Alterations in Plasma Lipid Profile before and after Surgical Removal of Soft Tissue Sarcoma.

Soft tissue sarcoma (STS) is a relatively rare malignancy, accounting for about 1% of all adult cancers. It is known to have more than 70 subtypes. Its rarity, coupled with its various subtypes, makes early diagnosis challenging. The current standard treatment for STS is surgical removal. To identify the prognosis and pathophysiology of STS, we conducted untargeted metabolic profiling on pre-operative and post-operative plasma samples from 24 STS patients who underwent surgical tumor removal. Profiling was conducted using ultra-high-performance liquid chromatography-quadrupole time-of-flight/mass spectrometry. Thirty-nine putative metabolites, including phospholipids and acyl-carnitines were identified, indicating changes in lipid metabolism. Phospholipids exhibited an increase in the post-operative samples, while acyl-carnitines showed a decrease. Notably, the levels of pre-operative lysophosphatidylcholine (LPC) O-18:0 and LPC O-16:2 were significantly lower in patients who experienced recurrence after surgery compared to those who did not. Metabolic profiling may identify aggressive tumors that are susceptible to lipid synthase inhibitors. We believe that these findings could contribute to the elucidation of the pathophysiology of STS and the development of further metabolic studies in this rare malignancy.

Fed and fasted bioequivalence assessment of two formulations of extended-release fixed-dose combination dapagliflozin/metformin (10/1,000 mg) tablets in healthy subjects.

Two open-label, randomized, two-period crossover studies were conducted to investigate the pharmacokinetic (PK) properties, safety, and bioequivalence of the test formulation (KD4004), a new fixed-dose combination (FDC) formulation of dapagliflozin and metformin extended release (XR) tablets, relative to the reference formulation (10 mg dapagliflozin/1,000 mg metformin XR FDC tablet) in healthy subjects under fasting (Part A) and fed (Part B) conditions. After giving the dose, serial blood samples were collected for a period of 48 hours. Primary PK parameters (AUC0-t and Cmax) were used to assess bioequivalence between two dapagliflozin/metformin XR (10/1,000 mg) FDC formulations under fed and fasting conditions. Safety and tolerability were also evaluated. Part A and Part B were completed by 32 and 37 subjects, respectively. Bioequivalence of the two FDC formulations of dapagliflozin and metformin XR tablets was established in both the fasted and the fed conditions as the 90% confidence interval of the ratios of adjusted geometric means for AUC0-t and Cmax were contained within the predefined range of 0.800-1.250 bioequivalence criteria. Single-dose administration of dapagliflozin and metformin XR was safe and well tolerated as the two FDC formulations. In conclusion, both FDC formulations of dapagliflozin and metformin XR tablets were bioequivalent in fed and fasted subjects. All treatments were well tolerated. Trial Registration: Clinical Research Information Service Identifier: KCT0004026.

Metabolomic analysis of the inhibitory effect of phthalates and bisphenol A on the antioxidant activity of vitamin D in human samples using liquid chromatography-mass spectrometry.

Vitamin D is important because it has roles in maintaining musculoskeletal health, redox homeostasis, and the immune system; however, it is commonly dysregulated by endocrine disrupting chemicals, particularly phthalates and bisphenol A (BPA). Continuous exposure to phthalates and BPA may alter the endogenous metabolite profiles associated with vitamin D activity, although the specific metabolites are yet to be identified. In this study, we identified the endogenous metabolites altered by phthalates and BPA exposure through untargeted metabolic profiling and investigated the role of these metabolites in vitamin D activity. Plasma metabolic profiling using liquid chromatography-mass spectrometry was performed in two groups: severe 25-hydroxyvitamin D (25(OH)D) deficiency and high exposure to phthalates and BPA (Group A) and 25(OH)D deficiency and low exposure to phthalates and BPA (Group B). Multivariate analysis revealed a distinct separation between the two groups. A total of six metabolites were annotated, of which levels of two were significantly different between the two groups: platelet-activating factor (PAF) C16 or lysophosphatidylcholine (lysoPC) 18:0, and 11Z-eicosenamide. Plasma levels of PAF C16 or lysoPC 18:0 were increased in Group A and exhibited an area under the curve of 0.769 with an accuracy of 74.4% in a receiver operating characteristic curve analysis. These metabolites are generated as byproducts of lipid peroxidation, which supports the fact that phthalates and BPA induce oxidative stress in cells. Furthermore, PAF C16 and lysoPC 18:0 may be involved in the network that interferes with the antioxidant activity of vitamin D upon exposure to phthalates and BPA. This study results provide useful information on how the activity of vitamin D on the antioxidant system is inhibited when exposure to phthalates and BPA.

