting, and segmentation) using image processing software to design an in silico model. From the processed image slices, a bulk three-dimensional object and stereolithography model were reconstructed using voxel modeling software. To evaluate the elastic modulus and Poisson's ratio of the CAD/CAM RCB, homogenization analysis was performed. RESULTS: The generated voxel model included 37,276,216 voxels, 42,472,040 patches of the surface, 2,123,672 nodes, a volume of 165,748,899, and a surface area of 175,206,723. The mean of the elastic moduli along each axis was 10.71±1.79GPa. The mean of the Poisson's ratios of each plane was 0.23±0.02. CONCLUSIONS: A CAD/CAM resin composite model was successfully reconstructed from cryo-EM images, suggesting that the established image processing method is useful for producing dental restorative materials containing nano-fillers and for predicting homogenized mechanical properties. The homogenized mechanical properties indicated that the mechanical properties of the CAD/CAM RCB assumed perfect silane coupling between the fillers and resin matrix.