Reaction-dependent optical behavior and theoretical perspectives of colloidal ZnSe quantum dots.

Colloidal quantum dots (QDs) are attracting research interest because of their unique optical properties that result from the quantum confinement effect. ZnSe QDs, which are II-VI semiconductors, offer a wide direct bandgap (2.7 eV), making them promising for applications such as light-emitting diodes, photodetectors, and biomedical labeling. In the present work, colloidal ZnSe (QDs) were synthesized by the hot-injection method with a Zn:Se ratio of 1:1. The optical properties of ZnSe QDs obtained at different reaction times were investigated by spectrophotometric UV-vis absorption and emission measurements. The as-synthesized ZnSe QDs exhibit blue excitonic emission, and no defect emission was detected. Transmission electron micrographs indicated that the QDs have a spherical morphology with dimensions ranging from 3.69 to 4.53 nm. In particular, the Brus model was applied to demonstrate a correlation between the QD sizes and the optical bandgaps obtained from Tauc plots.

Two-dimensional material-based complementary ambipolar field-effect transistors with ohmic-like contacts.

Ambipolar field-effect transistors (FETs) possessing both electron and hole carriers enable implementation of novel reconfigurable transistors, artificial synaptic transistors, and output polarity controllable (OPC) amplifiers. Here, we fabricated a two-dimensional (2D) material-based complementary ambipolar FET and investigated its electrical characteristics. Properties of ohmic-like contacts at source/drain sides were verified from output characteristics and temperature-dependent measurements. The symmetry of electron and hole currents can be easily achieved by optimization of the MoS2or WSe2channels, different from the conventional ambipolar FET with fundamental issues related to Schottky barriers. In addition, we demonstrated successful operation of a complementary inverter and OPC amplifier, using the fabricated complementary ambipolar FET based on 2D materials.

Chemical gradients on graphene via direct mechanochemical cleavage of atoms from chemically functionalized graphene surfaces.

Manipulating the surface chemistry of graphene is critical to many applications that are achievable by chemical functionalization. Specifically, tailoring the spatial distribution of functional groups offers more opportunities to explore functionality using continuous changes in surface energy. To this end, careful consideration is required to demonstrate the chemical gradient on graphene surfaces, and it is necessary to develop a technique to pattern the spatial distribution of functional groups. Here, we demonstrate the tailoring of a chemical gradient through direct mechanochemical cleavage of atoms from chemically functionalized graphene surfaces via an atomic force microscope. Additionally, we define the surface characteristics of the fabricated sample by using lateral force microscopy revealing the materials' intrinsic properties at the nanoscale. Furthermore, we perform the cleaning process of the obtained lateral force images by using a machine learning method of truncated singular value decomposition. This work provides a useful technique for many applications utilizing continuous changes in the surface energy of graphene.

Stable water-floating transistor with recyclability.

Electronic wastes from used devices containing environmentally hazardous materials are an immediate concern for the sustainable development of electronic and sensor industries. To address this, a highly controllable and dedicated electronic module should be devised, that allows systematic recollection of as many components from the original device for their reuse. Here, we report the total recycling of an electronic device, exploiting a water-floating system that is based on a water-compatible semiconductor as an active material. To do so, we developed a system for stable electronics on the water surface. The floating semiconductor features a tunable morphology on the water surface, and is constructed into a water-floating gated transistor (WFGT) and water floating sensor (WFS), exhibiting an on-current of 4.2 × 10-5 A and an on/off ratio of ∼103. The device showed high recyclability over 25 cycles, with an efficiency of 99 ± 0.9% within 1 cycle and 92 ± 0.7% within 30 cycles. Furthermore, the device was also found to be stable for over 10 days. Our system has the potential to be an eco-friendly, cost-effective, and scalable device that is fully recyclable, which can be applied in areas once thought of as being beyond the scope of current semiconductor technology.

Convolutional neural networks for approximating electrical and thermal conductivities of Cu-CNT composites.

This article explores the deep learning approach towards approximating the effective electrical and thermal conductivities of copper (Cu)-carbon nanotube (CNT) composites with CNTs aligned to the field direction. Convolutional neural networks (CNN) are trained to map the two-dimensional images of stochastic Cu-CNT networks to corresponding conductivities. The CNN model learns to estimate the Cu-CNT composite conductivities for various CNT volume fractions, interfacial electrical resistances, Rc = 20 Ω-20 kΩ, and interfacial thermal resistances, R″t,c = 10-10-10-7 m2K/W. For training the CNNs, the hyperparameters such as learning rate, minibatch size, and hidden layer neurons are optimized. Without iteratively solving the physical governing equations, the trained CNN model approximates the electrical and thermal conductivities within a second with the coefficient of determination (R2) greater than 98%, which may take longer than 100 min for a convectional numerical simulation. This work demonstrates the potential of the deep learning surrogate model for the complex transport processes in composite materials.