Simultaneous isolation and enumeration of virulent Vibrio cholerae and Vibrio vulnificus using an advanced MPN-PCR method.

Vibrio cholerae and Vibrio vulnificus are critical foodborne pathogens that need to be intensively controlled for their infection due to the intake and distribution of seafood, especially raw oysters. For this reason, various methods have already been developed for the detection and enumeration of these bacteria. The most probable number (MPN)-PCR (polymerase chain reaction) method is commonly used with the selective-differential medium for the efficiency and convenience of cell enumeration. One of the most frequently used for detecting Vibrio spp. is thiosulfate-citrate-bile salts-sucrose (TCBS) agar. But this selective-differential medium can fail to distinguish between V. cholerae, V. vulnificus, and Vibrio alginolyticus. For this reason, the conventional MPN-PCR method with TCBS medium for the detection of Vibrio spp. has a problem with processing PCR two times. This study suggests a simple and minimized detection method using one-time PCR and non-NaCl Luria-Bertani (LB-0) medium culture. This detection method is based on the difference in salt requirement between V. cholerae and V. vulnificus. Employing the developed methodology, the simultaneous cell enumeration of V. cholerae and V. vulnificus can be possible at a low cost. Furthermore, this study proposes a new specific primer to detect virulence-related genes from V. cholerae and V. vulnificus. This advanced MPN-PCR method was verified using bioaccumulated pacific oysters (Crassostrea gigas) by V. cholerae and V. vulnificus.

Nanocomposite synthesis strategies based on the transformation of well-tailored metal-organic frameworks.

Increasing the complexity of nanomaterials in terms of their structure and chemical composition has attracted significant attention, because it can yield unique scientific outcomes and considerable improvements for practical applications. Various approaches are being developed for the synthesis of nanostructured composites. Coordination polymers (CPs) emerged as new precursors in solid-state reactions for nanomaterials nearly two decades ago; the repetitively arranged inorganic and organic units can facilitate the production of nanoscale particles and porous carbon upon thermal decomposition. Metal-organic frameworks (MOFs), a subgroup of CPs featuring crystalline and porous structures, have subsequently become primary objects of interest in this field, as can be seen by the rapidly increasing number of reports on this topic. However, unique composite materials with increasingly complex nanostructures, which cannot be achieved via conventional methods, have been rarely realised, even though conventional MOF research has enabled the delicate control of structures at the molecular level and extensive applications as templates. In this regard, a comprehensive review of the fabrication strategies of MOF-based precursors and the thermal transformation into functional nanomaterials is provided herein, with a particular emphasis on the recent developments in nanocomposite research. We briefly introduce the roles and capabilities of MOFs in the synthesis of nanomaterials and subsequently discuss diverse synthetic routes for obtaining morphologically or compositionally advanced composite nanomaterials, based on our understanding of the MOF conversion mechanism.

Mechanochemistry as a Reconstruction Tool of Decomposed Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) undergo structural decomposition or phase transformation upon hydration in aqueous media or under harsh conditions, limiting their industrial commercialization. Herein, we present mechanochemical strategies to reconstruct four selected MOFs (MOF-5, MOF-177, UiO-67, and ZIF-65). To verify the effectiveness of this approach, these MOFs were intentionally decomposed in aqueous media and subsequently treated by ball milling under optimized conditions. As confirmed by X-ray diffraction analysis and N2 sorption isotherms, regardless of the MOF degradation pathway, the original structure could be recovered by a tailored mechanochemical reaction. This approach expands the practical applications of MOFs by enabling the regeneration of deteriorated MOFs quickly at a large scale.

Effectiveness of depuration of Pacific Oyster (Crassostrea gigas): removal of bioaccumulated Vibrio vulnificus by UV-treatment.

The present study aimed to evaluate the efficacy of a depuration system equipped with UV-irradiation to control Vibrio vulnificus infection such as septicemia (or sepsis) using alive oysters. After 6 h of bioaccumulation of V. vulnificus, Pacific oyster Crassostrea gigas were found to be contaminated by > 8.0 log MPN/g of V. vulnificus cells. After 60 h of depuration, the V. vulnificus cell number significantly decreased to < 4.0 log MPN/g. The present depuration process meets the standard effectiveness in reducing V. vulnificus cells by > 3.52 log and < 30 MPN/g as recommended by the National Shellfish Sanitization Procedure Molluscan Shellfish Control guidelines. Furthermore, no significant changes in pH value and glycogen content indicate that the depuration process did not affect the freshness and quality of the oyster samples. The present study could help control any potential infection associated with the consumption of raw oysters without losing their quality.

Design Thinking for Healthcare: Transliterating the Creative Problem-Solving Method Into Architectural Practice.

PURPOSE: The purpose of this article is to define design thinking, provide insights into how it may be integrated into the healthcare design process, and provide a checklist for future implementation. BACKGROUND: Design thinking is a collaborative method of inquiry that fosters innovative, team-generated solutions to complex scenarios, known as "wicked problems," that are extraordinarily difficult to solve. It is a practical tool in the toolbox of the codesign team, which includes the client and design professionals as primary stakeholders. It is powered by team-based creativity that adaptively responds to a need for new approaches and products in an innovative and practically applicable way. The need for design thinking in healthcare is steadily increasing as the healthcare system and its care environments continue to grow in complexity. Although major medical breakthroughs have undeniably expanded the average human life span, the current healthcare system is inefficient. Now, more than ever, design thinking and the innovative, human-centered solutions it enables are needed within healthcare design. Although the use of design thinking as a method within the field of architecture is not new, many design teams struggle integrating it fully within the design process, particularly in healthcare. The knowledge, design method, checklists, and direction provided in this article can benefit healthcare design teams to successfully integrate the method into practice. CONCLUSION: If design thinking is integrated into the healthcare architectural design process with the creative problem-solving method, opportunities will arise for innovative solutions and deeper insights into problems to benefit healthcare delivery.

Streptomycin mediated biofilm inhibition and suppression of virulence properties in Pseudomonas aeruginosa PAO1.

Pseudomonas aeruginosa is known as an opportunistic pathogen whose one of the antibiotic resistance mechanisms includes biofilm formation and virulence factor production. The present study showed that the sub-minimum inhibitory concentration (sub-MIC) of streptomycin inhibited the formation of biofilm and eradicated the established mature biofilm. Streptomycin at sub-MIC was also capable of inhibiting biofilm formation on the urinary catheters. In addition, the sub-MIC of streptomycin attenuated the bacterial virulence properties as confirmed by both phenotypic and gene expression studies. The optimal conditions for streptomycin to perform anti-biofilm and anti-virulence activities were proposed as alkaline TSB media (pH 7.9) at 35 °C. However, sub-MIC of streptomycin also exhibited a comparative anti-biofilm efficacy in LB media at similar pH level and temperature. Furthermore, this condition also improved the biofilm inhibition and eradication properties of streptomycin, tobramycin and tetracycline towards the biofilm formed by a clinical isolate of P. aeruginosa. Findings from the present study provide an important insight for further studies on the mechanisms of biofilm inhibition and dispersion of pre-existing biofilm by streptomycin as well as tobramycin and tetracycline under a specific culture environment.

Computer-aided discovery of connected metal-organic frameworks.

Composite metal-organic frameworks (MOFs) tend to possess complex interfaces that prevent facile and rational design. Here we present a joint computational/experimental workflow that screens thousands of MOFs and identifies the optimal MOF pairs that can seamlessly connect to one another by taking advantage of the fact that the metal nodes of one MOF can form coordination bonds with the linkers of the second MOF. Six MOF pairs (HKUST-1@MOF-5, HKUST-1@IRMOF-18, UiO-67@HKUST-1, PCN-68@MOF-5, UiO-66@MIL-88B(Fe) and UiO-67@MIL-88C(Fe)) yielded from our theoretical predictions were successfully synthesized, leading to clean single crystalline MOF@MOF, demonstrating the power of our joint workflow. Our work can serve as a starting point to accelerate the discovery of novel MOF composites that can potentially be used for many different applications.