Electrostatically Controllable Channel Thickness and Tunable Low-Frequency Noise Characteristics of Double-Gated Multilayer MoS2 Field-Effect Transistors with h-BN Dielectric.

Two-dimensional transition-metal dichalcogenide (TMD) materials have attracted increasing attention in efforts to overcome fundamental issues faced by the complementary metal-oxide-semiconductor industry. Multilayer TMD materials such as MoS2 can be used for high-performance transistor-based applications; the drive currents are high and the materials handle low-frequency (LF) noise well. We fabricated double-gated multilayer MoS2 transistors using the h-BN dielectric for the top gate and silicon dioxide for the bottom gate. We systemically investigated the bottom gate voltage (Vb)-controlled electrical characteristics and the top/bottom interface-coupling effects. The effective thickness of the MoS2 channel (tMoS2_eff) was well modulated by Vb, and tMoS2_eff reduction by negative Vb dramatically improved the Ion/Ioff ratio. Numerical simulation and analytical modeling with a variation of the depletion depth under different bias conditions verified the experimental results. We were also the first to observe Vb-tuned LF noise characteristics. Here, we discuss the Vb-affected series resistance and carrier mobility in detail. Our findings greatly enhance the understanding of how double-gated multilayer MoS2 transistors operate and will facilitate performance optimization in the real world.

Ultrahigh strength, modulus, and conductivity of graphitic fibers by macromolecular coalescence.

Theoretical considerations suggest that the strength of carbon nanotube (CNT) fibers be exceptional; however, their mechanical performance values are much lower than the theoretical values. To achieve macroscopic fibers with ultrahigh performance, we developed a method to form multidimensional nanostructures by coalescence of individual nanotubes. The highly aligned wet-spun fibers of single- or double-walled nanotube bundles were graphitized to induce nanotube collapse and multi-inner walled structures. These advanced nanostructures formed a network of interconnected, close-packed graphitic domains. Their near-perfect alignment and high longitudinal crystallinity that increased the shear strength between CNTs while retaining notable flexibility. The resulting fibers have an exceptional combination of high tensile strength (6.57 GPa), modulus (629 GPa), thermal conductivity (482 W/m·K), and electrical conductivity (2.2 MS/m), thereby overcoming the limits associated with conventional synthetic fibers.

Rapid and highly sensitive pathogen detection by real-time DNA monitoring using a nanogap impedimetric sensor with recombinase polymerase amplification.

Fast detection of pathogens is important for protecting our health and society. Herein, we present a high-performance nanogap impedimetric sensor for monitoring nucleic acid amplification in real time using isothermal recombinase polymerase amplification (RPA) for rapid pathogen detection. The nanogap electrode chip has two pairs of opposing gold electrodes with a 100 nm gap and was fixed to a PCB. Then, the nanogap impedimetric sensor was immersed in RPA reaction solution for the detection of E. coli O157:H7, and target DNA amplification was evaluated through bulk solution impedance changes using impedance spectroscopy every minute during RPA. In addition, target gene amplification in the sample solution during RPA was confirmed with a 2% DNA agarose gel. Our nanogap impedimetric sensor can detect down to a single copy of the eae A gene in gDNA extracted from E. coli O157:H7 as well as a single cell of pathogenic E. coli O157:H7 strain within 5 min during direct RPA, which was performed with the pathogen itself and without the extraction and purification of target gDNA. The miniaturized nanogap impedimetric sensor has potential as a cost-effective point-of-care device for fast and accurate portable pathogen detection via real-time nucleic acid analysis.

Hierarchical Porous Film with Layer-by-Layer Assembly of 2D Copper Nanosheets for Ultimate Electromagnetic Interference Shielding.