Tuning of the flexibility in metal-organic frameworks based on pendant arm macrocycles.

An isostructural series of flexible metal-organic frameworks based on macrocycles having diverse pendant arms was developed to tune flexibility depending on functional groups. The pendant arms directing into the pores were found to play a key role in imparting different gate-opening behaviours in the threshold pressure and sorption capacity upon interaction with guest molecules.

Transformation of Metal-Organic Frameworks/Coordination Polymers into Functional Nanostructured Materials: Experimental Approaches Based on Mechanistic Insights.

Nanostructured materials such as porous metal oxides, metal nanoparticles, porous carbons, and their composites have been intensively studied due to their applications, including energy conversion and storage devices, catalysis, and gas storage. Appropriate precursors and synthetic methods are chosen for synthesizing the target materials. About a decade ago, metal-organic frameworks (MOFs) and coordination polymers (CPs) emerged as new precursors for these nanomaterials because they contain both organic and inorganic species that can play parallel roles as both a template and a precursor under given circumstances. Thermal conversions of MOFs offer a promising toolbox for synthesizing functional nanomaterials that are difficult to obtain using conventional methods. Although understanding the conversion mechanism is important for designing MOF precursors for the synthesis of nanomaterials with desired physicochemical properties, comprehensive discussions revealing the transformation mechanism remain insufficient. This Account reviews the utilization of MOFs/CPs as precursors and their transformation into functional nanomaterials with a special emphasis on understanding the relationship between the intrinsic nature of the parent MOFs and the daughter nanomaterials while discussing various experimental approaches based on mechanistic insights. We discuss nanomaterials categorized by materials such as metal-based nanomaterials and porous carbons. For metal-based nanomaterials transformed from MOFs, the nature of metal ions in the MOF scaffolds affects the physicochemical properties of the resultant materials including the phase, composite, and morphology of nanomaterials. Organic ligands are also involved in the in situ chemical reactions with metal species during thermal conversion. We describe these conversion mechanisms by classifying the phase of metal components in the resultant materials. Along with the metal species, carbon is a major element in MOFs, and thus, the appropriate choice of precursor MOFs and heat treatment can be expected to yield carbon-based nanomaterials. We address the relationship between the nature of the parent MOF and the porosity of the daughter carbon material-a controversial issue in the synthesis of porous carbons. Based on an understanding of the mechanism of MOF conversion, morphologically or compositionally advanced materials are synthesized by adopting appropriate MOF precursors and thermolysis conditions. Despite the progressive understanding of conversion phenomena of MOFs/CPs, this research field still has rooms to be explored and developed, ultimately in order to precisely control the properties of resultant nanomaterials. In this sense, we should pay more attention to the mechanism investigations of MOF conversion. We believe this Account will facilitate a deeper understanding of MOF/CP conversion routes and will accelerate further development in this field.

Exploration of Gate-Opening and Breathing Phenomena in a Tailored Flexible Metal-Organic Framework.

Flexible metal-organic frameworks (MOFs) show the structural transition phenomena, gate opening and breathing, upon the input of external stimuli. These phenomena have significant implications in their adsorptive applications. In this work, we demonstrate the direct capture of these gate-opening and breathing phenomena, triggered by CO2 molecules, in a well-designed flexible MOF composed of rotational sites and molecular gates. Combining X-ray single crystallographic data of a flexible MOF during gate opening/closing and breathing with in situ X-ray powder diffraction results uncovered the origin of this flexibility. Furthermore, computational studies revealed the specific sites required to open these gates by interaction with CO2 molecules.

Crystal-Size Effects on Carbon Dioxide Capture of a Covalently Alkylamine-Tethered Metal-Organic Framework Constructed by a One-Step Self-Assembly.