The emergence of technologies, such as 5G telecommunication, electric vehicles, and wearable electronics, has prompted demand for ultrahigh-performance and cost-effective shielding materials to protect against both the potentially harmful effects of electromagnetic interference (EMI) on human health and electronic device operation. Here, we report hierarchical porous Cu foils via an assembly of single-crystalline, nanometer-thick, and micrometer-long copper nanosheets and their use in EMI shielding. Layer-by-layer assembly of Cu nanosheets enabled the formation of a hierarchically structured porous Cu film with features such as multilayer stacking; two-dimensional networking; and a layered, sheetlike void architecture. The hierarchical-structured porous Cu foil exhibited outstanding EMI shielding performance compared to the same thickness of dense copper and other materials, exhibiting EMI shielding effectiveness (SE) values of 100 and 60.7 dB at thicknesses of 15 and 1.6 µm, respectively. In addition, the EMI SE of the hierarchical porous Cu film was maintained up to 18 months under ambient conditions at room temperature and showed negligible changes after thermal annealing at 200 °C for 1 h. These findings suggest that Cu nanosheets and their layer-by-layer assembly are one of the promising EMI shielding technologies for practical electronic applications.

Impact of Particulate Matter on the Clinical Characteristics of Rhinitis.

OBJECTIVES/HYPOTHESIS: To investigate the association between PM10 concentration and the severity of rhinitis symptoms. STUDY DESIGN: Retrospective cohort study. METHODS: Retrospective analysis of the data of 590 participants prospectively enrolled in a regional population-based cohort study was performed. The ambient PM10 concentrations were measured at 12 different observatories located in three cities. All participants were screened for allergic sensitization by skin prick tests and asked to complete questionnaires regarding their rhinitis symptoms. The severity and duration of rhinitis were analyzed and compared at different levels of PM10 concentration. RESULTS: On multivariate analysis, the PM10 concentration significantly correlated with the severity of symptoms when adjusting for age, sex, presence of sensitized allergen, region, and the time of enrolment (ß = 0.102, P = .021). Positive correlation was found between PM10 concentration and the duration of allergic rhinitis symptoms (ß = 0.082, P = .077). In the stratified analysis on the atopic status, there was a significant correlation between PM10 concentration and the severity and duration of rhinitis symptoms in those without allergic sensitization (ß = 0.104; P = .032 and ß = 0.104; P = .011, respectively). CONCLUSIONS: The significant correlation between the annual PM10 concentration and severity and duration of rhinitis symptoms suggests the necessity of intensive management of rhinitis patients exposed to elevated levels of ambient PM10 concentration. LEVEL OF EVIDENCE: 3 Laryngoscope, 131:E1753-E1759, 2021.

Transformation and Evaporation of Surface Adsorbents on a Graphene "Hot Plate".

Dynamic surface modification of suspended graphene at high temperatures was directly observed with in situ scanning transmission electron microscopy (STEM) measurements. The suspended graphene devices were prepared on a SiN membrane substrate with a hole so that STEM observations could be conducted during Joule heating. Current-voltage characteristics of suspended graphene devices inside the STEM chamber were measured while monitoring and controlling the temperature of graphene by estimating the electrical power of the devices. During the in situ STEM observation at high temperatures, residual hydrocarbon adsorbents that had remained on graphene effectively evaporated creating large, atomically clean graphene areas. At other places, dynamic changes in the shape, position, and orientation of adsorbents could be directly observed. The temperature of the suspended graphene sample was estimated to reach up to 2000 K during the experiment, making graphene an efficient high-temperature micrometer-sized electron-transparent hot plate for future experiments in microscopes.

Rare-Earth-Element-Ytterbium-Substituted Lead-Free Inorganic Perovskite Nanocrystals for Optoelectronic Applications.

Lead-(Pb-) halide perovskite nanocrystals (NCs) are interesting nanomaterials due to their excellent optical properties, such as narrow-band emission, high photoluminescence (PL) efficiency, and wide color gamut. However, these NCs have several critical problems, such as the high toxicity of Pb, its tendency to accumulate in the human body, and phase instability. Although Pb-free metal (Bi, Sn, etc.) halide perovskite NCs have recently been reported as possible alternatives, they exhibit poor optical and electrical properties as well as abundant intrinsic defect sites. For the first time, the synthesis and optical characterization of cesium ytterbium triiodide (CsYbI3 ) cubic perovskite NCs with highly uniform size distribution and high crystallinity using a simple hot-injection method are reported. Strong excitation-independent emission and high quantum yields for the prepared NCs are verified using photoluminescence measurements. Furthermore, these CsYbI3 NCs exhibit potential for use in organic-inorganic hybrid photodetectors as a photoactive layer. The as-prepared samples exhibit clear on-off switching behavior as well as high photoresponsivity (2.4 × 103 A W-1 ) and external quantum efficiency (EQE, 5.8 × 105 %) due to effective exciton dissociation and charge transport. These results suggest that CsYbI3 NCs offer tremendous opportunities in electronic and optoelectronic applications, such as chemical sensors, light emitting diodes (LEDs), and energy conversion and storage devices.