To enhance the carbon dioxide (CO2) uptake of metal-organic frameworks (MOFs), amine functionalization of their pore surfaces has been studied extensively. In general, amine-functionalized MOFs have been synthesized via post-synthetic modifications. Herein, we introduce a one-step construction of a MOF ([(NiLethylamine)(BPDC)] = MOFNH2; [NiLethylamine](2+) = [Ni(C12H32N8)](2+); BPDC(2-) = 4,4'-biphenyldicarboxylate) possessing covalently tethered alkylamine groups without post-synthetic modification. Two-amine groups per metal centre were introduced by this method. MOFNH2 showed enhanced CO2 uptake at elevated temperatures, attributed to active chemical interactions between the amine groups and the CO2 molecules. Due to the narrow channels of MOFNH2, the accessibility to the channel of CO2 is the limiting factor in its sorption behaviour. In this context, only crystal size reduction of MOFNH2 led to much faster and greater CO2 uptake at low pressures.

Thermal conversion of a tailored metal-organic framework into lithium silicate with an unusual morphology for efficient CO2 capture.

The conversion reaction of metal-organic frameworks (MOFs) was adopted as a synthetic method to produce an advanced CO2 absorbent. A Li- and Si-containing MOF is a good precursor for lithium orthosilicate (Li4SiO4); the resulting solid has an unusual coral-like morphology, which provides an enhanced CO2-sorption performance (high uptake and fast absorption).

Schizandra chinensis extracts induce apoptosis in human gastric cancer cells via JNK/p38 MAPK activation and the ROS-mediated/mitochondria-dependent pathway.

CONTEXT: Schizandra chinensis Baill (Magnoliaceae) fruit extract (SCE) is considered a traditional herbal medicine for the treatment and alleviation of various diseases. Gastric cancer is the second most common cause of cancer-related death worldwide, and the first most common in Korea. OBJECTIVES: This study investigates the mechanism of SCE-induced apoptosis in AGS human gastric cancer cells. MATERIALS AND METHODS: SCE concentrations from 100 to 400 µg/ml were used. Cell viabilities were determined using MTT assay. Members of the Bcl-2 family and Bax were detected by Western blotting. RT-PCR was performed to measure the expression level of the Fas/FasL pro-apoptotic genes. RESULTS: SCE inhibited the proliferation AGS cells for 24 or 72 h (inhibition by 3.1% ± 5.2% at 100 µg/ml and 87.3% ± 7.6% at 400 µg/ml at 24 h and by 40.2% ± 5.3% 100 µg/ml and 95.3% ± 1.3% 400 µg/ml at 72 h) and increased the sub-G1 phase (25.3% ± 5.2% at 100 µg/ml and 370.2% ± 7.2% at 400 µg/ml) and the mitochondrial membrane depolarization (11.2% ± 2.1% at 100 µg/ml and 311.5% ± 6.1% at 400 µg/ml). The SCE-induced apoptotic cell death showed the down-regulation of Bcl-2, but up-regulation of Bax. Subsequently, SCE increased the expression level of Fas/FasL, activated caspase-9 and -3, and increased reactive oxygen species generation. Also, JNK II inhibitor or a p38 MAPK inhibitor inhibited SCE-induced cell death. DISCUSSION AND CONCLUSION: These results indicate that SCE might be an effective chemotherapeutic for the treatment of human gastric cancer.

Nanoporous metal oxides with tunable and nanocrystalline frameworks via conversion of metal-organic frameworks.

Nanoporous metal oxide materials are ubiquitous in the material sciences because of their numerous potential applications in various areas, including adsorption, catalysis, energy conversion and storage, optoelectronics, and drug delivery. While synthetic strategies for the preparation of siliceous nanoporous materials are well-established, nonsiliceous metal oxide-based nanoporous materials still present challenges. Herein, we report a novel synthetic strategy that exploits a metal-organic framework (MOF)-driven, self-templated route toward nanoporous metal oxides via thermolysis under inert atmosphere. In this approach, an aliphatic ligand-based MOF is thermally converted to nanoporous metal oxides with highly nanocrystalline frameworks, in which aliphatic ligands act as the self-templates that are afterward evaporated to generate nanopores. We demonstrate this concept with hierarchically nanoporous magnesia (MgO) and ceria (CeO2), which have potential applicability for adsorption, catalysis, and energy storage. The pore size of these nanoporous metal oxides can be readily tuned by simple control of experimental parameters. Significantly, nanoporous MgO exhibits exceptional CO2 adsorption capacity (9.2 wt %) under conditions mimicking flue gas. This MOF-driven strategy can be expanded to other nanoporous monometallic and multimetallic oxides with a multitude of potential applications.