A seed-mediated growth of gold nanoparticles inside carbon nanotube fibers for fabrication of multifunctional nanohybrid fibers with enhanced mechanical and electrical properties.

The seed-mediated growth strategy of Au nanoparticles (Au NPs) inside carbon nanotube (CNT) fibers is demonstrated to greatly improve their mechanical and electrical properties and provide a function for catalytic applications. The resulting Au NP@CNT nanocomposite fibers exhibit 100% knot efficiency, catalytic activity and considerably enhanced modulus, tensile strength, and electrical conductivity from 7 GPa, 109 MPa and 1300 S cm-1 to 24 GPa, 351 MPa and 3600 S cm-1, respectively. The enhancement mechanism is also revealed by systematic characterization and theoretical simulations.

Unusual Thermal Conductivity of Carbon Nanosheets with Self-Emerged Graphitic Carbon Dots.

The thermal conductivity (κ) of two-dimensional conducting and transparent carbon nanosheets (CNSs) prepared by a catalyst- and transfer-free process is calculated for the first time by the optothermal Raman technique. A systematic structural analysis of CNSs reveals that the thickness of polymer films affects the interaction between molecules and a Si wafer significantly, thus helping to determine the ratio of sp2 and sp3 bonding configurations of carbon (C) atoms in the CNS. Notably, the holding time of carbonization can realize a hierarchical structure with graphitic carbon dots emerging from the CNS through the rearrangement of carbon atoms, leading to the excellent κ value of 540 W/(m·K) at 310 K. It is demonstrated that an appropriate increase in carbonization time can be an effective approach for improving the ratio of sp2- to sp3-bonded C atoms in the CNS. The thermal conductivity of the CNS with the highest ratio of sp2- to sp3-bonded C atoms exhibits superior behavior and is comparable to that of reduced graphene oxide and supported graphene, respectively. Finally, when the CNS with the highest κ value of 540 W/(m·K) was applied to a heater as the heat-dissipating material, the heater showed the temperature decrease by 14 °C compared to the case without the CNS. The catalyst- and transfer-free approach for the synthesis of CNSs is highly desirable for use as heat sink materials or substrates with heat dissipation functions for extensively integrated electronic devices.

Ultimate limit in size and performance of WSe2 vertical diodes.

Precise doping-profile engineering in van der Waals heterostructures is a key element to promote optimal device performance in various electrical and optical applications with two-dimensional layered materials. Here, we report tungsten diselenide- (WSe2) based pure vertical diodes with atomically defined p-, i- and n-channel regions. Externally modulated p- and n-doped layers are respectively formed on the bottom and the top facets of WSe2 single crystals by direct evaporations of high and low work-function metals platinum and gadolinium, thus forming atomically sharp p-i-n heterojunctions in the homogeneous WSe2 layers. As the number of layers increases, charge transport through the vertical WSe2 p-i-n heterojunctions is characterized by a series of quantum tunneling events; direct tunneling, Fowler-Nordheim tunneling, and Schottky emission tunneling. With optimally selected WSe2 thickness, our vertical heterojunctions show superb diode characteristics of an unprecedentedly high current density and low turn-on voltages while maintaining good current rectification.

Coherence in defect evolution data for the ion beam irradiated graphene.

The defect evolution in graphene produced by ion beam bombardment is investigated by changing the ion species, irradiation energy and dose. Raman spectroscopy is performed to examine the defect yield produced under various ion beam bombardment conditions. The defect yields of the vacancy-type defect are well described by the linear energy transfer (L) and dose (d). By increasing Ld, the defect yields exhibit similar behaviours for all ion species. As a consequence, all the defect yields can be collapsed into a single curve by multiplying them by a single parameter, suggesting that the defect evolution under various ion beam bombardment conditions can be described in a simple formula.

High-performance nanogap electrode-based impedimetric sensor for direct DNA assays.