Characteristics of the cholecystokinin-induced depolarization of pacemaking activity in cultured interstitial cells of Cajal from murine small intestine.

BACKGROUND/AIMS: In this study, we studied the effects of cholecystokinin (CCK) on pacemaker potentials in cultured interstitial cells of Cajal (ICCs) from mouse small intestine using the whole cell patch clamp technique. METHODS: ICCs are pacemaker cells that exhibit periodic spontaneous depolarization, which is responsible for the production of slow waves in gastrointestinal smooth muscle, and generate periodic pacemaker potentials in current-clamp mode. RESULTS: Exposure to CCK (100 nM-5 µM) decreased the amplitudes of pacemaker potentials and depolarized resting membrane potentials. To identify the type of CCK receptors involved in ICCs, we examined the effects of CCK agonists and found that the addition of CCK1 agonist (A-71323, 1 µM) depolarized resting membrane potentials, whereas exposure to CCK2 agonist (gastrin, 1 µM) had no effect on pacemaker potentials. To confirm these results, we examined the effects of CCK antagonists and found that pretreatment with CCK1 antagonist (SR 27897, 1 µM) blocked CCK-induced effects. However, pretreatment with CCK2 antagonist (LY 225910, 1 µM) did not. Furthermore, intracellular GDPßS suppressed CCK-induced effects. To investigate the involvements of phospholipase C (PLC), protein kinase C (PKC), and protein kinase A (PKA) in the effects of CCK in cultured ICCs, we used U-73122 (an active PLC inhibitor), chelerythrine (a PKC inhibitor), SQ-22536 (an inhibitor of adenylate cyclase), or mPKAI (an inhibitor of myristoylated PKA). All inhibitors blocked the CCK-mediated effects on pacemaker potentials. In addition, we found that transient receptor potential classical 5 (TRPC5) channel was involved in CCK-activated currents in cultured ICCs. CONCLUSION: These results suggest that the CCK induced depolarization of pacemaking activity occurs in a G-protein-, PLC-, PKC-, and PKA-dependent manner via CCK1 receptor and TRPC5 channel is a candidate for CCK-activated currents in cultured ICCs in murine small intestine. Therefore, the ICCs are targets for CCK and their interaction can affect intestinal motility.

Luminescent Li-based metal-organic framework tailored for the selective detection of explosive nitroaromatic compounds: direct observation of interaction sites.

A luminescent lithium metal-organic framework (MOF) is constructed from the solvothermal reaction of Li(+) and a well-designed organic ligand, bis(4-carboxyphenyl)-N-methylamine (H(2)CPMA). A Li-based MOF can detect an explosive aromatic compound containing nitro groups as an explosophore, by showing a dramatic color change with concurrent luminescence quenching in the solid state. The detection sites are proven directly through single-crystal-to-single-crystal transformations, which show strong interactions between the aromatic rings of the electron-rich CPMA(2-) molecules and the electron-deficient nitrobenzene.

The isolation and characterization of simultaneous saccharification and fermentation microorganisms for Laminaria japonica utilization.

Brown seaweed contains various carbohydrates, such as alginate, laminaran, and mannitol, therefore ethanol fermentation was attempted with Nuruk and a mixed culture that included Laminaria japonica. Nuruk is used to make Korean traditional alcohol. In the research, four microorganisms that produced ethanol and had the ability to achieve alginate degradation were obtained on the L. japonica medium. Nuruk 4 was found to produce a better result than the other tested microorganisms, and the optimal substrate for ethanol production was found to be mannitol (2.59 g/L at 96 h). Nuruk 4 was more than three times better compared with Candida tropicalis in regards to ethanol production. When alginate lyase activity occurred, it appeared as a clear zone around Nuruk 3. The maximal ethanol production yield conditions were comprised of Nuruk 3 and 4 on the anaerobic culture. In this case, 2.0 g/L of ethanol were efficiently produced under the same conditions.