The rapid and sensitive detection of pathogen DNA (Deoxyribonucleic acid) would be essential for diagnosis and appropriate antibiotic treatment time. Herein, we report a novel direct DNA detectable impedimetric sensor. Direct assay of the amplified target DNA (mecA gene from methicillin-resistant Staphylococcus aureus (MRSA)) was performed using the PCR (polymerase chain reaction) product without any purification. Even though there are lots of PCR reagents and excess salts in sample PCR product, the nanogap electrode-based impedimetric sensor was able to detect DNA amplification fast in 5th PCR cycle which had 260 fM mecA gene in sample originally. The 70 nm gap electrode sensor yielded over 20% signal increase at the 5th PCR cycle and the impedance change grew up to about 60% at 25th in case of sample with 260 fM mecA gene template originally. The increased concentration of target DNA template led to the rise in impedance change such as 60% up at 5th and 120% up at 25th cycle with 260 pM, respectively. It is very outstanding result as compared with the traditional PCR agarose gel. Besides, it is 7-fold superior sensitivity to the microgap electrode. Furthermore, genomic DNA sample extracted from MRSA was detected rapidly. The nanogap electrode-based impedimetric sensor could be a good candidate for a rapid, sensitive, and low-cost electrical biosensor for DNA characterization in diagnostics and disease monitoring.

Hybrid dielectrics composed of Al2O3 and phosphonic acid self-assembled monolayers for performance improvement in low voltage organic field effect transistors.

Low voltage operational organic transistors (< 4 V) based on pentacene were successfully fabricated with hybrid dielectric films composed of aluminum oxide using atomic layer deposition and various phosphonic acid-based self-assembled monolayers as the gate dielectrics. High capacitances up to 279 nF/cm2, low leakage current densities of 10-8 A/cm2 at 6 V, and high breakdown fields up to 7.5 MV/cm were obtained. The transistors with the octadecylphosphonic acid hybrid dielectric exhibited an improved saturation mobility of 0.58 cm2/Vs, a subthreshold slope of 151 mV/decade, a threshold voltage of - 1.84 V and an on-off current ratio of 106. The low surface energies of the self-assembled monolayers having non-polar terminal groups, such as methyl and pentafluorophenoxy, improved the carrier conduction of the transistors due to the pentacene growth with an edge-on orientation for low voltage operation. The pentafluorophenoxy end-group showed an accumulation of holes at the semiconductor-dielectric interface.

Ultrastrong Graphene-Copper Core-Shell Wires for High-Performance Electrical Cables.

Recent development in mobile electronic devices and electric vehicles requires electrical wires with reduced weight as well as enhanced stability. In addition, since electric energy is mostly generated from power plants located far from its consuming places, mechanically stronger and higher electric power transmission cables are strongly demanded. However, there has been no alternative materials that can practically replace copper materials. Here, we report a method to prepare ultrastrong graphene fibers (GFs)-Cu core-shell wires with significantly enhanced electrical and mechanical properties. The core GFs are synthesized by chemical vapor deposition, followed by electroplating of Cu shells, where the large surface area of GFs in contact with Cu maximizes the mechanical toughness of the core-shell wires. At the same time, the unique electrical and thermal characteristics of graphene allow a ∼10 times higher current density limit, providing more efficient and reliable delivery of electrical energies through the GFs-Cu wires. We believe that our results would be useful to overcome the current limit in electrical wires and cables for lightweight, energy-saving, and high-power applications.

2D Single-Crystalline Copper Nanoplates as a Conductive Filler for Electronic Ink Applications.

Large-scale 2D single-crystalline copper nanoplates (Cu NPLs) are synthesized by a simple hydrothermal method. The combination of a mild reductant, stabilizer, and shape modifier allows the dimensional control of the Cu nanocrystals from 1D nanowires (NWs) to 2D nanoplates. High-resolution transmission electron microscopy (HR-TEM) reveals that the prepared Cu NPLs have a single-crystalline structure. From the X-ray photoelectron spectroscopy (XPS) analysis, it is found that iodine plays an important role in the modification of the copper nanocrystals through the formation of an adlayer on the basal plane of the nanoplates. Cu NPLs with an average edge length of 10 µm are successfully synthesized, and these Cu NPLs are the largest copper 2D crystals synthesized by a solution-based process so far. The application of the metallic 2D crystals as a semitransparent electrode proves their feasibility as a conductive filler, exhibiting very low sheet resistance (0.4 Ω â–«-1 ) compared to Cu NWs and a transmittance near 75%. The efficient charge transport is due to the increased contact area between each Cu NPL, i.e., so-called plane contact (2D electrical contact). In addition, this type of contact enhances the current-carrying capability of the Cu NPL electrodes, implying that the large-size Cu NPLs are promising conductive fillers for printable electrode applications.